From: Osama Abdelkader <osama.abdelkader@gmail.com>
To: luca.ceresoli@bootlin.com,
Andrzej Hajda <andrzej.hajda@intel.com>,
Neil Armstrong <neil.armstrong@linaro.org>,
Robert Foss <rfoss@kernel.org>,
Laurent Pinchart <Laurent.pinchart@ideasonboard.com>,
Jonas Karlman <jonas@kwiboo.se>,
Jernej Skrabec <jernej.skrabec@gmail.com>,
Maarten Lankhorst <maarten.lankhorst@linux.intel.com>,
Maxime Ripard <mripard@kernel.org>,
Thomas Zimmermann <tzimmermann@suse.de>,
David Airlie <airlied@gmail.com>, Simona Vetter <simona@ffwll.ch>,
dri-devel@lists.freedesktop.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH 1/2] drm/bridge: tc358762: use devm for bridge registration and DSI attach
Date: Mon, 6 Jul 2026 14:59:17 +0200 [thread overview]
Message-ID: <akumpZf2lTIbOZj4@osama> (raw)
In-Reply-To: <20260521215228.188615-1-osama.abdelkader@gmail.com>
On Thu, May 21, 2026 at 11:52:26PM +0200, Osama Abdelkader wrote:
> Replace manual drm_bridge_remove()/mipi_dsi_detach() in remove with
> devm_drm_bridge_add() and devm_mipi_dsi_attach() in probe. Also check
> the return value from bridge registration.
>
> Signed-off-by: Osama Abdelkader <osama.abdelkader@gmail.com>
> ---
> drivers/gpu/drm/bridge/tc358762.c | 19 +++++--------------
> 1 file changed, 5 insertions(+), 14 deletions(-)
>
> diff --git a/drivers/gpu/drm/bridge/tc358762.c b/drivers/gpu/drm/bridge/tc358762.c
> index 3d75d9cfa45e..3a021ca895f1 100644
> --- a/drivers/gpu/drm/bridge/tc358762.c
> +++ b/drivers/gpu/drm/bridge/tc358762.c
> @@ -293,25 +293,17 @@ static int tc358762_probe(struct mipi_dsi_device *dsi)
> ctx->bridge.of_node = dev->of_node;
> ctx->bridge.pre_enable_prev_first = true;
>
> - drm_bridge_add(&ctx->bridge);
> + ret = devm_drm_bridge_add(dev, &ctx->bridge);
> + if (ret < 0)
> + return ret;
>
> - ret = mipi_dsi_attach(dsi);
> - if (ret < 0) {
> - drm_bridge_remove(&ctx->bridge);
> + ret = devm_mipi_dsi_attach(dev, dsi);
> + if (ret < 0)
> dev_err(dev, "failed to attach dsi\n");
> - }
>
> return ret;
> }
>
> -static void tc358762_remove(struct mipi_dsi_device *dsi)
> -{
> - struct tc358762 *ctx = mipi_dsi_get_drvdata(dsi);
> -
> - mipi_dsi_detach(dsi);
> - drm_bridge_remove(&ctx->bridge);
> -}
> -
> static const struct of_device_id tc358762_of_match[] = {
> { .compatible = "toshiba,tc358762" },
> { }
> @@ -320,7 +312,6 @@ MODULE_DEVICE_TABLE(of, tc358762_of_match);
>
> static struct mipi_dsi_driver tc358762_driver = {
> .probe = tc358762_probe,
> - .remove = tc358762_remove,
> .driver = {
> .name = "tc358762",
> .of_match_table = tc358762_of_match,
> --
> 2.43.0
>
ping.
prev parent reply other threads:[~2026-07-06 12:59 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-05-21 21:52 [PATCH 1/2] drm/bridge: tc358762: use devm for bridge registration and DSI attach Osama Abdelkader
2026-05-21 21:52 ` [PATCH 2/2] drm/bridge: tc358764: " Osama Abdelkader
2026-07-06 12:59 ` Osama Abdelkader [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=akumpZf2lTIbOZj4@osama \
--to=osama.abdelkader@gmail.com \
--cc=Laurent.pinchart@ideasonboard.com \
--cc=airlied@gmail.com \
--cc=andrzej.hajda@intel.com \
--cc=dri-devel@lists.freedesktop.org \
--cc=jernej.skrabec@gmail.com \
--cc=jonas@kwiboo.se \
--cc=linux-kernel@vger.kernel.org \
--cc=luca.ceresoli@bootlin.com \
--cc=maarten.lankhorst@linux.intel.com \
--cc=mripard@kernel.org \
--cc=neil.armstrong@linaro.org \
--cc=rfoss@kernel.org \
--cc=simona@ffwll.ch \
--cc=tzimmermann@suse.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox