Re: [Linaro-mm-sig] [PATCH 2/3] udmabuf: Sync buffer mappings for attached devices

[Daniel Vetter <daniel@ffwll.ch>]

On Tue, Jan 23, 2024 at 04:12:26PM -0600, Andrew Davis wrote:
> Currently this driver creates a SGT table using the CPU as the
> target device, then performs the dma_sync operations against
> that SGT. This is backwards to how DMA-BUFs are supposed to behave.
> This may have worked for the case where these buffers were given
> only back to the same CPU that produced them as in the QEMU case.
> And only then because the original author had the dma_sync
> operations also backwards, syncing for the "device" on begin_cpu.
> This was noticed and "fixed" in this patch[0].
> 
> That then meant we were sync'ing from the CPU to the CPU using
> a pseudo-device "miscdevice". Which then caused another issue
> due to the miscdevice not having a proper DMA mask (and why should
> it, the CPU is not a DMA device). The fix for that was an even
> more egregious hack[1] that declares the CPU is coherent with
> itself and can access its own memory space..
> 
> Unwind all this and perform the correct action by doing the dma_sync
> operations for each device currently attached to the backing buffer.
> 
> [0] commit 1ffe09590121 ("udmabuf: fix dma-buf cpu access")
> [1] commit 9e9fa6a9198b ("udmabuf: Set the DMA mask for the udmabuf device (v2)")
> 
> Signed-off-by: Andrew Davis <afd@ti.com>

So yeah the above hacks are terrible, but I don't think this is better.
What you're doing now is that you're potentially doing the flushing
multiple times, so if you have a lot of importers with life mappings this
is a performance regression.

It's probably time to bite the bullet and teach the dma-api about flushing
for multiple devices. Or some way we can figure out which is the one
device we need to pick which gives us the right amount of flushing.

Cheers, Sima

> ---
>  drivers/dma-buf/udmabuf.c | 41 +++++++++++++++------------------------
>  1 file changed, 16 insertions(+), 25 deletions(-)
> 
> diff --git a/drivers/dma-buf/udmabuf.c b/drivers/dma-buf/udmabuf.c
> index 3a23f0a7d112a..ab6764322523c 100644
> --- a/drivers/dma-buf/udmabuf.c
> +++ b/drivers/dma-buf/udmabuf.c
> @@ -26,8 +26,6 @@ MODULE_PARM_DESC(size_limit_mb, "Max size of a dmabuf, in megabytes. Default is
>  struct udmabuf {
>  	pgoff_t pagecount;
>  	struct page **pages;
> -	struct sg_table *sg;
> -	struct miscdevice *device;
>  	struct list_head attachments;
>  	struct mutex lock;
>  };
> @@ -169,12 +167,8 @@ static void unmap_udmabuf(struct dma_buf_attachment *at,
>  static void release_udmabuf(struct dma_buf *buf)
>  {
>  	struct udmabuf *ubuf = buf->priv;
> -	struct device *dev = ubuf->device->this_device;
>  	pgoff_t pg;
>  
> -	if (ubuf->sg)
> -		put_sg_table(dev, ubuf->sg, DMA_BIDIRECTIONAL);
> -
>  	for (pg = 0; pg < ubuf->pagecount; pg++)
>  		put_page(ubuf->pages[pg]);
>  	kfree(ubuf->pages);
> @@ -185,33 +179,31 @@ static int begin_cpu_udmabuf(struct dma_buf *buf,
>  			     enum dma_data_direction direction)
>  {
>  	struct udmabuf *ubuf = buf->priv;
> -	struct device *dev = ubuf->device->this_device;
> -	int ret = 0;
> -
> -	if (!ubuf->sg) {
> -		ubuf->sg = get_sg_table(dev, buf, direction);
> -		if (IS_ERR(ubuf->sg)) {
> -			ret = PTR_ERR(ubuf->sg);
> -			ubuf->sg = NULL;
> -		}
> -	} else {
> -		dma_sync_sg_for_cpu(dev, ubuf->sg->sgl, ubuf->sg->nents,
> -				    direction);
> -	}
> +	struct udmabuf_attachment *a;
>  
> -	return ret;
> +	mutex_lock(&ubuf->lock);
> +
> +	list_for_each_entry(a, &ubuf->attachments, list)
> +		dma_sync_sgtable_for_cpu(a->dev, a->table, direction);
> +
> +	mutex_unlock(&ubuf->lock);
> +
> +	return 0;
>  }
>  
>  static int end_cpu_udmabuf(struct dma_buf *buf,
>  			   enum dma_data_direction direction)
>  {
>  	struct udmabuf *ubuf = buf->priv;
> -	struct device *dev = ubuf->device->this_device;
> +	struct udmabuf_attachment *a;
>  
> -	if (!ubuf->sg)
> -		return -EINVAL;
> +	mutex_lock(&ubuf->lock);
> +
> +	list_for_each_entry(a, &ubuf->attachments, list)
> +		dma_sync_sgtable_for_device(a->dev, a->table, direction);
> +
> +	mutex_unlock(&ubuf->lock);
>  
> -	dma_sync_sg_for_device(dev, ubuf->sg->sgl, ubuf->sg->nents, direction);
>  	return 0;
>  }
>  
> @@ -307,7 +299,6 @@ static long udmabuf_create(struct miscdevice *device,
>  	exp_info.priv = ubuf;
>  	exp_info.flags = O_RDWR;
>  
> -	ubuf->device = device;
>  	buf = dma_buf_export(&exp_info);
>  	if (IS_ERR(buf)) {
>  		ret = PTR_ERR(buf);
> -- 
> 2.39.2
> 
> _______________________________________________
> Linaro-mm-sig mailing list -- linaro-mm-sig@lists.linaro.org
> To unsubscribe send an email to linaro-mm-sig-leave@lists.linaro.org

-- 
Daniel Vetter
Software Engineer, Intel Corporation
http://blog.ffwll.ch