public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org, boris.ostrovsky@oracle.com,
	Stefano Stabellini <stefano@aporeto.com>
Subject: Re: [PATCH v1 02/13] xen/pvcalls: connect to the backend
Date: Mon, 24 Jul 2017 21:23:39 +0200	[thread overview]
Message-ID: <a8d4bf5c-e509-c673-8892-fe6a6bc83aad@suse.com> (raw)
In-Reply-To: <1500682323-25940-2-git-send-email-sstabellini@kernel.org>

On 22/07/17 02:11, Stefano Stabellini wrote:
> Implement the probe function for the pvcalls frontend. Read the
> supported versions, max-page-order and function-calls nodes from
> xenstore.
> 
> Introduce a data structure named pvcalls_bedata. It contains pointers to
> the command ring, the event channel, a list of active sockets and a list
> of passive sockets. Lists accesses are protected by a spin_lock.
> 
> Introduce a waitqueue to allow waiting for a response on commands sent
> to the backend.
> 
> Introduce an array of struct xen_pvcalls_response to store commands
> responses.
> 
> Only one frontend<->backend connection is supported at any given time
> for a guest. Store the active frontend device to a static pointer.
> 
> Introduce a stub functions for the event handler.
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
>  drivers/xen/pvcalls-front.c | 153 ++++++++++++++++++++++++++++++++++++++++++++
>  1 file changed, 153 insertions(+)
> 
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index 173e204..fb08ebf 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -20,6 +20,29 @@
>  #include <xen/xenbus.h>
>  #include <xen/interface/io/pvcalls.h>
>  
> +#define PVCALLS_INVALID_ID (UINT_MAX)
> +#define RING_ORDER XENBUS_MAX_RING_GRANT_ORDER
> +#define PVCALLS_NR_REQ_PER_RING __CONST_RING_SIZE(xen_pvcalls, XEN_PAGE_SIZE)
> +
> +struct pvcalls_bedata {
> +	struct xen_pvcalls_front_ring ring;
> +	grant_ref_t ref;
> +	int irq;
> +
> +	struct list_head socket_mappings;
> +	struct list_head socketpass_mappings;
> +	spinlock_t pvcallss_lock;
> +
> +	wait_queue_head_t inflight_req;
> +	struct xen_pvcalls_response rsp[PVCALLS_NR_REQ_PER_RING];
> +};
> +struct xenbus_device *pvcalls_front_dev;
> +
> +static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
> +{
> +	return IRQ_HANDLED;
> +}
> +
>  static const struct xenbus_device_id pvcalls_front_ids[] = {
>  	{ "pvcalls" },
>  	{ "" }
> @@ -33,7 +56,114 @@ static int pvcalls_front_remove(struct xenbus_device *dev)
>  static int pvcalls_front_probe(struct xenbus_device *dev,
>  			  const struct xenbus_device_id *id)
>  {
> +	int ret = -EFAULT, evtchn, ref = -1, i;
> +	unsigned int max_page_order, function_calls, len;
> +	char *versions;
> +	grant_ref_t gref_head = 0;
> +	struct xenbus_transaction xbt;
> +	struct pvcalls_bedata *bedata = NULL;
> +	struct xen_pvcalls_sring *sring;
> +
> +	if (pvcalls_front_dev != NULL) {
> +		dev_err(&dev->dev, "only one PV Calls connection supported\n");
> +		return -EINVAL;
> +	}
> +
> +	versions = xenbus_read(XBT_NIL, dev->otherend, "versions", &len);
> +	if (!len)
> +		return -EINVAL;
> +	if (strcmp(versions, "1")) {
> +		kfree(versions);
> +		return -EINVAL;
> +	}
> +	kfree(versions);
> +	ret = xenbus_scanf(XBT_NIL, dev->otherend,
> +			   "max-page-order", "%u", &max_page_order);

Use xenbus_read_unsigned() instead?

> +	if (ret <= 0)
> +		return -ENODEV;
> +	if (max_page_order < RING_ORDER)
> +		return -ENODEV;
> +	ret = xenbus_scanf(XBT_NIL, dev->otherend,
> +			   "function-calls", "%u", &function_calls);

xenbus_read_unsigned() again?

> +	if (ret <= 0 || function_calls != 1)
> +		return -ENODEV;
> +	pr_info("%s max-page-order is %u\n", __func__, max_page_order);
> +
> +	bedata = kzalloc(sizeof(struct pvcalls_bedata), GFP_KERNEL);
> +	if (!bedata)
> +		return -ENOMEM;
> +

You should call dev_set_drvdata() here already, otherwise entering the
error path will dereference a NULL pointer instead of bedata.

> +	init_waitqueue_head(&bedata->inflight_req);
> +	for (i = 0; i < PVCALLS_NR_REQ_PER_RING; i++)
> +		bedata->rsp[i].req_id = PVCALLS_INVALID_ID;
> +
> +	sring = (struct xen_pvcalls_sring *) __get_free_page(GFP_KERNEL |
> +							     __GFP_ZERO);
> +	if (!sring)
> +		goto error;

ret will be 1 here. Shouldn't you set it to -ENOMEM?

> +	SHARED_RING_INIT(sring);
> +	FRONT_RING_INIT(&bedata->ring, sring, XEN_PAGE_SIZE);
> +
> +	ret = xenbus_alloc_evtchn(dev, &evtchn);
> +	if (ret)
> +		goto error;
> +
> +	bedata->irq = bind_evtchn_to_irqhandler(evtchn,
> +						pvcalls_front_event_handler,
> +						0, "pvcalls-frontend", dev);
> +	if (bedata->irq < 0) {
> +		ret = bedata->irq;
> +		goto error;
> +	}
> +
> +	ret = gnttab_alloc_grant_references(1, &gref_head);
> +	if (ret < 0)
> +		goto error;
> +	bedata->ref = ref = gnttab_claim_grant_reference(&gref_head);
> +	if (ref < 0)
> +		goto error;

Setting ret?


Juergen

> +	gnttab_grant_foreign_access_ref(ref, dev->otherend_id,
> +					virt_to_gfn((void *)sring), 0);
> +
> + again:
> +	ret = xenbus_transaction_start(&xbt);
> +	if (ret) {
> +		xenbus_dev_fatal(dev, ret, "starting transaction");
> +		goto error;
> +	}
> +	ret = xenbus_printf(xbt, dev->nodename, "version", "%u", 1);
> +	if (ret)
> +		goto error_xenbus;
> +	ret = xenbus_printf(xbt, dev->nodename, "ring-ref", "%d", ref);
> +	if (ret)
> +		goto error_xenbus;
> +	ret = xenbus_printf(xbt, dev->nodename, "port", "%u",
> +			    evtchn);
> +	if (ret)
> +		goto error_xenbus;
> +	ret = xenbus_transaction_end(xbt, 0);
> +	if (ret) {
> +		if (ret == -EAGAIN)
> +			goto again;
> +		xenbus_dev_fatal(dev, ret, "completing transaction");
> +		goto error;
> +	}
> +
> +	INIT_LIST_HEAD(&bedata->socket_mappings);
> +	INIT_LIST_HEAD(&bedata->socketpass_mappings);
> +	spin_lock_init(&bedata->pvcallss_lock);
> +	dev_set_drvdata(&dev->dev, bedata);
> +	pvcalls_front_dev = dev;
> +	xenbus_switch_state(dev, XenbusStateInitialised);
> +
>  	return 0;
> +
> + error_xenbus:
> +	xenbus_transaction_end(xbt, 1);
> +	xenbus_dev_fatal(dev, ret, "writing xenstore");
> + error:
> +	pvcalls_front_remove(dev);
> +	return ret;
>  }
>  
>  static int pvcalls_front_resume(struct xenbus_device *dev)
> @@ -45,6 +175,29 @@ static int pvcalls_front_resume(struct xenbus_device *dev)
>  static void pvcalls_front_changed(struct xenbus_device *dev,
>  			    enum xenbus_state backend_state)
>  {
> +	switch (backend_state) {
> +	case XenbusStateReconfiguring:
> +	case XenbusStateReconfigured:
> +	case XenbusStateInitialising:
> +	case XenbusStateInitialised:
> +	case XenbusStateUnknown:
> +		break;
> +
> +	case XenbusStateInitWait:
> +		break;
> +
> +	case XenbusStateConnected:
> +		xenbus_switch_state(dev, XenbusStateConnected);
> +		break;
> +
> +	case XenbusStateClosed:
> +		if (dev->state == XenbusStateClosed)
> +			break;
> +		/* Missed the backend's CLOSING state -- fallthrough */
> +	case XenbusStateClosing:
> +		xenbus_frontend_closed(dev);
> +		break;
> +	}
>  }
>  
>  static struct xenbus_driver pvcalls_front_driver = {
> 

  reply	other threads:[~2017-07-24 19:23 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-22  0:11 [PATCH v1 00/13] introduce the Xen PV Calls frontend Stefano Stabellini
2017-07-22  0:11 ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 02/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-07-24 19:23     ` Juergen Gross [this message]
2017-07-25 20:10       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 03/13] xen/pvcalls: implement socket command and handle events Stefano Stabellini
2017-07-24 19:29     ` Juergen Gross
2017-07-25 20:43       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 04/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-24 19:40     ` Juergen Gross
2017-07-24 22:45       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 05/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-24 19:43     ` Juergen Gross
2017-07-24 22:51       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 06/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-24 19:44     ` Juergen Gross
2017-07-24 22:51       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 07/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-24 19:47     ` Juergen Gross
2017-07-24 22:53       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 08/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-07-24 19:51     ` Juergen Gross
2017-07-24 22:38       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 09/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-07-24 19:56     ` Juergen Gross
2017-07-24 22:37       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 10/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-24 20:08     ` Juergen Gross
2017-07-25 20:59       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 11/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-24 20:14     ` Juergen Gross
2017-07-25 21:07       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 12/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-24 20:16     ` Juergen Gross
2017-07-22  0:12   ` [PATCH v1 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
2017-07-24 20:17     ` Juergen Gross
2017-07-24 22:36       ` Stefano Stabellini
2017-07-24 19:06   ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Juergen Gross
2017-07-24 22:32     ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=a8d4bf5c-e509-c673-8892-fe6a6bc83aad@suse.com \
    --to=jgross@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sstabellini@kernel.org \
    --cc=stefano@aporeto.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox