[PATCH 0/2] rtq9128: Fix pm runtime and TDM usage

[PATCH 0/2] rtq9128: Fix pm runtime and TDM usage

[cy_huang]

From: ChiYuan Huang <cy_huang@richtek.com>

This patch series fix rtq9128 pm_runtime and TDM usage.

ChiYuan Huang (2):
  ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
  ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow

 sound/soc/codecs/rtq9128.c | 73 +++++++++++++++++++++-----------------
 1 file changed, 41 insertions(+), 32 deletions(-)


base-commit: ceb6a6f023fd3e8b07761ed900352ef574010bcb
-- 
2.34.1

[PATCH 1/2] ASoC: codecs: rtq9128: Fix PM_RUNTIME usage

[cy_huang]

From: ChiYuan Huang <cy_huang@richtek.com>

If 'pm_runtime_resume_and_get' is used, must check the return value to
prevent the active count not matched problem.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
 sound/soc/codecs/rtq9128.c | 6 +++++-
 1 file changed, 5 insertions(+), 1 deletion(-)

diff --git a/sound/soc/codecs/rtq9128.c b/sound/soc/codecs/rtq9128.c
index c22b047115cc..bda64f9eeb62 100644
--- a/sound/soc/codecs/rtq9128.c
+++ b/sound/soc/codecs/rtq9128.c
@@ -391,7 +391,11 @@ static int rtq9128_component_probe(struct snd_soc_component *comp)
 	unsigned int val;
 	int i, ret;
 
-	pm_runtime_resume_and_get(comp->dev);
+	ret = pm_runtime_resume_and_get(comp->dev);
+	if (ret < 0) {
+		dev_err(comp->dev, "Failed to resume device (%d)\n", ret);
+		return ret;
+	}
 
 	val = snd_soc_component_read(comp, RTQ9128_REG_EFUSE_DATA);
 
-- 
2.34.1

[PATCH 2/2] ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow

[cy_huang]

From: ChiYuan Huang <cy_huang@richtek.com>

To enable TDM mode, the current control flow limits the function
calling order should be 'set_tdm_slot->set_dai_fmt'. But not all
platform sound card like as simeple card to follow this design.
To bypass this limit, adjust the DAI format setting in runtime
'hw_param' callback.

Signed-off-by: ChiYuan Huang <cy_huang@richtek.com>
---
 sound/soc/codecs/rtq9128.c | 67 ++++++++++++++++++++------------------
 1 file changed, 36 insertions(+), 31 deletions(-)

diff --git a/sound/soc/codecs/rtq9128.c b/sound/soc/codecs/rtq9128.c
index bda64f9eeb62..aa3eadecd974 100644
--- a/sound/soc/codecs/rtq9128.c
+++ b/sound/soc/codecs/rtq9128.c
@@ -59,6 +59,7 @@
 
 struct rtq9128_data {
 	struct gpio_desc *enable;
+	unsigned int daifmt;
 	int tdm_slots;
 	int tdm_slot_width;
 	bool tdm_input_data2_select;
@@ -441,10 +442,7 @@ static const struct snd_soc_component_driver rtq9128_comp_driver = {
 static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 {
 	struct rtq9128_data *data = snd_soc_dai_get_drvdata(dai);
-	struct snd_soc_component *comp = dai->component;
 	struct device *dev = dai->dev;
-	unsigned int audfmt, fmtval;
-	int ret;
 
 	dev_dbg(dev, "%s: fmt 0x%8x\n", __func__, fmt);
 
@@ -454,35 +452,10 @@ static int rtq9128_dai_set_fmt(struct snd_soc_dai *dai, unsigned int fmt)
 		return -EINVAL;
 	}
 
-	fmtval = fmt & SND_SOC_DAIFMT_FORMAT_MASK;
-	if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) {
-		dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n");
-		return -EINVAL;
-	}
+	/* Store here and will be used in runtime hw_params for DAI format setting */
+	data->daifmt = fmt;
 
