public inbox for linux-kernel@vger.kernel.org
 help / color / mirror / Atom feed
From: Juergen Gross <jgross@suse.com>
To: Stefano Stabellini <sstabellini@kernel.org>, xen-devel@lists.xen.org
Cc: linux-kernel@vger.kernel.org, boris.ostrovsky@oracle.com,
	Stefano Stabellini <stefano@aporeto.com>
Subject: Re: [PATCH v1 09/13] xen/pvcalls: implement recvmsg
Date: Mon, 24 Jul 2017 21:56:04 +0200	[thread overview]
Message-ID: <aaeaa565-19fb-0b2b-8a85-729a0e69d81b@suse.com> (raw)
In-Reply-To: <1500682323-25940-9-git-send-email-sstabellini@kernel.org>

On 22/07/17 02:11, Stefano Stabellini wrote:
> Implement recvmsg by copying data from the "in" ring. If not enough data
> is available and the recvmsg call is blocking, then wait on the
> inflight_conn_req waitqueue. Take the active socket in_mutex so that
> only one function can access the ring at any given time.
> 
> If not enough data is available on the ring, rather than returning
> immediately or sleep-waiting, spin for up to 5000 cycles. This small
> optimization turns out to improve performance and latency significantly.
> 
> Signed-off-by: Stefano Stabellini <stefano@aporeto.com>
> CC: boris.ostrovsky@oracle.com
> CC: jgross@suse.com
> ---
>  drivers/xen/pvcalls-front.c | 106 ++++++++++++++++++++++++++++++++++++++++++++
>  drivers/xen/pvcalls-front.h |   4 ++
>  2 files changed, 110 insertions(+)
> 
> diff --git a/drivers/xen/pvcalls-front.c b/drivers/xen/pvcalls-front.c
> index bf29f40..3d1041a 100644
> --- a/drivers/xen/pvcalls-front.c
> +++ b/drivers/xen/pvcalls-front.c
> @@ -94,6 +94,20 @@ static int pvcalls_front_write_todo(struct sock_mapping *map)
>  	return size - pvcalls_queued(prod, cons, size);
>  }
>  
> +static int pvcalls_front_read_todo(struct sock_mapping *map)

Return type bool?


Juergen

> +{
> +	struct pvcalls_data_intf *intf = map->active.ring;
> +	RING_IDX cons, prod;
> +	int32_t error;
> +
> +	cons = intf->in_cons;
> +	prod = intf->in_prod;
> +	error = intf->in_error;
> +	return (error != 0 ||
> +		pvcalls_queued(prod, cons,
> +			       XEN_FLEX_RING_SIZE(intf->ring_order))) != 0;
> +}
> +
>  static irqreturn_t pvcalls_front_event_handler(int irq, void *dev_id)
>  {
>  	struct xenbus_device *dev = dev_id;
> @@ -413,6 +427,98 @@ int pvcalls_front_sendmsg(struct socket *sock, struct msghdr *msg,
>  	return tot_sent;
>  }
>  
> +static int __read_ring(struct pvcalls_data_intf *intf,
> +		       struct pvcalls_data *data,
> +		       struct iov_iter *msg_iter,
> +		       size_t len, int flags)
> +{
> +	RING_IDX cons, prod, size, masked_prod, masked_cons;
> +	RING_IDX array_size = XEN_FLEX_RING_SIZE(intf->ring_order);
> +	int32_t error;
> +
> +	cons = intf->in_cons;
> +	prod = intf->in_prod;
> +	error = intf->in_error;
> +	/* get pointers before reading from the ring */
> +	virt_rmb();
> +	if (error < 0)
> +		return error;
> +
> +	size = pvcalls_queued(prod, cons, array_size);
> +	masked_prod = pvcalls_mask(prod, array_size);
> +	masked_cons = pvcalls_mask(cons, array_size);
> +
> +	if (size == 0)
> +		return 0;
> +
> +	if (len > size)
> +		len = size;
> +
> +	if (masked_prod > masked_cons) {
> +		copy_to_iter(data->in + masked_cons, len, msg_iter);
> +	} else {
> +		if (len > (array_size - masked_cons)) {
> +			copy_to_iter(data->in + masked_cons,
> +				     array_size - masked_cons, msg_iter);
> +			copy_to_iter(data->in,
> +				     len - (array_size - masked_cons),
> +				     msg_iter);
> +		} else {
> +			copy_to_iter(data->in + masked_cons, len, msg_iter);
> +		}
> +	}
> +	/* read data from the ring before increasing the index */
> +	virt_mb();
> +	if (!(flags & MSG_PEEK))
> +		intf->in_cons += len;
> +
> +	return len;
> +}
> +
> +int pvcalls_front_recvmsg(struct socket *sock, struct msghdr *msg, size_t len,
> +		     int flags)
> +{
> +	struct pvcalls_bedata *bedata;
> +	int ret = -EAGAIN;
> +	struct sock_mapping *map;
> +	int count = 0;
> +
> +	if (!pvcalls_front_dev)
> +		return -ENOTCONN;
> +	bedata = dev_get_drvdata(&pvcalls_front_dev->dev);
> +
> +	map = (struct sock_mapping *) READ_ONCE(sock->sk->sk_send_head);
> +	if (!map)
> +		return -ENOTSOCK;
> +
> +	if (flags & (MSG_CMSG_CLOEXEC|MSG_ERRQUEUE|MSG_OOB|MSG_TRUNC))
> +		return -EOPNOTSUPP;
> +
> +	mutex_lock(&map->active.in_mutex);
> +	if (len > XEN_FLEX_RING_SIZE(map->active.ring->ring_order))
> +		len = XEN_FLEX_RING_SIZE(map->active.ring->ring_order);
> +
> +	while (!(flags & MSG_DONTWAIT) && !pvcalls_front_read_todo(map)) {
> +		if (count < PVCALLS_FRON_MAX_SPIN)
> +			count++;
> +		else
> +			wait_event_interruptible(map->active.inflight_conn_req,
> +						 pvcalls_front_read_todo(map));
> +	}
> +	ret = __read_ring(map->active.ring, &map->active.data,
> +			  &msg->msg_iter, len, flags);
> +
> +	if (ret > 0)
> +		notify_remote_via_irq(map->active.irq);
> +	if (ret == 0)
> +		ret = -EAGAIN;
> +	if (ret == -ENOTCONN)
> +		ret = 0;
> +
> +	mutex_unlock(&map->active.in_mutex);
> +	return ret;
> +}
> +
>  int pvcalls_front_bind(struct socket *sock, struct sockaddr *addr, int addr_len)
>  {
>  	struct pvcalls_bedata *bedata;
> diff --git a/drivers/xen/pvcalls-front.h b/drivers/xen/pvcalls-front.h
> index d937c24..de24041 100644
> --- a/drivers/xen/pvcalls-front.h
> +++ b/drivers/xen/pvcalls-front.h
> @@ -16,5 +16,9 @@ int pvcalls_front_accept(struct socket *sock,
>  int pvcalls_front_sendmsg(struct socket *sock,
>  			  struct msghdr *msg,
>  			  size_t len);
> +int pvcalls_front_recvmsg(struct socket *sock,
> +			  struct msghdr *msg,
> +			  size_t len,
> +			  int flags);
>  
>  #endif
> 

