[PATCH v7 0/2] usb: typec: ucsi: Add ITE IT8851/IT8853 support

[PATCH v7 0/2] usb: typec: ucsi: Add ITE IT8851/IT8853 support

[Amber Kao]

This series adds Device Tree bindings and minimal UCSI driver support 
for the ITE IT8851/IT8853 USB Type-C Power Delivery controller over I2C.

Changes in v7:
- dt-bindings: define 'reg' for the connector@[01] nodes, since a
  unit-address requires a 'reg' property.
- dt-bindings: dropped Krzysztof's Reviewed-by tag due to the above
  change.
- ucsi_itepd: use guard(mutex) in itepd_process_event(),
  ucsi_itepd_read_cci() and ucsi_itepd_read_message_in().
- ucsi_itepd: kept request_threaded_irq() instead of
  devm_request_threaded_irq(). ucsi_destroy() is not devres-managed and
  runs inside remove(), while a devm IRQ is only released after remove()
  has returned; an interrupt in that window would call
  ucsi_notify_common() on an already destroyed ucsi instance.

Link to v6: https://patch.msgid.link/20260731-ucsi-itepd-v6-0-d25ae12b181f@ite.com.tw
Link to v5: https://patch.msgid.link/20260724-ucsi-itepd-v5-0-d1a83e5c9c77@ite.com.tw
Link to v4: https://lore.kernel.org/all/20260717-ucsi-itepd-v4-0-f3ba5addd0df@ite.com.tw/
Link to v3: https://lore.kernel.org/all/20260710-ucsi-itepd-feature-v3-0-8523e1e1c47a@ite.com.tw/
Link to v2: https://lore.kernel.org/all/20260710-ucsi-itepd-feature-v2-0-41943fd5df38@ite.com.tw/
Link to v1: https://lore.kernel.org/all/20260615-ucsi-itepd-feature-v1-0-a826cfd0df6a@ite.com.tw/

Signed-off-by: Amber Kao <amber.kao@ite.com.tw>
---
Amber Kao (2):
      dt-bindings: usb: Add ITE IT8851/IT8853 Type-C PD controllers
      usb: typec: ucsi: Add ITE IT8851/IT8853 Type-C PD controller driver

 .../devicetree/bindings/usb/ite,it8851.yaml        | 156 +++++++++
 MAINTAINERS                                        |   9 +
 drivers/usb/typec/ucsi/Kconfig                     |  10 +
 drivers/usb/typec/ucsi/Makefile                    |   1 +
 drivers/usb/typec/ucsi/ucsi_itepd.c                | 356 +++++++++++++++++++++
 5 files changed, 532 insertions(+)
---
base-commit: 8fde5d1d47f69db6082dfa34500c27f8485389a5
change-id: 20260717-ucsi-itepd-4e943e1382f0

Best regards,
--  
Amber Kao <amber.kao@ite.com.tw>

[PATCH v7 1/2] dt-bindings: usb: Add ITE IT8851/IT8853 Type-C PD controllers

[Amber Kao]

Add device tree binding for the ITE IT8851 and IT8853 I2C-based USB
Type-C Power Delivery controllers.
The IT8851 supports one Type-C port; the IT8853 is the two-port variant
sharing the same interface.

Add a MAINTAINERS entry for the binding.

Cc: Yaode Fang <Yaode.Fang@ite.com.tw>
Cc: Jeson Yang <jeson.yang@ite.com.tw>
Cc: Bling Chiang <Bling.Chiang@ite.com.tw>
Cc: Eric Su <Eric.Su@ite.com.tw>
Cc: Doreen Lin <doreen.lin@ite.com.tw>
Signed-off-by: Amber Kao <amber.kao@ite.com.tw>
---
 .../devicetree/bindings/usb/ite,it8851.yaml        | 156 +++++++++++++++++++++
 MAINTAINERS                                        |   8 ++
 2 files changed, 164 insertions(+)

diff --git a/Documentation/devicetree/bindings/usb/ite,it8851.yaml b/Documentation/devicetree/bindings/usb/ite,it8851.yaml
new file mode 100644
index 000000000000..9f60017fb022
--- /dev/null
+++ b/Documentation/devicetree/bindings/usb/ite,it8851.yaml
@@ -0,0 +1,156 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/usb/ite,it8851.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ITE IT8851/IT8853 USB Type-C Power Delivery Controller
+
+maintainers:
+  - Jeson Yang <jeson.yang@ite.com.tw>
+
+description:
+  The ITE IT8851 is an I2C-based USB Type-C Power Delivery (PD) controller
+  supporting one Type-C port.
+  The IT8853 is the two-port variant sharing the same programming interface.
+
+properties:
+  compatible:
+    oneOf:
+      - const: ite,it8851
+      - items:
+          - const: ite,it8853
+          - const: ite,it8851
+
+  reg:
+    maxItems: 1
+
+  interrupts:
+    maxItems: 1
+
+  wakeup-source: true
+
+  '#address-cells':
+    const: 1
+
+  '#size-cells':
+    const: 0
+
+patternProperties:
+  '^connector@[01]$':
+    $ref: /schemas/connector/usb-connector.yaml#
+    properties:
+      reg:
+        maxItems: 1
+    required:
+      - reg
+    unevaluatedProperties: false
+
+required:
+  - compatible
+  - reg
+  - interrupts
+
+anyOf:
+  - required:
+      - connector@0
+  - required:
+      - connector@1
+
+allOf:
+  - if:
+      not:
+        properties:
+          compatible:
+            contains:
+              const: ite,it8853
+    then:
+      properties:
+        connector@1: false
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/interrupt-controller/irq.h>
+
+    i2c {
+        #address-cells = <1>;
+        #size-cells = <0>;
+
+        typec@40 {
+            compatible = "ite,it8853", "ite,it8851";
+            reg = <0x40>;
+            interrupts-extended = <&tlmm 129 IRQ_TYPE_EDGE_FALLING>;
+            wakeup-source;
+
+            #address-cells = <1>;
+            #size-cells = <0>;
+
+            connector@0 {
+                compatible = "usb-c-connector";
+                reg = <0>;
+                label = "USB-C-0";
+                power-role = "dual";
+                data-role = "dual";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        endpoint {
+                            remote-endpoint = <&eud_con>;
+                        };
+                    };
+
+                    port@1 {
+                        reg = <1>;
+                        endpoint {
+                            remote-endpoint = <&redriver_ss_out>;
+                        };
+                    };
+
+                    port@2 {
+                        reg = <2>;
+                        endpoint {
+                            remote-endpoint = <&fsa4480_sbu_mux>;
+                        };
+                    };
+                };
+            };
+
+            connector@1 {
+                compatible = "usb-c-connector";
+                reg = <1>;
+                label = "USB-C-1";
+                power-role = "dual";
+                data-role = "dual";
+
+                ports {
+                    #address-cells = <1>;
+                    #size-cells = <0>;
+
+                    port@0 {
+                        reg = <0>;
+                        endpoint {
+                          remote-endpoint = <&usb1_hs_con>;
+                        };
+                    };
+                    port@1 {
+                        reg = <1>;
+                        endpoint {
+                          remote-endpoint = <&redriver1_ss_out>;
+                        };
+                    };
+                    port@2 {
+                        reg = <2>;
+                        endpoint {
+                          remote-endpoint = <&sbu_mux1>;
+                        };
+                    };
+                };
+            };
+        };
+    };
diff --git a/MAINTAINERS b/MAINTAINERS
index 461a3eed6129..ec0eeea79b9e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13720,6 +13720,14 @@ T:	git https://gitlab.freedesktop.org/drm/misc/kernel.git
 F:	Documentation/devicetree/bindings/display/bridge/ite,it66121.yaml
 F:	drivers/gpu/drm/bridge/ite-it66121.c
 
+ITE IT8851 TYPE-C PD CONTROLLER DRIVER
+M:	Amber Kao <amber.kao@ite.com.tw>
+R:	Jeson Yang <jeson.yang@ite.com.tw>
+R:	Yaode Fang <Yaode.Fang@ite.com.tw>
+L:	linux-usb@vger.kernel.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/usb/ite,it8851.yaml
+
 IVTV VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
 L:	linux-media@vger.kernel.org

-- 
2.53.0

[PATCH v7 2/2] usb: typec: ucsi: Add ITE IT8851/IT8853 Type-C PD controller driver

[Amber Kao]

Add a UCSI driver for the ITE IT8851 and IT8853 I2C-based USB Type-C
Power Delivery controllers.
The controller signals UCSI through a shared interrupt line; events are
read and acknowledged via vendor-specific registers, and
UCSI events are forwarded to the UCSI core.

Add the driver file to the MAINTAINERS entry.

Cc: Yaode Fang <Yaode.Fang@ite.com.tw>
Cc: Jeson Yang <jeson.yang@ite.com.tw>
Cc: Bling Chiang <Bling.Chiang@ite.com.tw>
Cc: Eric Su <Eric.Su@ite.com.tw>
Cc: Doreen Lin <doreen.lin@ite.com.tw>
Signed-off-by: Amber Kao <amber.kao@ite.com.tw>
---
 MAINTAINERS                         |   1 +
 drivers/usb/typec/ucsi/Kconfig      |  10 +
 drivers/usb/typec/ucsi/Makefile     |   1 +
 drivers/usb/typec/ucsi/ucsi_itepd.c | 356 ++++++++++++++++++++++++++++++++++++
 4 files changed, 368 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index ec0eeea79b9e..1e76e299e6c3 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -13727,6 +13727,7 @@ R:	Yaode Fang <Yaode.Fang@ite.com.tw>
 L:	linux-usb@vger.kernel.org
 S:	Maintained
 F:	Documentation/devicetree/bindings/usb/ite,it8851.yaml
+F:	drivers/usb/typec/ucsi/ucsi_itepd.c
 
 IVTV VIDEO4LINUX DRIVER
 M:	Andy Walls <awalls@md.metrocast.net>
diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
index 87dd992a4b9e..0f10dac9b34b 100644
--- a/drivers/usb/typec/ucsi/Kconfig
+++ b/drivers/usb/typec/ucsi/Kconfig
@@ -104,4 +104,14 @@ config UCSI_HUAWEI_GAOKUN
 	  To compile the driver as a module, choose M here: the module will be
 	  called ucsi_huawei_gaokun.
 
+config UCSI_ITEPD
+	tristate "UCSI Interface Driver for ITE IT8851/IT8853"
+	depends on I2C
+	help
+	  This driver enables UCSI support on platforms that expose an
+	  ITE IT8851/IT8853 Type-C Power Delivery controller over an I2C interface.
+
+	  To compile the driver as a module, choose M here: the module
+	  will be called ucsi_itepd.
+
 endif
diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
index c7e38bf01350..0903a1fd486b 100644
--- a/drivers/usb/typec/ucsi/Makefile
+++ b/drivers/usb/typec/ucsi/Makefile
@@ -28,3 +28,4 @@ obj-$(CONFIG_UCSI_PMIC_GLINK)		+= ucsi_glink.o
 obj-$(CONFIG_CROS_EC_UCSI)		+= cros_ec_ucsi.o
 obj-$(CONFIG_UCSI_LENOVO_YOGA_C630)	+= ucsi_yoga_c630.o
 obj-$(CONFIG_UCSI_HUAWEI_GAOKUN)	+= ucsi_huawei_gaokun.o
+obj-$(CONFIG_UCSI_ITEPD)		+= ucsi_itepd.o
diff --git a/drivers/usb/typec/ucsi/ucsi_itepd.c b/drivers/usb/typec/ucsi/ucsi_itepd.c
new file mode 100644
index 000000000000..d1887435a2e1
--- /dev/null
+++ b/drivers/usb/typec/ucsi/ucsi_itepd.c
@@ -0,0 +1,356 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Copyright (C) 2025-2026, ITE. All Rights Reserved
+ *
+ */
+#include <linux/bits.h>
+#include <linux/err.h>
+#include <linux/i2c.h>
+#include <linux/interrupt.h>
+#include <linux/module.h>
+#include <linux/mutex.h>
+#include <linux/slab.h>
+#include <linux/unaligned.h>
+
+#include "ucsi.h"
+
+#define ITEPD_UCSI_VERSION_REG	0x80
+#define ITEPD_UCSI_CCI_REG	0x84
+#define ITEPD_UCSI_MSG_IN_REG	0x88
+#define ITEPD_UCSI_CONTROL_REG	0x98
+
+#define ITEPD_VENDOR_WC_INT	0xbc
+#define ITEPD_VENDOR_INT	0xbd
+#define ITEPD_ALERT_VDM_EVENT	BIT(0)
+#define ITEPD_ALERT_UCSI_EVENT	BIT(1)
+
+#define ITEPD_MSG_IN_MAX_LEN	0x28
+
+#define ITEPD_EVENT_NONE	0
+#define ITEPD_EVENT_UCSI	1
+#define ITEPD_EVENT_VDM		2
+
+struct itepd {
+	struct i2c_client *client;
+	struct ucsi *ucsi;
+	struct mutex i2c_lock;		/* Serializes I2C accesses */
+	struct mutex event_lock;	/* Serializes event processing (IRQ vs poll) */
+	struct mutex received_lock;	/* Protects cci and msg_in */
+	u8 msg_in[ITEPD_MSG_IN_MAX_LEN];
+	u32 cci;
+};
+
+static u8 ucsi_itepd_get_len(u32 cci)
+{
+	if (cci & UCSI_CCI_COMMAND_COMPLETE)
+		return UCSI_CCI_LENGTH(cci);
+	return 0;
+}
+
+static int itepd_read_reg(struct itepd *itepd, u8 reg, void *data, u32 len)
+{
+	struct i2c_client *client = itepd->client;
+	struct i2c_msg msg[2] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= 1,
+			.buf	= &reg,
+		},
+		{
+			.addr	= client->addr,
+			.flags	= I2C_M_RD,
+			.len	= len,
+			.buf	= data,
+		}
+
+	};
+	int ret;
+
+	mutex_lock(&itepd->i2c_lock);
+	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
+	mutex_unlock(&itepd->i2c_lock);
+	if (ret < 0) {
+		dev_err_ratelimited(&client->dev, "reg 0x%02x read failed: %d\n",
+				    reg, ret);
+		return ret;
+	}
+
+	return ret == ARRAY_SIZE(msg) ? 0 : -EIO;
+}
+
+static int itepd_write_reg(struct itepd *itepd, u8 reg, const void *data, u32 len)
+{
+	struct i2c_client *client = itepd->client;
+	u8 buf[sizeof(u64) + 1];
+	struct i2c_msg msg[1] = {
+		{
+			.addr	= client->addr,
+			.flags	= 0,
+			.len	= len + 1,
+			.buf	= buf,
+		}
+	};
+	int ret;
+
+	if (len > sizeof(buf) - 1)
+		return -EINVAL;
+
+	buf[0] = reg;
+	memcpy(&buf[1], data, len);
+
+	mutex_lock(&itepd->i2c_lock);
+	ret = i2c_transfer(client->adapter, msg, 1);
+	mutex_unlock(&itepd->i2c_lock);
+	if (ret < 0) {
+		dev_err_ratelimited(&client->dev, "reg 0x%02x write failed: %d\n",
+				    reg, ret);
+		return ret;
+	}
+
+	return ret == 1 ? 0 : -EIO;
+}
+
+static int itepd_process_event(struct itepd *itepd, u32 *cci)
+{
+	u8 msg_in[ITEPD_MSG_IN_MAX_LEN] = {};
+	__le32 le_cci;
+	u8 event, ack;
+	u8 len = 0;
+	int err = 0;
+	int ret;
+
+	guard(mutex)(&itepd->event_lock);
+
+	ret = itepd_read_reg(itepd, ITEPD_VENDOR_INT, &event, sizeof(event));
+	if (ret)
+		return ret;
+
+	event &= ITEPD_ALERT_VDM_EVENT | ITEPD_ALERT_UCSI_EVENT;
+	if (!event) {
+		mutex_lock(&itepd->received_lock);
+		*cci = itepd->cci;
+		mutex_unlock(&itepd->received_lock);
+		return ITEPD_EVENT_NONE;
+	}
+
+	if (event & ITEPD_ALERT_UCSI_EVENT) {
+		err = itepd_read_reg(itepd, ITEPD_UCSI_CCI_REG, &le_cci,
+				     sizeof(le_cci));
+		if (!err) {
+			*cci = le32_to_cpu(le_cci);
+			len = min_t(u8, ucsi_itepd_get_len(*cci),
+				    sizeof(msg_in));
+			if (len)
+				err = itepd_read_reg(itepd,
+						     ITEPD_UCSI_MSG_IN_REG,
+						     msg_in, len);
+		}
+	}
+
+	ack = event;
+	ret = itepd_write_reg(itepd, ITEPD_VENDOR_WC_INT, &ack, sizeof(ack));
+	if (ret)
+		return ret;
+
+	if (err)
+		return err;
+
+	if (event & ITEPD_ALERT_UCSI_EVENT) {
+		mutex_lock(&itepd->received_lock);
+		itepd->cci = *cci;
