[PATCH RFC 0/6] Speakers for Pixel 3 / 3 XL

[PATCH RFC 0/6] Speakers for Pixel 3 / 3 XL

[David Heidelberg via B4 Relay]

This series address:

0. demistify the hex to BIT() macro and add left/right rx spk
1. most likely wrongly set DSP_B in sdm845.c
   my guess this is because TDM was never used in the mainline with
   sdm845
2. applying correct mask to left/right speaker for the TDM in sdm845.c,
   so both speakers can work simultaneusly
3. setting sysclk at startups, which some codecs need (such as cs35l36)
4. setting proper tdm slot in the cs35l36 driver
5. device-tree wiring for Pixel 3 / 3 XL

Consider my knowledge here limited, thus sending RFC. Some parts we're
heavily assisted by LLM - I believe I understand what I'm doing, but
my knowledge within audio realm is limited.

David

Signed-off-by: David Heidelberg <david@ixit.cz>
---
David Heidelberg (6):
      ASoC: qcom: sdm845: Demystify TDM masks a bit
      ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs
      ASoC: qcom: sdm845: Use per-speaker RX masks for TDM slot assignment
      ASoC: qcom: sdm845: Set codec dai and component sysclk during startup
      ASoC: cs35l36: Implement set_tdm_slot to program RX slot register
      arm64: dts: qcom: sdm845-google: Add basic audio support

 arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 133 ++++++++++++++++++++-
 sound/soc/codecs/cs35l36.c                         |  16 +++
 sound/soc/qcom/sdm845.c                            |  46 +++++--
 3 files changed, 183 insertions(+), 12 deletions(-)
---
base-commit: 2b763db0c2763d6bf73d7d3e69665222d1f377cf
change-id: 20260613-pixel3-audio-bdbfb49e8037

Best regards,
-- 
David Heidelberg <david@ixit.cz>

[PATCH RFC 1/6] ASoC: qcom: sdm845: Demystify TDM masks a bit

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Describe the mask with the bits used for each RX/TX.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/qcom/sdm845.c | 18 +++++++++++-------
 1 file changed, 11 insertions(+), 7 deletions(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 0ce9dff4dc525..edd2cc7a1c74f 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -18,19 +18,21 @@
 #include "sdw.h"
 #include "../codecs/rt5663.h"
 
 #define DRIVER_NAME	"sdm845"
 #define DEFAULT_SAMPLE_RATE_48K		48000
 #define DEFAULT_MCLK_RATE		24576000
 #define TDM_BCLK_RATE		6144000
 #define MI2S_BCLK_RATE		1536000
-#define LEFT_SPK_TDM_TX_MASK    0x30
-#define RIGHT_SPK_TDM_TX_MASK   0xC0
-#define SPK_TDM_RX_MASK         0x03
+#define LEFT_SPK_TDM_RX_MASK	BIT(0)
+#define RIGHT_SPK_TDM_RX_MASK	BIT(1)
+#define SPK_TDM_RX_MASK		(LEFT_SPK_TDM_RX_MASK | RIGHT_SPK_TDM_RX_MASK)
+#define LEFT_SPK_TDM_TX_MASK	(BIT(4) | BIT(5))
+#define RIGHT_SPK_TDM_TX_MASK	(BIT(6) | BIT(7))
 #define NUM_TDM_SLOTS           8
 #define SLIM_MAX_TX_PORTS 16
 #define SLIM_MAX_RX_PORTS 13
 #define WCD934X_DEFAULT_MCLK_RATE	9600000
 
 struct sdm845_snd_data {
 	struct snd_soc_jack jack;
 	bool jack_setup;
@@ -108,34 +110,36 @@ static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream,
 	default:
 		dev_err(rtd->dev, "%s: invalid param format 0x%x\n",
 				__func__, params_format(params));
 		return -EINVAL;
 	}
 
 	channels = params_channels(params);
 	if (substream->stream == SNDRV_PCM_STREAM_PLAYBACK) {
-		ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, 0x3,
-				8, slot_width);
+		ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0, SPK_TDM_RX_MASK,
+					       NUM_TDM_SLOTS, slot_width);
 		if (ret < 0) {
 			dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n",
 					__func__, ret);
 			goto end;
 		}
 
 		ret = snd_soc_dai_set_channel_map(cpu_dai, 0, NULL,
 				channels, tdm_slot_offset);
 		if (ret < 0) {
 			dev_err(rtd->dev, "%s: failed to set channel map, err:%d\n",
 					__func__, ret);
 			goto end;
 		}
 	} else {
-		ret = snd_soc_dai_set_tdm_slot(cpu_dai, 0xf, 0,
-				8, slot_width);
+		ret = snd_soc_dai_set_tdm_slot(cpu_dai,
+					       SPK_TDM_RX_MASK | BIT(2) |
+					       BIT(3), 0,
+					       NUM_TDM_SLOTS, slot_width);
 		if (ret < 0) {
 			dev_err(rtd->dev, "%s: failed to set tdm slot, err:%d\n",
 					__func__, ret);
 			goto end;
 		}
 
 		ret = snd_soc_dai_set_channel_map(cpu_dai, channels,
 				tdm_slot_offset, 0, NULL);

-- 
2.53.0

[PATCH RFC 2/6] ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Before the DSP_B only worked because the only close-to-mainline consumer
cs35l36 codec was patched to map both DSP_A and DSP_B to the same
hardware register value (asp_fmt = 0), which is inherently DSP_A timing.
Use the right codec (DSP_A) which works as expected.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/qcom/sdm845.c | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index edd2cc7a1c74f..9de3282bda4be 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -380,17 +380,17 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
 	case QUATERNARY_TDM_RX_0:
 	case QUATERNARY_TDM_TX_0:
 		if (++(data->quat_tdm_clk_count) == 1) {
 			snd_soc_dai_set_sysclk(cpu_dai,
 				Q6AFE_LPASS_CLK_ID_QUAD_TDM_IBIT,
 				TDM_BCLK_RATE, SNDRV_PCM_STREAM_PLAYBACK);
 		}
 
-		codec_dai_fmt |= SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_DSP_B;
+		codec_dai_fmt |= SND_SOC_DAIFMT_IB_NF | SND_SOC_DAIFMT_DSP_A;
 
 		for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 			if (!strcmp(codec_dai->component->name_prefix,
 				    "Left")) {
 				ret = snd_soc_dai_set_fmt(
 						codec_dai, codec_dai_fmt);
 				if (ret < 0) {

-- 
2.53.0

Re: [PATCH RFC 2/6] ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs

[Konrad Dybcio]

On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Before the DSP_B only worked because the only close-to-mainline consumer
> cs35l36 codec was patched to map both DSP_A and DSP_B to the same
> hardware register value (asp_fmt = 0), which is inherently DSP_A timing.
> Use the right codec (DSP_A) which works as expected.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---

Fixes?

Konrad

Re: [PATCH RFC 2/6] ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs

[David Heidelberg]

On 06/07/2026 10:33, Konrad Dybcio wrote:
> On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
>> From: David Heidelberg <david@ixit.cz>
>>
>> Before the DSP_B only worked because the only close-to-mainline consumer
>> cs35l36 codec was patched to map both DSP_A and DSP_B to the same
>> hardware register value (asp_fmt = 0), which is inherently DSP_A timing.
>> Use the right codec (DSP_A) which works as expected.
>>
>> Signed-off-by: David Heidelberg <david@ixit.cz>
>> ---
> 
> Fixes?
> 

I was thinking about it, but I don't see any mainline consumer of TDM within the 
sdm845 arch.

If you think it make sense, I'll mark it.

David

> Konrad

Re: [PATCH RFC 2/6] ASoC: qcom: sdm845: use DSP_A format for TDM codec DAIs

[Konrad Dybcio]

On 7/6/26 11:15 AM, David Heidelberg wrote:
> On 06/07/2026 10:33, Konrad Dybcio wrote:
>> On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
>>> From: David Heidelberg <david@ixit.cz>
>>>
>>> Before the DSP_B only worked because the only close-to-mainline consumer
>>> cs35l36 codec was patched to map both DSP_A and DSP_B to the same
>>> hardware register value (asp_fmt = 0), which is inherently DSP_A timing.
>>> Use the right codec (DSP_A) which works as expected.
>>>
>>> Signed-off-by: David Heidelberg <david@ixit.cz>
>>> ---
>>
>> Fixes?
>>
> 
> I was thinking about it, but I don't see any mainline consumer of TDM within the sdm845 arch.
> 
> If you think it make sense, I'll mark it.

