Re: [PATCH RFC 2/7] media: qcom: iris: gen2: add support for 10bit decoding

[Dikshita Agarwal <dikshita.agarwal@oss.qualcomm.com>]

On 4/8/2026 10:13 PM, Neil Armstrong wrote:
> Add the necessary plumbing into the HFi Gen2 to signal the decoder
> the right 10bit pixel format and stride when in compressed mode.
> 
> Signed-off-by: Neil Armstrong <neil.armstrong@linaro.org>
> ---
>  .../platform/qcom/iris/iris_hfi_gen2_command.c     | 71 +++++++++++++++++++++-
>  .../platform/qcom/iris/iris_hfi_gen2_defines.h     |  1 +
>  drivers/media/platform/qcom/iris/iris_utils.c      |  4 +-
>  3 files changed, 72 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/media/platform/qcom/iris/iris_hfi_gen2_command.c b/drivers/media/platform/qcom/iris/iris_hfi_gen2_command.c
> index 30bfd90d423b..8e547e390fa3 100644
> --- a/drivers/media/platform/qcom/iris/iris_hfi_gen2_command.c
> +++ b/drivers/media/platform/qcom/iris/iris_hfi_gen2_command.c
> @@ -481,8 +481,20 @@ static int iris_hfi_gen2_set_colorformat(struct iris_inst *inst, u32 plane)
>  
>  	if (inst->domain == DECODER) {
>  		pixelformat = inst->fmt_dst->fmt.pix_mp.pixelformat;
> -		hfi_colorformat = pixelformat == V4L2_PIX_FMT_NV12 ?
> -			HFI_COLOR_FMT_NV12 : HFI_COLOR_FMT_NV12_UBWC;
> +		switch (pixelformat) {
> +		case V4L2_PIX_FMT_NV12:
> +			hfi_colorformat = HFI_COLOR_FMT_NV12;
> +			break;
> +		case V4L2_PIX_FMT_QC08C:
> +			hfi_colorformat = HFI_COLOR_FMT_NV12_UBWC;
> +			break;
> +		case V4L2_PIX_FMT_P010:
> +			hfi_colorformat = HFI_COLOR_FMT_P010;
> +			break;
> +		case V4L2_PIX_FMT_QC10C:
> +			hfi_colorformat = HFI_COLOR_FMT_TP10_UBWC;
> +			break;
> +		};
>  	} else {
>  		pixelformat = inst->fmt_src->fmt.pix_mp.pixelformat;
>  		hfi_colorformat = pixelformat == V4L2_PIX_FMT_NV12 ?
> @@ -517,7 +529,8 @@ static int iris_hfi_gen2_set_linear_stride_scanline(struct iris_inst *inst, u32
>  	stride_uv = stride_y;
>  	scanline_uv = scanline_y / 2;
>  
> -	if (pixelformat != V4L2_PIX_FMT_NV12)
> +	if (pixelformat != V4L2_PIX_FMT_NV12 &&
> +	    pixelformat != V4L2_PIX_FMT_P010)
>  		return 0;
>  
>  	payload[0] = stride_y << 16 | scanline_y;
> @@ -532,6 +545,57 @@ static int iris_hfi_gen2_set_linear_stride_scanline(struct iris_inst *inst, u32
>  						  sizeof(u64));
>  }
>  
> +static int iris_hfi_gen2_set_ubwc_stride_scanline(struct iris_inst *inst, u32 plane)
> +{
> +	u32 meta_stride_y, meta_scanline_y, meta_stride_uv, meta_scanline_uv;
> +	u32 stride_y, scanline_y, stride_uv, scanline_uv;
> +	u32 port = iris_hfi_gen2_get_port(inst, plane);
> +	u32 pixelformat, width, height;
> +	u32 payload[4];
> +
> +	pixelformat = inst->fmt_dst->fmt.pix_mp.pixelformat;
> +	width = inst->fmt_dst->fmt.pix_mp.width;
> +	height = inst->fmt_dst->fmt.pix_mp.height;

This HFI is only applicable to AV1, you might see some corruption due to
this. Please check.

Thanks,
Dikshita