+		memset(itepd->msg_in, 0, sizeof(itepd->msg_in));
+		memcpy(itepd->msg_in, msg_in, len);
+		mutex_unlock(&itepd->received_lock);
+		return ITEPD_EVENT_UCSI;
+	}
+
+	mutex_lock(&itepd->received_lock);
+	*cci = itepd->cci;
+	mutex_unlock(&itepd->received_lock);
+
+	return ITEPD_EVENT_VDM;
+}
+
+static int ucsi_itepd_read_version(struct ucsi *ucsi, u16 *version)
+{
+	struct itepd *itepd = ucsi_get_drvdata(ucsi);
+	__le16 le_version;
+	int ret;
+
+	ret = itepd_read_reg(itepd, ITEPD_UCSI_VERSION_REG, &le_version,
+			     sizeof(le_version));
+	if (ret)
+		return ret;
+
+	*version = le16_to_cpu(le_version);
+
+	return 0;
+}
+
+static int ucsi_itepd_read_cci(struct ucsi *ucsi, u32 *cci)
+{
+	struct itepd *itepd = ucsi_get_drvdata(ucsi);
+
+	guard(mutex)(&itepd->received_lock);
+	*cci = itepd->cci;
+
+	return 0;
+}
+
+static int ucsi_itepd_poll_cci(struct ucsi *ucsi, u32 *cci)
+{
+	struct itepd *itepd = ucsi_get_drvdata(ucsi);
+	int ret;
+
+	ret = itepd_process_event(itepd, cci);
+	return ret < 0 ? ret : 0;
+}
+
+static int ucsi_itepd_read_message_in(struct ucsi *ucsi, void *val, size_t val_len)
+{
+	struct itepd *itepd = ucsi_get_drvdata(ucsi);
+
+	guard(mutex)(&itepd->received_lock);
+	memcpy(val, itepd->msg_in, min(val_len, sizeof(itepd->msg_in)));
+
+	return 0;
+}
+
+static int ucsi_itepd_async_control(struct ucsi *ucsi, u64 command)
+{
+	struct itepd *itepd = ucsi_get_drvdata(ucsi);
+	__le64 le_cmd = cpu_to_le64(command);
+
+	if (UCSI_COMMAND(command) == UCSI_PPM_RESET) {
+		mutex_lock(&itepd->received_lock);
+		itepd->cci = 0;
+		mutex_unlock(&itepd->received_lock);
+	}
+
+	return itepd_write_reg(itepd, ITEPD_UCSI_CONTROL_REG, &le_cmd,
+			       sizeof(le_cmd));
+}
+
+static const struct ucsi_operations ucsi_itepd_ops = {
+	.read_version		= ucsi_itepd_read_version,
+	.read_cci		= ucsi_itepd_read_cci,
+	.poll_cci		= ucsi_itepd_poll_cci,
+	.read_message_in	= ucsi_itepd_read_message_in,
+	.sync_control		= ucsi_sync_control_common,
+	.async_control		= ucsi_itepd_async_control,
+};
+
+static irqreturn_t itepd_irq_process(struct itepd *itepd)
+{
+	u32 cci;
+	int ret;
+
+	ret = itepd_process_event(itepd, &cci);
+	if (ret == ITEPD_EVENT_NONE)
+		return IRQ_NONE;
+
+	if (ret < 0)
+		return IRQ_HANDLED;
+
+	if (ret == ITEPD_EVENT_UCSI)
+		ucsi_notify_common(itepd->ucsi, cci);
+
+	return IRQ_HANDLED;
+}
+
+static irqreturn_t itepd_irq_thread_fn(int irq, void *data)
+{
+	struct itepd *itepd = data;
+
+	return itepd_irq_process(itepd);
+}
+
+static int itepd_probe(struct i2c_client *client)
+{
+	struct device *dev = &client->dev;
+	struct itepd *itepd;
+	u32 cci;
+	int ret;
+
+	if (client->irq <= 0)
+		return dev_err_probe(dev, -ENODEV, "no IRQ provided\n");
+
+	itepd = devm_kzalloc(dev, sizeof(*itepd), GFP_KERNEL);
+	if (!itepd)
+		return -ENOMEM;
+
+	itepd->client = client;
+	mutex_init(&itepd->i2c_lock);
+	mutex_init(&itepd->event_lock);
+	mutex_init(&itepd->received_lock);
+	i2c_set_clientdata(client, itepd);
+
+	itepd->ucsi = ucsi_create(dev, &ucsi_itepd_ops);
+	if (IS_ERR(itepd->ucsi))
+		return dev_err_probe(dev, PTR_ERR(itepd->ucsi),
+				     "ucsi_create failed\n");
+
+	ucsi_set_drvdata(itepd->ucsi, itepd);
+
+	ret = request_threaded_irq(client->irq, NULL, itepd_irq_thread_fn,
+				   IRQF_ONESHOT, dev_name(dev), itepd);
+	if (ret) {
+		dev_err_probe(dev, ret, "request_threaded_irq failed\n");
+		goto out_ucsi_destroy;
+	}
+
+	ret = itepd_process_event(itepd, &cci);
+	if (ret < 0)
+		dev_warn(dev, "initial event processing failed: %d\n", ret);
+
+	ret = ucsi_register(itepd->ucsi);
+	if (ret) {
+		dev_err_probe(dev, ret, "failed to register UCSI\n");
+		goto out_free_irq;
+	}
+
+	return 0;
+
+out_free_irq:
+	free_irq(client->irq, itepd);
+out_ucsi_destroy:
+	ucsi_destroy(itepd->ucsi);
+	return ret;
+}
+
+static void itepd_remove(struct i2c_client *client)
+{
+	struct itepd *itepd = i2c_get_clientdata(client);
+
+	ucsi_unregister(itepd->ucsi);
+	free_irq(client->irq, itepd);
+	ucsi_destroy(itepd->ucsi);
+}
+
+static const struct of_device_id itepd_of_match_table[] = {
+	{ .compatible = "ite,it8851" },
+	{}
+};
+MODULE_DEVICE_TABLE(of, itepd_of_match_table);
+
+static const struct i2c_device_id itepd_id_table[] = {
+	{ "ucsi_itepd", 0 },
+	{}
+};
+MODULE_DEVICE_TABLE(i2c, itepd_id_table);
+
+static struct i2c_driver itepd_driver = {
+	.driver = {
+		.name = "ucsi_itepd",
+		.of_match_table = itepd_of_match_table,
+	},
+	.probe = itepd_probe,
+	.remove = itepd_remove,
+	.id_table = itepd_id_table,
+};
+module_i2c_driver(itepd_driver);
+
+MODULE_AUTHOR("Jeson Yang <jeson.yang@ite.com.tw>");
+MODULE_DESCRIPTION("UCSI driver for ITE IT8851 and IT8853 Type-C PD controllers");
+MODULE_LICENSE("GPL");

-- 
2.53.0

Re: [PATCH v7 0/2] usb: typec: ucsi: Add ITE IT8851/IT8853 support

[Heikki Krogerus]

On Fri, Aug 07, 2026 at 06:17:44PM +0800, Amber Kao wrote:
> This series adds Device Tree bindings and minimal UCSI driver support 
> for the ITE IT8851/IT8853 USB Type-C Power Delivery controller over I2C.
> 
> Changes in v7:
> - dt-bindings: define 'reg' for the connector@[01] nodes, since a
>   unit-address requires a 'reg' property.
> - dt-bindings: dropped Krzysztof's Reviewed-by tag due to the above
>   change.
> - ucsi_itepd: use guard(mutex) in itepd_process_event(),
>   ucsi_itepd_read_cci() and ucsi_itepd_read_message_in().
> - ucsi_itepd: kept request_threaded_irq() instead of
>   devm_request_threaded_irq(). ucsi_destroy() is not devres-managed and
>   runs inside remove(), while a devm IRQ is only released after remove()
>   has returned; an interrupt in that window would call
>   ucsi_notify_common() on an already destroyed ucsi instance.

Why are you answering questions here in the changelog instead of the
thread where they were originally asked?

Changelog should really only list the things that were change.

Thanks,

-- 
heikki

Re: [PATCH v7 2/2] usb: typec: ucsi: Add ITE IT8851/IT8853 Type-C PD controller driver

[Heikki Krogerus]

On Fri, Aug 07, 2026 at 06:17:46PM +0800, Amber Kao wrote:
> Add a UCSI driver for the ITE IT8851 and IT8853 I2C-based USB Type-C
> Power Delivery controllers.
> The controller signals UCSI through a shared interrupt line; events are
> read and acknowledged via vendor-specific registers, and
> UCSI events are forwarded to the UCSI core.
> 
> Add the driver file to the MAINTAINERS entry.
> 
> Cc: Yaode Fang <Yaode.Fang@ite.com.tw>
> Cc: Jeson Yang <jeson.yang@ite.com.tw>
> Cc: Bling Chiang <Bling.Chiang@ite.com.tw>
> Cc: Eric Su <Eric.Su@ite.com.tw>
> Cc: Doreen Lin <doreen.lin@ite.com.tw>
> Signed-off-by: Amber Kao <amber.kao@ite.com.tw>

Reviewed-by: Heikki Krogerus <heikki.krogerus@linux.intel.com>

> ---
>  MAINTAINERS                         |   1 +
>  drivers/usb/typec/ucsi/Kconfig      |  10 +
>  drivers/usb/typec/ucsi/Makefile     |   1 +
>  drivers/usb/typec/ucsi/ucsi_itepd.c | 356 ++++++++++++++++++++++++++++++++++++
>  4 files changed, 368 insertions(+)
> 
> diff --git a/MAINTAINERS b/MAINTAINERS
> index ec0eeea79b9e..1e76e299e6c3 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -13727,6 +13727,7 @@ R:	Yaode Fang <Yaode.Fang@ite.com.tw>
>  L:	linux-usb@vger.kernel.org
>  S:	Maintained
>  F:	Documentation/devicetree/bindings/usb/ite,it8851.yaml
> +F:	drivers/usb/typec/ucsi/ucsi_itepd.c
>  
>  IVTV VIDEO4LINUX DRIVER
>  M:	Andy Walls <awalls@md.metrocast.net>
> diff --git a/drivers/usb/typec/ucsi/Kconfig b/drivers/usb/typec/ucsi/Kconfig
> index 87dd992a4b9e..0f10dac9b34b 100644
> --- a/drivers/usb/typec/ucsi/Kconfig
> +++ b/drivers/usb/typec/ucsi/Kconfig
> @@ -104,4 +104,14 @@ config UCSI_HUAWEI_GAOKUN
>  	  To compile the driver as a module, choose M here: the module will be
>  	  called ucsi_huawei_gaokun.
>  
> +config UCSI_ITEPD
> +	tristate "UCSI Interface Driver for ITE IT8851/IT8853"
> +	depends on I2C
> +	help
> +	  This driver enables UCSI support on platforms that expose an
> +	  ITE IT8851/IT8853 Type-C Power Delivery controller over an I2C interface.
> +
> +	  To compile the driver as a module, choose M here: the module
> +	  will be called ucsi_itepd.
> +
>  endif
> diff --git a/drivers/usb/typec/ucsi/Makefile b/drivers/usb/typec/ucsi/Makefile
> index c7e38bf01350..0903a1fd486b 100644
> --- a/drivers/usb/typec/ucsi/Makefile
> +++ b/drivers/usb/typec/ucsi/Makefile
> @@ -28,3 +28,4 @@ obj-$(CONFIG_UCSI_PMIC_GLINK)		+= ucsi_glink.o
>  obj-$(CONFIG_CROS_EC_UCSI)		+= cros_ec_ucsi.o
>  obj-$(CONFIG_UCSI_LENOVO_YOGA_C630)	+= ucsi_yoga_c630.o
>  obj-$(CONFIG_UCSI_HUAWEI_GAOKUN)	+= ucsi_huawei_gaokun.o
> +obj-$(CONFIG_UCSI_ITEPD)		+= ucsi_itepd.o
> diff --git a/drivers/usb/typec/ucsi/ucsi_itepd.c b/drivers/usb/typec/ucsi/ucsi_itepd.c
> new file mode 100644
> index 000000000000..d1887435a2e1
> --- /dev/null
> +++ b/drivers/usb/typec/ucsi/ucsi_itepd.c
> @@ -0,0 +1,356 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Copyright (C) 2025-2026, ITE. All Rights Reserved
> + *
> + */
> +#include <linux/bits.h>
> +#include <linux/err.h>
> +#include <linux/i2c.h>
> +#include <linux/interrupt.h>
> +#include <linux/module.h>
> +#include <linux/mutex.h>
> +#include <linux/slab.h>
> +#include <linux/unaligned.h>
> +
> +#include "ucsi.h"
> +
> +#define ITEPD_UCSI_VERSION_REG	0x80
> +#define ITEPD_UCSI_CCI_REG	0x84
> +#define ITEPD_UCSI_MSG_IN_REG	0x88
> +#define ITEPD_UCSI_CONTROL_REG	0x98
> +
> +#define ITEPD_VENDOR_WC_INT	0xbc
> +#define ITEPD_VENDOR_INT	0xbd
> +#define ITEPD_ALERT_VDM_EVENT	BIT(0)
> +#define ITEPD_ALERT_UCSI_EVENT	BIT(1)
> +
> +#define ITEPD_MSG_IN_MAX_LEN	0x28
> +
> +#define ITEPD_EVENT_NONE	0
> +#define ITEPD_EVENT_UCSI	1
> +#define ITEPD_EVENT_VDM		2
> +
> +struct itepd {
> +	struct i2c_client *client;
> +	struct ucsi *ucsi;
> +	struct mutex i2c_lock;		/* Serializes I2C accesses */
> +	struct mutex event_lock;	/* Serializes event processing (IRQ vs poll) */
> +	struct mutex received_lock;	/* Protects cci and msg_in */
> +	u8 msg_in[ITEPD_MSG_IN_MAX_LEN];
> +	u32 cci;
> +};
> +
> +static u8 ucsi_itepd_get_len(u32 cci)
> +{
> +	if (cci & UCSI_CCI_COMMAND_COMPLETE)
> +		return UCSI_CCI_LENGTH(cci);
> +	return 0;
> +}
> +
> +static int itepd_read_reg(struct itepd *itepd, u8 reg, void *data, u32 len)
> +{
> +	struct i2c_client *client = itepd->client;
> +	struct i2c_msg msg[2] = {
> +		{
> +			.addr	= client->addr,
> +			.flags	= 0,
> +			.len	= 1,
> +			.buf	= &reg,
> +		},
> +		{
> +			.addr	= client->addr,
> +			.flags	= I2C_M_RD,
> +			.len	= len,
> +			.buf	= data,
> +		}
> +
> +	};
> +	int ret;
> +
> +	mutex_lock(&itepd->i2c_lock);
> +	ret = i2c_transfer(client->adapter, msg, ARRAY_SIZE(msg));
> +	mutex_unlock(&itepd->i2c_lock);
> +	if (ret < 0) {
> +		dev_err_ratelimited(&client->dev, "reg 0x%02x read failed: %d\n",
> +				    reg, ret);
> +		return ret;
> +	}
> +
> +	return ret == ARRAY_SIZE(msg) ? 0 : -EIO;
> +}
> +
> +static int itepd_write_reg(struct itepd *itepd, u8 reg, const void *data, u32 len)
> +{
> +	struct i2c_client *client = itepd->client;
> +	u8 buf[sizeof(u64) + 1];
> +	struct i2c_msg msg[1] = {
> +		{
> +			.addr	= client->addr,
> +			.flags	= 0,
> +			.len	= len + 1,
> +			.buf	= buf,
> +		}
> +	};
> +	int ret;
> +
> +	if (len > sizeof(buf) - 1)
> +		return -EINVAL;
> +
> +	buf[0] = reg;
> +	memcpy(&buf[1], data, len);
> +
> +	mutex_lock(&itepd->i2c_lock);
> +	ret = i2c_transfer(client->adapter, msg, 1);
> +	mutex_unlock(&itepd->i2c_lock);
> +	if (ret < 0) {
> +		dev_err_ratelimited(&client->dev, "reg 0x%02x write failed: %d\n",
> +				    reg, ret);
> +		return ret;
> +	}
> +
> +	return ret == 1 ? 0 : -EIO;
> +}
> +
> +static int itepd_process_event(struct itepd *itepd, u32 *cci)
> +{
> +	u8 msg_in[ITEPD_MSG_IN_MAX_LEN] = {};
> +	__le32 le_cci;
> +	u8 event, ack;
> +	u8 len = 0;
> +	int err = 0;
> +	int ret;
> +
> +	guard(mutex)(&itepd->event_lock);
> +
> +	ret = itepd_read_reg(itepd, ITEPD_VENDOR_INT, &event, sizeof(event));
> +	if (ret)
> +		return ret;
> +
> +	event &= ITEPD_ALERT_VDM_EVENT | ITEPD_ALERT_UCSI_EVENT;
> +	if (!event) {
> +		mutex_lock(&itepd->received_lock);
> +		*cci = itepd->cci;
> +		mutex_unlock(&itepd->received_lock);
> +		return ITEPD_EVENT_NONE;
> +	}
> +
> +	if (event & ITEPD_ALERT_UCSI_EVENT) {
> +		err = itepd_read_reg(itepd, ITEPD_UCSI_CCI_REG, &le_cci,
> +				     sizeof(le_cci));
> +		if (!err) {
> +			*cci = le32_to_cpu(le_cci);
> +			len = min_t(u8, ucsi_itepd_get_len(*cci),
> +				    sizeof(msg_in));
> +			if (len)
> +				err = itepd_read_reg(itepd,
> +						     ITEPD_UCSI_MSG_IN_REG,
> +						     msg_in, len);
> +		}
> +	}
> +
> +	ack = event;
> +	ret = itepd_write_reg(itepd, ITEPD_VENDOR_WC_INT, &ack, sizeof(ack));
> +	if (ret)
> +		return ret;
> +
> +	if (err)
> +		return err;
> +
> +	if (event & ITEPD_ALERT_UCSI_EVENT) {
> +		mutex_lock(&itepd->received_lock);
> +		itepd->cci = *cci;
> +		memset(itepd->msg_in, 0, sizeof(itepd->msg_in));
> +		memcpy(itepd->msg_in, msg_in, len);
> +		mutex_unlock(&itepd->received_lock);
> +		return ITEPD_EVENT_UCSI;
> +	}
> +
> +	mutex_lock(&itepd->received_lock);
> +	*cci = itepd->cci;
> +	mutex_unlock(&itepd->received_lock);
> +
> +	return ITEPD_EVENT_VDM;
> +}
> +
> +static int ucsi_itepd_read_version(struct ucsi *ucsi, u16 *version)
> +{
> +	struct itepd *itepd = ucsi_get_drvdata(ucsi);
> +	__le16 le_version;
> +	int ret;
> +
> +	ret = itepd_read_reg(itepd, ITEPD_UCSI_VERSION_REG, &le_version,
> +			     sizeof(le_version));
> +	if (ret)
> +		return ret;
> +
> +	*version = le16_to_cpu(le_version);
> +
> +	return 0;
> +}
> +
> +static int ucsi_itepd_read_cci(struct ucsi *ucsi, u32 *cci)
> +{
> +	struct itepd *itepd = ucsi_get_drvdata(ucsi);
> +
> +	guard(mutex)(&itepd->received_lock);
> +	*cci = itepd->cci;
> +
> +	return 0;
> +}
> +
> +static int ucsi_itepd_poll_cci(struct ucsi *ucsi, u32 *cci)
> +{
> +	struct itepd *itepd = ucsi_get_drvdata(ucsi);
> +	int ret;
> +
> +	ret = itepd_process_event(itepd, cci);
> +	return ret < 0 ? ret : 0;
> +}
> +
> +static int ucsi_itepd_read_message_in(struct ucsi *ucsi, void *val, size_t val_len)
> +{
> +	struct itepd *itepd = ucsi_get_drvdata(ucsi);
> +
> +	guard(mutex)(&itepd->received_lock);
> +	memcpy(val, itepd->msg_in, min(val_len, sizeof(itepd->msg_in)));
> +
> +	return 0;
> +}
> +
> +static int ucsi_itepd_async_control(struct ucsi *ucsi, u64 command)
> +{
> +	struct itepd *itepd = ucsi_get_drvdata(ucsi);
> +	__le64 le_cmd = cpu_to_le64(command);
> +
> +	if (UCSI_COMMAND(command) == UCSI_PPM_RESET) {
> +		mutex_lock(&itepd->received_lock);
> +		itepd->cci = 0;
> +		mutex_unlock(&itepd->received_lock);
> +	}
> +
> +	return itepd_write_reg(itepd, ITEPD_UCSI_CONTROL_REG, &le_cmd,
> +			       sizeof(le_cmd));
> +}
> +
> +static const struct ucsi_operations ucsi_itepd_ops = {
> +	.read_version		= ucsi_itepd_read_version,
> +	.read_cci		= ucsi_itepd_read_cci,
> +	.poll_cci		= ucsi_itepd_poll_cci,
> +	.read_message_in	= ucsi_itepd_read_message_in,
> +	.sync_control		= ucsi_sync_control_common,
> +	.async_control		= ucsi_itepd_async_control,
> +};
> +
> +static irqreturn_t itepd_irq_process(struct itepd *itepd)
> +{
> +	u32 cci;
> +	int ret;
> +
> +	ret = itepd_process_event(itepd, &cci);
> +	if (ret == ITEPD_EVENT_NONE)
> +		return IRQ_NONE;
> +
> +	if (ret < 0)
> +		return IRQ_HANDLED;
> +
> +	if (ret == ITEPD_EVENT_UCSI)
> +		ucsi_notify_common(itepd->ucsi, cci);
> +
> +	return IRQ_HANDLED;
> +}
> +
> +static irqreturn_t itepd_irq_thread_fn(int irq, void *data)
> +{
> +	struct itepd *itepd = data;
> +
> +	return itepd_irq_process(itepd);
> +}
> +
> +static int itepd_probe(struct i2c_client *client)
> +{
> +	struct device *dev = &client->dev;
> +	struct itepd *itepd;
> +	u32 cci;
> +	int ret;
> +
> +	if (client->irq <= 0)
> +		return dev_err_probe(dev, -ENODEV, "no IRQ provided\n");
> +
> +	itepd = devm_kzalloc(dev, sizeof(*itepd), GFP_KERNEL);
> +	if (!itepd)
> +		return -ENOMEM;
> +
> +	itepd->client = client;
> +	mutex_init(&itepd->i2c_lock);
> +	mutex_init(&itepd->event_lock);
> +	mutex_init(&itepd->received_lock);
> +	i2c_set_clientdata(client, itepd);
> +
> +	itepd->ucsi = ucsi_create(dev, &ucsi_itepd_ops);
> +	if (IS_ERR(itepd->ucsi))
> +		return dev_err_probe(dev, PTR_ERR(itepd->ucsi),
> +				     "ucsi_create failed\n");
> +
> +	ucsi_set_drvdata(itepd->ucsi, itepd);
> +
> +	ret = request_threaded_irq(client->irq, NULL, itepd_irq_thread_fn,
> +				   IRQF_ONESHOT, dev_name(dev), itepd);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "request_threaded_irq failed\n");
> +		goto out_ucsi_destroy;
> +	}
> +
> +	ret = itepd_process_event(itepd, &cci);
> +	if (ret < 0)
> +		dev_warn(dev, "initial event processing failed: %d\n", ret);
> +
> +	ret = ucsi_register(itepd->ucsi);
> +	if (ret) {
> +		dev_err_probe(dev, ret, "failed to register UCSI\n");
> +		goto out_free_irq;
> +	}
> +
> +	return 0;
> +
> +out_free_irq:
> +	free_irq(client->irq, itepd);
> +out_ucsi_destroy:
> +	ucsi_destroy(itepd->ucsi);
> +	return ret;
> +}
> +
> +static void itepd_remove(struct i2c_client *client)
> +{
> +	struct itepd *itepd = i2c_get_clientdata(client);
> +
> +	ucsi_unregister(itepd->ucsi);
> +	free_irq(client->irq, itepd);
> +	ucsi_destroy(itepd->ucsi);
> +}
> +
> +static const struct of_device_id itepd_of_match_table[] = {
> +	{ .compatible = "ite,it8851" },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(of, itepd_of_match_table);
> +
> +static const struct i2c_device_id itepd_id_table[] = {
> +	{ "ucsi_itepd", 0 },
> +	{}
> +};
> +MODULE_DEVICE_TABLE(i2c, itepd_id_table);
> +
> +static struct i2c_driver itepd_driver = {
> +	.driver = {
> +		.name = "ucsi_itepd",
> +		.of_match_table = itepd_of_match_table,
> +	},
> +	.probe = itepd_probe,
> +	.remove = itepd_remove,
> +	.id_table = itepd_id_table,
> +};
> +module_i2c_driver(itepd_driver);
> +
> +MODULE_AUTHOR("Jeson Yang <jeson.yang@ite.com.tw>");
> +MODULE_DESCRIPTION("UCSI driver for ITE IT8851 and IT8853 Type-C PD controllers");
> +MODULE_LICENSE("GPL");
> 
> -- 
> 2.53.0

-- 
heikki