[PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups

[PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups

[Sebastian Reichel]

This series overhauls the Rockchip USBDP driver; apart from a
a bunch of cleanups and small improvements the main goal is to
get the driver ready for proper USB-C DP AltMode support.

Once this series has landed, it unblocks enabling proper USB-C
DP AltMode on the RK3588 and RK3576 platforms incl. runtime PM
for the Synopsys DesignWare DisplayPort controller.

Apart from this series, further changes are required on the
DRM side. There are no compile-time dependencies between the
DRM side and the PHY side, but the PHY side must be applied
to avoid SErrors once runtime PM is added to the DisplayPort
controller driver. Thus it would be really good to land this
series in the next merge window.

Changes in v4:
- Link to v3: https://lore.kernel.org/r/20260313-rockchip-usbdp-cleanup-v3-0-3e8fe89a35b5@collabora.com
- rebased to v7.1-rc1 (no changes)
- Update DRM bridge registration patch to avoid registration when DP aux
  port is not connected to anything, since this results in errors and some
  boards use USBDP instances for USB3 only.
- Add patch renaming mode_change into phy_needs_reinit
- Add patch to re-init PHY on orientation change
- Add patch to factor out lane_mux_sel setup
- Add patch to handle mutex via guard functions

Changes in v3:
- Link to v2: https://lore.kernel.org/r/20260213-rockchip-usbdp-cleanup-v2-0-b67ec225f96e@collabora.com
- Add patch to register the USBDP PHY as DRM bridge
- Add patch to describe ports in DT binding (used by the DRM bridge)
- Add patch to drop HPD handling from the PHY

Changes in v2:
- Link to v1: https://lore.kernel.org/r/20260203-rockchip-usbdp-cleanup-v1-0-16a6f92ed176@collabora.com
- Added new patches to fix USB3 SError

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
Frank Wang (1):
      phy: rockchip: usbdp: Amend SSC modulation deviation

Sebastian Reichel (13):
      dt-bindings: phy: rockchip-usbdp: add improved ports scheme
      phy: rockchip: usbdp: Do not loose USB3 PHY status
      phy: rockchip: usbdp: Keep clocks running on PHY re-init
      phy: rockchip: usbdp: Add missing mode_change update
      phy: rockchip: usbdp: Rename DP lane functions
      phy: rockchip: usbdp: Use FIELD_PREP_WM16_CONST
      phy: rockchip: usbdp: Cleanup DP lane selection function
      phy: rockchip: usbdp: Register DP aux bridge
      phy: rockchip: usbdp: Drop DP HPD handling
      phy: rockchip: usbdp: Rename mode_change to phy_needs_reinit
      phy: rockchip: usbdp: Re-init the PHY on orientation change
      phy: rockchip: usbdp: Factor out lane_mux_sel setup
      phy: rockchip: usbdp: Use guard functions for mutex

William Wu (1):
      phy: rockchip: usbdp: Fix LFPS detect threshold control

Zhang Yubing (1):
      phy: rockchip: usbdp: Support single-lane DP

 .../bindings/phy/phy-rockchip-usbdp.yaml           |  23 ++
 drivers/phy/rockchip/Kconfig                       |   2 +
 drivers/phy/rockchip/phy-rockchip-usbdp.c          | 302 +++++++++------------
 3 files changed, 149 insertions(+), 178 deletions(-)
---
base-commit: 254f49634ee16a731174d2ae34bc50bd5f45e731
change-id: 20260203-rockchip-usbdp-cleanup-5b59dfb561a3

Best regards,
-- 
Sebastian Reichel <sebastian.reichel@collabora.com>

[PATCH v4 01/16] dt-bindings: phy: rockchip-usbdp: add improved ports scheme

[Sebastian Reichel]

Currently the Rockchip USBDP PHY is missing a documented port scheme.
Meanwhile upstream RK3588 DTS files are a bit messy and use different
port schemes. The upstream USBDP PHY Linux kernel driver does not yet
parse the ports at all and thus does not create any implicit ABI either.

But with the current mess it is not possible to properly support USB-C
DP AltMode. Thus this introduces a proper port scheme following roughly
the ports design of the Qualcomm QMP USB4-USB3-DP PHY controller binding
with a slight difference that there is an additional port for the
USB-C SBU port as the Rockchip USB-DP PHY also contains the SBU mux.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 .../bindings/phy/phy-rockchip-usbdp.yaml           | 23 ++++++++++++++++++++++
 1 file changed, 23 insertions(+)

diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
index 8b7059d5b182..f728acf057e4 100644
--- a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
+++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
@@ -114,6 +114,29 @@ properties:
       A port node to link the PHY to a TypeC controller for the purpose of
       handling orientation switching.
 
+  ports:
+    $ref: /schemas/graph.yaml#/properties/ports
+    properties:
+      port@0:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of the PHY for USB (or DP when configured into 4 lane
+          mode), which should point to the superspeed port of a USB connector.
+
+      port@1:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the USB controller
+
+      port@2:
+        $ref: /schemas/graph.yaml#/properties/port
+        description: Incoming endpoint from the DisplayPort controller
+
+      port@3:
+        $ref: /schemas/graph.yaml#/properties/port
+        description:
+          Output endpoint of the PHY for DP, which should either point to the
+          SBU port of a USB-C connector or a DisplayPort connector input port.
+
 required:
   - compatible
   - reg

-- 
2.53.0

[PATCH v4 02/16] phy: rockchip: usbdp: Do not loose USB3 PHY status

[Sebastian Reichel]

By default (i.e. without manually enabling runtime PM) DWC3 requests the
USB3 PHY once and keeps it enabled all the time. When DisplayPort is
being requested later on, a mode change is needed. This re-initializes
the PHY. During re-initialization the status variable has incorrectly
been cleared, which means the tracking information for USB3 ist lost.

This is not an immediate problem, since the DP side keeps the PHY
enabled. But once DP is toggled off, the whole PHY will be disabled.
This is a problem, because the USB side still needs it powered.

Fix things by not clearing the status flags.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 1 -
 1 file changed, 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index fba35510d88c..744cc7c642f4 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1009,7 +1009,6 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
 			rk_udphy_u3_port_disable(udphy, false);
 	} else if (udphy->mode_change) {
 		udphy->mode_change = false;
-		udphy->status = UDPHY_MODE_NONE;
 		if (udphy->mode == UDPHY_MODE_DP)
 			rk_udphy_u3_port_disable(udphy, true);
 

-- 
2.53.0

[PATCH v4 03/16] phy: rockchip: usbdp: Keep clocks running on PHY re-init

[Sebastian Reichel]

When a mode change is required rk_udphy_power_on() disables
the clocks and then calls rk_udphy_setup(), which then enables
all the clocks again before continuing with rk_udphy_init().

Considering that rk_udphy_init() does assert the reset lines,
re-enabling the clocks is just delaying things. Avoid it by
directly calling rk_udphy_init().

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 +--
 1 file changed, 1 insertion(+), 2 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 744cc7c642f4..98562a888b42 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -1012,8 +1012,7 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
 		if (udphy->mode == UDPHY_MODE_DP)
 			rk_udphy_u3_port_disable(udphy, true);
 
-		rk_udphy_disable(udphy);
-		ret = rk_udphy_setup(udphy);
+		ret = rk_udphy_init(udphy);
 		if (ret)
 			return ret;
 	}

-- 
2.53.0

[PATCH v4 04/16] phy: rockchip: usbdp: Amend SSC modulation deviation

[Sebastian Reichel]

From: Frank Wang <frank.wang@rock-chips.com>

Move SSC modulation deviation into private config of clock

 - 24M: 0x00d4[5:0] = 0x30
 - 26M: 0x00d4[5:0] = 0x33

Signed-off-by: Frank Wang <frank.wang@rock-chips.com>
[Taken over from rockchip's kernel tree; register 0x00d4 is not
described in the TRM]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 8 ++++----
 1 file changed, 4 insertions(+), 4 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 98562a888b42..1f686844c337 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -350,7 +350,8 @@ static const struct reg_sequence rk_udphy_24m_refclk_cfg[] = {
 	{0x0a64, 0xa8}, {0x1a3c, 0xd0},
 	{0x1a44, 0xd0}, {0x1a48, 0x01},
 	{0x1a4c, 0x0d}, {0x1a54, 0xe0},
-	{0x1a5c, 0xe0}, {0x1a64, 0xa8}
+	{0x1a5c, 0xe0}, {0x1a64, 0xa8},
+	{0x00d4, 0x30}
 };
 
 static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = {
@@ -377,7 +378,7 @@ static const struct reg_sequence rk_udphy_26m_refclk_cfg[] = {
 	{0x0c30, 0x0e}, {0x0c48, 0x06},
 	{0x1c30, 0x0e}, {0x1c48, 0x06},
 	{0x028c, 0x18}, {0x0af0, 0x00},
-	{0x1af0, 0x00}
+	{0x1af0, 0x00}, {0x00d4, 0x33}
 };
 
 static const struct reg_sequence rk_udphy_init_sequence[] = {
@@ -412,8 +413,7 @@ static const struct reg_sequence rk_udphy_init_sequence[] = {
 	{0x0070, 0x7d}, {0x0074, 0x68},
 	{0x0af4, 0x1a}, {0x1af4, 0x1a},
 	{0x0440, 0x3f}, {0x10d4, 0x08},
-	{0x20d4, 0x08}, {0x00d4, 0x30},
-	{0x0024, 0x6e},
+	{0x20d4, 0x08}, {0x0024, 0x6e}
 };
 
 static inline int rk_udphy_grfreg_write(struct regmap *base,

-- 
2.53.0

[PATCH v4 05/16] phy: rockchip: usbdp: Fix LFPS detect threshold control

[Sebastian Reichel]

From: William Wu <william.wu@rock-chips.com>

According to the LFPS Tx Low Power/LFPS Rx Detect Threshold [1],
the device under test(DUT) must not respond if LFPS below the
minimum LFPS Rx Detect Threshold 100mV. Test fail on Rockchip
platforms, because the default LFPS detect threshold is set to
65mV.

The USBDP PHY LFPS detect threshold voltage could be set to
30mV ~ 140mV, and since there could be 10-20% PVT variation,
we set LFPS detect threshold voltage to 110mV.

[1] https://compliance.usb.org/resources/LFPS_Rx_Tx_Low_Power_Compliance_Update_Rev5.pdf

Signed-off-by: William Wu <william.wu@rock-chips.com>
[Taken over from rockchip's kernel tree; the registers are not described
in the TRM]
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 1f686844c337..97e53b933225 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -413,7 +413,8 @@ static const struct reg_sequence rk_udphy_init_sequence[] = {
 	{0x0070, 0x7d}, {0x0074, 0x68},
 	{0x0af4, 0x1a}, {0x1af4, 0x1a},
 	{0x0440, 0x3f}, {0x10d4, 0x08},
-	{0x20d4, 0x08}, {0x0024, 0x6e}
+	{0x20d4, 0x08}, {0x0024, 0x6e},
+	{0x09c0, 0x0a}, {0x19c0, 0x0a}
 };
 
 static inline int rk_udphy_grfreg_write(struct regmap *base,

-- 
2.53.0

[PATCH v4 06/16] phy: rockchip: usbdp: Add missing mode_change update

[Sebastian Reichel]

rk_udphy_set_typec_default_mapping() updates the available modes,
but does not set the mode_change as required. This results in
missing re-initialization and thus non-working DisplayPort.

Fix this issue by introducing a new helper to update the available
modes.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 16 +++++++++++-----
 1 file changed, 11 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 97e53b933225..febc148a754e 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -619,6 +619,15 @@ static void rk_udphy_dp_hpd_event_trigger(struct rk_udphy *udphy, bool hpd)
 	rk_udphy_grfreg_write(udphy->vogrf, &cfg->vogrfcfg[udphy->id].hpd_trigger, hpd);
 }
 
+static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
+{
+	if (udphy->mode == mode)
+		return;
+
+	udphy->mode_change = true;
+	udphy->mode = mode;
+}
+
 static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 {
 	if (udphy->flip) {
@@ -649,7 +658,7 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
 	}
 
-	udphy->mode = UDPHY_MODE_DP_USB;
+	rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
 }
 
 static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -1385,10 +1394,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 			usleep_range(750, 800);
 			rk_udphy_dp_hpd_event_trigger(udphy, true);
 		} else if (data->status & DP_STATUS_HPD_STATE) {
-			if (udphy->mode != mode) {
-				udphy->mode = mode;
-				udphy->mode_change = true;
-			}
+			rk_udphy_mode_set(udphy, mode);
 			rk_udphy_dp_hpd_event_trigger(udphy, true);
 		} else {
 			rk_udphy_dp_hpd_event_trigger(udphy, false);

-- 
2.53.0

[PATCH v4 07/16] phy: rockchip: usbdp: Support single-lane DP

[Sebastian Reichel]

From: Zhang Yubing <yubing.zhang@rock-chips.com>

Implement support for using just a single DisplayPort line.

Signed-off-by: Zhang Yubing <yubing.zhang@rock-chips.com>
Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 61 +++++++++++++------------------
 1 file changed, 25 insertions(+), 36 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index febc148a754e..bf8394174294 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -193,6 +193,7 @@ struct rk_udphy {
 	int id;
 
 	bool dp_in_use;
+	int dp_lanes;
 
 	/* PHY const config */
 	const struct rk_udphy_cfg *cfgs;
@@ -537,6 +538,13 @@ static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
  * <0 1>                  dpln0         dpln1       usbrx         usbtx
  * <2 3>                  usbrx         usbtx       dpln0         dpln1
  * ---------------------------------------------------------------------------
+ * if 1 lane for dp function, 2 lane for usb function, define rockchip,dp-lane-mux = <x>;
+ * sample as follow:
+ * ---------------------------------------------------------------------------
+ *                        B11-B10       A2-A3       A11-A10       B2-B3
+ * rockchip,dp-lane-mux   ln0(tx/rx)    ln1(tx)     ln2(tx/rx)    ln3(tx)
+ * <0>                    dpln0         \           usbrx         usbtx
+ * ---------------------------------------------------------------------------
  */
 
 static void rk_udphy_dplane_select(struct rk_udphy *udphy)
@@ -544,18 +552,18 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	u32 value = 0;
 
-	switch (udphy->mode) {
-	case UDPHY_MODE_DP:
-		value |= 2 << udphy->dp_lane_sel[2] * 2;
+	switch (udphy->dp_lanes) {
+	case 4:
 		value |= 3 << udphy->dp_lane_sel[3] * 2;
+		value |= 2 << udphy->dp_lane_sel[2] * 2;
 		fallthrough;
 
-	case UDPHY_MODE_DP_USB:
-		value |= 0 << udphy->dp_lane_sel[0] * 2;
+	case 2:
 		value |= 1 << udphy->dp_lane_sel[1] * 2;
-		break;
+		fallthrough;
 
-	case UDPHY_MODE_USB:
+	case 1:
+		value |= 0 << udphy->dp_lane_sel[0] * 2;
 		break;
 
 	default:
@@ -568,28 +576,6 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
 		     FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
 }
 
-static int rk_udphy_dplane_get(struct rk_udphy *udphy)
-{
-	int dp_lanes;
-
-	switch (udphy->mode) {
-	case UDPHY_MODE_DP:
-		dp_lanes = 4;
-		break;
-
-	case UDPHY_MODE_DP_USB:
-		dp_lanes = 2;
-		break;
-
-	case UDPHY_MODE_USB:
-	default:
-		dp_lanes = 0;
-		break;
-	}
-
-	return dp_lanes;
-}
-
 static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
 {
 	u32 val = 0;
@@ -659,6 +645,7 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 	}
 
 	rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
+	udphy->dp_lanes = 2;
 }
 
 static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -897,7 +884,7 @@ static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
 		return 0;
 	}
 
-	if (num_lanes != 2 && num_lanes != 4)
+	if (num_lanes != 1 && num_lanes != 2 && num_lanes != 4)
 		return dev_err_probe(udphy->dev, -EINVAL,
 				     "invalid number of lane mux\n");
 
@@ -923,7 +910,8 @@ static int rk_udphy_parse_lane_mux_data(struct rk_udphy *udphy)
 	}
 
 	udphy->mode = UDPHY_MODE_DP;
-	if (num_lanes == 2) {
+	udphy->dp_lanes = num_lanes;
+	if (num_lanes == 1 || num_lanes == 2) {
 		udphy->mode |= UDPHY_MODE_USB;
 		udphy->flip = (udphy->lane_mux_sel[0] == PHY_LANE_MUX_DP);
 	}
@@ -1074,18 +1062,17 @@ static int rk_udphy_dp_phy_exit(struct phy *phy)
 static int rk_udphy_dp_phy_power_on(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
-	int ret, dp_lanes;
+	int ret;
 
 	mutex_lock(&udphy->mutex);
 
-	dp_lanes = rk_udphy_dplane_get(udphy);
-	phy_set_bus_width(phy, dp_lanes);
+	phy_set_bus_width(phy, udphy->dp_lanes);
 
 	ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
 	if (ret)
 		goto unlock;
 
-	rk_udphy_dplane_enable(udphy, dp_lanes);
+	rk_udphy_dplane_enable(udphy, udphy->dp_lanes);
 
 	rk_udphy_dplane_select(udphy);
 
@@ -1365,6 +1352,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
 		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
 		mode = UDPHY_MODE_DP;
+		udphy->dp_lanes = 4;
 		break;
 
 	case TYPEC_DP_STATE_D:
@@ -1381,6 +1369,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 			udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
 		}
 		mode = UDPHY_MODE_DP_USB;
+		udphy->dp_lanes = 2;
 		break;
 	}
 
@@ -1529,7 +1518,7 @@ static int rk_udphy_probe(struct platform_device *pdev)
 		ret = PTR_ERR(udphy->phy_dp);
 		return dev_err_probe(dev, ret, "failed to create DP phy\n");
 	}
-	phy_set_bus_width(udphy->phy_dp, rk_udphy_dplane_get(udphy));
+	phy_set_bus_width(udphy->phy_dp, udphy->dp_lanes);
 	udphy->phy_dp->attrs.max_link_rate = 8100;
 	phy_set_drvdata(udphy->phy_dp, udphy);
 

-- 
2.53.0

[PATCH v4 08/16] phy: rockchip: usbdp: Rename DP lane functions

[Sebastian Reichel]

The common prefix for DisplayPort related functions is rk_udphy_dp_
(with a final _), so update the two DP lane functions to follow that
scheme.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index bf8394174294..6d7ca11b308e 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -547,7 +547,7 @@ static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
  * ---------------------------------------------------------------------------
  */
 
-static void rk_udphy_dplane_select(struct rk_udphy *udphy)
+static void rk_udphy_dp_lane_select(struct rk_udphy *udphy)
 {
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
 	u32 value = 0;
@@ -576,7 +576,7 @@ static void rk_udphy_dplane_select(struct rk_udphy *udphy)
 		     FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
 }
 
-static void rk_udphy_dplane_enable(struct rk_udphy *udphy, int dp_lanes)
+static void rk_udphy_dp_lane_enable(struct rk_udphy *udphy, int dp_lanes)
 {
 	u32 val = 0;
 	int i;
@@ -1072,9 +1072,9 @@ static int rk_udphy_dp_phy_power_on(struct phy *phy)
 	if (ret)
 		goto unlock;
 
-	rk_udphy_dplane_enable(udphy, udphy->dp_lanes);
+	rk_udphy_dp_lane_enable(udphy, udphy->dp_lanes);
 
-	rk_udphy_dplane_select(udphy);
+	rk_udphy_dp_lane_select(udphy);
 
 unlock:
 	mutex_unlock(&udphy->mutex);
@@ -1092,7 +1092,7 @@ static int rk_udphy_dp_phy_power_off(struct phy *phy)
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
 	mutex_lock(&udphy->mutex);
-	rk_udphy_dplane_enable(udphy, 0);
+	rk_udphy_dp_lane_enable(udphy, 0);
 	rk_udphy_power_off(udphy, UDPHY_MODE_DP);
 	mutex_unlock(&udphy->mutex);
 

-- 
2.53.0

[PATCH v4 09/16] phy: rockchip: usbdp: Use FIELD_PREP_WM16_CONST

[Sebastian Reichel]

Cleanup code by replacing open-coded version of FIELD_PREP_WM16_CONST
with the existing helper macro.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 6d7ca11b308e..1bfc365e2b2c 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -12,6 +12,7 @@
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
+#include <linux/hw_bitfield.h>
 #include <linux/mfd/syscon.h>
 #include <linux/mod_devicetable.h>
 #include <linux/module.h>
@@ -75,7 +76,6 @@
 #define TRSV_LN2_MON_RX_CDR_DONE_OFFSET		0x1b84	/* trsv_reg06E1 */
 #define TRSV_LN2_MON_RX_CDR_LOCK_DONE		BIT(0)
 
-#define BIT_WRITEABLE_SHIFT			16
 #define PHY_AUX_DP_DATA_POL_NORMAL		0
 #define PHY_AUX_DP_DATA_POL_INVERT		1
 #define PHY_LANE_MUX_USB			0
@@ -104,8 +104,8 @@ struct rk_udphy_grf_reg {
 #define _RK_UDPHY_GEN_GRF_REG(offset, mask, disable, enable) \
 {\
 	offset, \
-	FIELD_PREP_CONST(mask, disable) | (mask << BIT_WRITEABLE_SHIFT), \
-	FIELD_PREP_CONST(mask, enable) | (mask << BIT_WRITEABLE_SHIFT), \
+	FIELD_PREP_WM16_CONST(mask, disable), \
+	FIELD_PREP_WM16_CONST(mask, enable), \
 }
 
 #define RK_UDPHY_GEN_GRF_REG(offset, bitend, bitstart, disable, enable) \

-- 
2.53.0

[PATCH v4 10/16] phy: rockchip: usbdp: Cleanup DP lane selection function

[Sebastian Reichel]

Use FIELD_PREP_WM16() helpers to simplify the DP lane selection
logic.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 28 +++++++---------------------
 1 file changed, 7 insertions(+), 21 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 1bfc365e2b2c..beab20e4c512 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -550,30 +550,16 @@ static void rk_udphy_usb_bvalid_enable(struct rk_udphy *udphy, u8 enable)
 static void rk_udphy_dp_lane_select(struct rk_udphy *udphy)
 {
 	const struct rk_udphy_cfg *cfg = udphy->cfgs;
-	u32 value = 0;
-
-	switch (udphy->dp_lanes) {
-	case 4:
-		value |= 3 << udphy->dp_lane_sel[3] * 2;
-		value |= 2 << udphy->dp_lane_sel[2] * 2;
-		fallthrough;
-
-	case 2:
-		value |= 1 << udphy->dp_lane_sel[1] * 2;
-		fallthrough;
+	u32 value = FIELD_PREP_WM16(DP_LANE_SEL_ALL, 0);
+	int i;
 
-	case 1:
-		value |= 0 << udphy->dp_lane_sel[0] * 2;
-		break;
+	for (i = 0; i < udphy->dp_lanes; i++)
+		value |= field_prep(DP_LANE_SEL_N(udphy->dp_lane_sel[i]), i);
 
-	default:
-		break;
-	}
+	value |= FIELD_PREP_WM16(DP_AUX_DIN_SEL, udphy->dp_aux_din_sel);
+	value |= FIELD_PREP_WM16(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel);
 
-	regmap_write(udphy->vogrf, cfg->vogrfcfg[udphy->id].dp_lane_reg,
-		     ((DP_AUX_DIN_SEL | DP_AUX_DOUT_SEL | DP_LANE_SEL_ALL) << 16) |
-		     FIELD_PREP(DP_AUX_DIN_SEL, udphy->dp_aux_din_sel) |
-		     FIELD_PREP(DP_AUX_DOUT_SEL, udphy->dp_aux_dout_sel) | value);
+	regmap_write(udphy->vogrf, cfg->vogrfcfg[udphy->id].dp_lane_reg, value);
 }
 
 static void rk_udphy_dp_lane_enable(struct rk_udphy *udphy, int dp_lanes)

-- 
2.53.0

[PATCH v4 11/16] phy: rockchip: usbdp: Register DP aux bridge

[Sebastian Reichel]

Add support to use USB-C connectors with the DP altmode helper code on
devicetree based platforms. To get this working there must be a DRM
bridge chain from the DisplayPort controller to the USB-C connector.
E.g. on Rockchip RK3576:

root@rk3576 # cat /sys/kernel/debug/dri/0/encoder-0/bridges
bridge[0]: dw_dp_bridge_funcs
        refcount: 7
        type: [10] DP
        OF: /soc/dp@27e40000:rockchip,rk3576-dp
        ops: [0x47] detect edid hpd
bridge[1]: drm_aux_bridge_funcs
        refcount: 4
        type: [0] Unknown
        OF: /soc/phy@2b010000:rockchip,rk3576-usbdp-phy
        ops: [0x0]
bridge[2]: drm_aux_hpd_bridge_funcs
        refcount: 5
        type: [10] DP
        OF: /soc/i2c@2ac50000/typec-portc@22/connector:usb-c-connector
        ops: [0x4] hpd

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/Kconfig              |  2 ++
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 14 ++++++++++++++
 2 files changed, 16 insertions(+)

diff --git a/drivers/phy/rockchip/Kconfig b/drivers/phy/rockchip/Kconfig
index 14698571b607..39759bb2fa1d 100644
--- a/drivers/phy/rockchip/Kconfig
+++ b/drivers/phy/rockchip/Kconfig
@@ -136,8 +136,10 @@ config PHY_ROCKCHIP_USBDP
 	tristate "Rockchip USBDP COMBO PHY Driver"
 	depends on ARCH_ROCKCHIP && OF
 	depends on TYPEC
+	depends on DRM || DRM=n
 	select GENERIC_PHY
 	select USB_COMMON
+	select DRM_AUX_BRIDGE if DRM_BRIDGE
 	help
 	  Enable this to support the Rockchip USB3.0/DP combo PHY with
 	  Samsung IP block. This is required for USB3 support on RK3588.
diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index beab20e4c512..77ad2a89d4f2 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -6,6 +6,7 @@
  * Copyright (C) 2024 Collabora Ltd
  */
 
+#include <drm/bridge/aux-bridge.h>
 #include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
@@ -1434,6 +1435,7 @@ static int rk_udphy_probe(struct platform_device *pdev)
 {
 	struct device *dev = &pdev->dev;
 	struct phy_provider *phy_provider;
+	struct fwnode_handle *dp_aux_ep;
 	struct resource *res;
 	struct rk_udphy *udphy;
 	void __iomem *base;
@@ -1492,6 +1494,18 @@ static int rk_udphy_probe(struct platform_device *pdev)
 			return ret;
 	}
 
+	/*
+	 * Only register the DRM bridge, if the DP aux channel is connected.
+	 * Some boards use the USBDP PHY only for its USB3 capabilities.
+	 */
+	dp_aux_ep = fwnode_graph_get_endpoint_by_id(dev_fwnode(dev), 3, 0, 0);
+	if (dp_aux_ep) {
+		ret = drm_aux_bridge_register(dev);
+		fwnode_handle_put(dp_aux_ep);
+		if (ret)
+			return ret;
+	}
+
 	udphy->phy_u3 = devm_phy_create(dev, dev->of_node, &rk_udphy_usb3_phy_ops);
 	if (IS_ERR(udphy->phy_u3)) {
 		ret = PTR_ERR(udphy->phy_u3);

-- 
2.53.0

[PATCH v4 12/16] phy: rockchip: usbdp: Drop DP HPD handling

[Sebastian Reichel]

Drop the HPD handling logic from the USBDP PHY. The registers involved
require the display controller power domain being enabled and thus the
HPD signal should be handled by the displayport controller itself.
Apart from that the HPD handling as it is done here is incorrect and
misses hotplug events happening after the USB-C connector (e.g. when
a USB-C to HDMI adapter is involved and the HDMI cable is replugged).

Proper USB-C DP HPD support requires some restructuring of the DP
controller driver, which will happen independent of this patch. The
mainline kernel does not yet support USB-C DP AltMode on RK3588 and
RK3576, so it is fine to drop this code without adding the counterpart
in the DRM in an atomic change.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 47 +------------------------------
 1 file changed, 1 insertion(+), 46 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 77ad2a89d4f2..3f1233f50686 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -186,8 +186,6 @@ struct rk_udphy {
 	u32 dp_lane_sel[4];
 	u32 dp_aux_dout_sel;
 	u32 dp_aux_din_sel;
-	bool dp_sink_hpd_sel;
-	bool dp_sink_hpd_cfg;
 	unsigned int link_rate;
 	unsigned int lanes;
 	u8 bw;
@@ -579,19 +577,6 @@ static void rk_udphy_dp_lane_enable(struct rk_udphy *udphy, int dp_lanes)
 				   CMN_DP_CMN_RSTN, FIELD_PREP(CMN_DP_CMN_RSTN, 0x0));
 }
 
-static void rk_udphy_dp_hpd_event_trigger(struct rk_udphy *udphy, bool hpd)
-{
-	const struct rk_udphy_cfg *cfg = udphy->cfgs;
-
-	udphy->dp_sink_hpd_sel = true;
-	udphy->dp_sink_hpd_cfg = hpd;
-
-	if (!udphy->dp_in_use)
-		return;
-
-	rk_udphy_grfreg_write(udphy->vogrf, &cfg->vogrfcfg[udphy->id].hpd_trigger, hpd);
-}
-
 static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
 {
 	if (udphy->mode == mode)
@@ -1360,22 +1345,7 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 		break;
 	}
 
-	if (state->alt && state->alt->svid == USB_TYPEC_DP_SID) {
-		struct typec_displayport_data *data = state->data;
-
-		if (!data) {
-			rk_udphy_dp_hpd_event_trigger(udphy, false);
-		} else if (data->status & DP_STATUS_IRQ_HPD) {
-			rk_udphy_dp_hpd_event_trigger(udphy, false);
-			usleep_range(750, 800);
-			rk_udphy_dp_hpd_event_trigger(udphy, true);
-		} else if (data->status & DP_STATUS_HPD_STATE) {
-			rk_udphy_mode_set(udphy, mode);
-			rk_udphy_dp_hpd_event_trigger(udphy, true);
-		} else {
-			rk_udphy_dp_hpd_event_trigger(udphy, false);
-		}
-	}
+	rk_udphy_mode_set(udphy, mode);
 
 	mutex_unlock(&udphy->mutex);
 	return 0;
@@ -1531,20 +1501,6 @@ static int rk_udphy_probe(struct platform_device *pdev)
 	return 0;
 }
 
-static int __maybe_unused rk_udphy_resume(struct device *dev)
-{
-	struct rk_udphy *udphy = dev_get_drvdata(dev);
-
-	if (udphy->dp_sink_hpd_sel)
-		rk_udphy_dp_hpd_event_trigger(udphy, udphy->dp_sink_hpd_cfg);
-
-	return 0;
-}
-
-static const struct dev_pm_ops rk_udphy_pm_ops = {
-	SET_LATE_SYSTEM_SLEEP_PM_OPS(NULL, rk_udphy_resume)
-};
-
 static const char * const rk_udphy_rst_list[] = {
 	"init", "cmn", "lane", "pcs_apb", "pma_apb"
 };
@@ -1649,7 +1605,6 @@ static struct platform_driver rk_udphy_driver = {
 	.driver		= {
 		.name	= "rockchip-usbdp-phy",
 		.of_match_table = rk_udphy_dt_match,
-		.pm = &rk_udphy_pm_ops,
 	},
 };
 module_platform_driver(rk_udphy_driver);

-- 
2.53.0

[PATCH v4 13/16] phy: rockchip: usbdp: Rename mode_change to phy_needs_reinit

[Sebastian Reichel]

Right now the mode_change property is set whenever the mode changes
between USB-only, DP-only and USB-DP. It is needed, because on any
mode change the PHY needs to be re-initialized. Apparently at least
DP also requires a re-init when the cable orientation is changed,
which is currently not being done (except when the orientation switch
also involves a mode change). Prepare for this by renaming mode_change
to phy_needs_reinit.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 10 +++++-----
 1 file changed, 5 insertions(+), 5 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 3f1233f50686..694832cc161e 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -172,7 +172,7 @@ struct rk_udphy {
 
 	/* PHY status management */
 	bool flip;
-	bool mode_change;
+	bool phy_needs_reinit;
 	u8 mode;
 	u8 status;
 
@@ -582,7 +582,7 @@ static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
 	if (udphy->mode == mode)
 		return;
 
-	udphy->mode_change = true;
+	udphy->phy_needs_reinit = true;
 	udphy->mode = mode;
 }
 
@@ -970,15 +970,15 @@ static int rk_udphy_power_on(struct rk_udphy *udphy, u8 mode)
 	}
 
 	if (udphy->status == UDPHY_MODE_NONE) {
-		udphy->mode_change = false;
+		udphy->phy_needs_reinit = false;
 		ret = rk_udphy_setup(udphy);
 		if (ret)
 			return ret;
 
 		if (udphy->mode & UDPHY_MODE_USB)
 			rk_udphy_u3_port_disable(udphy, false);
-	} else if (udphy->mode_change) {
-		udphy->mode_change = false;
+	} else if (udphy->phy_needs_reinit) {
+		udphy->phy_needs_reinit = false;
 		if (udphy->mode == UDPHY_MODE_DP)
 			rk_udphy_u3_port_disable(udphy, true);
 

-- 
2.53.0

[PATCH v4 14/16] phy: rockchip: usbdp: Re-init the PHY on orientation change

[Sebastian Reichel]

Changing the cable orientation reconfigures the lane muxing, which
requires re-initializing the PHY. Without this DP functionality
breaks, if the cable is re-plugged with swapped orientation.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 694832cc161e..80fe5993c6c7 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -624,6 +624,7 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 				 enum typec_orientation orien)
 {
 	struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
+	bool flipped = orien == TYPEC_ORIENTATION_REVERSE;
 
 	mutex_lock(&udphy->mutex);
 
@@ -635,7 +636,10 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 		goto unlock_ret;
 	}
 
-	udphy->flip = orien == TYPEC_ORIENTATION_REVERSE;
+	if (udphy->flip != flipped)
+		udphy->phy_needs_reinit = true;
+
+	udphy->flip = flipped;
 	rk_udphy_set_typec_default_mapping(udphy);
 	rk_udphy_usb_bvalid_enable(udphy, true);
 

-- 
2.53.0

[PATCH v4 15/16] phy: rockchip: usbdp: Factor out lane_mux_sel setup

[Sebastian Reichel]

Avoid describing the USB+DP lane_mux_sel logic twice by introducing
a helper function to reduce code duplication.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 81 +++++++++++++++----------------
 1 file changed, 40 insertions(+), 41 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 80fe5993c6c7..17637d92cf9b 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -586,6 +586,42 @@ static void rk_udphy_mode_set(struct rk_udphy *udphy, u8 mode)
 	udphy->mode = mode;
 }
 
+static void rk_udphy_set_typec_state(struct rk_udphy *udphy, unsigned long state)
+{
+	u8 mode;
+
+	switch (state) {
+	case TYPEC_DP_STATE_C:
+	case TYPEC_DP_STATE_E:
+		udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+		mode = UDPHY_MODE_DP;
+		udphy->dp_lanes = 4;
+		break;
+
+	case TYPEC_DP_STATE_D:
+	default:
+		if (udphy->flip) {
+			udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
+			udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
+			udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
+			udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
+		} else {
+			udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
+			udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
+			udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
+			udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
+		}
+		mode = UDPHY_MODE_DP_USB;
+		udphy->dp_lanes = 2;
+		break;
+	}
+
+	rk_udphy_mode_set(udphy, mode);
+}
+
 static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 {
 	if (udphy->flip) {
@@ -593,10 +629,6 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 		udphy->dp_lane_sel[1] = 1;
 		udphy->dp_lane_sel[2] = 3;
 		udphy->dp_lane_sel[3] = 2;
-		udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
-		udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
-		udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
-		udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
 		udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_INVERT;
 		udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_INVERT;
 		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 1);
@@ -606,18 +638,14 @@ static void rk_udphy_set_typec_default_mapping(struct rk_udphy *udphy)
 		udphy->dp_lane_sel[1] = 3;
 		udphy->dp_lane_sel[2] = 1;
 		udphy->dp_lane_sel[3] = 0;
-		udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
-		udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
-		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
-		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
 		udphy->dp_aux_dout_sel = PHY_AUX_DP_DATA_POL_NORMAL;
 		udphy->dp_aux_din_sel = PHY_AUX_DP_DATA_POL_NORMAL;
 		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
 		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 1);
 	}
 
-	rk_udphy_mode_set(udphy, UDPHY_MODE_DP_USB);
-	udphy->dp_lanes = 2;
+	/* default to USB3 + DP as 4 lane USB is not supported */
+	rk_udphy_set_typec_state(udphy, TYPEC_DP_STATE_D);
 }
 
 static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
@@ -1316,42 +1344,13 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 				  struct typec_mux_state *state)
 {
 	struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
-	u8 mode;
 
 	mutex_lock(&udphy->mutex);
 
-	switch (state->mode) {
-	case TYPEC_DP_STATE_C:
-	case TYPEC_DP_STATE_E:
-		udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
-		udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
-		udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
-		udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
-		mode = UDPHY_MODE_DP;
-		udphy->dp_lanes = 4;
-		break;
-
-	case TYPEC_DP_STATE_D:
-	default:
-		if (udphy->flip) {
-			udphy->lane_mux_sel[0] = PHY_LANE_MUX_DP;
-			udphy->lane_mux_sel[1] = PHY_LANE_MUX_DP;
-			udphy->lane_mux_sel[2] = PHY_LANE_MUX_USB;
-			udphy->lane_mux_sel[3] = PHY_LANE_MUX_USB;
-		} else {
-			udphy->lane_mux_sel[0] = PHY_LANE_MUX_USB;
-			udphy->lane_mux_sel[1] = PHY_LANE_MUX_USB;
-			udphy->lane_mux_sel[2] = PHY_LANE_MUX_DP;
-			udphy->lane_mux_sel[3] = PHY_LANE_MUX_DP;
-		}
-		mode = UDPHY_MODE_DP_USB;
-		udphy->dp_lanes = 2;
-		break;
-	}
-
-	rk_udphy_mode_set(udphy, mode);
+	rk_udphy_set_typec_state(udphy, state->mode);
 
 	mutex_unlock(&udphy->mutex);
+
 	return 0;
 }
 

-- 
2.53.0

[PATCH v4 16/16] phy: rockchip: usbdp: Use guard functions for mutex

[Sebastian Reichel]

Convert the driver to use guard functions for mutex handling as
a small cleanup. There is a small functional change in the DP PHY
power up function, which no longer sleeps if the internal powerup
code returns an error. This is not a problem as the sleep is only
relevant for successful power-up.

Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
---
 drivers/phy/rockchip/phy-rockchip-usbdp.c | 60 ++++++++++++++-----------------
 1 file changed, 27 insertions(+), 33 deletions(-)

diff --git a/drivers/phy/rockchip/phy-rockchip-usbdp.c b/drivers/phy/rockchip/phy-rockchip-usbdp.c
index 17637d92cf9b..f318b04c097d 100644
--- a/drivers/phy/rockchip/phy-rockchip-usbdp.c
+++ b/drivers/phy/rockchip/phy-rockchip-usbdp.c
@@ -10,6 +10,7 @@
 #include <dt-bindings/phy/phy.h>
 #include <linux/bitfield.h>
 #include <linux/bits.h>
+#include <linux/cleanup.h>
 #include <linux/clk.h>
 #include <linux/delay.h>
 #include <linux/gpio.h>
@@ -654,14 +655,15 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 	struct rk_udphy *udphy = typec_switch_get_drvdata(sw);
 	bool flipped = orien == TYPEC_ORIENTATION_REVERSE;
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
 
 	if (orien == TYPEC_ORIENTATION_NONE) {
 		gpiod_set_value_cansleep(udphy->sbu1_dc_gpio, 0);
 		gpiod_set_value_cansleep(udphy->sbu2_dc_gpio, 0);
 		/* unattached */
 		rk_udphy_usb_bvalid_enable(udphy, false);
-		goto unlock_ret;
+
+		return 0;
 	}
 
 	if (udphy->flip != flipped)
@@ -671,8 +673,6 @@ static int rk_udphy_orien_sw_set(struct typec_switch_dev *sw,
 	rk_udphy_set_typec_default_mapping(udphy);
 	rk_udphy_usb_bvalid_enable(udphy, true);
 
-unlock_ret:
-	mutex_unlock(&udphy->mutex);
 	return 0;
 }
 
@@ -1044,12 +1044,10 @@ static int rk_udphy_dp_phy_init(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
 
 	udphy->dp_in_use = true;
 
-	mutex_unlock(&udphy->mutex);
-
 	return 0;
 }
 
@@ -1057,9 +1055,10 @@ static int rk_udphy_dp_phy_exit(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
+
 	udphy->dp_in_use = false;
-	mutex_unlock(&udphy->mutex);
+
 	return 0;
 }
 
@@ -1068,26 +1067,25 @@ static int rk_udphy_dp_phy_power_on(struct phy *phy)
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 	int ret;
 
-	mutex_lock(&udphy->mutex);
+	scoped_guard(mutex, &udphy->mutex) {
+		phy_set_bus_width(phy, udphy->dp_lanes);
 
-	phy_set_bus_width(phy, udphy->dp_lanes);
-
-	ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
-	if (ret)
-		goto unlock;
+		ret = rk_udphy_power_on(udphy, UDPHY_MODE_DP);
+		if (ret)
+			return ret;
 
-	rk_udphy_dp_lane_enable(udphy, udphy->dp_lanes);
+		rk_udphy_dp_lane_enable(udphy, udphy->dp_lanes);
 
-	rk_udphy_dp_lane_select(udphy);
+		rk_udphy_dp_lane_select(udphy);
+	}
 
-unlock:
-	mutex_unlock(&udphy->mutex);
 	/*
 	 * If data send by aux channel too fast after phy power on,
 	 * the aux may be not ready which will cause aux error. Adding
 	 * delay to avoid this issue.
 	 */
 	usleep_range(10000, 11000);
+
 	return ret;
 }
 
@@ -1095,10 +1093,10 @@ static int rk_udphy_dp_phy_power_off(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
+
 	rk_udphy_dp_lane_enable(udphy, 0);
 	rk_udphy_power_off(udphy, UDPHY_MODE_DP);
-	mutex_unlock(&udphy->mutex);
 
 	return 0;
 }
@@ -1302,19 +1300,18 @@ static const struct phy_ops rk_udphy_dp_phy_ops = {
 static int rk_udphy_usb3_phy_init(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
-	int ret = 0;
+	int ret;
+
+	guard(mutex)(&udphy->mutex);
 
-	mutex_lock(&udphy->mutex);
 	/* DP only or high-speed, disable U3 port */
 	if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs) {
 		rk_udphy_u3_port_disable(udphy, true);
-		goto unlock;
+		return 0;
 	}
 
 	ret = rk_udphy_power_on(udphy, UDPHY_MODE_USB);
 
-unlock:
-	mutex_unlock(&udphy->mutex);
 	return ret;
 }
 
@@ -1322,15 +1319,14 @@ static int rk_udphy_usb3_phy_exit(struct phy *phy)
 {
 	struct rk_udphy *udphy = phy_get_drvdata(phy);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
+
 	/* DP only or high-speed */
 	if (!(udphy->mode & UDPHY_MODE_USB) || udphy->hs)
-		goto unlock;
+		return 0;
 
 	rk_udphy_power_off(udphy, UDPHY_MODE_USB);
 
-unlock:
-	mutex_unlock(&udphy->mutex);
 	return 0;
 }
 
@@ -1345,12 +1341,10 @@ static int rk_udphy_typec_mux_set(struct typec_mux_dev *mux,
 {
 	struct rk_udphy *udphy = typec_mux_get_drvdata(mux);
 
-	mutex_lock(&udphy->mutex);
+	guard(mutex)(&udphy->mutex);
 
 	rk_udphy_set_typec_state(udphy, state->mode);
 
-	mutex_unlock(&udphy->mutex);
-
 	return 0;
 }
 

-- 
2.53.0

Re: [PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups

[Vinod Koul]

Hi Sebastian,

On 28-04-26, 18:13, Sebastian Reichel wrote:
> This series overhauls the Rockchip USBDP driver; apart from a
> a bunch of cleanups and small improvements the main goal is to
> get the driver ready for proper USB-C DP AltMode support.
> 
> Once this series has landed, it unblocks enabling proper USB-C
> DP AltMode on the RK3588 and RK3576 platforms incl. runtime PM
> for the Synopsys DesignWare DisplayPort controller.
> 
> Apart from this series, further changes are required on the
> DRM side. There are no compile-time dependencies between the
> DRM side and the PHY side, but the PHY side must be applied
> to avoid SErrors once runtime PM is added to the DisplayPort
> controller driver. Thus it would be really good to land this
> series in the next merge window.

Looks like sasiko has flagged 8 high warning, can you please check them

-- 
~Vinod

Re: [PATCH v4 00/16] phy: rockchip: usbdp: Fixes, DP 1-lane support and cleanups

[Heiko Stuebner]

Hi Vinod,

Am Sonntag, 3. Mai 2026, 18:50:12 Mitteleuropäische Sommerzeit schrieb Vinod Koul:
> Hi Sebastian,
> 
> On 28-04-26, 18:13, Sebastian Reichel wrote:
> > This series overhauls the Rockchip USBDP driver; apart from a
> > a bunch of cleanups and small improvements the main goal is to
> > get the driver ready for proper USB-C DP AltMode support.
> > 
> > Once this series has landed, it unblocks enabling proper USB-C
> > DP AltMode on the RK3588 and RK3576 platforms incl. runtime PM
> > for the Synopsys DesignWare DisplayPort controller.
> > 
> > Apart from this series, further changes are required on the
> > DRM side. There are no compile-time dependencies between the
> > DRM side and the PHY side, but the PHY side must be applied
> > to avoid SErrors once runtime PM is added to the DisplayPort
> > controller driver. Thus it would be really good to land this
> > series in the next merge window.
> 
> Looks like sasiko has flagged 8 high warning, can you please check them

(1) as mentioned in a different patch thread, review should be happening
on the lists. Tools regularly dump old results, so anyone looking at the
mailinglist thread might now be able to follow along with what happened
in 2 months or so.

Also other robot tools can reply on the lists just fine.


(2) if 1. is so hugely impossible, please at least provide some reference
to what you mean. Not everybody knows all the hype-tools-of-the-week and
simply searching for that mysterious "sasiko" [0] did not provide any
meaningful results for me, despite some amazon or youtube links for some
non-kernel uses of that term ;-)

So a link should be present at least please.


Thanks
Heiko


[0] https://duckduckgo.com/?q=%22sasiko%22

Re: [PATCH v4 01/16] dt-bindings: phy: rockchip-usbdp: add improved ports scheme

[Rob Herring]

On Tue, Apr 28, 2026 at 06:13:40PM +0200, Sebastian Reichel wrote:
> Currently the Rockchip USBDP PHY is missing a documented port scheme.
> Meanwhile upstream RK3588 DTS files are a bit messy and use different
> port schemes. The upstream USBDP PHY Linux kernel driver does not yet
> parse the ports at all and thus does not create any implicit ABI either.
> 
> But with the current mess it is not possible to properly support USB-C
> DP AltMode. Thus this introduces a proper port scheme following roughly
> the ports design of the Qualcomm QMP USB4-USB3-DP PHY controller binding
> with a slight difference that there is an additional port for the
> USB-C SBU port as the Rockchip USB-DP PHY also contains the SBU mux.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>

Missing my tag.

> ---
>  .../bindings/phy/phy-rockchip-usbdp.yaml           | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 
> diff --git a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> index 8b7059d5b182..f728acf057e4 100644
> --- a/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> +++ b/Documentation/devicetree/bindings/phy/phy-rockchip-usbdp.yaml
> @@ -114,6 +114,29 @@ properties:
>        A port node to link the PHY to a TypeC controller for the purpose of
>        handling orientation switching.
>  
> +  ports:
> +    $ref: /schemas/graph.yaml#/properties/ports
> +    properties:
> +      port@0:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of the PHY for USB (or DP when configured into 4 lane
> +          mode), which should point to the superspeed port of a USB connector.
> +
> +      port@1:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Incoming endpoint from the USB controller
> +
> +      port@2:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description: Incoming endpoint from the DisplayPort controller
> +
> +      port@3:
> +        $ref: /schemas/graph.yaml#/properties/port
> +        description:
> +          Output endpoint of the PHY for DP, which should either point to the
> +          SBU port of a USB-C connector or a DisplayPort connector input port.
> +
>  required:
>    - compatible
>    - reg
> 
> -- 
> 2.53.0
> 

Re: [PATCH v4 01/16] dt-bindings: phy: rockchip-usbdp: add improved ports scheme

[Rob Herring (Arm)]

On Tue, 28 Apr 2026 18:13:40 +0200, Sebastian Reichel wrote:
> Currently the Rockchip USBDP PHY is missing a documented port scheme.
> Meanwhile upstream RK3588 DTS files are a bit messy and use different
> port schemes. The upstream USBDP PHY Linux kernel driver does not yet
> parse the ports at all and thus does not create any implicit ABI either.
> 
> But with the current mess it is not possible to properly support USB-C
> DP AltMode. Thus this introduces a proper port scheme following roughly
> the ports design of the Qualcomm QMP USB4-USB3-DP PHY controller binding
> with a slight difference that there is an additional port for the
> USB-C SBU port as the Rockchip USB-DP PHY also contains the SBU mux.
> 
> Signed-off-by: Sebastian Reichel <sebastian.reichel@collabora.com>
> ---
>  .../bindings/phy/phy-rockchip-usbdp.yaml           | 23 ++++++++++++++++++++++
>  1 file changed, 23 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>