* [PATCH net-next v2 1/2] dt-bindings: net: dsa: mediatek,mt7530: add econet,en7528-switch
2026-07-11 11:40 [PATCH net-next v2 0/2] net: dsa: mt7530: add EcoNet EN7528 built-in switch support Ahmed Naseef
@ 2026-07-11 11:41 ` Ahmed Naseef
2026-07-11 11:41 ` [PATCH net-next v2 2/2] net: dsa: mt7530: add EN7528 support Ahmed Naseef
1 sibling, 0 replies; 3+ messages in thread
From: Ahmed Naseef @ 2026-07-11 11:41 UTC (permalink / raw)
To: netdev
Cc: Arınç ÜNAL, Chester A. Unal, David S. Miller,
Andrew Lunn, AngeloGioacchino Del Regno, Conor Dooley,
DENG Qingfang, Daniel Golle, Eric Dumazet, Jakub Kicinski,
Krzysztof Kozlowski, Landen Chao, Matthias Brugger, Paolo Abeni,
Rob Herring, Russell King, Sean Wang, Vladimir Oltean, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, Ahmed Naseef
The EcoNet EN7528 MIPS SoC integrates an MT7530 Gigabit switch,
memory-mapped in the SoC register space like the built-in switches of
the MediaTek MT7988 and Airoha EN7581/AN7583 SoCs. Its four user ports
are connected to integrated Gigabit PHYs and its CPU port is connected
internally to the SoC Ethernet MAC.
Those three switches are MT7531-based, whereas the EN7528 has a genuine
MT7530 switch core (its chip revision register reads 0x7530). The two
generations differ in their register programming - for example the CPU
port is selected through the MT7530-style MFC register rather than the
MT7531 CFC register - so the EN7528 is not compatible with the existing
switch compatibles and cannot fall back to one of them.
Add the econet,en7528-switch compatible, with the same constraints as
the other built-in switches.
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
---
.../devicetree/bindings/net/dsa/mediatek,mt7530.yaml | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
index 815a90808901..90b3582b7619 100644
--- a/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
+++ b/Documentation/devicetree/bindings/net/dsa/mediatek,mt7530.yaml
@@ -100,6 +100,10 @@ properties:
Built-in switch of the Airoha AN7583 SoC
const: airoha,an7583-switch
+ - description:
+ Built-in switch of the EcoNet EN7528 SoC
+ const: econet,en7528-switch
+
reg:
maxItems: 1
@@ -318,6 +322,7 @@ allOf:
- mediatek,mt7988-switch
- airoha,en7581-switch
- airoha,an7583-switch
+ - econet,en7528-switch
then:
$ref: "#/$defs/builtin-dsa-port"
properties:
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread* [PATCH net-next v2 2/2] net: dsa: mt7530: add EN7528 support
2026-07-11 11:40 [PATCH net-next v2 0/2] net: dsa: mt7530: add EcoNet EN7528 built-in switch support Ahmed Naseef
2026-07-11 11:41 ` [PATCH net-next v2 1/2] dt-bindings: net: dsa: mediatek,mt7530: add econet,en7528-switch Ahmed Naseef
@ 2026-07-11 11:41 ` Ahmed Naseef
1 sibling, 0 replies; 3+ messages in thread
From: Ahmed Naseef @ 2026-07-11 11:41 UTC (permalink / raw)
To: netdev
Cc: Arınç ÜNAL, Chester A. Unal, David S. Miller,
Andrew Lunn, AngeloGioacchino Del Regno, Conor Dooley,
DENG Qingfang, Daniel Golle, Eric Dumazet, Jakub Kicinski,
Krzysztof Kozlowski, Landen Chao, Matthias Brugger, Paolo Abeni,
Rob Herring, Russell King, Sean Wang, Vladimir Oltean, devicetree,
linux-arm-kernel, linux-kernel, linux-mediatek, Ahmed Naseef
The EcoNet EN7528 SoC integrates an MT7530 switch (the chip revision
register reads 0x7530), memory-mapped in the SoC register space and
reached through the same MMIO glue used for the built-in switches of the
MediaTek MT7988 and Airoha EN7581/AN7583 SoCs. Its reset sequence and its
PHY indirect access registers are the same as on those switches, so add
an ID_EN7528 variant bound with the "econet,en7528-switch" compatible,
reusing mt7988_setup() and the indirect PHY accessors.
The switch core, however, is an MT7530 and not an MT7531 derivative: the
CPU port to trap frames to is set through the MT7530-style CPU_EN /
CPU_PORT fields of the MFC register rather than the MT7531 CFC register,
so add it to the MT7530 handling in mt753x_conduit_state_change(). For the
same reason the MT7530 mirror and force-mode register layouts already
apply to it as the default of the MT753X_*() macros.
The four user ports (1-4) are connected to integrated Gigabit PHYs at
MDIO addresses 9-12 of the switch internal MDIO bus. The CPU port (port
6) is connected to the SoC Ethernet MAC at a fixed 1000 Mbps full duplex
link, so the port capabilities cannot be shared with the MT7988 and
EN7581 switches, whose CPU ports run at 10 Gbps.
The LAN GPHYs advertise EEE by default, but negotiating EEE with some
link partners results in an unstable link with dropped frames. Leave the
LPI capabilities empty for the EN7528 so that phylink disables EEE on
these PHYs and refuses to enable it from userspace.
Signed-off-by: Ahmed Naseef <naseefkm@gmail.com>
---
drivers/net/dsa/mt7530-mmio.c | 1 +
drivers/net/dsa/mt7530.c | 58 ++++++++++++++++++++++++++++++-----
drivers/net/dsa/mt7530.h | 1 +
3 files changed, 52 insertions(+), 8 deletions(-)
diff --git a/drivers/net/dsa/mt7530-mmio.c b/drivers/net/dsa/mt7530-mmio.c
index 1dc8b93fb51a..1065671bcdd1 100644
--- a/drivers/net/dsa/mt7530-mmio.c
+++ b/drivers/net/dsa/mt7530-mmio.c
@@ -13,6 +13,7 @@
static const struct of_device_id mt7988_of_match[] = {
{ .compatible = "airoha,an7583-switch", .data = &mt753x_table[ID_AN7583], },
{ .compatible = "airoha,en7581-switch", .data = &mt753x_table[ID_EN7581], },
+ { .compatible = "econet,en7528-switch", .data = &mt753x_table[ID_EN7528], },
{ .compatible = "mediatek,mt7988-switch", .data = &mt753x_table[ID_MT7988], },
{ /* sentinel */ },
};
diff --git a/drivers/net/dsa/mt7530.c b/drivers/net/dsa/mt7530.c
index 3c2a3029b10c..6c8ed00ee9e7 100644
--- a/drivers/net/dsa/mt7530.c
+++ b/drivers/net/dsa/mt7530.c
@@ -2912,6 +2912,30 @@ static void en7581_mac_port_get_caps(struct dsa_switch *ds, int port,
}
}
+static void en7528_mac_port_get_caps(struct dsa_switch *ds, int port,
+ struct phylink_config *config)
+{
+ switch (port) {
+ /* Ports which are connected to switch PHYs. There is no MII pinout. */
+ case 1 ... 4:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+
+ config->mac_capabilities |= MAC_10 | MAC_100 | MAC_1000FD;
+ break;
+
+ /* Port 6 is connected to SoC's GMAC at 1000 Mbps full duplex. There
+ * is no MII pinout.
+ */
+ case 6:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+
+ config->mac_capabilities |= MAC_1000FD;
+ break;
+ }
+}
+
static void
mt7530_mac_config(struct dsa_switch *ds, int port, unsigned int mode,
phy_interface_t interface)
@@ -3101,17 +3125,24 @@ static void mt753x_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config)
{
struct mt7530_priv *priv = ds->priv;
- u32 eeecr;
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE;
- config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD;
-
- eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
- /* tx_lpi_timer should be in microseconds. The time units for
- * LPI threshold are unspecified.
+ /* The EN7528 GPHYs report EEE capability, but negotiating EEE with
+ * common link partners (e.g. Realtek GbE NICs) results in an unstable
+ * link with dropped frames. Leave the LPI capabilities empty so that
+ * phylink disables EEE on these PHYs and refuses to enable it from
+ * userspace.
*/
- config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr);
+ if (priv->id != ID_EN7528) {
+ u32 eeecr = mt7530_read(priv, MT753X_PMEEECR_P(port));
+
+ config->lpi_capabilities = MAC_100FD | MAC_1000FD | MAC_2500FD;
+ /* tx_lpi_timer should be in microseconds. The time units for
+ * LPI threshold are unspecified.
+ */
+ config->lpi_timer_default = FIELD_GET(LPI_THRESH_MASK, eeecr);
+ }
priv->info->mac_port_get_caps(ds, port, config);
}
@@ -3254,7 +3285,8 @@ mt753x_conduit_state_change(struct dsa_switch *ds,
* forwarded to the numerically smallest CPU port whose conduit
* interface is up.
*/
- if (priv->id != ID_MT7530 && priv->id != ID_MT7621)
+ if (priv->id != ID_MT7530 && priv->id != ID_MT7621 &&
+ priv->id != ID_EN7528)
return;
mask = BIT(cpu_dp->index);
@@ -3459,6 +3491,16 @@ const struct mt753x_info mt753x_table[] = {
.phy_write_c45 = mt7531_ind_c45_phy_write,
.mac_port_get_caps = en7581_mac_port_get_caps,
},
+ [ID_EN7528] = {
+ .id = ID_EN7528,
+ .pcs_ops = &mt7530_pcs_ops,
+ .sw_setup = mt7988_setup,
+ .phy_read_c22 = mt7531_ind_c22_phy_read,
+ .phy_write_c22 = mt7531_ind_c22_phy_write,
+ .phy_read_c45 = mt7531_ind_c45_phy_read,
+ .phy_write_c45 = mt7531_ind_c45_phy_write,
+ .mac_port_get_caps = en7528_mac_port_get_caps,
+ },
};
EXPORT_SYMBOL_GPL(mt753x_table);
diff --git a/drivers/net/dsa/mt7530.h b/drivers/net/dsa/mt7530.h
index dd33b0df3419..5f1e841f42c0 100644
--- a/drivers/net/dsa/mt7530.h
+++ b/drivers/net/dsa/mt7530.h
@@ -21,6 +21,7 @@ enum mt753x_id {
ID_MT7988 = 3,
ID_EN7581 = 4,
ID_AN7583 = 5,
+ ID_EN7528 = 6,
};
#define NUM_TRGMII_CTRL 5
--
2.34.1
^ permalink raw reply related [flat|nested] 3+ messages in thread