Re: Config space access to Mediatek MT7922 doesn't work after device reset in Xen PV dom0 (regression, Linux 6.12)

["Marek Marczykowski-Górecki" <marmarek@invisiblethingslab.com>]

[-- Attachment #1: Type: text/plain, Size: 4385 bytes --]

On Fri, Feb 07, 2025 at 04:00:36PM -0600, Bjorn Helgaas wrote:
> On Wed, Feb 05, 2025 at 11:14:17PM +0100, Marek Marczykowski-Górecki wrote:
> > On Thu, Jan 30, 2025 at 03:31:23PM -0600, Bjorn Helgaas wrote:
> > > On Thu, Jan 30, 2025 at 10:30:33AM +0100, Jan Beulich wrote:
> > > > On 30.01.2025 05:55, Marek Marczykowski-Górecki wrote:
> > > > > I've added logging of all config read/write to this device. Full log at
> > > > > [1].
> > > > ...
> 
> > ... Generally it looks like this device has broken FLR, and the
> > reset works due to the fallback to the secondary bus reset on
> > timeout. I repeated the test with my additional "&&
> > !PCI_POSSIBLE_ERROR(id)" and I got this:
> > [2] https://gist.github.com/marmarek/db0808702131b69ea2f66f339a55d71b
> > 
> > The first log is with xen, and the second with native linux (and
> > added PCI config space logging in drivers/pci/access.c).
> 
> This is just to annotate these logs.  Correct me if you see something
> wrong.

I think you all of that correct, yes.

> Both logs include this patch:
> 
>   @@ -1297,7 +1297,8 @@ static int pci_dev_wait(struct pci_dev *dev, char *reset_type, int timeout)
>                   if (root && root->config_rrs_sv) {
>                           pci_read_config_dword(dev, PCI_VENDOR_ID, &id);
>   -                     if (!pci_bus_rrs_vendor_id(id))
>   +                     if (!pci_bus_rrs_vendor_id(id) &&
>   +                         !PCI_POSSIBLE_ERROR(id))
>                                   break;
> 
> I think both logs show this sequence:
> 
>   - Initiate FLR on 01:00.0
> 
>   - In pci_dev_wait(), poll PCI_VENDOR_ID, looking for something other
>     than 0x0001 (which would indicate RRS response) or 0xffff (from
>     patch above).
> 
>   - Time out after ~70 seconds and return -ENOTTY.
> 
>   - Attempt Secondary Bus Reset using 00:02.2, the Root Port leading
>     to 01:00.0.
> 
>   - Successfully read PCI_VENDOR_ID.
> 
>   - Looks the same, whether linux is running natively or on top of
>     Xen.
> 
> Relevant devices (from mediatek-debug-6.12-patch2+bridgelog.log):
> 
>   00:02.2 PCI bridge: Advanced Micro Devices, Inc. [AMD] Phoenix GPP Bridge
>     Bus: primary=00, secondary=01, subordinate=01, sec-latency=0
> 
>   01:00.0 Network controller: MEDIATEK Corp. MT7922 802.11ax PCI Express Wireless Network Adapter
>     Capabilities: [80] Express (v2) Endpoint, IntMsgNum 0
> 
> From mediatek-debug-6.12-patch2+bridgelog.log (from [2] above):
> 
>   [anaconda root@test-12 /]# time echo 1 > /sys/bus/pci/devices/0000:01:00.0/reset
>   (XEN) d0v3 conf write cf8 0x80010088 bytes 2 offset 0 data 0xa910      <-- set 01:00.0 FLR
>   (XEN) d0v3 conf read cf8 0x80010000 bytes 4 offset 0 data 0xffffffff
>   ...
>   (XEN) d0v4 conf read cf8 0x80010000 bytes 4 offset 0 data 0xffffffff
>   ...
>   (XEN) d0v4 conf read cf8 0x8000123c bytes 2 offset 2 data 0x2          (0x3c + offset 2 = 0x3e)
>   (XEN) d0v4 conf write cf8 0x8000123c bytes 2 offset 2 data 0x42        <-- set 00:02.2 SBR
>   (XEN) d0v4 conf write cf8 0x8000123c bytes 2 offset 2 data 0x2
>   ...
>   (XEN) d0v4 conf read cf8 0x80010000 bytes 4 offset 0 data 0x61614c3    <-- 01:00.0 VID/DID
>   ...
>   real    1m10.825s
> 
> From mediatek-debug-native-6.12-patch2+bridgelog.log (also from [2]
> above):
> 
>   [anaconda root@test-12 ~]# time echo 1 > /sys/bus/pci/devices/0000:01:00.0/reset
>   [  240.449215] pciback 0000:01:00.0: resetting
>   [  240.450709] PCI: write bus 0x1 devfn 0x0 pos 0x88 size 2 value 0xa910   <-- set 01:00.0 FLR
>   [  240.553264] PCI: read bus 0x1 devfn 0x0 pos 0x0 size 4 value 0xffffffff
>   ...
>   [  309.481728] PCI: read bus 0x1 devfn 0x0 pos 0x0 size 4 value 0xffffffff
>   [  309.481747] pciback 0000:01:00.0: not ready 65535ms after FLR; giving up
>   ...
>   [  309.482667] PCI: read bus 0x0 devfn 0x12 pos 0x3e size 2 value 0x2      PCI_BRIDGE_CONTROL
>   [  309.482670] PCI: write bus 0x0 devfn 0x12 pos 0x3e size 2 value 0x42    <-- set 00:02.2 SBR
>   [  309.485184] PCI: write bus 0x0 devfn 0x12 pos 0x3e size 2 value 0x2
> 
>   ...
>   [  309.617782] PCI: read bus 0x1 devfn 0x0 pos 0x0 size 4 value 0x61614c3  <-- 01:00.0 VID/DID
>   [  309.629234] pciback 0000:01:00.0: reset done

-- 
Best Regards,
Marek Marczykowski-Górecki
Invisible Things Lab

[-- Attachment #2: signature.asc --]
[-- Type: application/pgp-signature, Size: 488 bytes --]