Re: [PATCH 14/15] usb: typec: tcpm/tcpci_maxim: convert to dev_err_probe()

[Heikki Krogerus <heikki.krogerus@linux.intel.com>]

On Wed, Jul 10, 2024 at 11:36:21AM +0100, André Draszik wrote:
> dev_err_probe() exists as a useful helper ensuring standardized
> error messages during .probe() and using it also helps to make
> the code more legible.
> 
> Use it.
> 
> Signed-off-by: André Draszik <andre.draszik@linaro.org>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  drivers/usb/typec/tcpm/tcpci_maxim_core.c | 21 +++++++++++----------
>  1 file changed, 11 insertions(+), 10 deletions(-)
> 
> diff --git a/drivers/usb/typec/tcpm/tcpci_maxim_core.c b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> index 5b5441db7047..ee3e86797f17 100644
> --- a/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> +++ b/drivers/usb/typec/tcpm/tcpci_maxim_core.c
> @@ -484,17 +484,17 @@ static int max_tcpci_probe(struct i2c_client *client)
>  
>  	chip->client = client;
>  	chip->data.regmap = devm_regmap_init_i2c(client, &max_tcpci_regmap_config);
> -	if (IS_ERR(chip->data.regmap)) {
> -		dev_err(&client->dev, "Regmap init failed\n");
> -		return PTR_ERR(chip->data.regmap);
> -	}
> +	if (IS_ERR(chip->data.regmap))
> +		return dev_err_probe(&client->dev, PTR_ERR(chip->data.regmap),
> +				     "Regmap init failed\n");
>  
>  	chip->dev = &client->dev;
>  	i2c_set_clientdata(client, chip);
>  
>  	ret = max_tcpci_read8(chip, TCPC_POWER_STATUS, &power_status);
>  	if (ret < 0)
> -		return ret;
> +		return dev_err_probe(&client->dev, ret,
> +				     "Failed to read TCPC_POWER_STATUS\n");
>  
>  	/* Chip level tcpci callbacks */
>  	chip->data.set_vbus = max_tcpci_set_vbus;
> @@ -511,10 +511,10 @@ static int max_tcpci_probe(struct i2c_client *client)
>  
>  	max_tcpci_init_regs(chip);
>  	chip->tcpci = tcpci_register_port(chip->dev, &chip->data);
> -	if (IS_ERR(chip->tcpci)) {
> -		dev_err(&client->dev, "TCPCI port registration failed\n");
> -		return PTR_ERR(chip->tcpci);
> -	}
> +	if (IS_ERR(chip->tcpci))
> +		return dev_err_probe(&client->dev, PTR_ERR(chip->tcpci),
> +				     "TCPCI port registration failed\n");
> +
>  	chip->port = tcpci_get_tcpm_port(chip->tcpci);
>  	ret = max_tcpci_init_alert(chip, client);
>  	if (ret < 0)
> @@ -526,7 +526,8 @@ static int max_tcpci_probe(struct i2c_client *client)
>  unreg_port:
>  	tcpci_unregister_port(chip->tcpci);
>  
> -	return ret;
> +	return dev_err_probe(&client->dev, ret,
> +			     "Maxim TCPCI driver initialization failed\n");
>  }
>  
>  static void max_tcpci_remove(struct i2c_client *client)
> 
> -- 
> 2.45.2.803.g4e1b14247a-goog

-- 
heikki