Re: [PATCH v3 00/11] Add a percpu subsection for cache hot data

[Ingo Molnar <mingo@kernel.org>]

* Brian Gerst <brgerst@gmail.com> wrote:

> Add a new percpu subsection for data that is frequently accessed and
> exclusive to each processor.  This replaces the pcpu_hot struct on x86,
> and is available to all architectures and the core kernel.
> 
> ffffffff834f5000 D __per_cpu_hot_start
> ffffffff834f5000 D hardirq_stack_ptr
> ffffffff834f5008 D __ref_stack_chk_guard
> ffffffff834f5008 D __stack_chk_guard
> ffffffff834f5010 D const_cpu_current_top_of_stack
> ffffffff834f5010 D cpu_current_top_of_stack
> ffffffff834f5018 D const_current_task
> ffffffff834f5018 D current_task
> ffffffff834f5020 D __x86_call_depth
> ffffffff834f5028 D this_cpu_off
> ffffffff834f5030 D __preempt_count
> ffffffff834f5034 D cpu_number
> ffffffff834f5038 D __softirq_pending
> ffffffff834f503a D hardirq_stack_inuse
> ffffffff834f503b D __per_cpu_hot_pad
> ffffffff834f5040 D __per_cpu_hot_end
> 
> This applies to the tip/x86/asm branch.
> 
> Changes in v3:
> - Fix typo of CACHE_HOT_DATA()
> - Move hardirq_stack_inuse to irq_64.c
> - Add __per_cpu_hot_pad to show the end of the actual data
> 
> Brian Gerst (11):
>   percpu: Introduce percpu hot section
>   x86/percpu: Move pcpu_hot to percpu hot section
>   x86/preempt: Move preempt count to percpu hot section
>   x86/smp: Move cpu number to percpu hot section
>   x86/retbleed: Move call depth to percpu hot section
>   x86/softirq: Move softirq_pending to percpu hot section
>   x86/irq: Move irq stacks to percpu hot section
>   x86/percpu: Move top_of_stack to percpu hot section
>   x86/percpu: Move current_task to percpu hot section
>   x86/stackprotector: Move __stack_chk_guard to percpu hot section
>   x86/smp: Move this_cpu_off to percpu hot section

>  31 files changed, 146 insertions(+), 111 deletions(-)

Yeah, so the result is that on x86-64 allmodconfig we now get:

  ld: percpu cache hot section too large

See the relevant .tmp_vmlinux1.map below.

Which is due to:

   CONFIG_X86_INTERNODE_CACHE_SHIFT=12

Increasing 'cache alignment' to 4096 bytes:

        PERCPU_SECTION(INTERNODE_CACHE_BYTES)

... because of the vSMP muck:

  config X86_INTERNODE_CACHE_SHIFT
        int
        default "12" if X86_VSMP
        default X86_L1_CACHE_SHIFT

The workaround would be to use L1_CACHE_BYTES in, but I really dislike 
what vSMP is doing here.

Anyway, I applied the short-term fix to patch 02/11, but I'm not sure 
it's the right fix.

Thanks,

	Ingo

=====================>
                0xffffffff8664f000                . = ALIGN (0x1000)
                0xffffffff8664f000                __per_cpu_hot_start = .
 *(SORT_BY_ALIGNMENT(.data..percpu..hot.*))
 .data..percpu..hot..hardirq_stack_ptr
                0xffffffff8664f000        0x8 vmlinux.o
                0xffffffff8664f000                hardirq_stack_ptr
 .data..percpu..hot..__stack_chk_guard
                0xffffffff8664f008        0x8 vmlinux.o
                0xffffffff8664f008                __stack_chk_guard
 .data..percpu..hot..cpu_current_top_of_stack
                0xffffffff8664f010        0x8 vmlinux.o
                0xffffffff8664f010                cpu_current_top_of_stack
 .data..percpu..hot..current_task
                0xffffffff8664f018        0x8 vmlinux.o
                0xffffffff8664f018                current_task
 .data..percpu..hot..__x86_call_depth
                0xffffffff8664f020        0x8 vmlinux.o
                0xffffffff8664f020                __x86_call_depth
 .data..percpu..hot..this_cpu_off
                0xffffffff8664f028        0x8 vmlinux.o
                0xffffffff8664f028                this_cpu_off
 .data..percpu..hot..__preempt_count
                0xffffffff8664f030        0x4 vmlinux.o
                0xffffffff8664f030                __preempt_count
 .data..percpu..hot..cpu_number
                0xffffffff8664f034        0x4 vmlinux.o
                0xffffffff8664f034                cpu_number
 .data..percpu..hot..__softirq_pending
                0xffffffff8664f038        0x2 vmlinux.o
                0xffffffff8664f038                __softirq_pending
 .data..percpu..hot..hardirq_stack_inuse
                0xffffffff8664f03a        0x1 vmlinux.o
                0xffffffff8664f03a                hardirq_stack_inuse
                0xffffffff8664f03b                __per_cpu_hot_pad = .
                0xffffffff86650000                . = ALIGN (0x1000)
 *fill*         0xffffffff8664f03b      0xfc5 
                0xffffffff86650000                __per_cpu_hot_end = .
 *(.data..percpu..read_mostly)
 .data..percpu..read_mostly
                0xffffffff86650000      0xa30 vmlinux.o

=================>

 arch/x86/kernel/vmlinux.lds.S | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/arch/x86/kernel/vmlinux.lds.S b/arch/x86/kernel/vmlinux.lds.S
index 9ac6b42701fa..31f9102b107f 100644
--- a/arch/x86/kernel/vmlinux.lds.S
+++ b/arch/x86/kernel/vmlinux.lds.S
@@ -330,7 +330,7 @@ SECTIONS
 		EXIT_DATA
 	}
 
-	PERCPU_SECTION(INTERNODE_CACHE_BYTES)
+	PERCPU_SECTION(L1_CACHE_BYTES)
 	ASSERT(__per_cpu_hot_end - __per_cpu_hot_start <= 64, "percpu cache hot section too large")
 
 	RUNTIME_CONST_VARIABLES