From: <Codrin.Ciubotariu@microchip.com>
To: <afd@ti.com>, <lgirdwood@gmail.com>, <broonie@kernel.org>
Cc: <dannenberg@ti.com>, <alsa-devel@alsa-project.org>,
<linux-kernel@vger.kernel.org>
Subject: Re: [PATCH v2 2/2] ASoC: codecs: pcm186x: Fix energysense SLEEP bit
Date: Wed, 20 Feb 2019 10:56:55 +0000 [thread overview]
Message-ID: <a1e133fe-2fdf-db02-4fe2-6b5e259191b7@microchip.com> (raw)
In-Reply-To: <eba29760-9ef7-9490-9f46-b3dbdf43ee05@ti.com>
On 19.02.2019 19:06, Andrew F. Davis wrote:
> On 2/19/19 10:29 AM, Codrin.Ciubotariu@microchip.com wrote:
>> From: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
>>
>> The ADCs are sleeping when the SLEEP bit is set and running when it's
>> cleared, so the bit should be inverted.
>> Tested on pcm1863.
>>
>
> Did this work for you before? Strange it would if reversed, I wonder if
> the SLEEP bit is really doing anything here. Can investigate later, for
> this patch:
The SLEEP bit seems to work. At least STATE from register 114 says the
IP is sleeping. Without this change, if pcm1863 is used as master, I can
see BCK and LRCK generated while no sound is played. Once I start an
audio stream, the clocks stop.
Thank you for your ACK. I would really appreciate if you could also test
it on your side.
Best regards,
Codrin
>
> Acked-by: Andrew F. Davis <afd@ti.com>
>
>> Signed-off-by: Codrin Ciubotariu <codrin.ciubotariu@microchip.com>
>> ---
>>
>> Changes in v2:
>> - none;
>>
>> sound/soc/codecs/pcm186x.c | 6 +++---
>> 1 file changed, 3 insertions(+), 3 deletions(-)
>>
>> diff --git a/sound/soc/codecs/pcm186x.c b/sound/soc/codecs/pcm186x.c
>> index c36a391fec8a..c5fcc632f670 100644
>> --- a/sound/soc/codecs/pcm186x.c
>> +++ b/sound/soc/codecs/pcm186x.c
>> @@ -158,7 +158,7 @@ static const struct snd_soc_dapm_widget pcm1863_dapm_widgets[] = {
>> * Put the codec into SLEEP mode when not in use, allowing the
>> * Energysense mechanism to operate.
>> */
>> - SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1, 0),
>> + SND_SOC_DAPM_ADC("ADC", "HiFi Capture", PCM186X_POWER_CTRL, 1, 1),
>> };
>>
>> static const struct snd_soc_dapm_widget pcm1865_dapm_widgets[] = {
>> @@ -184,8 +184,8 @@ static const struct snd_soc_dapm_widget pcm1865_dapm_widgets[] = {
>> * Put the codec into SLEEP mode when not in use, allowing the
>> * Energysense mechanism to operate.
>> */
>> - SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1, 0),
>> - SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1, 0),
>> + SND_SOC_DAPM_ADC("ADC1", "HiFi Capture 1", PCM186X_POWER_CTRL, 1, 1),
>> + SND_SOC_DAPM_ADC("ADC2", "HiFi Capture 2", PCM186X_POWER_CTRL, 1, 1),
>> };
>>
>> static const struct snd_soc_dapm_route pcm1863_dapm_routes[] = {
>>
next prev parent reply other threads:[~2019-02-20 10:59 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2019-02-19 16:29 [PATCH v2 1/2] ASoC: codecs: pcm186x: fix wrong usage of DECLARE_TLV_DB_SCALE() Codrin.Ciubotariu
2019-02-19 16:29 ` [PATCH v2 2/2] ASoC: codecs: pcm186x: Fix energysense SLEEP bit Codrin.Ciubotariu
2019-02-19 16:56 ` Mark Brown
2019-02-19 17:06 ` Andrew F. Davis
2019-02-19 17:18 ` Mark Brown
2019-02-20 10:56 ` Codrin.Ciubotariu [this message]
2019-02-19 17:05 ` [PATCH v2 1/2] ASoC: codecs: pcm186x: fix wrong usage of DECLARE_TLV_DB_SCALE() Andrew F. Davis
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=a1e133fe-2fdf-db02-4fe2-6b5e259191b7@microchip.com \
--to=codrin.ciubotariu@microchip.com \
--cc=afd@ti.com \
--cc=alsa-devel@alsa-project.org \
--cc=broonie@kernel.org \
--cc=dannenberg@ti.com \
--cc=lgirdwood@gmail.com \
--cc=linux-kernel@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox