[PATCH] dt-bindings: thermal: Correct indentation and style in DTS example

[PATCH] dt-bindings: thermal: Correct indentation and style in DTS example

[Krzysztof Kozlowski]

DTS example in the bindings should be indented with 2- or 4-spaces and
aligned with opening '- |', so correct any differences like 3-spaces or
mixtures 2- and 4-spaces in one binding.

No functional changes here, but saves some comments during reviews of
new patches built on existing code.

Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
---
 .../thermal/allwinner,sun8i-a83t-ths.yaml     | 48 +++++++++----------
 .../bindings/thermal/imx-thermal.yaml         | 36 +++++++-------
 .../bindings/thermal/imx8mm-thermal.yaml      |  8 ++--
 3 files changed, 46 insertions(+), 46 deletions(-)

diff --git a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
index dad8de900495..3e61689f6dd4 100644
--- a/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
+++ b/Documentation/devicetree/bindings/thermal/allwinner,sun8i-a83t-ths.yaml
@@ -142,38 +142,38 @@ unevaluatedProperties: false
 examples:
   - |
     thermal-sensor@1f04000 {
-         compatible = "allwinner,sun8i-a83t-ths";
-         reg = <0x01f04000 0x100>;
-         interrupts = <0 31 0>;
-         nvmem-cells = <&ths_calibration>;
-         nvmem-cell-names = "calibration";
-         #thermal-sensor-cells = <1>;
+        compatible = "allwinner,sun8i-a83t-ths";
+        reg = <0x01f04000 0x100>;
+        interrupts = <0 31 0>;
+        nvmem-cells = <&ths_calibration>;
+        nvmem-cell-names = "calibration";
+        #thermal-sensor-cells = <1>;
     };
 
   - |
     thermal-sensor@1c25000 {
-         compatible = "allwinner,sun8i-h3-ths";
-         reg = <0x01c25000 0x400>;
-         clocks = <&ccu 0>, <&ccu 1>;
-         clock-names = "bus", "mod";
-         resets = <&ccu 2>;
-         interrupts = <0 31 0>;
-         nvmem-cells = <&ths_calibration>;
-         nvmem-cell-names = "calibration";
-         #thermal-sensor-cells = <0>;
+        compatible = "allwinner,sun8i-h3-ths";
+        reg = <0x01c25000 0x400>;
+        clocks = <&ccu 0>, <&ccu 1>;
+        clock-names = "bus", "mod";
+        resets = <&ccu 2>;
+        interrupts = <0 31 0>;
+        nvmem-cells = <&ths_calibration>;
+        nvmem-cell-names = "calibration";
+        #thermal-sensor-cells = <0>;
     };
 
   - |
     thermal-sensor@5070400 {
-         compatible = "allwinner,sun50i-h6-ths";
-         reg = <0x05070400 0x100>;
-         clocks = <&ccu 0>;
-         clock-names = "bus";
-         resets = <&ccu 2>;
-         interrupts = <0 15 0>;
-         nvmem-cells = <&ths_calibration>;
-         nvmem-cell-names = "calibration";
-         #thermal-sensor-cells = <1>;
+        compatible = "allwinner,sun50i-h6-ths";
+        reg = <0x05070400 0x100>;
+        clocks = <&ccu 0>;
+        clock-names = "bus";
+        resets = <&ccu 2>;
+        interrupts = <0 15 0>;
+        nvmem-cells = <&ths_calibration>;
+        nvmem-cell-names = "calibration";
+        #thermal-sensor-cells = <1>;
     };
 
 ...
diff --git a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
index 337560562337..949b154856c5 100644
--- a/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx-thermal.yaml
@@ -80,19 +80,19 @@ examples:
     #include <dt-bindings/interrupt-controller/arm-gic.h>
 
     efuse@21bc000 {
-         #address-cells = <1>;
-         #size-cells = <1>;
-         compatible = "fsl,imx6sx-ocotp", "syscon";
-         reg = <0x021bc000 0x4000>;
-         clocks = <&clks IMX6SX_CLK_OCOTP>;
+        #address-cells = <1>;
+        #size-cells = <1>;
+        compatible = "fsl,imx6sx-ocotp", "syscon";
+        reg = <0x021bc000 0x4000>;
+        clocks = <&clks IMX6SX_CLK_OCOTP>;
 
-         tempmon_calib: calib@38 {
-             reg = <0x38 4>;
-         };
+        tempmon_calib: calib@38 {
+            reg = <0x38 4>;
+        };
 
-         tempmon_temp_grade: temp-grade@20 {
-             reg = <0x20 4>;
-         };
+        tempmon_temp_grade: temp-grade@20 {
+            reg = <0x20 4>;
+        };
     };
 
     anatop@20c8000 {
@@ -103,12 +103,12 @@ examples:
                      <0 127 IRQ_TYPE_LEVEL_HIGH>;
 
         tempmon {
-             compatible = "fsl,imx6sx-tempmon";
-             interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
-             fsl,tempmon = <&anatop>;
-             nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
-             nvmem-cell-names = "calib", "temp_grade";
-             clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
-             #thermal-sensor-cells = <0>;
+            compatible = "fsl,imx6sx-tempmon";
+            interrupts = <GIC_SPI 49 IRQ_TYPE_LEVEL_HIGH>;
+            fsl,tempmon = <&anatop>;
+            nvmem-cells = <&tempmon_calib>, <&tempmon_temp_grade>;
+            nvmem-cell-names = "calib", "temp_grade";
+            clocks = <&clks IMX6SX_CLK_PLL3_USB_OTG>;
+            #thermal-sensor-cells = <0>;
         };
     };
diff --git a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
index bef0e95e7416..df6c7c5d519f 100644
--- a/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
+++ b/Documentation/devicetree/bindings/thermal/imx8mm-thermal.yaml
@@ -63,10 +63,10 @@ examples:
     #include <dt-bindings/clock/imx8mm-clock.h>
 
     thermal-sensor@30260000 {
-         compatible = "fsl,imx8mm-tmu";
-         reg = <0x30260000 0x10000>;
-         clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
-         #thermal-sensor-cells = <0>;
+        compatible = "fsl,imx8mm-tmu";
+        reg = <0x30260000 0x10000>;
+        clocks = <&clk IMX8MM_CLK_TMU_ROOT>;
+        #thermal-sensor-cells = <0>;
     };
 
 ...
-- 
2.43.0

Re: [PATCH] dt-bindings: thermal: Correct indentation and style in DTS example

[Rob Herring (Arm)]

On Tue, 07 Jan 2025 14:10:26 +0100, Krzysztof Kozlowski wrote:
> DTS example in the bindings should be indented with 2- or 4-spaces and
> aligned with opening '- |', so correct any differences like 3-spaces or
> mixtures 2- and 4-spaces in one binding.
> 
> No functional changes here, but saves some comments during reviews of
> new patches built on existing code.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../thermal/allwinner,sun8i-a83t-ths.yaml     | 48 +++++++++----------
>  .../bindings/thermal/imx-thermal.yaml         | 36 +++++++-------
>  .../bindings/thermal/imx8mm-thermal.yaml      |  8 ++--
>  3 files changed, 46 insertions(+), 46 deletions(-)
> 

Acked-by: Rob Herring (Arm) <robh@kernel.org>

Re: [PATCH] dt-bindings: thermal: Correct indentation and style in DTS example

[Chen-Yu Tsai]

On Tue, Jan 7, 2025 at 9:10 PM Krzysztof Kozlowski
<krzysztof.kozlowski@linaro.org> wrote:
>
> DTS example in the bindings should be indented with 2- or 4-spaces and
> aligned with opening '- |', so correct any differences like 3-spaces or
> mixtures 2- and 4-spaces in one binding.
>
> No functional changes here, but saves some comments during reviews of
> new patches built on existing code.
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---
>  .../thermal/allwinner,sun8i-a83t-ths.yaml     | 48 +++++++++----------

Acked-by: Chen-Yu Tsai <wens@csie.org>

Re: [PATCH] dt-bindings: thermal: Correct indentation and style in DTS example

[Daniel Lezcano]

On 07/01/2025 14:10, Krzysztof Kozlowski wrote:
> DTS example in the bindings should be indented with 2- or 4-spaces and
> aligned with opening '- |', so correct any differences like 3-spaces or
> mixtures 2- and 4-spaces in one binding.
> 
> No functional changes here, but saves some comments during reviews of
> new patches built on existing code.
> 
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@linaro.org>
> ---

Applied, thanks

   -- D.

-- 
<http://www.linaro.org/> Linaro.org │ Open source software for ARM SoCs

Follow Linaro:  <http://www.facebook.com/pages/Linaro> Facebook |
<http://twitter.com/#!/linaroorg> Twitter |
<http://www.linaro.org/linaro-blog/> Blog