I personally think Fixes makes sense whenever the code is fixed,
not only if there's a user-visible bug. Up to you.

Konrad

[PATCH RFC 3/6] ASoC: qcom: sdm845: Use per-speaker RX masks for TDM slot assignment

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Both Left and Right codec DAIs were passing the same SPK_TDM_RX_MASK,
both speakers ended up on slot 0, breaking the one speaker in
configuration such as on Pixel 3.

Split SPK_TDM_RX_MASK into per-speaker masks so that the Left codec
gets slot 0 (rx_mask=0x01) and the Right codec gets slot 1
(rx_mask=0x02).

This commit is here, so later CS35L36 receives correct slot for right
and left speakers.

Assisted-by: Claude:claude-4.6-opus
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/qcom/sdm845.c | 4 ++--
 1 file changed, 2 insertions(+), 2 deletions(-)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 9de3282bda4be..8b65aa3982d47 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -150,29 +150,29 @@ static int sdm845_tdm_snd_hw_params(struct snd_pcm_substream *substream,
 		}
 	}
 
 	for_each_rtd_codec_dais(rtd, j, codec_dai) {
 
 		if (!strcmp(codec_dai->component->name_prefix, "Left")) {
 			ret = snd_soc_dai_set_tdm_slot(
 					codec_dai, LEFT_SPK_TDM_TX_MASK,
-					SPK_TDM_RX_MASK, NUM_TDM_SLOTS,
+					LEFT_SPK_TDM_RX_MASK, NUM_TDM_SLOTS,
 					slot_width);
 			if (ret < 0) {
 				dev_err(rtd->dev,
 					"DEV0 TDM slot err:%d\n", ret);
 				return ret;
 			}
 		}
 
 		if (!strcmp(codec_dai->component->name_prefix, "Right")) {
 			ret = snd_soc_dai_set_tdm_slot(
 					codec_dai, RIGHT_SPK_TDM_TX_MASK,
-					SPK_TDM_RX_MASK, NUM_TDM_SLOTS,
+					RIGHT_SPK_TDM_RX_MASK, NUM_TDM_SLOTS,
 					slot_width);
 			if (ret < 0) {
 				dev_err(rtd->dev,
 					"DEV1 TDM slot err:%d\n", ret);
 				return ret;
 			}
 		}
 	}

-- 
2.53.0

[PATCH RFC 4/6] ASoC: qcom: sdm845: Set codec dai and component sysclk during startup

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

The cs35l36 codec needs the codec dai and component sysclk to be set
during TDM startup. Set these for all codec DAIs on the QUATERNARY_TDM
path, gracefully handling codecs that don't support sysclk by ignoring
-ENOTSUPP returns.

Based on work of Joel Selvaraj.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/qcom/sdm845.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/sound/soc/qcom/sdm845.c b/sound/soc/qcom/sdm845.c
index 8b65aa3982d47..b2d51e472bc26 100644
--- a/sound/soc/qcom/sdm845.c
+++ b/sound/soc/qcom/sdm845.c
@@ -405,16 +405,38 @@ static int sdm845_snd_startup(struct snd_pcm_substream *substream)
 				ret = snd_soc_dai_set_fmt(
 						codec_dai, codec_dai_fmt);
 				if (ret < 0) {
 					dev_err(rtd->dev,
 						"Right TDM slot err:%d\n", ret);
 					return ret;
 				}
 			}
+
+			/* Set codec sysclk needed by codecs like cs35l36. */
+			ret = snd_soc_dai_set_sysclk(codec_dai, 0,
+						     TDM_BCLK_RATE,
+						     SND_SOC_CLOCK_IN);
+			if (ret < 0 && ret != -ENOTSUPP) {
+				dev_err(codec_dai->dev,
+					"Failed to set codec dai sysclk: %d\n",
+					ret);
+				return ret;
+			}
+
+			ret = snd_soc_component_set_sysclk(codec_dai->component,
+							   0, 0,
+							   TDM_BCLK_RATE,
+							   SND_SOC_CLOCK_IN);
+			if (ret < 0 && ret != -ENOTSUPP) {
+				dev_err(codec_dai->dev,
+					"Failed to set codec component sysclk: %d\n",
+					ret);
+				return ret;
+			}
 		}
 		break;
 	case SLIMBUS_0_RX...SLIMBUS_6_TX:
 		break;
 
 	default:
 		pr_err("%s: invalid dai id 0x%x\n", __func__, cpu_dai->id);
 		break;

-- 
2.53.0

[PATCH RFC 5/6] ASoC: cs35l36: Implement set_tdm_slot to program RX slot register

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Program ASP_RX1_SLOT with the first set bit of rx_mask so the
amplifier listens on the correct TDM slot when configured by
machine drivers.