  reply	other threads:[~2017-07-24 19:56 UTC|newest]

Thread overview: 39+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2017-07-22  0:11 [PATCH v1 00/13] introduce the Xen PV Calls frontend Stefano Stabellini
2017-07-22  0:11 ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 02/13] xen/pvcalls: connect to the backend Stefano Stabellini
2017-07-24 19:23     ` Juergen Gross
2017-07-25 20:10       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 03/13] xen/pvcalls: implement socket command and handle events Stefano Stabellini
2017-07-24 19:29     ` Juergen Gross
2017-07-25 20:43       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 04/13] xen/pvcalls: implement connect command Stefano Stabellini
2017-07-24 19:40     ` Juergen Gross
2017-07-24 22:45       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 05/13] xen/pvcalls: implement bind command Stefano Stabellini
2017-07-24 19:43     ` Juergen Gross
2017-07-24 22:51       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 06/13] xen/pvcalls: implement listen command Stefano Stabellini
2017-07-24 19:44     ` Juergen Gross
2017-07-24 22:51       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 07/13] xen/pvcalls: implement accept command Stefano Stabellini
2017-07-24 19:47     ` Juergen Gross
2017-07-24 22:53       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 08/13] xen/pvcalls: implement sendmsg Stefano Stabellini
2017-07-24 19:51     ` Juergen Gross
2017-07-24 22:38       ` Stefano Stabellini
2017-07-22  0:11   ` [PATCH v1 09/13] xen/pvcalls: implement recvmsg Stefano Stabellini
2017-07-24 19:56     ` Juergen Gross [this message]
2017-07-24 22:37       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 10/13] xen/pvcalls: implement poll command Stefano Stabellini
2017-07-24 20:08     ` Juergen Gross
2017-07-25 20:59       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 11/13] xen/pvcalls: implement release command Stefano Stabellini
2017-07-24 20:14     ` Juergen Gross
2017-07-25 21:07       ` Stefano Stabellini
2017-07-22  0:12   ` [PATCH v1 12/13] xen/pvcalls: implement frontend disconnect Stefano Stabellini
2017-07-24 20:16     ` Juergen Gross
2017-07-22  0:12   ` [PATCH v1 13/13] xen: introduce a Kconfig option to enable the pvcalls frontend Stefano Stabellini
2017-07-24 20:17     ` Juergen Gross
2017-07-24 22:36       ` Stefano Stabellini
2017-07-24 19:06   ` [PATCH v1 01/13] xen/pvcalls: introduce the pvcalls xenbus frontend Juergen Gross
2017-07-24 22:32     ` Stefano Stabellini

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=aaeaa565-19fb-0b2b-8a85-729a0e69d81b@suse.com \
    --to=jgross@suse.com \
    --cc=boris.ostrovsky@oracle.com \
    --cc=linux-kernel@vger.kernel.org \
    --cc=sstabellini@kernel.org \
    --cc=stefano@aporeto.com \
    --cc=xen-devel@lists.xen.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox