From: Frank Li <Frank.li@oss.nxp.com>
To: Koichiro Den <den@valinux.co.jp>
Cc: "Manivannan Sadhasivam" <mani@kernel.org>,
"Jingoo Han" <jingoohan1@gmail.com>,
"Lorenzo Pieralisi" <lpieralisi@kernel.org>,
"Krzysztof Wilczyński" <kwilczynski@kernel.org>,
"Rob Herring" <robh@kernel.org>,
"Bjorn Helgaas" <bhelgaas@google.com>,
"Kishon Vijay Abraham I" <kishon@kernel.org>,
"Frank Li" <Frank.Li@kernel.org>,
"Marek Vasut" <marek.vasut+renesas@mailbox.org>,
"Yoshihiro Shimoda" <yoshihiro.shimoda.uh@renesas.com>,
linux-pci@vger.kernel.org, linux-kernel@vger.kernel.org
Subject: Re: [PATCH v6 6/6] PCI: dwc: Expose endpoint DMA resources
Date: Tue, 4 Aug 2026 11:29:12 -0500 [thread overview]
Message-ID: <anITWMXfOBcFAOhs@SMW015318> (raw)
In-Reply-To: <20260804033855.2115817-7-den@valinux.co.jp>
On Tue, Aug 04, 2026 at 12:38:55PM +0900, Koichiro Den wrote:
> Expose the DesignWare endpoint-integrated eDMA register window, logical
> DMA channels, and linked-list descriptor memories through the EPC
> auxiliary resource API. This lets endpoint functions decide which
> channels to publish to the host.
>
> When the DMA register window is already visible through a reserved BAR
> region, report its BAR and offset. Otherwise report it as a normal
> physical resource so an endpoint function can map it. DMA channel
> resources carry hardware channel selectors and refer to linked-list
> descriptor memory by ID.
>
> Expose DMA controller and channel resources only after the local DW eDMA
> provider has been registered, and only expose channels whose linked-list
> descriptor memory is available. The interrupt-emulation doorbell remains
> reported when the local DW eDMA provider is registered and its offset is
> valid, even if linked-list resources are unavailable. DWC non-LL exposure
> needs a metadata ABI and host parser extension, so leave it unsupported
> for now. Reject VF auxiliary resource queries because the
> RC-programmable DWC eDMA/HDMA register window is assigned to a PF BAR
> only.
>
> Signed-off-by: Koichiro Den <den@valinux.co.jp>
> ---
Reviewed-by: Frank Li <Frank.Li@nxp.com>
> Changes in v6:
> - Use the same DMA resource state for bounds checking and array filling.
> (Sashiko)
> - Move this patch after the delegation support so every advertised DMA
> channel is immediately usable. (Sashiko)
>
> .../pci/controller/dwc/pcie-designware-ep.c | 138 +++++++++++++++++-
> 1 file changed, 130 insertions(+), 8 deletions(-)
>
> diff --git a/drivers/pci/controller/dwc/pcie-designware-ep.c b/drivers/pci/controller/dwc/pcie-designware-ep.c
> index 8c1ac9e3c517..440311e2bed9 100644
> --- a/drivers/pci/controller/dwc/pcie-designware-ep.c
> +++ b/drivers/pci/controller/dwc/pcie-designware-ep.c
> @@ -858,6 +858,22 @@ dw_pcie_ep_find_bar_rsvd_region(struct dw_pcie_ep *ep,
> return NULL;
> }
>
> +static bool dw_pcie_ep_has_edma_ll_resources(struct dw_edma_chip *edma,
> + u16 ll_wr_cnt, u16 ll_rd_cnt)
> +{
> + unsigned int i;
> +
> + for (i = 0; i < ll_wr_cnt; i++)
> + if (!edma->ll_region_wr[i].sz)
> + return false;
> +
