* [PATCH v2 1/1] usb: typec: stusb160x: Make use of i2c_get_match_data()
@ 2024-09-26 12:29 Andy Shevchenko
2024-09-26 14:56 ` Heikki Krogerus
0 siblings, 1 reply; 2+ messages in thread
From: Andy Shevchenko @ 2024-09-26 12:29 UTC (permalink / raw)
To: Andy Shevchenko, linux-usb, linux-kernel
Cc: Heikki Krogerus, Greg Kroah-Hartman
Get matching data in one step by switching to use i2c_get_match_data().
As a positive side effect the matching data is qualified as a constant.
Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
---
v2: fixed rebase issue which led to the compilation error (LKP)
drivers/usb/typec/stusb160x.c | 7 +++----
1 file changed, 3 insertions(+), 4 deletions(-)
diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
index f3140fc04c12..6d85b25b40bc 100644
--- a/drivers/usb/typec/stusb160x.c
+++ b/drivers/usb/typec/stusb160x.c
@@ -633,9 +633,8 @@ MODULE_DEVICE_TABLE(of, stusb160x_of_match);
static int stusb160x_probe(struct i2c_client *client)
{
+ const struct regmap_config *regmap_config;
struct stusb160x *chip;
- const struct of_device_id *match;
- struct regmap_config *regmap_config;
struct fwnode_handle *fwnode;
int ret;
@@ -645,8 +644,8 @@ static int stusb160x_probe(struct i2c_client *client)
i2c_set_clientdata(client, chip);
- match = i2c_of_match_device(stusb160x_of_match, client);
- regmap_config = (struct regmap_config *)match->data;
+ regmap_config = i2c_get_match_data(client);
+
chip->regmap = devm_regmap_init_i2c(client, regmap_config);
if (IS_ERR(chip->regmap)) {
ret = PTR_ERR(chip->regmap);
--
2.43.0.rc1.1336.g36b5255a03ac
^ permalink raw reply related [flat|nested] 2+ messages in thread
* Re: [PATCH v2 1/1] usb: typec: stusb160x: Make use of i2c_get_match_data()
2024-09-26 12:29 [PATCH v2 1/1] usb: typec: stusb160x: Make use of i2c_get_match_data() Andy Shevchenko
@ 2024-09-26 14:56 ` Heikki Krogerus
0 siblings, 0 replies; 2+ messages in thread
From: Heikki Krogerus @ 2024-09-26 14:56 UTC (permalink / raw)
To: Andy Shevchenko; +Cc: linux-usb, linux-kernel, Greg Kroah-Hartman
On Thu, Sep 26, 2024 at 03:29:15PM +0300, Andy Shevchenko wrote:
> Get matching data in one step by switching to use i2c_get_match_data().
> As a positive side effect the matching data is qualified as a constant.
>
> Signed-off-by: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>
> ---
> v2: fixed rebase issue which led to the compilation error (LKP)
> drivers/usb/typec/stusb160x.c | 7 +++----
> 1 file changed, 3 insertions(+), 4 deletions(-)
>
> diff --git a/drivers/usb/typec/stusb160x.c b/drivers/usb/typec/stusb160x.c
> index f3140fc04c12..6d85b25b40bc 100644
> --- a/drivers/usb/typec/stusb160x.c
> +++ b/drivers/usb/typec/stusb160x.c
> @@ -633,9 +633,8 @@ MODULE_DEVICE_TABLE(of, stusb160x_of_match);
>
> static int stusb160x_probe(struct i2c_client *client)
> {
> + const struct regmap_config *regmap_config;
> struct stusb160x *chip;
> - const struct of_device_id *match;
> - struct regmap_config *regmap_config;
> struct fwnode_handle *fwnode;
> int ret;
>
> @@ -645,8 +644,8 @@ static int stusb160x_probe(struct i2c_client *client)
>
> i2c_set_clientdata(client, chip);
>
> - match = i2c_of_match_device(stusb160x_of_match, client);
> - regmap_config = (struct regmap_config *)match->data;
> + regmap_config = i2c_get_match_data(client);
> +
> chip->regmap = devm_regmap_init_i2c(client, regmap_config);
> if (IS_ERR(chip->regmap)) {
> ret = PTR_ERR(chip->regmap);
> --
> 2.43.0.rc1.1336.g36b5255a03ac
--
heikki
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2024-09-26 14:56 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2024-09-26 12:29 [PATCH v2 1/1] usb: typec: stusb160x: Make use of i2c_get_match_data() Andy Shevchenko
2024-09-26 14:56 ` Heikki Krogerus
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox