Re: [PATCH v3 5/5] arch: arm64: dts: qcom: Add support for PCIe3a

[Krzysztof Kozlowski <krzk@kernel.org>]

On 16/04/2026 05:24, Qiang Yu wrote:
> On Wed, Apr 15, 2026 at 09:44:15AM +0200, Krzysztof Kozlowski wrote:
>> On Sun, Apr 12, 2026 at 11:26:00PM -0700, Qiang Yu wrote:
>>> Describe PCIe3a controller and PHY. Also add required system resources
>>> like regulators, clocks, interrupts and registers configuration for PCIe3a.
>>>
>>> Signed-off-by: Qiang Yu <qiang.yu@oss.qualcomm.com>
>>
>> subject: drop arch.
>>
>> Please use subject prefixes matching the subsystem. You can get them for
>> example with 'git log --oneline -- DIRECTORY_OR_FILE' on the directory
>> your patch is touching. For bindings, the preferred subjects are
>> explained here:
>> https://www.kernel.org/doc/html/latest/devicetree/bindings/submitting-patches.html#i-for-patch-submitters
>>
> 
> Thanks for pointing me the link. I’ll drop arch: in next version.
> 
>>> ---
>>>  arch/arm64/boot/dts/qcom/glymur.dtsi | 316 ++++++++++++++++++++++++++++++++++-
>>>  1 file changed, 315 insertions(+), 1 deletion(-)
>>>
>>> diff --git a/arch/arm64/boot/dts/qcom/glymur.dtsi b/arch/arm64/boot/dts/qcom/glymur.dtsi
>>> index f23cf81ddb77a4138deeb4e00dd8b316930a2feb..c15f87c37ecbad72076a6c731f4959a1a8bd8425 100644
>>> --- a/arch/arm64/boot/dts/qcom/glymur.dtsi
>>> +++ b/arch/arm64/boot/dts/qcom/glymur.dtsi
>>> @@ -736,7 +736,7 @@ gcc: clock-controller@100000 {
>>>  				 <0>,				/* USB 2 Phy PCIE PIPEGMUX */
>>>  				 <0>,				/* USB 2 Phy PIPEGMUX */
>>>  				 <0>,				/* USB 2 Phy SYS PCIE PIPEGMUX */
>>> -				 <0>,				/* PCIe 3a */
>>> +				 <&pcie3a_phy>,			/* PCIe 3a */
>>>  				 <&pcie3b_phy>,			/* PCIe 3b */
>>>  				 <&pcie4_phy>,			/* PCIe 4 */
>>>  				 <&pcie5_phy>,			/* PCIe 5 */
>>> @@ -3640,6 +3640,320 @@ pcie3b_port0: pcie@0 {
>>>  			};
>>
>> ...
>>
>>>> +		pcie3a_phy: phy@f00000 {
>>
>> Same comment as before.
>>
> 
> The existing PCIe/PHY nodes are not strictly ordered by address. Current
> order is:

Obviously we cannot even keep order of nodes when creating a new DTSI
file from scratch.

But adding @f00000 after @1c10000 makes even less sense, regardless how
bad existing code is. Don't make it worse!

This goes before phy@fa0000

> 
> - pcie4: pci@1bf0000
> - pcie4_phy: phy@1bf6000
> - pcie5: pci@1b40000
> - pcie5_phy: phy@1b50000
> - pcie6: pci@1c00000
> - pcie6_phy: phy@1c06000
> - pcie3b: pci@1b80000
> - pcie3a: pci@1c10000 (added in this patch)
> - pcie3a_phy: phy@f00000 (added in this patch)
> - pcie3b_phy: phy@f10000
> 
> Do you want me to reorder these nodes to follow strict address order?

No, but don't add nodes randomly or following the previous broken order.

Best regards,
Krzysztof