* [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes
@ 2026-11-13 23:52 Enver Ikromov
2026-11-13 23:52 ` [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx() Enver Ikromov
` (10 more replies)
0 siblings, 11 replies; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
This series fixes a NULL pointer dereference and a negative rate index
bug on the rtw89 TX path for injected frames, makes monitor mode
receive frames that are currently dropped by the hardware RX filter
without disabling hardware Auto-ACK on concurrent active interfaces,
enables raw 802.11 frame injection on standalone and concurrent
MONITOR_FLAG_ACTIVE monitor interfaces, and restores the operating
channel when leaving idle on devices using mac80211 chanctx emulation.
Patches 1-2 are standalone bug fixes with Fixes: and Cc: stable tags:
1. drop frames without a vif instead of dereferencing NULL in
rtw89_ops_tx() (reachable when injecting on a passive monitor
interface while a station interface is up)
2. treat the radiotap "no rate" index (-1) as signed in
rtw89_core_tx_update_injection()
Patch 3 retains FIF_CONTROL | FIF_PSPOLL, tracks FIF_OTHER_BSS in
rtwdev->hal.rx_fltr_other_bss, and clears target-address, multicast,
CAM, beacon check, and UID filter drop bits whenever B_AX_SNIFFER_MODE
or rx_fltr_other_bss is active (including across scan/ROC/MAC reinit
restores) while keeping B_AX_SNIFFER_MODE restricted to pure passive
monitor mode so hardware Auto-ACK remains intact for concurrent STA/AP
and MONITOR_FLAG_ACTIVE interfaces.
Patches 4-9 enable raw frame injection on standalone and active monitor
interfaces:
4. RCU protection and sole-monitor tracking for pure_monitor_mode_vif
with optional deferred RCU synchronization
5. RTW89_SELF_ROLE_AP for monitor interfaces so the JoinInfo H2C
initializes the MAC ID's CMAC control entry without arming client
TBTT tracking or AP beacon transmission
6. resolve standalone NULL-vif TX via pure_monitor_mode_vif and direct
MONITOR_FLAG_ACTIVE vif TX via rtwvif->mon_tx_ready with coalesced
synchronize_rcu(), track rtwdev->monitor_vifs for radiotap/PHYSTS
enablement, parse frequency IEs before pushing VHT/HE/EHT radiotap
headers during concurrent scans, and validate linear 802.11 header
lengths via skb_headlen()
7. route injected control frames through the management queue and
guard hdr->seq_ctrl reads on short/control frames
8. skip host-side IP/UDP traffic stats, WoWLAN AKM parsing, BT-coex,
HE HTC, and A-MPDU/TXQ aggregation hooks on injected frames
9. honor IEEE80211_TX_CTL_ASSIGN_SEQ, IEEE80211_TX_RC_USE_RTS_CTS,
IEEE80211_RADIOTAP_DATA_RETRIES (hw->max_rate_tries = 63), and
IEEE80211_TX_CTL_NO_ACK across AX/BE TX descriptors and PCIe/RPQ
TX completion status
Patch 10 restores hw->conf.chandef when leaving idle or toggling
monitor mode on devices without assign_vif_chanctx while RTW89_PHY_0 is
inactive after rtw89_ops_stop() / rtw89_enter_ips().
Verification:
- Firmware behavior in patches 3, 5, and 10 was verified against
RTL8852AE firmware 0.13.36.2 (JoinInfo H2C role/CCTL handling,
scan-offload RX filter pause/restore, and absence of BEACON_FILTER
forcing no_chanctx even with support_chanctx_num == 1).
- Each patch builds cleanly in isolation on rtw-next (Linux 7.4-rc1)
with W=1, C=1 (sparse), and CONFIG_PROVE_LOCKING=y, and passes
checkpatch.pl --strict without warnings.
- Runtime hardware validation was conducted on RTL8852AE (10ec:8852,
firmware rtw89/rtw8852a_fw-1.bin 0.13.36.2, Linux 7.1.5): promiscuous
RX across down/up restart (ftrace confirmed channel/RFK programming),
NULL-vif drop on passive monitor while a station interface is up vs
concurrent MONITOR_FLAG_ACTIVE raw TX + Auto-ACK preservation,
10B ACK / 16B RTS / SN=1337 Data & AssocReq raw TX, NO_ACK vs
DATA_RETRIES tx_retry_lmt telemetry verification, and 25 concurrent
del/add RCU stress cycles (0 dmesg alerts).
RTL8852B/C, RTL8851B, RTL8922A (BE), USB devices, and DBCC setups were
not runtime-tested.
Changes in v5:
- Split the NULL vif fix and signed rate index fix out as standalone
patches 1-2 with Fixes: and Cc: stable tags.
- Split monitor injection into focused patches 5-9 and support
concurrent MONITOR_FLAG_ACTIVE interfaces alongside standalone
passive monitors while coalescing synchronize_rcu() on teardown.
- Route only injected control frames through the management path so
mac80211-generated BlockAckReq frames keep the normal data path.
- Separate FIF_OTHER_BSS drop-mask clearing from B_AX_SNIFFER_MODE so
arbitrary-BSS RX works on MONITOR_FLAG_ACTIVE without suppressing
hardware Auto-ACK on active interfaces.
- Advertise hw->max_rate_tries = 63, honor rates[0].count, and avoid
false tx_retry_lmt increments on single-shot NO_ACK completions.
- Gate channel restoration on leaving idle / monitor changes with
!rtwdev->ops->assign_vif_chanctx so non-chanctx devices (such as
RTL8852AE) activate RTW89_PHY_0 for both standalone and active
monitor interfaces.
Changes in v4:
- Use full legal name in From/Signed-off-by.
- Retain FIF_CONTROL and FIF_PSPOLL and clear B_AX_A_MC and
B_AX_A_MC_LIST_CAM_MATCH in monitor mode.
- Split RCU conversion of pure_monitor_mode_vif into its own patch.
- Handle injected control frames, negative rate indices, NO_ACK, and
sequence number preservation.
- Move monitor restart channel restoration into rtw89_ops_config().
Changes in v3:
- Split into a patch series.
- Dropped direct register writes in favor of driver abstractions.
- Added RCU synchronization around pure_monitor_mode_vif.
v4: not sent to the list
v3: https://lore.kernel.org/linux-wireless/20261104203051.564-1-owner@ph4ntom-rev.uz/
v2: https://lore.kernel.org/linux-wireless/179371849554.20972.16232816164394690660@ph4ntom-rev.uz/
v1 (RFC): https://lore.kernel.org/linux-wireless/1a196d6dfbc.35537d221913104450.3720060455831933789@zoho.com/
Enver Ikromov (10):
wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx()
wifi: rtw89: handle negative rate index for injected frames
wifi: rtw89: fix RX filter configuration for monitor mode
wifi: rtw89: protect pure_monitor_mode_vif with RCU
wifi: rtw89: use AP self role for monitor interfaces
wifi: rtw89: transmit frames from monitor interfaces
wifi: rtw89: send injected control frames through the management path
wifi: rtw89: skip host-side TX hooks for injected frames
wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK for injected frames
wifi: rtw89: restore channel when leaving idle on non-chanctx devices
drivers/net/wireless/realtek/rtw89/core.c | 144 ++++++++++++++----
drivers/net/wireless/realtek/rtw89/core.h | 17 ++-
drivers/net/wireless/realtek/rtw89/mac.c | 3 +-
drivers/net/wireless/realtek/rtw89/mac.h | 18 +++
drivers/net/wireless/realtek/rtw89/mac80211.c | 131 +++++++++++++++-
drivers/net/wireless/realtek/rtw89/mac_be.c | 3 +-
drivers/net/wireless/realtek/rtw89/pci.c | 3 +-
drivers/net/wireless/realtek/rtw89/phy.c | 2 +-
8 files changed, 278 insertions(+), 43 deletions(-)
base-commit: 61a5eb87b2d9b4d5e353780b781cf691f39ba9e1
--
2.56.0.windows.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx()
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-15 3:23 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 02/10] wifi: rtw89: handle negative rate index for injected frames Enver Ikromov
` (9 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
rtw89 sets IEEE80211_HW_WANT_MONITOR_VIF but not
IEEE80211_HW_QUEUE_CONTROL. For frames transmitted on a monitor
interface, ieee80211_tx_frags() therefore passes
info->control.vif == NULL to the driver whenever local->monitor_sdata
does not exist, e.g. when a raw frame is sent on a monitor interface
while a station interface is also up and the frame's addr2 does not
match any running interface.
rtw89_ops_tx() unconditionally converts the vif with vif_to_rtwvif()
and dereferences rtwvif->offchan, so such a frame makes the kernel
access memory at a small offset from NULL.
Drop frames without a vif, as there is no MAC ID or port they could
be transmitted on.
Fixes: a0e97ae3f332 ("wifi: rtw89: add ieee80211::remain_on_channel ops")
Cc: stable@vger.kernel.org
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/mac80211.c | 9 ++++++++-
1 file changed, 8 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index 9134cdc..5a12639 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -23,11 +23,18 @@ static void rtw89_ops_tx(struct ieee80211_hw *hw,
struct rtw89_dev *rtwdev = hw->priv;
struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_vif *vif = info->control.vif;
- struct rtw89_vif *rtwvif = vif_to_rtwvif(vif);
struct ieee80211_sta *sta = control->sta;
u32 flags = IEEE80211_SKB_CB(skb)->flags;
+ struct rtw89_vif *rtwvif;
int ret, qsel;
+ if (unlikely(!vif)) {
+ ieee80211_free_txskb(hw, skb);
+ return;
+ }
+
+ rtwvif = vif_to_rtwvif(vif);
+
if (rtwvif->offchan && !(flags & IEEE80211_TX_CTL_TX_OFFCHAN) && sta) {
struct rtw89_sta *rtwsta = sta_to_rtwsta(sta);
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 02/10] wifi: rtw89: handle negative rate index for injected frames
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
2026-11-13 23:52 ` [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx() Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-15 3:38 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 03/10] wifi: rtw89: fix RX filter configuration for monitor mode Enver Ikromov
` (8 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
When the radiotap header of an injected frame carries no rate,
info->control.rates[0].idx is -1. rtw89_core_tx_update_injection()
stores the index in a u8, so the value becomes 0xff and is added to
the CCK1/OFDM6 base, programming an invalid hardware rate into the TX
descriptor.
Use a signed index. If it is negative, keep the rate already selected
by rtw89_core_tx_update_mgmt_info() for management frames, and fall
back to data_retry_lowest_rate (or OFDM6 when
IEEE80211_TX_CTL_NO_CCK_RATE is set) for data frames.
Fixes: e96abe4fd7cd ("wifi: rtw89: consider data rate/bandwidth/GI for injected packets")
Cc: stable@vger.kernel.org
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 15 ++++++++++++++-
1 file changed, 14 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index b7df97e..527593e 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -1239,12 +1239,25 @@ static void rtw89_core_tx_update_injection(struct rtw89_dev *rtwdev,
enum mac80211_rate_control_flags flags = info->control.rates[0].flags;
struct rtw89_tx_desc_info *desc_info = &tx_req->desc_info;
const struct rtw89_chan *chan;
- u8 idx = info->control.rates[0].idx;
+ s8 idx = info->control.rates[0].idx;
u8 nss, mcs;
desc_info->use_rate = true;
desc_info->dis_data_fb = true;
+ /* No rate was given in the radiotap header. Management frames
+ * already carry the rate from rtw89_core_tx_update_mgmt_info(), so
+ * only data frames need a fallback.
+ */
+ if (idx < 0) {
+ if (tx_req->tx_type == RTW89_CORE_TX_TYPE_DATA)
+ desc_info->data_rate =
+ info->flags & IEEE80211_TX_CTL_NO_CCK_RATE ?
+ RTW89_HW_RATE_OFDM6 :
+ desc_info->data_retry_lowest_rate;
+ return;
+ }
+
if (flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
desc_info->data_bw = 3;
else if (flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 03/10] wifi: rtw89: fix RX filter configuration for monitor mode
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
2026-11-13 23:52 ` [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx() Enver Ikromov
2026-11-13 23:52 ` [PATCH rtw-next v5 02/10] wifi: rtw89: handle negative rate index for injected frames Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-15 3:48 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 04/10] wifi: rtw89: protect pure_monitor_mode_vif with RCU Enver Ikromov
` (7 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
When entering monitor mode or enabling FIF_OTHER_BSS,
rtw89_ops_configure_filter() updates B_AX_SNIFFER_MODE or clears
B_AX_A_A1_MATCH in hal.rx_fltr, but leaves hardware target-address,
multicast, address CAM, beacon check, and UID drop masks active unless
specific FIF_* flags happen to toggle:
- B_AX_A_UC_CAM_MATCH and B_AX_A_BC_CAM_MATCH are only cleared when
FIF_PROBE_REQ changes, dropping unicast and broadcast frames from
arbitrary BSSs without a CAM entry in hardware.
- B_AX_A_MC is only cleared when FIF_ALLMULTI is set, and
B_AX_A_MC_LIST_CAM_MATCH is never cleared, dropping multicast frames
when a monitor socket is opened without IFF_PROMISC.
- B_AX_UID_FILTER_MASK is initialized in DEFAULT_AX_RX_FLTR and
DEFAULT_BE_RX_FLTR via mac->default_rx_fltr and is never cleared by
any FIF_* flag.
- B_AX_A_A1_MATCH, B_AX_A_BC, and B_AX_A_BCN_CHK_EN must stay cleared
whenever B_AX_SNIFFER_MODE or FIF_OTHER_BSS is active, including
after rtw89_hw_scan_complete_cb(), rtw89_roc_end(), or MAC reinit
writes rtwdev->hal.rx_fltr back to R_AX_RX_FLTR_OPT /
R_BE_RX_FLTR_OPT.
- FIF_CONTROL and FIF_PSPOLL are masked out of *new_flags even though
rx_fltr_init_ax() and rx_fltr_init_be() already forward control
frames to the host via R_AX_CTRL_FLTR / R_BE_CTRL_FLTR.
Retain FIF_CONTROL and FIF_PSPOLL in *new_flags, record FIF_OTHER_BSS
in hal.rx_fltr_other_bss so active monitor interfaces with
MONITOR_FLAG_OTHER_BSS (and concurrent passive monitors) receive
arbitrary-BSS frames without setting B_AX_SNIFFER_MODE, and add
rtw89_mac_refine_rx_fltr() to clear the drop masks without mutating
baseline rtwdev->hal.rx_fltr across mode transitions. The bit positions
in R_AX_RX_FLTR_OPT and R_BE_RX_FLTR_OPT are identical.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.h | 1 +
drivers/net/wireless/realtek/rtw89/mac.c | 3 ++-
drivers/net/wireless/realtek/rtw89/mac.h | 16 ++++++++++++++++
drivers/net/wireless/realtek/rtw89/mac80211.c | 5 ++++-
drivers/net/wireless/realtek/rtw89/mac_be.c | 3 ++-
5 files changed, 25 insertions(+), 3 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 7f84ee5..7be8810 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -6499,6 +6499,7 @@ struct rtw89_hal {
u8 cv;
u8 cid; /* enum rtw89_core_chip_cid */
u8 acv;
+ bool rx_fltr_other_bss;
u16 aid; /* enum rtw89_core_chip_aid */
u32 antenna_tx;
u32 antenna_rx;
diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
index 41796bf..06fb263 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.c
+++ b/drivers/net/wireless/realtek/rtw89/mac.c
@@ -2681,6 +2681,7 @@ void rtw89_mac_set_rx_fltr(struct rtw89_dev *rtwdev, u8 mac_idx, u32 rx_fltr)
u32 reg;
u32 val;
+ rx_fltr = rtw89_mac_refine_rx_fltr(rtwdev, rx_fltr);
reg = rtw89_mac_reg_by_idx(rtwdev, mac->rx_fltr, mac_idx);
val = rtw89_read32(rtwdev, reg);
@@ -2706,7 +2707,7 @@ static int rx_fltr_init_ax(struct rtw89_dev *rtwdev, u8 mac_idx)
if (ret)
return ret;
}
- mac_ftlr = rtwdev->hal.rx_fltr;
+ mac_ftlr = rtw89_mac_refine_rx_fltr(rtwdev, rtwdev->hal.rx_fltr);
plcp_ftlr = B_AX_CCK_CRC_CHK | B_AX_CCK_SIG_CHK |
B_AX_LSIG_PARITY_CHK_EN | B_AX_SIGA_CRC_CHK |
B_AX_VHT_SU_SIGB_CRC_CHK | B_AX_VHT_MU_SIGB_CRC_CHK |
diff --git a/drivers/net/wireless/realtek/rtw89/mac.h b/drivers/net/wireless/realtek/rtw89/mac.h
index db42e33..b4a7cb7 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.h
+++ b/drivers/net/wireless/realtek/rtw89/mac.h
@@ -1494,6 +1494,22 @@ void rtw89_mac_set_edcca_mode_bands(struct rtw89_dev *rtwdev, bool normal)
rtw89_mac_set_edcca_mode(rtwdev, RTW89_MAC_1, normal);
}
+static inline u32 rtw89_mac_refine_rx_fltr(struct rtw89_dev *rtwdev,
+ u32 rx_fltr)
+{
+ if ((rx_fltr & B_AX_SNIFFER_MODE) || rtwdev->hal.rx_fltr_other_bss)
+ rx_fltr &= ~(B_AX_A_A1_MATCH |
+ B_AX_A_BC |
+ B_AX_A_MC |
+ B_AX_A_UC_CAM_MATCH |
+ B_AX_A_BC_CAM_MATCH |
+ B_AX_A_MC_LIST_CAM_MATCH |
+ B_AX_A_BCN_CHK_EN |
+ B_AX_UID_FILTER_MASK);
+
+ return rx_fltr;
+}
+
void rtw89_mac_set_rx_fltr(struct rtw89_dev *rtwdev, u8 mac_idx, u32 rx_fltr);
void rtw89_mac_update_rts_threshold(struct rtw89_dev *rtwdev);
void rtw89_mac_flush_txq(struct rtw89_dev *rtwdev, u32 queues, bool drop);
diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index 5a12639..2a3adf0 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -335,7 +335,10 @@ static void rtw89_ops_configure_filter(struct ieee80211_hw *hw,
rtw89_leave_ps_mode(rtwdev);
*new_flags &= FIF_ALLMULTI | FIF_OTHER_BSS | FIF_FCSFAIL |
- FIF_BCN_PRBRESP_PROMISC | FIF_PROBE_REQ;
+ FIF_BCN_PRBRESP_PROMISC | FIF_PROBE_REQ |
+ FIF_CONTROL | FIF_PSPOLL;
+
+ rtwdev->hal.rx_fltr_other_bss = !!(*new_flags & FIF_OTHER_BSS);
if (changed_flags & FIF_ALLMULTI) {
if (*new_flags & FIF_ALLMULTI)
diff --git a/drivers/net/wireless/realtek/rtw89/mac_be.c b/drivers/net/wireless/realtek/rtw89/mac_be.c
index fa35caf..7147679 100644
--- a/drivers/net/wireless/realtek/rtw89/mac_be.c
+++ b/drivers/net/wireless/realtek/rtw89/mac_be.c
@@ -1328,7 +1328,8 @@ static int rx_fltr_init_be(struct rtw89_dev *rtwdev, u8 mac_idx)
rtw89_mac_typ_fltr_opt_be(rtwdev, RTW89_DATA, RTW89_FWD_TO_HOST, mac_idx);
reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_RX_FLTR_OPT, mac_idx);
- rtw89_write32(rtwdev, reg, rtwdev->hal.rx_fltr);
+ rtw89_write32(rtwdev, reg,
+ rtw89_mac_refine_rx_fltr(rtwdev, rtwdev->hal.rx_fltr));
reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_PLCP_HDR_FLTR, mac_idx);
val = B_BE_HE_SIGB_CRC_CHK | B_BE_VHT_MU_SIGB_CRC_CHK |
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 04/10] wifi: rtw89: protect pure_monitor_mode_vif with RCU
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (2 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 03/10] wifi: rtw89: fix RX filter configuration for monitor mode Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-15 4:00 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 05/10] wifi: rtw89: use AP self role for monitor interfaces Enver Ikromov
` (6 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
A following patch reads rtwdev->pure_monitor_mode_vif from
rtw89_ops_tx(), which runs without the wiphy lock, while interface
add/remove updates the pointer under the wiphy lock.
Annotate pure_monitor_mode_vif with __rcu, convert existing readers to
rcu_access_pointer() and rcu_dereference_protected(), and recompute
the pointer via rtw89_recalc_pure_monitor_vif() and
rtw89_set_pure_monitor_vif().
Whereas mac80211 only creates local->monitor_sdata while no other
interface is open, a monitor interface opened with MONITOR_FLAG_ACTIVE
is passed directly to drv_add_interface() even alongside an active
station or AP interface. Walking rtwdev->rtwvifs_list ensures
pure_monitor_mode_vif is published if and only if a single monitor
interface is the sole active driver vif, and unpublishes it with
synchronize_rcu() before its link, port, and MAC ID are released.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 9 +++-
drivers/net/wireless/realtek/rtw89/core.h | 2 +-
drivers/net/wireless/realtek/rtw89/mac80211.c | 49 +++++++++++++++++--
3 files changed, 53 insertions(+), 7 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 527593e..3447f0e 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -530,7 +530,7 @@ void rtw89_chip_rfk_channel(struct rtw89_dev *rtwdev,
struct rtw89_vif_link *rtwvif_link)
{
const struct rtw89_chip_info *chip = rtwdev->chip;
- bool mon = !!rtwdev->pure_monitor_mode_vif;
+ bool mon = !!rcu_access_pointer(rtwdev->pure_monitor_mode_vif);
bool prehdl_link = false;
if (chip->chip_gen != RTW89_CHIP_AX &&
@@ -560,8 +560,13 @@ void rtw89_chip_rfk_channel(struct rtw89_dev *rtwdev,
static void rtw89_chip_rfk_channel_for_pure_mon_vif(struct rtw89_dev *rtwdev,
enum rtw89_phy_idx phy_idx)
{
- struct rtw89_vif *rtwvif = rtwdev->pure_monitor_mode_vif;
+ struct wiphy *wiphy = rtwdev->hw->wiphy;
struct rtw89_vif_link *rtwvif_link;
+ struct rtw89_vif *rtwvif;
+
+ lockdep_assert_wiphy(wiphy);
+ rtwvif = rcu_dereference_protected(rtwdev->pure_monitor_mode_vif,
+ lockdep_is_held(&wiphy->mtx));
if (!rtwvif)
return;
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 7be8810..78f6ef0 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -7832,7 +7832,7 @@ struct rtw89_dev {
int napi_budget_countdown;
struct rtw89_debugfs *debugfs;
- struct rtw89_vif *pure_monitor_mode_vif;
+ struct rtw89_vif __rcu *pure_monitor_mode_vif;
struct rtw89_led led;
/* HCI related data, keep last */
diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index 2a3adf0..b38e04f 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -183,6 +183,47 @@ static void __rtw89_ops_remove_iface_link(struct rtw89_dev *rtwdev,
rtw89_mac_remove_vif(rtwdev, rtwvif_link);
}
+static bool rtw89_set_pure_monitor_vif(struct rtw89_dev *rtwdev,
+ struct rtw89_vif *rtwvif, bool sync)
+{
+ struct wiphy *wiphy = rtwdev->hw->wiphy;
+ struct rtw89_vif *old;
+
+ lockdep_assert_wiphy(wiphy);
+
+ old = rcu_dereference_protected(rtwdev->pure_monitor_mode_vif,
+ lockdep_is_held(&wiphy->mtx));
+ if (old == rtwvif)
+ return false;
+
+ rcu_assign_pointer(rtwdev->pure_monitor_mode_vif, rtwvif);
+
+ /* wait for lockless readers still using the previous vif */
+ if (old && sync)
+ synchronize_rcu();
+
+ return !!old;
+}
+
+static bool rtw89_recalc_pure_monitor_vif(struct rtw89_dev *rtwdev,
+ struct rtw89_vif *exclude, bool sync)
+{
+ struct rtw89_vif *sole = NULL;
+ struct rtw89_vif *iter;
+
+ rtw89_for_each_rtwvif(rtwdev, iter) {
+ if (iter == exclude)
+ continue;
+ if (sole || rtwvif_to_vif(iter)->type != NL80211_IFTYPE_MONITOR) {
+ sole = NULL;
+ break;
+ }
+ sole = iter;
+ }
+
+ return rtw89_set_pure_monitor_vif(rtwdev, sole, sync);
+}
+
static int rtw89_ops_add_interface(struct ieee80211_hw *hw,
struct ieee80211_vif *vif)
{
@@ -241,8 +282,7 @@ static int rtw89_ops_add_interface(struct ieee80211_hw *hw,
if (ret)
goto unset_link;
- rtwdev->pure_monitor_mode_vif = vif->type == NL80211_IFTYPE_MONITOR ?
- rtwvif : NULL;
+ rtw89_recalc_pure_monitor_vif(rtwdev, NULL, true);
rtw89_recalc_lps(rtwdev);
return 0;
@@ -271,6 +311,9 @@ static void rtw89_ops_remove_interface(struct ieee80211_hw *hw,
rtw89_debug(rtwdev, RTW89_DBG_STATE, "remove vif %pM type %d p2p %d\n",
vif->addr, vif->type, vif->p2p);
+ /* unpublish before tearing down the link, port and MAC ID */
+ rtw89_recalc_pure_monitor_vif(rtwdev, rtwvif, true);
+
wiphy_delayed_work_cancel(hw->wiphy, &rtwvif->roc.roc_work);
rtwvif_link = rtwvif->links[RTW89_VIF_IDLE_LINK_ID];
@@ -290,8 +333,6 @@ static void rtw89_ops_remove_interface(struct ieee80211_hw *hw,
rtw89_core_release_bit_map(rtwdev->hw_port, port);
rtw89_release_mac_id(rtwdev, macid);
- rtwdev->pure_monitor_mode_vif = NULL;
-
rtw89_recalc_lps(rtwdev);
rtw89_enter_ips_by_hwflags(rtwdev);
}
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 05/10] wifi: rtw89: use AP self role for monitor interfaces
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (3 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 04/10] wifi: rtw89: protect pure_monitor_mode_vif with RCU Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-15 4:08 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 06/10] wifi: rtw89: transmit frames from " Enver Ikromov
` (5 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
rtw89_vif_type_mapping() leaves net_type and self_role zero for
NL80211_IFTYPE_MONITOR, i.e. RTW89_NET_TYPE_NO_LINK and
RTW89_SELF_ROLE_CLIENT. When rtw89_mac_add_vif() initializes the
interface, rtw89_mac_vif_init() first creates the role via H2C
ROLE_MAINTAIN and then sends JoinInfo with disassoc set (op == 1) and
this client role.
In firmware (verified on RTL8852AE firmware 0.13.36.2), the JoinInfo
H2C handler treats (self_role != RTW89_SELF_ROLE_AP && op == 1) as a
station disconnect request (HAL8852A_Role_Disconnect), which clears the
newly created role's active bit in the firmware role table and skips
initializing its CMAC control table entry (CCTL_ResetByMacid). Frames
queued on that MAC ID are then silently dropped instead of transmitted.
With self_role set to RTW89_SELF_ROLE_AP and net_type kept at
RTW89_NET_TYPE_NO_LINK, the JoinInfo H2C handler initializes the
MAC ID's CMAC control entry and connects the role without enabling
client TBTT tracking (gated on RTW89_SELF_ROLE_CLIENT) or AP beacon
transmission (gated on RTW89_NET_TYPE_AP_MODE). Set both fields
explicitly for monitor interfaces.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 2 ++
1 file changed, 2 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 3447f0e..9cf2b03 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -5756,6 +5756,8 @@ void rtw89_vif_type_mapping(struct rtw89_vif_link *rtwvif_link, bool assoc)
rtwvif_link->self_role = RTW89_SELF_ROLE_CLIENT;
break;
case NL80211_IFTYPE_MONITOR:
+ rtwvif_link->net_type = RTW89_NET_TYPE_NO_LINK;
+ rtwvif_link->self_role = RTW89_SELF_ROLE_AP;
break;
default:
WARN_ON(1);
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 06/10] wifi: rtw89: transmit frames from monitor interfaces
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (4 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 05/10] wifi: rtw89: use AP self role for monitor interfaces Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-16 1:35 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path Enver Ikromov
` (4 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
Frames injected on a monitor interface reach the driver either through
rtw89_ops_tx() (with info->control.vif == NULL for a passive monitor,
info->control.vif == &sdata->vif for MONITOR_FLAG_ACTIVE, or a running
interface matched by addr2) or, for injected data frames whose addr2
matches an active interface, via wake_tx_queue and
rtw89_core_txq_push().
Passing local->monitor_sdata directly is racy because
ieee80211_del_virtual_monitor() calls drv_remove_interface() before
clearing local->monitor_sdata, so mac80211 may still pass a tearing-down
monitor vif to rtw89_ops_tx() after the driver has released its MAC ID
and port.
In rtw89_ops_tx(), require an active PHY entity and resolve passive
monitor TX through rtwdev->pure_monitor_mode_vif under rcu_read_lock(),
while permitting concurrent MONITOR_FLAG_ACTIVE interfaces to transmit
through their own driver vif while rtwvif->mon_tx_ready is set (clearing
mon_tx_ready and coalescing synchronize_rcu() before teardown). Track
active driver monitor vifs in rtwdev->monitor_vifs via
rtw89_is_monitoring() so concurrent MONITOR_FLAG_ACTIVE interfaces
reserve radiotap headroom and enable PHY status parsing (parsing scan
channel IEs before pushing radiotap headers), and verify skb_headlen()
in rtw89_core_tx_write_link() before reading skb->data.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 22 ++++--
drivers/net/wireless/realtek/rtw89/core.h | 10 ++-
drivers/net/wireless/realtek/rtw89/mac80211.c | 71 ++++++++++++++++---
drivers/net/wireless/realtek/rtw89/phy.c | 2 +-
4 files changed, 88 insertions(+), 17 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 9cf2b03..54605f7 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -1450,6 +1450,14 @@ static int rtw89_core_tx_write_link(struct rtw89_dev *rtwdev,
struct rtw89_core_tx_request tx_req = {};
int ret;
+ if (unlikely(IEEE80211_SKB_CB(skb)->flags & IEEE80211_TX_CTL_INJECTED)) {
+ struct ieee80211_hdr *hdr = (void *)skb->data;
+
+ if (skb_headlen(skb) < sizeof(struct ieee80211_cts) ||
+ skb_headlen(skb) < ieee80211_hdrlen(hdr->frame_control))
+ return -EINVAL;
+ }
+
tx_req.skb = skb;
tx_req.vif = vif;
tx_req.sta = sta;
@@ -2258,7 +2266,7 @@ static int rtw89_core_process_phy_status_ie(struct rtw89_dev *rtwdev,
* scanning that needs to get chan_idx in IE01.
*/
accept = phy_ppdu->to_self || ie == RTW89_PHYSTS_IE01_CMN_OFDM ||
- rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR;
+ rtw89_is_monitoring(rtwdev);
if (!accept)
return 0;
@@ -2341,8 +2349,7 @@ static int rtw89_core_rx_parse_phy_sts(struct rtw89_dev *rtwdev,
u16 ie_len;
/* for normal mode, mark invalid reports and bypass them */
- accept = phy_ppdu->ie >= RTW89_CCK_PKT ||
- rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR;
+ accept = phy_ppdu->ie >= RTW89_CCK_PKT || rtw89_is_monitoring(rtwdev);
if (!accept)
return -EINVAL;
@@ -3231,7 +3238,7 @@ void rtw89_core_update_rx_status_by_ppdu(struct rtw89_dev *rtwdev,
struct ieee80211_rx_status *rx_status,
struct rtw89_rx_phy_ppdu *phy_ppdu)
{
- if (!(rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR))
+ if (!rtw89_is_monitoring(rtwdev))
return;
if (!phy_ppdu)
@@ -3803,7 +3810,7 @@ static void rtw89_core_update_radiotap(struct rtw89_dev *rtwdev,
struct ieee80211_rx_status *rx_status,
struct rtw89_rx_phy_ppdu *phy_ppdu)
{
- if (!(rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR))
+ if (!rtw89_is_monitoring(rtwdev))
return;
/*
@@ -4029,9 +4036,9 @@ static void rtw89_core_rx_to_mac80211(struct rtw89_dev *rtwdev,
rtw89_core_hw_to_sband_rate(rx_status);
rtw89_core_rx_stats(rtwdev, phy_ppdu, desc_info, skb);
rtw89_core_update_rx_status_by_ppdu(rtwdev, rx_status, phy_ppdu);
- rtw89_core_update_radiotap(rtwdev, desc_info, skb, rx_status, phy_ppdu);
rtw89_core_validate_rx_signal(rx_status);
rtw89_core_update_rx_freq_from_ie(rtwdev, skb, rx_status);
+ rtw89_core_update_radiotap(rtwdev, desc_info, skb, rx_status, phy_ppdu);
rtw89_core_correct_mcc_chan(rtwdev, desc_info, rx_status, phy_ppdu);
/* In low power mode, it does RX in thread context. */
@@ -7577,7 +7584,8 @@ static int rtw89_core_register_hw(struct rtw89_dev *rtwdev)
hw->wiphy->num_iftype_ext_capab = ARRAY_SIZE(rtw89_iftypes_ext_capa);
}
- hw->wiphy->features |= NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR;
+ hw->wiphy->features |= NL80211_FEATURE_SCAN_RANDOM_MAC_ADDR |
+ NL80211_FEATURE_ACTIVE_MONITOR;
hw->wiphy->max_scan_ssids = RTW89_SCANOFLD_MAX_SSID;
hw->wiphy->max_scan_ie_len = RTW89_SCANOFLD_MAX_IE_LEN;
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 78f6ef0..7b03154 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -7833,6 +7833,7 @@ struct rtw89_dev {
struct rtw89_debugfs *debugfs;
struct rtw89_vif __rcu *pure_monitor_mode_vif;
+ unsigned int monitor_vifs;
struct rtw89_led led;
/* HCI related data, keep last */
@@ -7870,6 +7871,7 @@ struct rtw89_vif {
struct rtw89_roc roc;
bool offchan;
bool burst_active;
+ bool mon_tx_ready;
enum rtw89_mlo_mode mlo_mode;
struct rtw89_vif_ml_trans ml_trans;
@@ -9323,12 +9325,18 @@ static inline struct rtw89_fw_suit *rtw89_fw_suit_get(struct rtw89_dev *rtwdev,
return &fw_info->normal;
}
+static inline bool rtw89_is_monitoring(struct rtw89_dev *rtwdev)
+{
+ return (rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR) ||
+ READ_ONCE(rtwdev->monitor_vifs);
+}
+
static inline struct sk_buff *rtw89_alloc_skb_for_rx(struct rtw89_dev *rtwdev,
unsigned int length)
{
struct sk_buff *skb;
- if (rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR) {
+ if (rtw89_is_monitoring(rtwdev)) {
skb = dev_alloc_skb(length + RTW89_RADIOTAP_ROOM);
if (!skb)
return NULL;
diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index b38e04f..c8a6003 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -16,6 +16,12 @@
#include "util.h"
#include "wow.h"
+static bool rtw89_has_active_entity(struct rtw89_dev *rtwdev)
+{
+ return rtw89_get_entity_state(rtwdev, RTW89_PHY_0) ||
+ (rtwdev->dbcc_en && rtw89_get_entity_state(rtwdev, RTW89_PHY_1));
+}
+
static void rtw89_ops_tx(struct ieee80211_hw *hw,
struct ieee80211_tx_control *control,
struct sk_buff *skb)
@@ -28,28 +34,56 @@ static void rtw89_ops_tx(struct ieee80211_hw *hw,
struct rtw89_vif *rtwvif;
int ret, qsel;
- if (unlikely(!vif)) {
- ieee80211_free_txskb(hw, skb);
- return;
- }
+ rcu_read_lock();
- rtwvif = vif_to_rtwvif(vif);
+ if (unlikely(!vif || vif->type == NL80211_IFTYPE_MONITOR)) {
+ if (!rtw89_has_active_entity(rtwdev)) {
+ ieee80211_free_txskb(hw, skb);
+ goto out;
+ }
+
+ /* Passive monitors pass vif == NULL and are only permitted to
+ * transmit when a standalone monitor vif is the sole active
+ * interface; active monitors (MONITOR_FLAG_ACTIVE) pass their
+ * own driver vif and may transmit concurrently while
+ * mon_tx_ready is set. Both paths unpublish and wait for an
+ * RCU grace period before releasing link, port, and MAC ID.
+ */
+ rtwvif = rcu_dereference(rtwdev->pure_monitor_mode_vif);
+ if (!rtwvif && vif) {
+ rtwvif = vif_to_rtwvif(vif);
+ if (!READ_ONCE(rtwvif->mon_tx_ready))
+ rtwvif = NULL;
+ }
+ if (!rtwvif) {
+ ieee80211_free_txskb(hw, skb);
+ goto out;
+ }
+
+ vif = rtwvif_to_vif(rtwvif);
+ info->control.vif = vif;
+ } else {
+ rtwvif = vif_to_rtwvif(vif);
+ }
if (rtwvif->offchan && !(flags & IEEE80211_TX_CTL_TX_OFFCHAN) && sta) {
struct rtw89_sta *rtwsta = sta_to_rtwsta(sta);
rtw89_debug(rtwdev, RTW89_DBG_TXRX, "ops_tx during offchan\n");
skb_queue_tail(&rtwsta->roc_queue, skb);
- return;
+ goto out;
}
ret = rtw89_core_tx_write(rtwdev, vif, sta, skb, &qsel);
if (ret) {
rtw89_err(rtwdev, "failed to transmit skb: %d\n", ret);
ieee80211_free_txskb(hw, skb);
- return;
+ goto out;
}
rtw89_core_tx_kick_off(rtwdev, qsel);
+
+out:
+ rcu_read_unlock();
}
static void rtw89_ops_wake_tx_queue(struct ieee80211_hw *hw,
@@ -282,6 +316,13 @@ static int rtw89_ops_add_interface(struct ieee80211_hw *hw,
if (ret)
goto unset_link;
+ if (vif->type == NL80211_IFTYPE_MONITOR) {
+ WRITE_ONCE(rtwvif->mon_tx_ready, true);
+ WRITE_ONCE(rtwdev->monitor_vifs, rtwdev->monitor_vifs + 1);
+ if (rtwdev->monitor_vifs == 1 &&
+ test_bit(RTW89_FLAG_POWERON, rtwdev->flags))
+ rtw89_physts_parsing_init(rtwdev);
+ }
rtw89_recalc_pure_monitor_vif(rtwdev, NULL, true);
rtw89_recalc_lps(rtwdev);
return 0;
@@ -305,6 +346,7 @@ static void rtw89_ops_remove_interface(struct ieee80211_hw *hw,
u8 macid = rtw89_vif_get_main_macid(rtwvif);
u8 port = rtw89_vif_get_main_port(rtwvif);
struct rtw89_vif_link *rtwvif_link;
+ bool need_sync;
lockdep_assert_wiphy(hw->wiphy);
@@ -312,7 +354,13 @@ static void rtw89_ops_remove_interface(struct ieee80211_hw *hw,
vif->addr, vif->type, vif->p2p);
/* unpublish before tearing down the link, port and MAC ID */
- rtw89_recalc_pure_monitor_vif(rtwdev, rtwvif, true);
+ need_sync = rtw89_recalc_pure_monitor_vif(rtwdev, rtwvif, false);
+ if (vif->type == NL80211_IFTYPE_MONITOR && rtwvif->mon_tx_ready) {
+ WRITE_ONCE(rtwvif->mon_tx_ready, false);
+ need_sync = true;
+ }
+ if (need_sync)
+ synchronize_rcu();
wiphy_delayed_work_cancel(hw->wiphy, &rtwvif->roc.roc_work);
@@ -333,6 +381,13 @@ static void rtw89_ops_remove_interface(struct ieee80211_hw *hw,
rtw89_core_release_bit_map(rtwdev->hw_port, port);
rtw89_release_mac_id(rtwdev, macid);
+ if (vif->type == NL80211_IFTYPE_MONITOR && rtwdev->monitor_vifs) {
+ WRITE_ONCE(rtwdev->monitor_vifs, rtwdev->monitor_vifs - 1);
+ if (!rtwdev->monitor_vifs &&
+ test_bit(RTW89_FLAG_POWERON, rtwdev->flags))
+ rtw89_physts_parsing_init(rtwdev);
+ }
+
rtw89_recalc_lps(rtwdev);
rtw89_enter_ips_by_hwflags(rtwdev);
}
diff --git a/drivers/net/wireless/realtek/rtw89/phy.c b/drivers/net/wireless/realtek/rtw89/phy.c
index 795920b..c04fbcf 100644
--- a/drivers/net/wireless/realtek/rtw89/phy.c
+++ b/drivers/net/wireless/realtek/rtw89/phy.c
@@ -7183,7 +7183,7 @@ static void __rtw89_physts_parsing_init(struct rtw89_dev *rtwdev,
u32 val;
u8 i;
- if (rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR) {
+ if (rtw89_is_monitoring(rtwdev)) {
monitor_mode_mu_ies = BIT(RTW89_PHYSTS_IE09_FTR_0);
if (phy->physt_gen < 2)
monitor_mode_mu_ies |= BIT(RTW89_PHYSTS_IE10_FTR_PLCP_EXT);
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (5 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 06/10] wifi: rtw89: transmit frames from " Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-16 2:14 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 08/10] wifi: rtw89: skip host-side TX hooks for injected frames Enver Ikromov
` (3 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
rtw89_core_get_tx_type() classifies every frame that is neither a
management nor a null-data frame as data. Injected control frames
such as a 10-byte ACK or 16-byte RTS therefore go through
rtw89_core_tx_update_data_info(), which derives a TID and data queue
from skb->priority and enables AMPDU/QoS related descriptor fields
that make no sense for them.
Classify injected non-data frames as management frames. Frames
generated by mac80211 itself, such as BlockAckReq, are not affected.
In addition, rtw89_core_tx_update_desc_info() reads hdr->seq_ctrl at
offset 22 for every frame. Control frames have no sequence control
field and are shorter than 24 bytes, so only read hdr->seq_ctrl from
non-control frames whose linear header is long enough to carry it.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 16 ++++++++++++++--
1 file changed, 14 insertions(+), 2 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 54605f7..7003c24 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -637,12 +637,21 @@ static enum rtw89_core_tx_type
rtw89_core_get_tx_type(struct rtw89_dev *rtwdev,
struct sk_buff *skb)
{
+ struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
struct ieee80211_hdr *hdr = (void *)skb->data;
__le16 fc = hdr->frame_control;
if (ieee80211_is_mgmt(fc) || ieee80211_is_any_nullfunc(fc))
return RTW89_CORE_TX_TYPE_MGMT;
+ /* Injected control frames have no QoS/TID and no data payload, so
+ * send them through the management path. Control frames built by
+ * mac80211 itself (e.g. BlockAckReq) keep using the data path.
+ */
+ if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED) &&
+ !ieee80211_is_data(fc))
+ return RTW89_CORE_TX_TYPE_MGMT;
+
return RTW89_CORE_TX_TYPE_DATA;
}
@@ -1299,7 +1308,7 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
enum btc_pkt_type pkt_type;
bool upd_wlan_hdr = false;
bool is_bmc;
- u16 seq;
+ u16 seq = 0;
desc_info->pkt_size = skb->len;
@@ -1315,7 +1324,10 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
else if (tx_req->vif)
desc_info->mlo = ieee80211_vif_is_mld(tx_req->vif);
- seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
+ /* control frames (e.g. 10-byte ACK/CTS) have no sequence control */
+ if (!ieee80211_is_ctl(hdr->frame_control) &&
+ skb_headlen(skb) >= sizeof(struct ieee80211_hdr_3addr))
+ seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
addr_cam = rtw89_get_addr_cam_of(tx_req->rtwvif_link,
tx_req->rtwsta_link);
if (addr_cam->valid && desc_info->mlo)
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 08/10] wifi: rtw89: skip host-side TX hooks for injected frames
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (6 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-16 2:20 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 09/10] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK " Enver Ikromov
` (2 subsequent siblings)
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
Several TX hooks assume frames that were built by the local network
stack for an associated link:
- rtw89_traffic_stats_accu() and rtw89_core_tx_btc_spec_pkt_notify()
inspect ip_hdr()/udp_hdr(). For frames injected on a monitor
interface the network header points into the 802.11 header, so
traffic statistics and BT-coexistence notifications are derived
from unrelated bytes.
- rtw89_wow_parse_akm() records the AKM from (Re)Association Request
frames for WoWLAN, which an injected frame must not change.
- rtw89_core_tx_update_he_qos_htc(), rtw89_core_tx_update_ampdu_info(),
and rtw89_core_txq_check_agg() mutate QoS/HTC headers, enable A-MPDU
aggregation, or start/stop BA sessions based on link state, while
injected frames are expected to be sent as supplied.
Skip these hooks when IEEE80211_TX_CTL_INJECTED is set.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 17 ++++++++++++-----
1 file changed, 12 insertions(+), 5 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 7003c24..84c12c6 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -1351,9 +1351,11 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
break;
case RTW89_CORE_TX_TYPE_DATA:
rtw89_core_tx_update_data_info(rtwdev, tx_req);
- pkt_type = rtw89_core_tx_btc_spec_pkt_notify(rtwdev, tx_req);
- rtw89_core_tx_update_he_qos_htc(rtwdev, tx_req, pkt_type);
- rtw89_core_tx_update_ampdu_info(rtwdev, tx_req, pkt_type);
+ if (likely(!(info->flags & IEEE80211_TX_CTL_INJECTED))) {
+ pkt_type = rtw89_core_tx_btc_spec_pkt_notify(rtwdev, tx_req);
+ rtw89_core_tx_update_he_qos_htc(rtwdev, tx_req, pkt_type);
+ rtw89_core_tx_update_ampdu_info(rtwdev, tx_req, pkt_type);
+ }
rtw89_core_tx_update_llc_hdr(rtwdev, desc_info, skb);
break;
default:
@@ -1477,8 +1479,10 @@ static int rtw89_core_tx_write_link(struct rtw89_dev *rtwdev,
tx_req.rtwsta_link = rtwsta_link;
tx_req.with_wait = !!wait;
- rtw89_traffic_stats_accu(rtwdev, rtwvif, skb, true, true);
- rtw89_wow_parse_akm(rtwdev, skb);
+ if (likely(!(IEEE80211_SKB_CB(skb)->flags & IEEE80211_TX_CTL_INJECTED))) {
+ rtw89_traffic_stats_accu(rtwdev, rtwvif, skb, true, true);
+ rtw89_wow_parse_akm(rtwdev, skb);
+ }
rtw89_core_tx_update_desc_info(rtwdev, &tx_req);
rtw89_core_tx_wake(rtwdev, &tx_req);
@@ -4740,6 +4744,9 @@ static void rtw89_core_txq_check_agg(struct rtw89_dev *rtwdev,
struct ieee80211_sta *sta = txq->sta;
struct rtw89_sta *rtwsta = sta_to_rtwsta_safe(sta);
+ if (unlikely(IEEE80211_SKB_CB(skb)->flags & IEEE80211_TX_CTL_INJECTED))
+ return;
+
if (test_bit(RTW89_TXQ_F_FORBID_BA, rtwtxq->flags))
return;
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 09/10] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK for injected frames
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (7 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 08/10] wifi: rtw89: skip host-side TX hooks for injected frames Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-16 3:00 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 10/10] wifi: rtw89: restore channel when leaving idle on non-chanctx devices Enver Ikromov
2026-11-15 3:12 ` [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Ping-Ke Shih
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
For injected frames, rtw89_core_tx_update_injection() only applies
the radiotap rate and leaves several TX descriptor and completion
settings mismatched with the radiotap flags:
- The management path sets hw_ssn_sel/hw_seq_mode (and MLO links set
upd_wlan_hdr), overwriting user-supplied sequence numbers when
IEEE80211_TX_CTL_ASSIGN_SEQ is not set, and leaving hw_seq_mode
enabled even on injected control frames that have no seq_ctrl field.
Conversely, injected data frames leave hw_seq_mode unset when
ASSIGN_SEQ is requested on a monitor interface.
- Unicast frames unconditionally set RTS_EN = 1 and HW_RTS_EN = 1 in
txwd_info4. On normal traffic HW_RTS_EN = 1 gates RTS on the MAC
length/duration threshold (4080B / 2816us), whereas for injected
frames RTS_EN must follow IEEE80211_TX_RC_USE_RTS_CTS with
HW_RTS_EN = 0 so short frames requesting RTS/CTS actually emit RTS.
- IEEE80211_TX_CTL_NO_ACK (e.g. IEEE80211_RADIOTAP_F_TX_NOACK) neither
sets BE_TXD_BODY6_NO_ACK on Wi-Fi 7 descriptors nor bounds retries,
causing unacknowledged frames to be retransmitted up to the retry
limit. Note that Wi-Fi 6 TXWD v0 chips (RTL8852A/B, RTL8851B) have
no dedicated per-packet NO_ACK descriptor bit and rely on
tx_cnt_lmt = 1 to suppress retransmissions; when that single attempt
completes with RTW89_TX_RETRY_LIMIT, suppress false tx_retry_lmt
accounting in rtw89_pci_tx_status() and set
IEEE80211_TX_STAT_NOACK_TRANSMITTED in rtw89_tx_rpt_tx_status() too.
- hw->max_rate_tries is left at the mac80211 default (4), truncating
IEEE80211_RADIOTAP_DATA_RETRIES, and info->control.rates[0].count is
ignored when a radiotap rate is specified.
- Positive radiotap HT/VHT/legacy rate indices are added to the table
base without clamping to the chip's valid MCS or legacy rate bounds.
Configure hardware sequence assignment according to
IEEE80211_TX_CTL_ASSIGN_SEQ (and never on control frames), drive
rts_en and hw_rts_en for radiotap RTS/CTS, advertise
RTW89_TX_DATA_CNT_LMT_MAX (63) in hw->max_rate_tries, honor
rates[0].count and NO_ACK descriptor/status semantics, and clamp
positive radiotap rate indices to valid hardware ranges.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/core.c | 63 ++++++++++++++++++-----
drivers/net/wireless/realtek/rtw89/core.h | 4 ++
drivers/net/wireless/realtek/rtw89/mac.h | 2 +
drivers/net/wireless/realtek/rtw89/pci.c | 3 +-
4 files changed, 58 insertions(+), 14 deletions(-)
diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
index 84c12c6..7d174d2 100644
--- a/drivers/net/wireless/realtek/rtw89/core.c
+++ b/drivers/net/wireless/realtek/rtw89/core.c
@@ -1252,12 +1252,43 @@ static void rtw89_core_tx_update_injection(struct rtw89_dev *rtwdev,
const struct rtw89_hw_rate_def *hw_rate = &rtw89_hw_rate[rtwdev->chip->chip_gen];
enum mac80211_rate_control_flags flags = info->control.rates[0].flags;
struct rtw89_tx_desc_info *desc_info = &tx_req->desc_info;
+ struct ieee80211_hdr *hdr = (void *)tx_req->skb->data;
const struct rtw89_chan *chan;
s8 idx = info->control.rates[0].idx;
- u8 nss, mcs;
+ u8 nss, mcs, max_mcs;
desc_info->use_rate = true;
desc_info->dis_data_fb = true;
+ desc_info->hw_rts_en = false;
+ desc_info->rts_en = (flags & IEEE80211_TX_RC_USE_RTS_CTS) &&
+ !desc_info->is_bmc &&
+ !(info->flags & IEEE80211_TX_CTL_NO_ACK);
+
+ /* Control frames have no seq_ctrl field; otherwise keep the
+ * sequence number supplied by user space unless ASSIGN_SEQ is set.
+ */
+ if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) ||
+ ieee80211_is_ctl(hdr->frame_control)) {
+ desc_info->upd_wlan_hdr = false;
+ desc_info->hw_ssn_sel = 0;
+ desc_info->hw_seq_mode = 0;
+ } else {
+ desc_info->hw_ssn_sel = RTW89_MGMT_HW_SSN_SEL;
+ desc_info->hw_seq_mode = RTW89_MGMT_HW_SEQ_MODE;
+ }
+
+ /* Suppress hardware retransmissions (and ACK waiting on BE) for NO_ACK;
+ * otherwise honor explicit radiotap retry limits when a rate is set.
+ */
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK) {
+ desc_info->no_ack = true;
+ desc_info->tx_cnt_lmt_en = true;
+ desc_info->tx_cnt_lmt = 1;
+ } else if (info->control.rates[0].count) {
+ desc_info->tx_cnt_lmt_en = true;
+ desc_info->tx_cnt_lmt = umin(info->control.rates[0].count,
+ RTW89_TX_DATA_CNT_LMT_MAX);
+ }
/* No rate was given in the radiotap header. Management frames
* already carry the rate from rtw89_core_tx_update_mgmt_info(), so
@@ -1283,16 +1314,20 @@ static void rtw89_core_tx_update_injection(struct rtw89_dev *rtwdev,
desc_info->gi_ltf = 1;
if (flags & IEEE80211_TX_RC_VHT_MCS) {
+ max_mcs = rtwdev->chip->chip_gen == RTW89_CHIP_BE ? 11 : 9;
nss = umin(idx >> 4, ARRAY_SIZE(hw_rate->vht) - 1);
- mcs = idx & 0xf;
+ mcs = umin(idx & 0xf, max_mcs);
desc_info->data_rate = hw_rate->vht[nss] + mcs;
} else if (flags & IEEE80211_TX_RC_MCS) {
- desc_info->data_rate = hw_rate->ht + idx;
+ desc_info->data_rate = hw_rate->ht + umin(idx, 31);
} else {
chan = rtw89_chan_get(rtwdev, tx_req->rtwvif_link->chanctx_idx);
-
- desc_info->data_rate = idx + (chan->band_type == RTW89_BAND_2G ?
- RTW89_HW_RATE_CCK1 : RTW89_HW_RATE_OFDM6);
+ if (chan->band_type == RTW89_BAND_2G)
+ desc_info->data_rate = RTW89_HW_RATE_CCK1 +
+ umin(idx, 11);
+ else
+ desc_info->data_rate = RTW89_HW_RATE_OFDM6 +
+ umin(idx, 7);
}
}
@@ -1341,6 +1376,8 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
desc_info->seq = seq;
desc_info->is_bmc = is_bmc;
+ desc_info->rts_en = !is_bmc;
+ desc_info->hw_rts_en = true;
desc_info->wd_page = true;
desc_info->hiq = info->flags & IEEE80211_TX_CTL_SEND_AFTER_DTIM;
desc_info->upd_wlan_hdr = upd_wlan_hdr;
@@ -1676,9 +1713,8 @@ static __le32 rtw89_build_txwd_info3(struct rtw89_tx_desc_info *desc_info)
static __le32 rtw89_build_txwd_info4(struct rtw89_tx_desc_info *desc_info)
{
- bool rts_en = !desc_info->is_bmc;
- u32 dword = FIELD_PREP(RTW89_TXWD_INFO4_RTS_EN, rts_en) |
- FIELD_PREP(RTW89_TXWD_INFO4_HW_RTS_EN, 1) |
+ u32 dword = FIELD_PREP(RTW89_TXWD_INFO4_RTS_EN, desc_info->rts_en) |
+ FIELD_PREP(RTW89_TXWD_INFO4_HW_RTS_EN, desc_info->hw_rts_en) |
FIELD_PREP(RTW89_TXWD_INFO4_SW_DEFINE, desc_info->sn);
return cpu_to_le32(dword);
@@ -1819,7 +1855,8 @@ static __le32 rtw89_build_txwd_body5_v2(struct rtw89_tx_desc_info *desc_info)
static __le32 rtw89_build_txwd_body6_v2(struct rtw89_tx_desc_info *desc_info)
{
- u32 dword = FIELD_PREP(BE_TXD_BODY6_UPD_WLAN_HDR, desc_info->upd_wlan_hdr);
+ u32 dword = FIELD_PREP(BE_TXD_BODY6_NO_ACK, desc_info->no_ack) |
+ FIELD_PREP(BE_TXD_BODY6_UPD_WLAN_HDR, desc_info->upd_wlan_hdr);
return cpu_to_le32(dword);
}
@@ -1881,9 +1918,8 @@ static __le32 rtw89_build_txwd_info2_v3(struct rtw89_tx_desc_info *desc_info)
static __le32 rtw89_build_txwd_info4_v2(struct rtw89_tx_desc_info *desc_info)
{
- bool rts_en = !desc_info->is_bmc;
- u32 dword = FIELD_PREP(BE_TXD_INFO4_RTS_EN, rts_en) |
- FIELD_PREP(BE_TXD_INFO4_HW_RTS_EN, 1);
+ u32 dword = FIELD_PREP(BE_TXD_INFO4_RTS_EN, desc_info->rts_en) |
+ FIELD_PREP(BE_TXD_INFO4_HW_RTS_EN, desc_info->hw_rts_en);
return cpu_to_le32(dword);
}
@@ -7542,6 +7578,7 @@ static int rtw89_core_register_hw(struct rtw89_dev *rtwdev)
hw->queues = IEEE80211_NUM_ACS;
hw->max_rx_aggregation_subframes = chip->max_rx_agg_num;
hw->max_tx_aggregation_subframes = chip->max_tx_agg_num;
+ hw->max_rate_tries = RTW89_TX_DATA_CNT_LMT_MAX;
hw->uapsd_max_sp_len = IEEE80211_WMM_IE_STA_QOSINFO_SP_ALL;
hw->radiotap_mcs_details |= IEEE80211_RADIOTAP_MCS_HAVE_FEC |
diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
index 7b03154..3754ab6 100644
--- a/drivers/net/wireless/realtek/rtw89/core.h
+++ b/drivers/net/wireless/realtek/rtw89/core.h
@@ -1278,6 +1278,7 @@ struct rtw89_tx_desc_info {
bool tx_cnt_lmt_en;
u8 sn: 4;
u8 tx_cnt_lmt: 6;
+#define RTW89_TX_DATA_CNT_LMT_MAX 0x3f
u8 addr_info_nr;
u8 sec_keyid;
u8 sec_type;
@@ -1300,6 +1301,9 @@ struct rtw89_tx_desc_info {
bool stbc;
bool ldpc;
bool upd_wlan_hdr;
+ bool no_ack;
+ bool rts_en;
+ bool hw_rts_en;
bool mlo;
bool sw_mld;
};
diff --git a/drivers/net/wireless/realtek/rtw89/mac.h b/drivers/net/wireless/realtek/rtw89/mac.h
index b4a7cb7..6870cc2 100644
--- a/drivers/net/wireless/realtek/rtw89/mac.h
+++ b/drivers/net/wireless/realtek/rtw89/mac.h
@@ -1888,6 +1888,8 @@ void rtw89_tx_rpt_tx_status(struct rtw89_dev *rtwdev, struct sk_buff *skb,
info = IEEE80211_SKB_CB(skb);
ieee80211_tx_info_clear_status(info);
+ if (info->flags & IEEE80211_TX_CTL_NO_ACK)
+ info->flags |= IEEE80211_TX_STAT_NOACK_TRANSMITTED;
if (tx_status == RTW89_TX_DONE)
info->flags |= IEEE80211_TX_STAT_ACK;
else
diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c
index 6d19e75..6c4d6c0 100644
--- a/drivers/net/wireless/realtek/rtw89/pci.c
+++ b/drivers/net/wireless/realtek/rtw89/pci.c
@@ -475,7 +475,8 @@ static void rtw89_pci_tx_status(struct rtw89_dev *rtwdev,
if (tx_status == RTW89_TX_DONE) {
info->flags |= IEEE80211_TX_STAT_ACK;
tx_ring->tx_acked++;
- } else {
+ } else if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) ||
+ tx_status != RTW89_TX_RETRY_LIMIT) {
if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
rtw89_debug(rtwdev, RTW89_DBG_FW,
"failed to TX of status %x\n", tx_status);
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* [PATCH rtw-next v5 10/10] wifi: rtw89: restore channel when leaving idle on non-chanctx devices
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (8 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 09/10] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK " Enver Ikromov
@ 2026-11-13 23:52 ` Enver Ikromov
2026-11-16 3:45 ` Ping-Ke Shih
2026-11-15 3:12 ` [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Ping-Ke Shih
10 siblings, 1 reply; 22+ messages in thread
From: Enver Ikromov @ 2026-11-13 23:52 UTC (permalink / raw)
To: Ping-Ke Shih; +Cc: linux-wireless, linux-kernel, Enver Ikromov
rtw89_alloc_ieee80211_hw() disables native chanctx callbacks
(ops->assign_vif_chanctx = NULL) and relies on mac80211 chanctx
emulation via hw->conf.chandef and rtw89_ops_config() whenever
chip->support_chanctx_num == 0 or the loaded firmware lacks
SCAN_OFFLOAD or BEACON_FILTER (for example on RTL8852AE with firmware
0.13.36.2, where support_chanctx_num == 1 but BEACON_FILTER is absent).
When the last monitor interface is brought down or deleted (or all
interfaces become idle), rtw89_ops_stop() / rtw89_enter_ips() powers
down the MAC/BB/RF and clears the RTW89_PHY_0 entity state while
mac80211 retains local->hw.conf.chandef. When a monitor interface
(including a concurrent MONITOR_FLAG_ACTIVE interface alongside an
unassociated STA, where __ieee80211_recalc_idle() clears
IEEE80211_CONF_IDLE without setting IEEE80211_CONF_MONITOR) is brought
up on the same channel, rtw89_ops_start() sets RTW89_FLAG_POWERON
without programming the channel (so rtw89_leave_ips() returns early),
and ieee80211_hw_conf_chan() omits IEEE80211_CONF_CHANGE_CHANNEL
because chandef is unchanged, leaving RX/TX silent until a manual
channel change.
In rtw89_ops_config(), when IEEE80211_CONF_CHANGE_IDLE or
IEEE80211_CONF_CHANGE_MONITOR leaves the device non-idle on hardware
without assign_vif_chanctx and RTW89_PHY_0 is not yet active, apply
hw->conf.chandef and call rtw89_set_channel(). When
IEEE80211_CONF_CHANGE_CHANNEL has already configured RTW89_PHY_0, the
entity state check avoids redundant RF calibration.
Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
---
drivers/net/wireless/realtek/rtw89/mac80211.c | 11 +++++++++++
1 file changed, 11 insertions(+)
diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c b/drivers/net/wireless/realtek/rtw89/mac80211.c
index c8a6003..3649a7a 100644
--- a/drivers/net/wireless/realtek/rtw89/mac80211.c
+++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
@@ -152,6 +152,17 @@ static int rtw89_ops_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
if (changed & IEEE80211_CONF_CHANGE_MONITOR)
rtw89_physts_parsing_init(rtwdev);
+ if ((changed & (IEEE80211_CONF_CHANGE_IDLE |
+ IEEE80211_CONF_CHANGE_MONITOR)) &&
+ !(hw->conf.flags & IEEE80211_CONF_IDLE) &&
+ !rtwdev->ops->assign_vif_chanctx &&
+ !rtw89_get_entity_state(rtwdev, RTW89_PHY_0) &&
+ cfg80211_chandef_valid(&hw->conf.chandef)) {
+ rtw89_config_entity_chandef(rtwdev, RTW89_CHANCTX_0,
+ &hw->conf.chandef);
+ rtw89_set_channel(rtwdev);
+ }
+
return 0;
}
--
2.56.0.windows.4
^ permalink raw reply related [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
` (9 preceding siblings ...)
2026-11-13 23:52 ` [PATCH rtw-next v5 10/10] wifi: rtw89: restore channel when leaving idle on non-chanctx devices Enver Ikromov
@ 2026-11-15 3:12 ` Ping-Ke Shih
10 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-15 3:12 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> v4: not sent to the list
What's wrong?
At first glance, I saw v5. I was confused, because I don't remember I have
seen v4. Please not count your local version.
> v3: https://lore.kernel.org/linux-wireless/20261104203051.564-1-owner@ph4ntom-rev.uz/
> v2: https://lore.kernel.org/linux-wireless/179371849554.20972.16232816164394690660@ph4ntom-rev.uz/
> v1 (RFC):
> https://lore.kernel.org/linux-wireless/1a196d6dfbc.35537d221913104450.3720060455831933789@zoho.com
> /
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx()
2026-11-13 23:52 ` [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx() Enver Ikromov
@ 2026-11-15 3:23 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-15 3:23 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> rtw89 sets IEEE80211_HW_WANT_MONITOR_VIF but not
> IEEE80211_HW_QUEUE_CONTROL.
Will this cause vif = NULL? What is their relation?
> For frames transmitted on a monitor
> interface, ieee80211_tx_frags() therefore passes
> info->control.vif == NULL to the driver whenever local->monitor_sdata
> does not exist, e.g. when a raw frame is sent on a monitor interface
> while a station interface is also up and the frame's addr2 does not
> match any running interface.
>
> rtw89_ops_tx() unconditionally converts the vif with vif_to_rtwvif()
> and dereferences rtwvif->offchan, so such a frame makes the kernel
> access memory at a small offset from NULL.
>
> Drop frames without a vif, as there is no MAC ID or port they could
> be transmitted on.
>
> Fixes: a0e97ae3f332 ("wifi: rtw89: add ieee80211::remain_on_channel ops")
> Cc: stable@vger.kernel.org
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/mac80211.c | 9 ++++++++-
> 1 file changed, 8 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c
> b/drivers/net/wireless/realtek/rtw89/mac80211.c
> index 9134cdc..5a12639 100644
> --- a/drivers/net/wireless/realtek/rtw89/mac80211.c
> +++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
> @@ -23,11 +23,18 @@ static void rtw89_ops_tx(struct ieee80211_hw *hw,
> struct rtw89_dev *rtwdev = hw->priv;
> struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> struct ieee80211_vif *vif = info->control.vif;
> - struct rtw89_vif *rtwvif = vif_to_rtwvif(vif);
Use vif_to_rtwvif_safe().
> struct ieee80211_sta *sta = control->sta;
> u32 flags = IEEE80211_SKB_CB(skb)->flags;
> + struct rtw89_vif *rtwvif;
> int ret, qsel;
>
> + if (unlikely(!vif)) {
> + ieee80211_free_txskb(hw, skb);
> + return;
> + }
> +
> + rtwvif = vif_to_rtwvif(vif);
> +
> if (rtwvif->offchan && !(flags & IEEE80211_TX_CTL_TX_OFFCHAN) && sta) {
> struct rtw89_sta *rtwsta = sta_to_rtwsta(sta);
>
> --
> 2.56.0.windows.4
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 02/10] wifi: rtw89: handle negative rate index for injected frames
2026-11-13 23:52 ` [PATCH rtw-next v5 02/10] wifi: rtw89: handle negative rate index for injected frames Enver Ikromov
@ 2026-11-15 3:38 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-15 3:38 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> When the radiotap header of an injected frame carries no rate,
> info->control.rates[0].idx is -1.
> rtw89_core_tx_update_injection()
> stores the index in a u8, so the value becomes 0xff and is added to
> the CCK1/OFDM6 base, programming an invalid hardware rate into the TX
> descriptor.
I don't prefer to describe function name in commit message. Just
describe the problem you encountered and how to fix it.
For this patch, you want to handle the rate idx < 0 case, and solution
is set rate to 1M and 6M for 2GHz band and others respectively, right?
I guess LLM help to generate this. Code flow is not important to
commit message. The patch should explain the flow itself.
>
> Use a signed index. If it is negative, keep the rate already selected
> by rtw89_core_tx_update_mgmt_info() for management frames, and fall
> back to data_retry_lowest_rate (or OFDM6 when
> IEEE80211_TX_CTL_NO_CCK_RATE is set) for data frames.
>
> Fixes: e96abe4fd7cd ("wifi: rtw89: consider data rate/bandwidth/GI for injected packets")
> Cc: stable@vger.kernel.org
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/core.c | 15 ++++++++++++++-
> 1 file changed, 14 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
> index b7df97e..527593e 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.c
> +++ b/drivers/net/wireless/realtek/rtw89/core.c
> @@ -1239,12 +1239,25 @@ static void rtw89_core_tx_update_injection(struct rtw89_dev *rtwdev,
> enum mac80211_rate_control_flags flags = info->control.rates[0].flags;
> struct rtw89_tx_desc_info *desc_info = &tx_req->desc_info;
> const struct rtw89_chan *chan;
> - u8 idx = info->control.rates[0].idx;
> + s8 idx = info->control.rates[0].idx;
> u8 nss, mcs;
>
> desc_info->use_rate = true;
> desc_info->dis_data_fb = true;
>
> + /* No rate was given in the radiotap header. Management frames
> + * already carry the rate from rtw89_core_tx_update_mgmt_info(), so
> + * only data frames need a fallback.
> + */
> + if (idx < 0) {
> + if (tx_req->tx_type == RTW89_CORE_TX_TYPE_DATA)
> + desc_info->data_rate =
> + info->flags & IEEE80211_TX_CTL_NO_CCK_RATE ?
> + RTW89_HW_RATE_OFDM6 :
> + desc_info->data_retry_lowest_rate;
> + return;
> + }
> +
How about just set idx = 0 if idx < 0? The existing code can select valid rate,
since any rate is well for the case idx < 0.
> if (flags & IEEE80211_TX_RC_160_MHZ_WIDTH)
> desc_info->data_bw = 3;
> else if (flags & IEEE80211_TX_RC_80_MHZ_WIDTH)
> --
> 2.56.0.windows.4
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 03/10] wifi: rtw89: fix RX filter configuration for monitor mode
2026-11-13 23:52 ` [PATCH rtw-next v5 03/10] wifi: rtw89: fix RX filter configuration for monitor mode Enver Ikromov
@ 2026-11-15 3:48 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-15 3:48 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> When entering monitor mode or enabling FIF_OTHER_BSS,
> rtw89_ops_configure_filter() updates B_AX_SNIFFER_MODE or clears
> B_AX_A_A1_MATCH in hal.rx_fltr, but leaves hardware target-address,
> multicast, address CAM, beacon check, and UID drop masks active unless
> specific FIF_* flags happen to toggle:
Please describe your purpose. For example, describe which kind of
packets you want to capture, but current settings misbehavior. Then,
I can ask internally to know if you patch is necessary or not.
>
> - B_AX_A_UC_CAM_MATCH and B_AX_A_BC_CAM_MATCH are only cleared when
> FIF_PROBE_REQ changes, dropping unicast and broadcast frames from
> arbitrary BSSs without a CAM entry in hardware.
> - B_AX_A_MC is only cleared when FIF_ALLMULTI is set, and
> B_AX_A_MC_LIST_CAM_MATCH is never cleared, dropping multicast frames
> when a monitor socket is opened without IFF_PROMISC.
> - B_AX_UID_FILTER_MASK is initialized in DEFAULT_AX_RX_FLTR and
> DEFAULT_BE_RX_FLTR via mac->default_rx_fltr and is never cleared by
> any FIF_* flag.
> - B_AX_A_A1_MATCH, B_AX_A_BC, and B_AX_A_BCN_CHK_EN must stay cleared
> whenever B_AX_SNIFFER_MODE or FIF_OTHER_BSS is active, including
> after rtw89_hw_scan_complete_cb(), rtw89_roc_end(), or MAC reinit
> writes rtwdev->hal.rx_fltr back to R_AX_RX_FLTR_OPT /
> R_BE_RX_FLTR_OPT.
> - FIF_CONTROL and FIF_PSPOLL are masked out of *new_flags even though
> rx_fltr_init_ax() and rx_fltr_init_be() already forward control
> frames to the host via R_AX_CTRL_FLTR / R_BE_CTRL_FLTR.
>
> Retain FIF_CONTROL and FIF_PSPOLL in *new_flags, record FIF_OTHER_BSS
> in hal.rx_fltr_other_bss so active monitor interfaces with
> MONITOR_FLAG_OTHER_BSS (and concurrent passive monitors) receive
> arbitrary-BSS frames without setting B_AX_SNIFFER_MODE, and add
> rtw89_mac_refine_rx_fltr() to clear the drop masks without mutating
> baseline rtwdev->hal.rx_fltr across mode transitions. The bit positions
> in R_AX_RX_FLTR_OPT and R_BE_RX_FLTR_OPT are identical.
Can you reword commit message generated by LLM? Just point the key
point. Reading lots of stuff spends my time.
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/core.h | 1 +
> drivers/net/wireless/realtek/rtw89/mac.c | 3 ++-
> drivers/net/wireless/realtek/rtw89/mac.h | 16 ++++++++++++++++
> drivers/net/wireless/realtek/rtw89/mac80211.c | 5 ++++-
> drivers/net/wireless/realtek/rtw89/mac_be.c | 3 ++-
> 5 files changed, 25 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.h b/drivers/net/wireless/realtek/rtw89/core.h
> index 7f84ee5..7be8810 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.h
> +++ b/drivers/net/wireless/realtek/rtw89/core.h
> @@ -6499,6 +6499,7 @@ struct rtw89_hal {
> u8 cv;
> u8 cid; /* enum rtw89_core_chip_cid */
> u8 acv;
> + bool rx_fltr_other_bss;
> u16 aid; /* enum rtw89_core_chip_aid */
> u32 antenna_tx;
> u32 antenna_rx;
> diff --git a/drivers/net/wireless/realtek/rtw89/mac.c b/drivers/net/wireless/realtek/rtw89/mac.c
> index 41796bf..06fb263 100644
> --- a/drivers/net/wireless/realtek/rtw89/mac.c
> +++ b/drivers/net/wireless/realtek/rtw89/mac.c
> @@ -2681,6 +2681,7 @@ void rtw89_mac_set_rx_fltr(struct rtw89_dev *rtwdev, u8 mac_idx, u32 rx_fltr)
> u32 reg;
> u32 val;
>
> + rx_fltr = rtw89_mac_refine_rx_fltr(rtwdev, rx_fltr);
> reg = rtw89_mac_reg_by_idx(rtwdev, mac->rx_fltr, mac_idx);
>
> val = rtw89_read32(rtwdev, reg);
> @@ -2706,7 +2707,7 @@ static int rx_fltr_init_ax(struct rtw89_dev *rtwdev, u8 mac_idx)
> if (ret)
> return ret;
> }
> - mac_ftlr = rtwdev->hal.rx_fltr;
> + mac_ftlr = rtw89_mac_refine_rx_fltr(rtwdev, rtwdev->hal.rx_fltr);
> plcp_ftlr = B_AX_CCK_CRC_CHK | B_AX_CCK_SIG_CHK |
> B_AX_LSIG_PARITY_CHK_EN | B_AX_SIGA_CRC_CHK |
> B_AX_VHT_SU_SIGB_CRC_CHK | B_AX_VHT_MU_SIGB_CRC_CHK |
> diff --git a/drivers/net/wireless/realtek/rtw89/mac.h b/drivers/net/wireless/realtek/rtw89/mac.h
> index db42e33..b4a7cb7 100644
> --- a/drivers/net/wireless/realtek/rtw89/mac.h
> +++ b/drivers/net/wireless/realtek/rtw89/mac.h
> @@ -1494,6 +1494,22 @@ void rtw89_mac_set_edcca_mode_bands(struct rtw89_dev *rtwdev, bool normal)
> rtw89_mac_set_edcca_mode(rtwdev, RTW89_MAC_1, normal);
> }
>
> +static inline u32 rtw89_mac_refine_rx_fltr(struct rtw89_dev *rtwdev,
> + u32 rx_fltr)
> +{
> + if ((rx_fltr & B_AX_SNIFFER_MODE) || rtwdev->hal.rx_fltr_other_bss)
Can we just do additional in rtw89_ops_configure_filter() under the
condition
rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR
?
> + rx_fltr &= ~(B_AX_A_A1_MATCH |
> + B_AX_A_BC |
> + B_AX_A_MC |
> + B_AX_A_UC_CAM_MATCH |
> + B_AX_A_BC_CAM_MATCH |
> + B_AX_A_MC_LIST_CAM_MATCH |
> + B_AX_A_BCN_CHK_EN |
> + B_AX_UID_FILTER_MASK);
> +
> + return rx_fltr;
> +}
> +
> void rtw89_mac_set_rx_fltr(struct rtw89_dev *rtwdev, u8 mac_idx, u32 rx_fltr);
> void rtw89_mac_update_rts_threshold(struct rtw89_dev *rtwdev);
> void rtw89_mac_flush_txq(struct rtw89_dev *rtwdev, u32 queues, bool drop);
> diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c
> b/drivers/net/wireless/realtek/rtw89/mac80211.c
> index 5a12639..2a3adf0 100644
> --- a/drivers/net/wireless/realtek/rtw89/mac80211.c
> +++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
> @@ -335,7 +335,10 @@ static void rtw89_ops_configure_filter(struct ieee80211_hw *hw,
> rtw89_leave_ps_mode(rtwdev);
>
> *new_flags &= FIF_ALLMULTI | FIF_OTHER_BSS | FIF_FCSFAIL |
> - FIF_BCN_PRBRESP_PROMISC | FIF_PROBE_REQ;
> + FIF_BCN_PRBRESP_PROMISC | FIF_PROBE_REQ |
> + FIF_CONTROL | FIF_PSPOLL;
> +
> + rtwdev->hal.rx_fltr_other_bss = !!(*new_flags & FIF_OTHER_BSS);
>
> if (changed_flags & FIF_ALLMULTI) {
> if (*new_flags & FIF_ALLMULTI)
> diff --git a/drivers/net/wireless/realtek/rtw89/mac_be.c
> b/drivers/net/wireless/realtek/rtw89/mac_be.c
> index fa35caf..7147679 100644
> --- a/drivers/net/wireless/realtek/rtw89/mac_be.c
> +++ b/drivers/net/wireless/realtek/rtw89/mac_be.c
> @@ -1328,7 +1328,8 @@ static int rx_fltr_init_be(struct rtw89_dev *rtwdev, u8 mac_idx)
> rtw89_mac_typ_fltr_opt_be(rtwdev, RTW89_DATA, RTW89_FWD_TO_HOST, mac_idx);
>
> reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_RX_FLTR_OPT, mac_idx);
> - rtw89_write32(rtwdev, reg, rtwdev->hal.rx_fltr);
> + rtw89_write32(rtwdev, reg,
> + rtw89_mac_refine_rx_fltr(rtwdev, rtwdev->hal.rx_fltr));
This is just initial state. I suppose rtw89_ops_configure_filter() can change
to proper setting by *new_flags passed from mac80211.
>
> reg = rtw89_mac_reg_by_idx(rtwdev, R_BE_PLCP_HDR_FLTR, mac_idx);
> val = B_BE_HE_SIGB_CRC_CHK | B_BE_VHT_MU_SIGB_CRC_CHK |
> --
> 2.56.0.windows.4
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 04/10] wifi: rtw89: protect pure_monitor_mode_vif with RCU
2026-11-13 23:52 ` [PATCH rtw-next v5 04/10] wifi: rtw89: protect pure_monitor_mode_vif with RCU Enver Ikromov
@ 2026-11-15 4:00 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-15 4:00 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> A following patch reads rtwdev->pure_monitor_mode_vif from
> rtw89_ops_tx(), which runs without the wiphy lock, while interface
> add/remove updates the pointer under the wiphy lock.
Did you actually have rtwdev->pure_monitor_mode_vif for the case
vif == NULL?
For wlan0 + mon0 concurrency, there is no monitor vif, no?
>
> Annotate pure_monitor_mode_vif with __rcu, convert existing readers to
> rcu_access_pointer() and rcu_dereference_protected(), and recompute
> the pointer via rtw89_recalc_pure_monitor_vif() and
> rtw89_set_pure_monitor_vif().
>
> Whereas mac80211 only creates local->monitor_sdata while no other
> interface is open, a monitor interface opened with MONITOR_FLAG_ACTIVE
> is passed directly to drv_add_interface() even alongside an active
> station or AP interface. Walking rtwdev->rtwvifs_list ensures
> pure_monitor_mode_vif is published if and only if a single monitor
> interface is the sole active driver vif, and unpublishes it with
> synchronize_rcu() before its link, port, and MAC ID are released.
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
[..]
> @@ -241,8 +282,7 @@ static int rtw89_ops_add_interface(struct ieee80211_hw *hw,
> if (ret)
> goto unset_link;
>
> - rtwdev->pure_monitor_mode_vif = vif->type == NL80211_IFTYPE_MONITOR ?
> - rtwvif : NULL;
> + rtw89_recalc_pure_monitor_vif(rtwdev, NULL, true);
I don't see the difference from this change. For virtual monitor mode, there
is one monitor vif at most.
> rtw89_recalc_lps(rtwdev);
> return 0;
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 05/10] wifi: rtw89: use AP self role for monitor interfaces
2026-11-13 23:52 ` [PATCH rtw-next v5 05/10] wifi: rtw89: use AP self role for monitor interfaces Enver Ikromov
@ 2026-11-15 4:08 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-15 4:08 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> rtw89_vif_type_mapping() leaves net_type and self_role zero for
> NL80211_IFTYPE_MONITOR, i.e. RTW89_NET_TYPE_NO_LINK and
> RTW89_SELF_ROLE_CLIENT. When rtw89_mac_add_vif() initializes the
> interface, rtw89_mac_vif_init() first creates the role via H2C
> ROLE_MAINTAIN and then sends JoinInfo with disassoc set (op == 1) and
> this client role.
Describe why you need this patch. Which problem you encountered and
wanted to fix.
>
> In firmware (verified on RTL8852AE firmware 0.13.36.2), the JoinInfo
> H2C handler treats (self_role != RTW89_SELF_ROLE_AP && op == 1) as a
> station disconnect request (HAL8852A_Role_Disconnect), which clears the
> newly created role's active bit in the firmware role table and skips
> initializing its CMAC control table entry (CCTL_ResetByMacid). Frames
> queued on that MAC ID are then silently dropped instead of transmitted.
>
> With self_role set to RTW89_SELF_ROLE_AP and net_type kept at
> RTW89_NET_TYPE_NO_LINK, the JoinInfo H2C handler initializes the
> MAC ID's CMAC control entry and connects the role without enabling
> client TBTT tracking (gated on RTW89_SELF_ROLE_CLIENT) or AP beacon
> transmission (gated on RTW89_NET_TYPE_AP_MODE). Set both fields
> explicitly for monitor interfaces.
I'll check firmware people the setting.
(I will review remaining patches tomorrow.)
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/core.c | 2 ++
> 1 file changed, 2 insertions(+)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
> index 3447f0e..9cf2b03 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.c
> +++ b/drivers/net/wireless/realtek/rtw89/core.c
> @@ -5756,6 +5756,8 @@ void rtw89_vif_type_mapping(struct rtw89_vif_link *rtwvif_link, bool assoc)
> rtwvif_link->self_role = RTW89_SELF_ROLE_CLIENT;
> break;
> case NL80211_IFTYPE_MONITOR:
> + rtwvif_link->net_type = RTW89_NET_TYPE_NO_LINK;
> + rtwvif_link->self_role = RTW89_SELF_ROLE_AP;
> break;
> default:
> WARN_ON(1);
> --
> 2.56.0.windows.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 06/10] wifi: rtw89: transmit frames from monitor interfaces
2026-11-13 23:52 ` [PATCH rtw-next v5 06/10] wifi: rtw89: transmit frames from " Enver Ikromov
@ 2026-11-16 1:35 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-16 1:35 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> Frames injected on a monitor interface reach the driver either through
> rtw89_ops_tx() (with info->control.vif == NULL for a passive monitor,
> info->control.vif == &sdata->vif for MONITOR_FLAG_ACTIVE, or a running
> interface matched by addr2) or,
What do you want to do in this patch? Flag MONITOR_FLAG_ACTIVE, so rtw89
can handle the ACKs?
> for injected data frames whose addr2
> matches an active interface, via wake_tx_queue and
> rtw89_core_txq_push().
How can I reproduce this? I setup wlan0 + mon0 (with UP state), and
use your script to inject packet with wlan0's mac address, it still
goes via rtw89_ops_tx().
>
> Passing local->monitor_sdata directly is racy because
> ieee80211_del_virtual_monitor() calls drv_remove_interface() before
> clearing local->monitor_sdata, so mac80211 may still pass a tearing-down
> monitor vif to rtw89_ops_tx() after the driver has released its MAC ID
> and port.
The local->monitor_sdata is RCU data, and ieee80211_monitor_start_xmit()
holds rcu_read_lock(). Is it a problematic?
>
> In rtw89_ops_tx(), require an active PHY entity and resolve passive
> monitor TX through rtwdev->pure_monitor_mode_vif under rcu_read_lock(),
> while permitting concurrent MONITOR_FLAG_ACTIVE interfaces to transmit
> through their own driver vif while rtwvif->mon_tx_ready is set (clearing
> mon_tx_ready and coalescing synchronize_rcu() before teardown). Track
> active driver monitor vifs in rtwdev->monitor_vifs via
> rtw89_is_monitoring() so concurrent MONITOR_FLAG_ACTIVE interfaces
> reserve radiotap headroom and enable PHY status parsing (parsing scan
> channel IEs before pushing radiotap headers), and verify skb_headlen()
> in rtw89_core_tx_write_link() before reading skb->data.
I don't think rtwdev->monitor_vifs can be more than one. How could it
be?
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/core.c | 22 ++++--
> drivers/net/wireless/realtek/rtw89/core.h | 10 ++-
> drivers/net/wireless/realtek/rtw89/mac80211.c | 71 ++++++++++++++++---
> drivers/net/wireless/realtek/rtw89/phy.c | 2 +-
> 4 files changed, 88 insertions(+), 17 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
> index 9cf2b03..54605f7 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.c
> +++ b/drivers/net/wireless/realtek/rtw89/core.c
> @@ -1450,6 +1450,14 @@ static int rtw89_core_tx_write_link(struct rtw89_dev *rtwdev,
> struct rtw89_core_tx_request tx_req = {};
> int ret;
>
> + if (unlikely(IEEE80211_SKB_CB(skb)->flags & IEEE80211_TX_CTL_INJECTED)) {
> + struct ieee80211_hdr *hdr = (void *)skb->data;
> +
> + if (skb_headlen(skb) < sizeof(struct ieee80211_cts) ||
> + skb_headlen(skb) < ieee80211_hdrlen(hdr->frame_control))
> + return -EINVAL;
> + }
> +
If validation is necessary, should you validate more? not only CTS?
Also, create a function to do this. I feel only rtw89_ops_tx() can be entry of
injection, please do validation there.
> tx_req.skb = skb;
> tx_req.vif = vif;
> tx_req.sta = sta;
[...]
> @@ -9323,12 +9325,18 @@ static inline struct rtw89_fw_suit *rtw89_fw_suit_get(struct rtw89_dev *rtwdev,
> return &fw_info->normal;
> }
>
> +static inline bool rtw89_is_monitoring(struct rtw89_dev *rtwdev)
> +{
> + return (rtwdev->hw->conf.flags & IEEE80211_CONF_MONITOR) ||
> + READ_ONCE(rtwdev->monitor_vifs);
The monitor_vifs > 1 is not possible, why do you need this?
The flag IEEE80211_CONF_MONITOR is cleared if both wlan0 + mon0 are UP.
Do you actually need that? I have no good idea now. Can we just focus
on single monitor case? Or just avoid crash from concurrency
combination.
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path
2026-11-13 23:52 ` [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path Enver Ikromov
@ 2026-11-16 2:14 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-16 2:14 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> rtw89_core_get_tx_type() classifies every frame that is neither a
> management nor a null-data frame as data. Injected control frames
> such as a 10-byte ACK or 16-byte RTS therefore go through
> rtw89_core_tx_update_data_info(), which derives a TID and data queue
> from skb->priority and enables AMPDU/QoS related descriptor fields
> that make no sense for them.
Original design is only to send urgent packets via MGMT queue, and
I think no control frame sent vi driver. Instead, firmware/hardware
will sent them.
Did you encounter real problem if CTS/RST goes via AC queue?
I just don't want much conditions in data path.
>
> Classify injected non-data frames as management frames. Frames
> generated by mac80211 itself, such as BlockAckReq, are not affected.
Did you actually see driver sends control frames generated by mac80211?
If so, when and how?
>
> In addition, rtw89_core_tx_update_desc_info() reads hdr->seq_ctrl at
> offset 22 for every frame. Control frames have no sequence control
> field and are shorter than 24 bytes, so only read hdr->seq_ctrl from
> non-control frames whose linear header is long enough to carry it.
I think all control frames have no sequence control, just fill seq=0
for them?
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/core.c | 16 ++++++++++++++--
> 1 file changed, 14 insertions(+), 2 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
> index 54605f7..7003c24 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.c
> +++ b/drivers/net/wireless/realtek/rtw89/core.c
> @@ -637,12 +637,21 @@ static enum rtw89_core_tx_type
> rtw89_core_get_tx_type(struct rtw89_dev *rtwdev,
> struct sk_buff *skb)
> {
> + struct ieee80211_tx_info *info = IEEE80211_SKB_CB(skb);
> struct ieee80211_hdr *hdr = (void *)skb->data;
> __le16 fc = hdr->frame_control;
>
> if (ieee80211_is_mgmt(fc) || ieee80211_is_any_nullfunc(fc))
> return RTW89_CORE_TX_TYPE_MGMT;
>
> + /* Injected control frames have no QoS/TID and no data payload, so
> + * send them through the management path. Control frames built by
> + * mac80211 itself (e.g. BlockAckReq) keep using the data path.
> + */
The code self-explain it is injection, no need comment.
But I still wonder this is required? Any problem without this?
> + if (unlikely(info->flags & IEEE80211_TX_CTL_INJECTED) &&
> + !ieee80211_is_data(fc))
> + return RTW89_CORE_TX_TYPE_MGMT;
> +
> return RTW89_CORE_TX_TYPE_DATA;
> }
>
> @@ -1299,7 +1308,7 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
> enum btc_pkt_type pkt_type;
> bool upd_wlan_hdr = false;
> bool is_bmc;
> - u16 seq;
> + u16 seq = 0;
>
> desc_info->pkt_size = skb->len;
>
> @@ -1315,7 +1324,10 @@ rtw89_core_tx_update_desc_info(struct rtw89_dev *rtwdev,
> else if (tx_req->vif)
> desc_info->mlo = ieee80211_vif_is_mld(tx_req->vif);
>
> - seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
> + /* control frames (e.g. 10-byte ACK/CTS) have no sequence control */
> + if (!ieee80211_is_ctl(hdr->frame_control) &&
> + skb_headlen(skb) >= sizeof(struct ieee80211_hdr_3addr))
> + seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
If my thought is correct, here can just
if (ieee80211_is_ctl(hdr->frame_control))
seq = 0;
else
seq = (le16_to_cpu(hdr->seq_ctrl) & IEEE80211_SCTL_SEQ) >> 4;
> addr_cam = rtw89_get_addr_cam_of(tx_req->rtwvif_link,
> tx_req->rtwsta_link);
> if (addr_cam->valid && desc_info->mlo)
> --
> 2.56.0.windows.4
>
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 08/10] wifi: rtw89: skip host-side TX hooks for injected frames
2026-11-13 23:52 ` [PATCH rtw-next v5 08/10] wifi: rtw89: skip host-side TX hooks for injected frames Enver Ikromov
@ 2026-11-16 2:20 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-16 2:20 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> Several TX hooks assume frames that were built by the local network
> stack for an associated link:
>
> - rtw89_traffic_stats_accu() and rtw89_core_tx_btc_spec_pkt_notify()
> inspect ip_hdr()/udp_hdr(). For frames injected on a monitor
> interface the network header points into the 802.11 header, so
> traffic statistics and BT-coexistence notifications are derived
> from unrelated bytes.
> - rtw89_wow_parse_akm() records the AKM from (Re)Association Request
> frames for WoWLAN, which an injected frame must not change.
> - rtw89_core_tx_update_he_qos_htc(), rtw89_core_tx_update_ampdu_info(),
> and rtw89_core_txq_check_agg() mutate QoS/HTC headers, enable A-MPDU
> aggregation, or start/stop BA sessions based on link state, while
> injected frames are expected to be sent as supplied.
If these are harmless to inject in single one monitor interface.
I prefer not applying these changes.
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 09/10] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK for injected frames
2026-11-13 23:52 ` [PATCH rtw-next v5 09/10] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK " Enver Ikromov
@ 2026-11-16 3:00 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-16 3:00 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> For injected frames, rtw89_core_tx_update_injection() only applies
> the radiotap rate and leaves several TX descriptor and completion
> settings mismatched with the radiotap flags:
>
> - The management path sets hw_ssn_sel/hw_seq_mode (and MLO links set
> upd_wlan_hdr), overwriting user-supplied sequence numbers when
> IEEE80211_TX_CTL_ASSIGN_SEQ is not set, and leaving hw_seq_mode
> enabled even on injected control frames that have no seq_ctrl field.
> Conversely, injected data frames leave hw_seq_mode unset when
> ASSIGN_SEQ is requested on a monitor interface.
> - Unicast frames unconditionally set RTS_EN = 1 and HW_RTS_EN = 1 in
> txwd_info4. On normal traffic HW_RTS_EN = 1 gates RTS on the MAC
> length/duration threshold (4080B / 2816us), whereas for injected
> frames RTS_EN must follow IEEE80211_TX_RC_USE_RTS_CTS with
> HW_RTS_EN = 0 so short frames requesting RTS/CTS actually emit RTS.
No need to describe driver behavior.
> - IEEE80211_TX_CTL_NO_ACK (e.g. IEEE80211_RADIOTAP_F_TX_NOACK) neither
> sets BE_TXD_BODY6_NO_ACK on Wi-Fi 7 descriptors nor bounds retries,
> causing unacknowledged frames to be retransmitted up to the retry
> limit. Note that Wi-Fi 6 TXWD v0 chips (RTL8852A/B, RTL8851B) have
> no dedicated per-packet NO_ACK descriptor bit and rely on
> tx_cnt_lmt = 1 to suppress retransmissions; when that single attempt
> completes with RTW89_TX_RETRY_LIMIT, suppress false tx_retry_lmt
> accounting in rtw89_pci_tx_status() and set
> IEEE80211_TX_STAT_NOACK_TRANSMITTED in rtw89_tx_rpt_tx_status() too.
> - hw->max_rate_tries is left at the mac80211 default (4), truncating
> IEEE80211_RADIOTAP_DATA_RETRIES, and info->control.rates[0].count is
> ignored when a radiotap rate is specified.
> - Positive radiotap HT/VHT/legacy rate indices are added to the table
> base without clamping to the chip's valid MCS or legacy rate bounds.
>
> Configure hardware sequence assignment according to
> IEEE80211_TX_CTL_ASSIGN_SEQ (and never on control frames), drive
> rts_en and hw_rts_en for radiotap RTS/CTS, advertise
> RTW89_TX_DATA_CNT_LMT_MAX (63) in hw->max_rate_tries, honor
> rates[0].count and NO_ACK descriptor/status semantics, and clamp
> positive radiotap rate indices to valid hardware ranges.
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/core.c | 63 ++++++++++++++++++-----
> drivers/net/wireless/realtek/rtw89/core.h | 4 ++
> drivers/net/wireless/realtek/rtw89/mac.h | 2 +
> drivers/net/wireless/realtek/rtw89/pci.c | 3 +-
> 4 files changed, 58 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/core.c b/drivers/net/wireless/realtek/rtw89/core.c
> index 84c12c6..7d174d2 100644
> --- a/drivers/net/wireless/realtek/rtw89/core.c
> +++ b/drivers/net/wireless/realtek/rtw89/core.c
> @@ -1252,12 +1252,43 @@ static void rtw89_core_tx_update_injection(struct rtw89_dev *rtwdev,
> const struct rtw89_hw_rate_def *hw_rate = &rtw89_hw_rate[rtwdev->chip->chip_gen];
> enum mac80211_rate_control_flags flags = info->control.rates[0].flags;
> struct rtw89_tx_desc_info *desc_info = &tx_req->desc_info;
> + struct ieee80211_hdr *hdr = (void *)tx_req->skb->data;
> const struct rtw89_chan *chan;
> s8 idx = info->control.rates[0].idx;
> - u8 nss, mcs;
> + u8 nss, mcs, max_mcs;
>
> desc_info->use_rate = true;
> desc_info->dis_data_fb = true;
> + desc_info->hw_rts_en = false;
> + desc_info->rts_en = (flags & IEEE80211_TX_RC_USE_RTS_CTS) &&
> + !desc_info->is_bmc &&
> + !(info->flags & IEEE80211_TX_CTL_NO_ACK);
> +
> + /* Control frames have no seq_ctrl field; otherwise keep the
> + * sequence number supplied by user space unless ASSIGN_SEQ is set.
> + */
> + if (!(info->flags & IEEE80211_TX_CTL_ASSIGN_SEQ) ||
> + ieee80211_is_ctl(hdr->frame_control)) {
> + desc_info->upd_wlan_hdr = false;
Does it need to update this?
> + desc_info->hw_ssn_sel = 0;
> + desc_info->hw_seq_mode = 0;
> + } else {
> + desc_info->hw_ssn_sel = RTW89_MGMT_HW_SSN_SEL;
> + desc_info->hw_seq_mode = RTW89_MGMT_HW_SEQ_MODE;
This is only for MGMT frames. If you inject QoS data frames, the sequence
number should count per TID. But for injection it seems not build BA seesion
, so this is harmless.
> + }
> +
> + /* Suppress hardware retransmissions (and ACK waiting on BE) for NO_ACK;
> + * otherwise honor explicit radiotap retry limits when a rate is set.
> + */
First line of block comment should be empty.
But this comment is not necessary. The code explains itself.
> + if (info->flags & IEEE80211_TX_CTL_NO_ACK) {
> + desc_info->no_ack = true;
> + desc_info->tx_cnt_lmt_en = true;
> + desc_info->tx_cnt_lmt = 1;
> + } else if (info->control.rates[0].count) {
> + desc_info->tx_cnt_lmt_en = true;
> + desc_info->tx_cnt_lmt = umin(info->control.rates[0].count,
> + RTW89_TX_DATA_CNT_LMT_MAX);
You have set
hw->max_rate_tries = RTW89_TX_DATA_CNT_LMT_MAX;
Is it still necessary to have umin()?
> + }
>
> /* No rate was given in the radiotap header. Management frames
> * already carry the rate from rtw89_core_tx_update_mgmt_info(), so
> @@ -1283,16 +1314,20 @@ static void rtw89_core_tx_update_injection(struct rtw89_dev *rtwdev,
> desc_info->gi_ltf = 1;
>
> if (flags & IEEE80211_TX_RC_VHT_MCS) {
> + max_mcs = rtwdev->chip->chip_gen == RTW89_CHIP_BE ? 11 : 9;
I think the maximum standard VHT MCS rate is 9. Just use 9 inline.
> nss = umin(idx >> 4, ARRAY_SIZE(hw_rate->vht) - 1);
> - mcs = idx & 0xf;
> + mcs = umin(idx & 0xf, max_mcs);
> desc_info->data_rate = hw_rate->vht[nss] + mcs;
> } else if (flags & IEEE80211_TX_RC_MCS) {
> - desc_info->data_rate = hw_rate->ht + idx;
> + desc_info->data_rate = hw_rate->ht + umin(idx, 31);
> } else {
> chan = rtw89_chan_get(rtwdev, tx_req->rtwvif_link->chanctx_idx);
> -
> - desc_info->data_rate = idx + (chan->band_type == RTW89_BAND_2G ?
> - RTW89_HW_RATE_CCK1 : RTW89_HW_RATE_OFDM6);
> + if (chan->band_type == RTW89_BAND_2G)
> + desc_info->data_rate = RTW89_HW_RATE_CCK1 +
> + umin(idx, 11);
> + else
> + desc_info->data_rate = RTW89_HW_RATE_OFDM6 +
> + umin(idx, 7);
> }
> }
>
[...]
> diff --git a/drivers/net/wireless/realtek/rtw89/pci.c b/drivers/net/wireless/realtek/rtw89/pci.c
> index 6d19e75..6c4d6c0 100644
> --- a/drivers/net/wireless/realtek/rtw89/pci.c
> +++ b/drivers/net/wireless/realtek/rtw89/pci.c
> @@ -475,7 +475,8 @@ static void rtw89_pci_tx_status(struct rtw89_dev *rtwdev,
> if (tx_status == RTW89_TX_DONE) {
> info->flags |= IEEE80211_TX_STAT_ACK;
> tx_ring->tx_acked++;
> - } else {
> + } else if (!(info->flags & IEEE80211_TX_CTL_NO_ACK) ||
> + tx_status != RTW89_TX_RETRY_LIMIT) {
Will it be a problem without this change?
This branch is only to sum internal counters of the driver.
> if (info->flags & IEEE80211_TX_CTL_REQ_TX_STATUS)
> rtw89_debug(rtwdev, RTW89_DBG_FW,
> "failed to TX of status %x\n", tx_status);
> --
> 2.56.0.windows.4
^ permalink raw reply [flat|nested] 22+ messages in thread
* RE: [PATCH rtw-next v5 10/10] wifi: rtw89: restore channel when leaving idle on non-chanctx devices
2026-11-13 23:52 ` [PATCH rtw-next v5 10/10] wifi: rtw89: restore channel when leaving idle on non-chanctx devices Enver Ikromov
@ 2026-11-16 3:45 ` Ping-Ke Shih
0 siblings, 0 replies; 22+ messages in thread
From: Ping-Ke Shih @ 2026-11-16 3:45 UTC (permalink / raw)
To: Enver Ikromov
Cc: linux-wireless@vger.kernel.org, linux-kernel@vger.kernel.org
Enver Ikromov <owner@ph4ntom-rev.uz> wrote:
> rtw89_alloc_ieee80211_hw() disables native chanctx callbacks
> (ops->assign_vif_chanctx = NULL) and relies on mac80211 chanctx
> emulation via hw->conf.chandef and rtw89_ops_config() whenever
> chip->support_chanctx_num == 0 or the loaded firmware lacks
> SCAN_OFFLOAD or BEACON_FILTER (for example on RTL8852AE with firmware
> 0.13.36.2, where support_chanctx_num == 1 but BEACON_FILTER is absent).
>
> When the last monitor interface is brought down or deleted (or all
> interfaces become idle), rtw89_ops_stop() / rtw89_enter_ips() powers
> down the MAC/BB/RF and clears the RTW89_PHY_0 entity state while
> mac80211 retains local->hw.conf.chandef.
> When a monitor interface
> (including a concurrent MONITOR_FLAG_ACTIVE interface alongside an
> unassociated STA, where __ieee80211_recalc_idle() clears
> IEEE80211_CONF_IDLE without setting IEEE80211_CONF_MONITOR) is brought
> up on the same channel, rtw89_ops_start() sets RTW89_FLAG_POWERON
> without programming the channel (so rtw89_leave_ips() returns early),
> and ieee80211_hw_conf_chan() omits IEEE80211_CONF_CHANGE_CHANNEL
> because chandef is unchanged, leaving RX/TX silent until a manual
> channel change.
This should be the first paragraph to explain why you need this patch.
The commit message may just say that fix the channel in monitor doesn't
restore after monitor interface down/up.
The detail trace can be second paragraph or not necessary.
The LLM provide the trace is good to understand what/how it does, but
not suitable for commit message always.
Please rephrase commit message.
>
> In rtw89_ops_config(), when IEEE80211_CONF_CHANGE_IDLE or
> IEEE80211_CONF_CHANGE_MONITOR leaves the device non-idle on hardware
> without assign_vif_chanctx and RTW89_PHY_0 is not yet active, apply
> hw->conf.chandef and call rtw89_set_channel(). When
> IEEE80211_CONF_CHANGE_CHANNEL has already configured RTW89_PHY_0, the
> entity state check avoids redundant RF calibration.
>
> Signed-off-by: Enver Ikromov <owner@ph4ntom-rev.uz>
> ---
> drivers/net/wireless/realtek/rtw89/mac80211.c | 11 +++++++++++
> 1 file changed, 11 insertions(+)
>
> diff --git a/drivers/net/wireless/realtek/rtw89/mac80211.c
> b/drivers/net/wireless/realtek/rtw89/mac80211.c
> index c8a6003..3649a7a 100644
> --- a/drivers/net/wireless/realtek/rtw89/mac80211.c
> +++ b/drivers/net/wireless/realtek/rtw89/mac80211.c
> @@ -152,6 +152,17 @@ static int rtw89_ops_config(struct ieee80211_hw *hw, int radio_idx, u32 changed)
> if (changed & IEEE80211_CONF_CHANGE_MONITOR)
> rtw89_physts_parsing_init(rtwdev);
>
> + if ((changed & (IEEE80211_CONF_CHANGE_IDLE |
> + IEEE80211_CONF_CHANGE_MONITOR)) &&
> + !(hw->conf.flags & IEEE80211_CONF_IDLE) &&
> + !rtwdev->ops->assign_vif_chanctx &&
This might be the first condition 'no_chanctx'.
Declare a local variable 'no_chanctx = !rtwdev->ops->assign_vif_chanctx';
Move this upward after rtw89_leave_ps_mode(), and update the 'changed'
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
to share existing code.
bool no_chanctx = !rtwdev->ops->assign_vif_chanctx;
if (no_chanctx &&
(changed & (IEEE80211_CONF_CHANGE_IDLE | IEEE80211_CONF_CHANGE_MONITOR) ==
(IEEE80211_CONF_CHANGE_IDLE | IEEE80211_CONF_CHANGE_MONITOR)) {
if (!(hw->conf.flags & IEEE80211_CONF_IDLE))
changed |= IEEE80211_CONF_CHANGE_CHANNEL;
}
> + !rtw89_get_entity_state(rtwdev, RTW89_PHY_0) &&
> + cfg80211_chandef_valid(&hw->conf.chandef)) {
> + rtw89_config_entity_chandef(rtwdev, RTW89_CHANCTX_0,
> + &hw->conf.chandef);
> + rtw89_set_channel(rtwdev);
> + }
> +
> return 0;
> }
>
> --
> 2.56.0.windows.4
^ permalink raw reply [flat|nested] 22+ messages in thread
end of thread, other threads:[~2026-11-16 3:45 UTC | newest]
Thread overview: 22+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-13 23:52 [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Enver Ikromov
2026-11-13 23:52 ` [PATCH rtw-next v5 01/10] wifi: rtw89: avoid NULL vif dereference in rtw89_ops_tx() Enver Ikromov
2026-11-15 3:23 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 02/10] wifi: rtw89: handle negative rate index for injected frames Enver Ikromov
2026-11-15 3:38 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 03/10] wifi: rtw89: fix RX filter configuration for monitor mode Enver Ikromov
2026-11-15 3:48 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 04/10] wifi: rtw89: protect pure_monitor_mode_vif with RCU Enver Ikromov
2026-11-15 4:00 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 05/10] wifi: rtw89: use AP self role for monitor interfaces Enver Ikromov
2026-11-15 4:08 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 06/10] wifi: rtw89: transmit frames from " Enver Ikromov
2026-11-16 1:35 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 07/10] wifi: rtw89: send injected control frames through the management path Enver Ikromov
2026-11-16 2:14 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 08/10] wifi: rtw89: skip host-side TX hooks for injected frames Enver Ikromov
2026-11-16 2:20 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 09/10] wifi: rtw89: honor ASSIGN_SEQ, retries, and NO_ACK " Enver Ikromov
2026-11-16 3:00 ` Ping-Ke Shih
2026-11-13 23:52 ` [PATCH rtw-next v5 10/10] wifi: rtw89: restore channel when leaving idle on non-chanctx devices Enver Ikromov
2026-11-16 3:45 ` Ping-Ke Shih
2026-11-15 3:12 ` [PATCH rtw-next v5 00/10] wifi: rtw89: monitor mode RX filter and raw frame injection fixes Ping-Ke Shih
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox;
as well as URLs for NNTP newsgroup(s).