Assisted-by: Claude:claude-4.6-opus
Signed-off-by: David Heidelberg <david@ixit.cz>
---
 sound/soc/codecs/cs35l36.c | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/sound/soc/codecs/cs35l36.c b/sound/soc/codecs/cs35l36.c
index 89645327945f1..944f4cb5763e4 100644
--- a/sound/soc/codecs/cs35l36.c
+++ b/sound/soc/codecs/cs35l36.c
@@ -942,20 +942,36 @@ static const struct cs35l36_pll_config *cs35l36_get_clk_config(
 	for (i = 0; i < ARRAY_SIZE(cs35l36_pll_sysclk); i++) {
 		if (cs35l36_pll_sysclk[i].freq == freq)
 			return &cs35l36_pll_sysclk[i];
 	}
 
 	return NULL;
 }
 
+static int cs35l36_set_tdm_slot(struct snd_soc_dai *dai,
+				    unsigned int tx_mask, unsigned int rx_mask,
+				    int slots, int slot_width)
+{
+	struct cs35l36_private *cs35l36 =
+			snd_soc_component_get_drvdata(dai->component);
+
+	if (rx_mask)
+		regmap_update_bits(cs35l36->regmap, CS35L36_ASP_RX1_SLOT,
+				   CS35L36_ASP_RX1_SLOT_MASK,
+				   ffs(rx_mask) - 1);
+
+	return 0;
+}
+
 static const struct snd_soc_dai_ops cs35l36_ops = {
 	.set_fmt = cs35l36_set_dai_fmt,
 	.hw_params = cs35l36_pcm_hw_params,
 	.set_sysclk = cs35l36_dai_set_sysclk,
+	.set_tdm_slot = cs35l36_set_tdm_slot,
 };
 
 #define CS35L36_RATES (		    \
 	SNDRV_PCM_RATE_8000_48000 | \
 	SNDRV_PCM_RATE_12000 |	    \
 	SNDRV_PCM_RATE_24000 |	    \
 	SNDRV_PCM_RATE_88200 |	    \
 	SNDRV_PCM_RATE_96000 |	    \

-- 
2.53.0

Re: [PATCH RFC 5/6] ASoC: cs35l36: Implement set_tdm_slot to program RX slot register

[Charles Keepax]

On Sun, Jul 05, 2026 at 10:06:55PM +0200, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Program ASP_RX1_SLOT with the first set bit of rx_mask so the
> amplifier listens on the correct TDM slot when configured by
> machine drivers.
> 
> Assisted-by: Claude:claude-4.6-opus
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
> +static int cs35l36_set_tdm_slot(struct snd_soc_dai *dai,
> +				    unsigned int tx_mask, unsigned int rx_mask,
> +				    int slots, int slot_width)
> +{
> +	struct cs35l36_private *cs35l36 =
> +			snd_soc_component_get_drvdata(dai->component);
> +
> +	if (rx_mask)
> +		regmap_update_bits(cs35l36->regmap, CS35L36_ASP_RX1_SLOT,
> +				   CS35L36_ASP_RX1_SLOT_MASK,
> +				   ffs(rx_mask) - 1);

It is more normal for the masks to specify the slot number rather
than the bit number, it would probably be nicer to stick with
that convention even though it will complicate the code here a
little.

Thanks,
Charles

Re: [PATCH RFC 5/6] ASoC: cs35l36: Implement set_tdm_slot to program RX slot register

[Konrad Dybcio]

On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Program ASP_RX1_SLOT with the first set bit of rx_mask so the
> amplifier listens on the correct TDM slot when configured by
> machine drivers.
> 
> Assisted-by: Claude:claude-4.6-opus
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---
>  sound/soc/codecs/cs35l36.c | 16 ++++++++++++++++
>  1 file changed, 16 insertions(+)
> 
> diff --git a/sound/soc/codecs/cs35l36.c b/sound/soc/codecs/cs35l36.c
> index 89645327945f1..944f4cb5763e4 100644
> --- a/sound/soc/codecs/cs35l36.c
> +++ b/sound/soc/codecs/cs35l36.c
> @@ -942,20 +942,36 @@ static const struct cs35l36_pll_config *cs35l36_get_clk_config(
>  	for (i = 0; i < ARRAY_SIZE(cs35l36_pll_sysclk); i++) {
>  		if (cs35l36_pll_sysclk[i].freq == freq)
>  			return &cs35l36_pll_sysclk[i];
>  	}
>  
>  	return NULL;
>  }
>  
> +static int cs35l36_set_tdm_slot(struct snd_soc_dai *dai,
> +				    unsigned int tx_mask, unsigned int rx_mask,
> +				    int slots, int slot_width)
> +{
> +	struct cs35l36_private *cs35l36 =
> +			snd_soc_component_get_drvdata(dai->component);
> +
> +	if (rx_mask)
> +		regmap_update_bits(cs35l36->regmap, CS35L36_ASP_RX1_SLOT,
> +				   CS35L36_ASP_RX1_SLOT_MASK,
> +				   ffs(rx_mask) - 1);

if (!rx_mask)
	return 0;

(or does the field need to be cleared?)

return regmap_update_bits

Konrad

[PATCH RFC 6/6] arm64: dts: qcom: sdm845-google: Add basic audio support

[David Heidelberg via B4 Relay]

From: David Heidelberg <david@ixit.cz>

Introduce support for sound card and wire two CS35L36 audio codecs for
top and bottom speakers.

Inspired by commit from Joel Selvaraj.

Signed-off-by: David Heidelberg <david@ixit.cz>
---
 arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi | 133 ++++++++++++++++++++-
 1 file changed, 131 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
index b2dc0327dff85..d00fee7ebd424 100644
--- a/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/sdm845-google-common.dtsi
@@ -2,16 +2,18 @@
 
 /dts-v1/;
 
 #include <dt-bindings/arm/qcom,ids.h>
 #include <dt-bindings/dma/qcom-gpi.h>
 #include <dt-bindings/input/linux-event-codes.h>
 #include <dt-bindings/interrupt-controller/irq.h>
 #include <dt-bindings/regulator/qcom,rpmh-regulator.h>
+#include <dt-bindings/sound/qcom,q6afe.h>
+#include <dt-bindings/sound/qcom,q6asm.h>
 
 #include "sdm845.dtsi"
 #include "pm8998.dtsi"
 #include "pmi8998.dtsi"
 
 /delete-node/ &mpss_region;
 /delete-node/ &venus_mem;
 /delete-node/ &cdsp_mem;
@@ -404,19 +406,63 @@ nfc@28 {
 		firmware-gpios = <&tlmm 79 GPIO_ACTIVE_HIGH>;
 
 		pinctrl-0 = <&nfc_int_default &nfc_enable_default>;
 		pinctrl-names = "default";
 	};
 };
 
 &i2c12 {
-	/* Bottom spkr (right) CS35L36 @ 40 */
+	status = "okay";
+
+	/* CS35L36, Bottom Speaker */
+	cs35l36_bottom: audio-codec@40 {
+		compatible = "cirrus,cs35l36";
+		reg = <0x40>;
+		reset-gpios = <&tlmm 112 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "Right"; /* Bottom */
+		VA-supply = <&vreg_s4a_1p8>;
+		interrupts-extended = <&tlmm 115 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&cs35l36_bottom_default_state>;
+		pinctrl-names = "default";
+
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-ctl-select = <1>;
+		cirrus,boost-ctl-millivolt = <10000>;
+		cirrus,boost-peak-milliamp = <3700>;
+		cirrus,temp-warn-threshold = <1>;
+		cirrus,multi-amp-mode;
+		cirrus,irq-drive-select = <0>;
+		cirrus,irq-gpio-select = <0>;
+	};
 
-	/* Top spkr (left) CS35L36 @ 41 */
+	/* CS35L36, Top Speaker */
+	cs35l36_top: audio-codec@41 {
+		compatible = "cirrus,cs35l36";
+		reg = <0x41>;
+		reset-gpios = <&tlmm 75 GPIO_ACTIVE_HIGH>;
+		#sound-dai-cells = <0>;
+		sound-name-prefix = "Left"; /* Top */
+		VA-supply = <&vreg_s4a_1p8>;
+		interrupts-extended = <&tlmm 40 IRQ_TYPE_LEVEL_LOW>;
+
+		pinctrl-0 = <&cs35l36_top_default_state>;
+		pinctrl-names = "default";
+
+		cirrus,boost-ind-nanohenry = <1000>;
+		cirrus,boost-ctl-select = <0x01>;
+		cirrus,boost-ctl-millivolt = <10000>;
+		cirrus,boost-peak-milliamp = <3700>;
+		cirrus,temp-warn-threshold = <1>;
+		cirrus,multi-amp-mode;
+		cirrus,irq-drive-select = <0>;
+		cirrus,irq-gpio-select = <0>;
+	};
 };
 
 &ipa {
 	firmware-name = "qcom/sdm845/Google/blueline/ipa_fws.mbn";
 	memory-region = <&ipa_fw_mem>;
 
 	status = "okay";
 };
@@ -449,16 +495,35 @@ &pm8998_resin {
 };
 
 &pmi8998_charger {
 	monitored-battery = <&battery>;
 
 	status = "okay";
 };
 
+&q6afedai {
+	dai@72 {
+		reg = <QUATERNARY_TDM_RX_0>;
+
+		qcom,tdm-sync-mode = <0>;
+		qcom,tdm-sync-src = <1>;
+		qcom,tdm-data-out = <0>;
+		qcom,tdm-invert-sync = <0>;
+		qcom,tdm-data-delay = <1>;
+		qcom,tdm-data-align = <0>;
+	};
+};
+
+&q6asmdai {
+	dai@0 {
+		reg = <MSM_FRONTEND_DAI_MULTIMEDIA1>;
+	};
+};
+
 &qupv3_id_0 {
 	status = "okay";
 };
 
 &qupv3_id_1 {
 	status = "okay";
 };
 
@@ -467,16 +532,48 @@ &qup_uart9_rx {
 	bias-pull-up;
 };
 
 &qup_uart9_tx {
 	drive-strength = <2>;
 	bias-disable;
 };
 
+&sound {
+	compatible = "qcom,sdm845-sndcard";
+	model = "Google Pixel 3";
+	pinctrl-0 = <&quat_mi2s_active>, <&quat_mi2s_sd0_active>,
+		    <&quat_mi2s_sd1_active>;
+	pinctrl-names = "default";
+
+	mm1-dai-link {
+		link-name = "MultiMedia1";
+
+		cpu {
+			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
+		};
+	};
+
+	cs35l36-dai-link {
+		link-name = "Speaker Playback";
+
+		cpu {
+			sound-dai = <&q6afedai QUATERNARY_TDM_RX_0>;
+		};
+
+		platform {
+			sound-dai = <&q6routing>;
+		};
+
+		codec {
+			sound-dai = <&cs35l36_bottom>, <&cs35l36_top>;
+		};
+	};
+};
+
 &tlmm {
 	gpio-reserved-ranges = < 0 4>, /* SPI (Intel MNH Pixel Visual Core) */
 			       <81 4>; /* SPI (most likely Fingerprint Cards FPC1075) */
 
 	nfc_int_default: nfc-int-default-state {
 		pins = "gpio63";
 		function = "gpio";
 		drive-strength = <2>;
@@ -505,16 +602,48 @@ touchscreen_pins: ts-pins-gpio-state {
 	};
 
 	touchscreen_i2c_pins: qup-i2c2-gpio-state {
 		pins = "gpio27", "gpio28";
 		function = "gpio";
 		drive-strength = <2>;
 		bias-disable;
 	};
+
+	cs35l36_bottom_default_state: cs35l36-bottom-default-state {
+		reset-pins {
+			pins = "gpio112";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+
+		irq-pins {
+			pins = "gpio115";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+	};
+
+	cs35l36_top_default_state: cs35l36-top-default-state {
+		irq-pins {
+			pins = "gpio40";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-pull-up;
+		};
+
+		reset-pins {
+			pins = "gpio75";
+			function = "gpio";
+			drive-strength = <2>;
+			bias-disable;
+		};
+	};
 };
 
 &uart6 {
 	pinctrl-0 = <&qup_uart6_4pin>;
 
 	status = "okay";
 
 	bluetooth {

-- 
2.53.0

Re: [PATCH RFC 6/6] arm64: dts: qcom: sdm845-google: Add basic audio support

[Konrad Dybcio]

On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Introduce support for sound card and wire two CS35L36 audio codecs for
> top and bottom speakers.
> 
> Inspired by commit from Joel Selvaraj.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---

This looks good, but since the binding is not YAML, it introduces:

failed to match any schema with compatible: ['cirrus,cs35l36']

so please also fix that up

Konrad

Re: [PATCH RFC 6/6] arm64: dts: qcom: sdm845-google: Add basic audio support

[David Heidelberg]

On 06/07/2026 11:14, Konrad Dybcio wrote:
> On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
>> From: David Heidelberg <david@ixit.cz>
>>
>> Introduce support for sound card and wire two CS35L36 audio codecs for
>> top and bottom speakers.
>>
>> Inspired by commit from Joel Selvaraj.
>>
>> Signed-off-by: David Heidelberg <david@ixit.cz>
>> ---
> 
> This looks good, but since the binding is not YAML, it introduces:
> 
> failed to match any schema with compatible: ['cirrus,cs35l36']
> 
> so please also fix that up

I did :) bff7fad1010eea6f183fb110b54171cf8700ef8e , at this moment in the -next.

David
> 
> Konrad

Re: [PATCH RFC 6/6] arm64: dts: qcom: sdm845-google: Add basic audio support

[Konrad Dybcio]

On 7/6/26 11:17 AM, David Heidelberg wrote:
> On 06/07/2026 11:14, Konrad Dybcio wrote:
>> On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
>>> From: David Heidelberg <david@ixit.cz>
>>>
>>> Introduce support for sound card and wire two CS35L36 audio codecs for
>>> top and bottom speakers.
>>>
>>> Inspired by commit from Joel Selvaraj.
>>>
>>> Signed-off-by: David Heidelberg <david@ixit.cz>
>>> ---
>>
>> This looks good, but since the binding is not YAML, it introduces:
>>
>> failed to match any schema with compatible: ['cirrus,cs35l36']
>>
>> so please also fix that up
> 
> I did :) bff7fad1010eea6f183fb110b54171cf8700ef8e , at this moment in the -next.

I didn't run git fetch at the time, you're right!

Konrad

Re: [PATCH RFC 6/6] arm64: dts: qcom: sdm845-google: Add basic audio support

[Konrad Dybcio]

On 7/5/26 10:06 PM, David Heidelberg via B4 Relay wrote:
> From: David Heidelberg <david@ixit.cz>
> 
> Introduce support for sound card and wire two CS35L36 audio codecs for
> top and bottom speakers.
> 
> Inspired by commit from Joel Selvaraj.
> 
> Signed-off-by: David Heidelberg <david@ixit.cz>
> ---

[...]

> +	/* CS35L36, Bottom Speaker */
> +	cs35l36_bottom: audio-codec@40 {
> +		compatible = "cirrus,cs35l36";
> +		reg = <0x40>;
> +		reset-gpios = <&tlmm 112 GPIO_ACTIVE_HIGH>;
> +		#sound-dai-cells = <0>;
> +		sound-name-prefix = "Right"; /* Bottom */

One comment's enough (either above the node or here)

[...]

> +	mm1-dai-link {
> +		link-name = "MultiMedia1";
> +
> +		cpu {
> +			sound-dai = <&q6asmdai MSM_FRONTEND_DAI_MULTIMEDIA1>;
> +		};
> +	};
> +
> +	cs35l36-dai-link {
> +		link-name = "Speaker Playback";
> +
> +		cpu {
> +			sound-dai = <&q6afedai QUATERNARY_TDM_RX_0>;
> +		};
> +
> +		platform {
> +			sound-dai = <&q6routing>;
> +		};
> +
> +		codec {
> +			sound-dai = <&cs35l36_bottom>, <&cs35l36_top>;
> +		};

nit: 'co'dec < 'cp'u < 'p'latform

also 'c's35l36-dai-link < `m`m1-dai-link

otherwise:

Reviewed-by: Konrad Dybcio <konrad.dybcio@oss.qualcomm.com>
 
Konrad