Re: [PATCH v5 1/3] dt-bindings: thermal: sophgo,cv1800-thermal: Add Sophgo CV1800 thermal

[Haylen Chu <heylenay@4d2.org>]

On Tue, Oct 15, 2024 at 07:55:10AM +0200, Krzysztof Kozlowski wrote:
> On Mon, Oct 14, 2024 at 07:38:11AM +0000, Haylen Chu wrote:
> > Add devicetree binding documentation for thermal sensors integrated in
> > Sophgo CV1800 SoCs.
> > 
> > Signed-off-by: Haylen Chu <heylenay@4d2.org>
> > ---
> >  .../thermal/sophgo,cv1800-thermal.yaml        | 57 +++++++++++++++++++
> >  1 file changed, 57 insertions(+)
> >  create mode 100644 Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > 
> > diff --git a/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > new file mode 100644
> > index 000000000000..14abeb7a272a
> > --- /dev/null
> > +++ b/Documentation/devicetree/bindings/thermal/sophgo,cv1800-thermal.yaml
> > @@ -0,0 +1,57 @@
> > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > +%YAML 1.2
> > +---
> > +$id: http://devicetree.org/schemas/thermal/sophgo,cv1800-thermal.yaml#
> > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > +
> > +title: Sophgo CV1800 on-SoC Thermal Sensor
> > +
> > +maintainers:
> > +  - Haylen Chu <heylenay@4d2.org>
> > +
> > +description: Sophgo CV1800 on-SoC thermal sensor
> > +
> > +$ref: thermal-sensor.yaml#
> > +
> > +properties:
> > +  compatible:
> > +    enum:
> > +      - sophgo,cv1800-thermal
> > +
> > +  reg:
> > +    maxItems: 1
> > +
> > +  clocks:
> > +    maxItems: 1
> > +
> > +  interrupts:
> > +    maxItems: 1
> > +
> > +  sample-rate-hz:
> > +    minimum: 1
> > +    maximum: 1908
> > +    default: 1
> 
> 1. Why this is a property of a board?
> 2. I do not see this property defined in any common schema and I am not
> sure if it even should. Sample rate appears from time to time, but not
> in context of thermal sensors, so this should have vendor prefix.

Thanks, I decide to remove this property.

Best regards,
Haylen Chu