-	switch (fmtval) {
-	case SND_SOC_DAIFMT_I2S:
-		audfmt = 8;
-		break;
-	case SND_SOC_DAIFMT_LEFT_J:
-		audfmt = 9;
-		break;
-	case SND_SOC_DAIFMT_RIGHT_J:
-		audfmt = 10;
-		break;
-	case SND_SOC_DAIFMT_DSP_A:
-		audfmt = data->tdm_slots ? 12 : 11;
-		break;
-	case SND_SOC_DAIFMT_DSP_B:
-		audfmt = data->tdm_slots ? 4 : 3;
-		break;
-	default:
-		dev_err(dev, "Unsupported format 0x%8x\n", fmt);
-		return -EINVAL;
-	}
-
-	ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt);
-	return ret < 0 ? ret : 0;
+	return 0;
 }
 
 static int rtq9128_dai_set_tdm_slot(struct snd_soc_dai *dai, unsigned int tx_mask,
@@ -558,10 +531,38 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc
 	unsigned int width, slot_width, bitrate, audbit, dolen;
 	struct snd_soc_component *comp = dai->component;
 	struct device *dev = dai->dev;
+	unsigned int fmtval, audfmt;
 	int ret;
 
 	dev_dbg(dev, "%s: width %d\n", __func__, params_width(param));
 
+	fmtval = FIELD_GET(SND_SOC_DAIFMT_FORMAT_MASK, data->daifmt);
+	if (data->tdm_slots && fmtval != SND_SOC_DAIFMT_DSP_A && fmtval != SND_SOC_DAIFMT_DSP_B) {
+		dev_err(dev, "TDM is used, format only support DSP_A or DSP_B\n");
+		return -EINVAL;
+	}
+
+	switch (fmtval) {
+	case SND_SOC_DAIFMT_I2S:
+		audfmt = 8;
+		break;
+	case SND_SOC_DAIFMT_LEFT_J:
+		audfmt = 9;
+		break;
+	case SND_SOC_DAIFMT_RIGHT_J:
+		audfmt = 10;
+		break;
+	case SND_SOC_DAIFMT_DSP_A:
+		audfmt = data->tdm_slots ? 12 : 11;
+		break;
+	case SND_SOC_DAIFMT_DSP_B:
+		audfmt = data->tdm_slots ? 4 : 3;
+		break;
+	default:
+		dev_err(dev, "Unsupported format 0x%8x\n", fmtval);
+		return -EINVAL;
+	}
+
 	switch (width = params_width(param)) {
 	case 16:
 		audbit = 0;
@@ -615,6 +616,10 @@ static int rtq9128_dai_hw_params(struct snd_pcm_substream *stream, struct snd_pc
 		return -EINVAL;
 	}
 
+	ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDFMT_MASK, audfmt);
+	if (ret < 0)
+		return ret;
+
 	ret = snd_soc_component_write_field(comp, RTQ9128_REG_I2S_OPT, RTQ9128_AUDBIT_MASK, audbit);
 	if (ret < 0)
 		return ret;
-- 
2.34.1

Re: [PATCH 0/2] rtq9128: Fix pm runtime and TDM usage

[Mark Brown]

On Fri, 29 Dec 2023 09:46:00 +0800, cy_huang@richtek.com wrote:
> This patch series fix rtq9128 pm_runtime and TDM usage.
> 
> ChiYuan Huang (2):
>   ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
>   ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
> 
>  sound/soc/codecs/rtq9128.c | 73 +++++++++++++++++++++-----------------
>  1 file changed, 41 insertions(+), 32 deletions(-)
> 
> [...]

Applied to

   https://git.kernel.org/pub/scm/linux/kernel/git/broonie/sound.git for-next

Thanks!

[1/2] ASoC: codecs: rtq9128: Fix PM_RUNTIME usage
      commit: 35040410372ca27a33cec8382d42c90b6b6c99f6
[2/2] ASoC: codecs: rtq9128: Fix TDM enable and DAI format control flow
      commit: 415d10ccef712f3ec73cd880c1fef3eb48601c3a

All being well this means that it will be integrated into the linux-next
tree (usually sometime in the next 24 hours) and sent to Linus during
the next merge window (or sooner if it is a bug fix), however if
problems are discovered then the patch may be dropped or reverted.

You may get further e-mails resulting from automated or manual testing
and review of the tree, please engage with people reporting problems and
send followup patches addressing any issues that are reported if needed.

If any updates are required or you are submitting further changes they
should be sent as incremental updates against current git, existing
patches will not be replaced.

Please add any relevant lists and maintainers to the CCs when replying
to this mail.

Thanks,
Mark