> + for (i = 0; i < ll_rd_cnt; i++)
> + if (!edma->ll_region_rd[i].sz)
> + return false;
> +
> + return true;
> +}
> +
> static int dw_pcie_ep_check_edma_vfunc(u8 vfunc_no)
> {
> /*
> @@ -877,14 +893,30 @@ dw_pcie_ep_get_aux_resources_count(struct pci_epc *epc, u8 func_no,
> struct dw_pcie_ep *ep = epc_get_drvdata(epc);
> struct dw_pcie *pci = to_dw_pcie_from_ep(ep);
> struct dw_edma_chip *edma = &pci->edma;
> + u16 ll_wr_cnt, ll_rd_cnt;
> + int count = 0;
> + int ret;
>
> if (!pci->edma_reg_size)
> return 0;
>
> - if (edma->db_offset == ~0)
> + ret = dw_pcie_ep_check_edma_vfunc(vfunc_no);
> + if (ret)
> + return ret;
> +
> + if (!edma->dw)
> return 0;
>
> - return 1;
> + ll_wr_cnt = edma->ll_wr_cnt;
> + ll_rd_cnt = edma->ll_rd_cnt;
> +
> + if (dw_pcie_ep_has_edma_ll_resources(edma, ll_wr_cnt, ll_rd_cnt))
> + count += 1 + 2 * (ll_wr_cnt + ll_rd_cnt);
> +
> + if (edma->db_offset != ~0)
> + count++;
> +
> + return count;
> }
>
> static int
> @@ -897,14 +929,34 @@ dw_pcie_ep_get_aux_resources(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> const struct pci_epc_bar_rsvd_region *rsvd;
> struct dw_edma_chip *edma = &pci->edma;
> enum pci_barno dma_ctrl_bar = NO_BAR;
> - resource_size_t db_offset = edma->db_offset;
> + resource_size_t db_offset;
> resource_size_t dma_ctrl_bar_offset = 0;
> resource_size_t dma_reg_size;
> - int count;
> + u16 ll_wr_cnt, ll_rd_cnt;
> + bool has_ll;
> + unsigned int i;
> + int count, ret;
>
> - count = dw_pcie_ep_get_aux_resources_count(epc, func_no, vfunc_no);
> - if (count < 0)
> - return count;
> + if (!pci->edma_reg_size)
> + return 0;
> +
> + ret = dw_pcie_ep_check_edma_vfunc(vfunc_no);
> + if (ret)
> + return ret;
> +
> + if (!edma->dw)
> + return 0;
> +
> + /* Keep the bounds check and fill on the same provider view. */
> + ll_wr_cnt = edma->ll_wr_cnt;
> + ll_rd_cnt = edma->ll_rd_cnt;
> + db_offset = edma->db_offset;
> + has_ll = dw_pcie_ep_has_edma_ll_resources(edma, ll_wr_cnt,
> + ll_rd_cnt);
> +
> + count = db_offset != ~0;
> + if (has_ll)
> + count += 1 + 2 * (ll_wr_cnt + ll_rd_cnt);
>
> if (num_resources < count)
> return -ENOSPC;
> @@ -921,6 +973,76 @@ dw_pcie_ep_get_aux_resources(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> if (rsvd && rsvd->size < dma_reg_size)
> dma_reg_size = rsvd->size;
>
> + count = 0;
> + if (has_ll) {
> + resources[count++] = (struct pci_epc_aux_resource) {
> + .type = PCI_EPC_AUX_DMA_CTRL_MMIO,
> + .phys_addr = pci->edma_reg_phys,
> + .size = dma_reg_size,
> + .bar = dma_ctrl_bar,
> + .bar_offset = dma_ctrl_bar_offset,
> + .u.dma_ctrl = {
> + .reg_layout = PCI_EPC_AUX_DMA_REG_LAYOUT_DW_EDMA,
> + .reg_layout_data = edma->mf,
> + .ep_to_rc_ch_cnt = ll_wr_cnt,
> + .rc_to_ep_ch_cnt = ll_rd_cnt,
> + },
> + };
> +
> + for (i = 0; i < ll_wr_cnt; i++) {
> + struct dw_edma_region *ll = &edma->ll_region_wr[i];
> + u16 desc_mem_id = i;
> +
> + resources[count++] = (struct pci_epc_aux_resource) {
> + .type = PCI_EPC_AUX_DMA_CHAN,
> + .bar = NO_BAR,
> + .u.dma_chan = {
> + .dir = PCI_EPC_AUX_DMA_EP_TO_RC,
> + .hw_ch = i,
> + .desc_mem_id = desc_mem_id,
> + },
> + };
> +
> + resources[count++] = (struct pci_epc_aux_resource) {
> + .type = PCI_EPC_AUX_DMA_DESC_MEM,
> + .phys_addr = ll->paddr,
> + .size = ll->sz,
> + .bar = NO_BAR,
> + .u.dma_desc = {
> + .id = desc_mem_id,
> + },
> + };
> + }
> +
> + for (i = 0; i < ll_rd_cnt; i++) {
> + struct dw_edma_region *ll = &edma->ll_region_rd[i];
> + u16 desc_mem_id = ll_wr_cnt + i;
> +
> + resources[count++] = (struct pci_epc_aux_resource) {
> + .type = PCI_EPC_AUX_DMA_CHAN,
> + .bar = NO_BAR,
> + .u.dma_chan = {
> + .dir = PCI_EPC_AUX_DMA_RC_TO_EP,
> + .hw_ch = i,
> + .desc_mem_id = desc_mem_id,
> + },
> + };
> +
> + resources[count++] = (struct pci_epc_aux_resource) {
> + .type = PCI_EPC_AUX_DMA_DESC_MEM,
> + .phys_addr = ll->paddr,
> + .size = ll->sz,
> + .bar = NO_BAR,
> + .u.dma_desc = {
> + .id = desc_mem_id,
> + },
> + };
> + }
> + }
> +
> + if (db_offset == ~0)
> + return 0;
> +
> /*
> * For interrupt-emulation doorbells, report a standalone resource
> * instead of bundling it into the DMA controller MMIO resource.
> @@ -929,7 +1051,7 @@ dw_pcie_ep_get_aux_resources(struct pci_epc *epc, u8 func_no, u8 vfunc_no,
> sizeof(u32), dma_reg_size))
> return -EINVAL;
>
> - resources[0] = (struct pci_epc_aux_resource) {
> + resources[count] = (struct pci_epc_aux_resource) {
> .type = PCI_EPC_AUX_DOORBELL_MMIO,
> .phys_addr = pci->edma_reg_phys + db_offset,
> .size = sizeof(u32),
> --
> 2.51.0
>
prev parent reply other threads:[~2026-08-04 16:29 UTC|newest]
Thread overview: 17+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-08-04 3:38 [PATCH v6 0/6] PCI: endpoint: Expose endpoint DMA resources (part 2/3) Koichiro Den
2026-08-04 3:38 ` [PATCH v6 1/6] PCI: endpoint: Define endpoint DMA BAR metadata format Koichiro Den
2026-08-04 15:23 ` Frank Li
2026-08-05 2:03 ` Koichiro Den
2026-08-04 3:38 ` [PATCH v6 2/6] PCI: endpoint: Add DMA auxiliary resource metadata Koichiro Den
2026-08-04 15:26 ` Frank Li
2026-08-04 3:38 ` [PATCH v6 3/6] PCI: endpoint: Add API to delegate EPC DMA channels to the host Koichiro Den
2026-08-04 16:06 ` Frank Li
2026-08-04 3:38 ` [PATCH v6 4/6] dmaengine: dw-edma: Add delegated channel request helpers Koichiro Den
2026-08-04 16:23 ` Frank Li
2026-08-05 2:05 ` Koichiro Den
2026-08-05 18:47 ` Frank Li
2026-08-06 3:45 ` Koichiro Den
2026-08-06 16:50 ` Frank Li
2026-08-04 3:38 ` [PATCH v6 5/6] PCI: dwc: Implement endpoint DMA channel delegation Koichiro Den
2026-08-04 3:38 ` [PATCH v6 6/6] PCI: dwc: Expose endpoint DMA resources Koichiro Den
2026-08-04 16:29 ` Frank Li [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=anITWMXfOBcFAOhs@SMW015318 \
--to=frank.li@oss.nxp.com \
--cc=Frank.Li@kernel.org \
--cc=bhelgaas@google.com \
--cc=den@valinux.co.jp \
--cc=jingoohan1@gmail.com \
--cc=kishon@kernel.org \
--cc=kwilczynski@kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-pci@vger.kernel.org \
--cc=lpieralisi@kernel.org \
--cc=mani@kernel.org \
--cc=marek.vasut+renesas@mailbox.org \
--cc=robh@kernel.org \
--cc=yoshihiro.shimoda.uh@renesas.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox