From: Ze Huang <18771902331@163.com>
To: Inochi Amaoto <inochiama@gmail.com>,
linus.walleij@linaro.org, robh@kernel.org, krzk+dt@kernel.org,
conor+dt@kernel.org, paul.walmsley@sifive.com,
palmer@dabbelt.com, aou@eecs.berkeley.edu, conor@kernel.org
Cc: devicetree@vger.kernel.org, linux-kernel@vger.kernel.org,
jesse@rivosinc.com, cyy@cyyself.name, inochiama@outlook.com,
jszhang@kernel.org, kevin.z.m@hotmail.com
Subject: Re: [PATCH 0/3] Add initial support for Canaan Kendryte K230 pinctrl
Date: Mon, 16 Sep 2024 11:58:04 +0800 [thread overview]
Message-ID: <d0daa272-91ac-4e02-9b07-2d3141c3b7de@163.com> (raw)
In-Reply-To: <qecfx4gepop65xivvnk2w7waikvadrl2bp4evyehp4kgaegsdp@dmluqpj3xune>
On 9/16/24 6:56 AM, Inochi Amaoto wrote:
> On Sun, Sep 15, 2024 at 10:21:24PM GMT, Ze Huang wrote:
>> This patch series introduces support for the pinctrl driver of the Canaan
>> K230 SoC. The K230 SoC features 64 IO pins, each of which can be configured
>> for up to five different functions.
>>
>> The controller manages the entire pin configuration and multiplexing
>> through a single register, which control features such as schmitt trigger,
>> drive strength, bias pull-up/down, input/output enable, power source, and
>> mux mode.
>>
>> The changes have been tested on the K230 development board.
>>
>> The pin function definition can be found here [1], and most of the DTS data
>> was converted from the vendor's code [2].
>>
>> Link: https://developer.canaan-creative.com/k230/dev/_downloads/a53655a81951bc8a440ae647be286e75/K230_PINOUT_V1.1_20230321.xlsx [1]
>> Link: https://github.com/kendryte/k230_sdk/blob/main/src/little/uboot/arch/riscv/dts/k230_canmv.dts [2]
>>
>> Ze Huang (3):
>> dt-bindings: pinctrl: Add support for canaan,k230 SoC
>> pinctrl: canaan: Add support for k230 SoC
>> riscv: dts: canaan: Add k230's pinctrl node
>>
>> .../bindings/pinctrl/canaan,k230-pinctrl.yaml | 128 ++++
>> arch/riscv/boot/dts/canaan/k230-pinctrl.dtsi | 318 +++++++++
>> arch/riscv/boot/dts/canaan/k230-pinctrl.h | 18 +
>> arch/riscv/boot/dts/canaan/k230.dtsi | 2 +
>> drivers/pinctrl/Kconfig | 10 +
>> drivers/pinctrl/Makefile | 1 +
>> drivers/pinctrl/pinctrl-k230.c | 674 ++++++++++++++++++
>> 7 files changed, 1151 insertions(+)
>> create mode 100644 Documentation/devicetree/bindings/pinctrl/canaan,k230-pinctrl.yaml
>> create mode 100644 arch/riscv/boot/dts/canaan/k230-pinctrl.dtsi
>> create mode 100644 arch/riscv/boot/dts/canaan/k230-pinctrl.h
>> create mode 100644 drivers/pinctrl/pinctrl-k230.c
>>
>> --
>> 2.46.1
> You should send your patched as a thread. I think you
> forgot to set (or set wrong) in-reply-to?
Thank you for pointing that out. I apologize for the oversight. I will
resend the patch series as a thread and ensure that the in-reply-to headers
are set correctly.
Thank you for your patience.
prev parent reply other threads:[~2024-09-16 3:59 UTC|newest]
Thread overview: 6+ messages / expand[flat|nested] mbox.gz Atom feed top
2024-09-15 14:21 [PATCH 0/3] Add initial support for Canaan Kendryte K230 pinctrl Ze Huang
2024-09-15 15:22 ` Ze Huang
2024-09-15 19:35 ` Conor Dooley
2024-09-16 3:50 ` Ze Huang
2024-09-15 22:56 ` Inochi Amaoto
2024-09-16 3:58 ` Ze Huang [this message]
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=d0daa272-91ac-4e02-9b07-2d3141c3b7de@163.com \
--to=18771902331@163.com \
--cc=aou@eecs.berkeley.edu \
--cc=conor+dt@kernel.org \
--cc=conor@kernel.org \
--cc=cyy@cyyself.name \
--cc=devicetree@vger.kernel.org \
--cc=inochiama@gmail.com \
--cc=inochiama@outlook.com \
--cc=jesse@rivosinc.com \
--cc=jszhang@kernel.org \
--cc=kevin.z.m@hotmail.com \
--cc=krzk+dt@kernel.org \
--cc=linus.walleij@linaro.org \
--cc=linux-kernel@vger.kernel.org \
--cc=palmer@dabbelt.com \
--cc=paul.walmsley@sifive.com \
--cc=robh@kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox