[PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Viken Dadhaniya]

The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
(QUP) wrapper and the common entities required by QUP to run any Serial
Engine (SE) as I2C, SPI, UART, or I3C protocol.

Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
association with QUP (Qualcomm Universal Peripheral) and the compatible
string.

Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
---
 .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
 1 file changed, 1 insertion(+), 1 deletion(-)
 rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)

diff --git a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se-qup.yaml
similarity index 98%
rename from Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
rename to Documentation/devicetree/bindings/soc/qcom/qcom,geni-se-qup.yaml
index 7b031ef09669..26f806fd627a 100644
--- a/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
+++ b/Documentation/devicetree/bindings/soc/qcom/qcom,geni-se-qup.yaml
@@ -1,7 +1,7 @@
 # SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
 %YAML 1.2
 ---
-$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se.yaml#
+$id: http://devicetree.org/schemas/soc/qcom/qcom,geni-se-qup.yaml#
 $schema: http://devicetree.org/meta-schemas/core.yaml#
 
 title: GENI Serial Engine QUP Wrapper Controller
-- 
2.34.1

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Rob Herring (Arm)]

On Fri, 21 Feb 2025 14:24:39 +0530, Viken Dadhaniya wrote:
> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
> (QUP) wrapper and the common entities required by QUP to run any Serial
> Engine (SE) as I2C, SPI, UART, or I3C protocol.
> 
> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
> association with QUP (Qualcomm Universal Peripheral) and the compatible
> string.
> 
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
> ---
>  .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>  rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:


doc reference errors (make refcheckdocs):
Warning: Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml references a file that doesn't exist: Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml
Documentation/devicetree/bindings/spi/qcom,spi-geni-qcom.yaml: Documentation/devicetree/bindings/soc/qcom/qcom,geni-se.yaml

See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250221085439.235821-1-quic_vdadhani@quicinc.com

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Krzysztof Kozlowski]

On 21/02/2025 09:54, Viken Dadhaniya wrote:
> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
> (QUP) wrapper and the common entities required by QUP to run any Serial
> Engine (SE) as I2C, SPI, UART, or I3C protocol.
> 
> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
> association with QUP (Qualcomm Universal Peripheral) and the compatible
> string.
> 
> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
> ---
>  .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
>  rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
> 

That's just churn for no real gain. Not even tested churn.

Best regards,
Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Viken Dadhaniya]

On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>> (QUP) wrapper and the common entities required by QUP to run any Serial
>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>
>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>> string.
>>
>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>> ---
>>   .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>   rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>
> 
> That's just churn for no real gain. Not even tested churn.

That's just churn for no real gain.

We made this change based on below plan, we think this will be helpful.

1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi, 
i2c, uart) nodes. This will be helpful for the shared schema in the 
ongoing changes 
https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/.

Not even tested churn.

Sorry, we realized other SPI drivers also needs to be adjusted too. We 
have validated dt_binding_check for i2c, spi, uart, and geni-se YAML 
files but missed checking make refcheckdocs.

Please let us know if any command/step is missing in further validation, 
that will help us.

> 
> Best regards,
> Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Krzysztof Kozlowski]

On 24/02/2025 09:47, Viken Dadhaniya wrote:
> 
> 
> On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
>> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>>> (QUP) wrapper and the common entities required by QUP to run any Serial
>>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>>
>>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>>> string.
>>>
>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>> ---
>>>   .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>>   1 file changed, 1 insertion(+), 1 deletion(-)
>>>   rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>>
>>
>> That's just churn for no real gain. Not even tested churn.
> 
> That's just churn for no real gain.
> 
> We made this change based on below plan, we think this will be helpful.
> 
> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.

There is no reason 2 at this point. You split your patchsets
incorrectly. At this point this is churn, without gain. No users of this
rename, no benefits.

> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi, 
> i2c, uart) nodes. This will be helpful for the shared schema in the 
> ongoing changes 

Then post it, instead of sending something which makes no sense on its own.


Best regards,
Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Viken Dadhaniya]

On 2/24/2025 3:48 PM, Krzysztof Kozlowski wrote:
> On 24/02/2025 09:47, Viken Dadhaniya wrote:
>>
>>
>> On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
>>> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>>>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>>>> (QUP) wrapper and the common entities required by QUP to run any Serial
>>>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>>>
>>>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>>>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>>>> string.
>>>>
>>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>>> ---
>>>>    .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>>    rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>>>
>>>
>>> That's just churn for no real gain. Not even tested churn.
>>
>> That's just churn for no real gain.
>>
>> We made this change based on below plan, we think this will be helpful.
>>
>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
> 
> There is no reason 2 at this point. You split your patchsets
> incorrectly. At this point this is churn, without gain. No users of this
> rename, no benefits.
> 
>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi,
>> i2c, uart) nodes. This will be helpful for the shared schema in the
>> ongoing changes
> 
> Then post it, instead of sending something which makes no sense on its own.

Should I include this change in v3 of the following serial patch?

https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/

I hope the approach below is fine for you:

1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml.
2. Create qcom,geni-se.yaml with shared properties for SE-protocol (i2c, 
spi, uart) nodes.

if there is anything wrong or missing any validation, please let me know 
so before next patch i can correct my self.

> 
> 
> Best regards,
> Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Krzysztof Kozlowski]

On 24/02/2025 14:25, Viken Dadhaniya wrote:
> 
> 
> On 2/24/2025 3:48 PM, Krzysztof Kozlowski wrote:
>> On 24/02/2025 09:47, Viken Dadhaniya wrote:
>>>
>>>
>>> On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
>>>> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>>>>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>>>>> (QUP) wrapper and the common entities required by QUP to run any Serial
>>>>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>>>>
>>>>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>>>>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>>>>> string.
>>>>>
>>>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>>>> ---
>>>>>    .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>>>>    1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>    rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>>>>
>>>>
>>>> That's just churn for no real gain. Not even tested churn.
>>>
>>> That's just churn for no real gain.
>>>
>>> We made this change based on below plan, we think this will be helpful.
>>>
>>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
>>
>> There is no reason 2 at this point. You split your patchsets
>> incorrectly. At this point this is churn, without gain. No users of this
>> rename, no benefits.
>>
>>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi,
>>> i2c, uart) nodes. This will be helpful for the shared schema in the
>>> ongoing changes
>>
>> Then post it, instead of sending something which makes no sense on its own.
> 
> Should I include this change in v3 of the following serial patch?
> 
> https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/
> 
> I hope the approach below is fine for you:
> 
> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml.

I still do not see any need nor justification for above.

> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (i2c, 
> spi, uart) nodes.

Look how other common qcom schemas are named :/


Best regards,
Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Viken Dadhaniya]

On 2/24/2025 6:59 PM, Krzysztof Kozlowski wrote:
> On 24/02/2025 14:25, Viken Dadhaniya wrote:
>>
>>
>> On 2/24/2025 3:48 PM, Krzysztof Kozlowski wrote:
>>> On 24/02/2025 09:47, Viken Dadhaniya wrote:
>>>>
>>>>
>>>> On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
>>>>> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>>>>>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>>>>>> (QUP) wrapper and the common entities required by QUP to run any Serial
>>>>>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>>>>>
>>>>>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>>>>>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>>>>>> string.
>>>>>>
>>>>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>>>>> ---
>>>>>>     .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>>>>>     1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>     rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>>>>>
>>>>>
>>>>> That's just churn for no real gain. Not even tested churn.
>>>>
>>>> That's just churn for no real gain.
>>>>
>>>> We made this change based on below plan, we think this will be helpful.
>>>>
>>>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
>>>
>>> There is no reason 2 at this point. You split your patchsets
>>> incorrectly. At this point this is churn, without gain. No users of this
>>> rename, no benefits.
>>>
>>>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi,
>>>> i2c, uart) nodes. This will be helpful for the shared schema in the
>>>> ongoing changes
>>>
>>> Then post it, instead of sending something which makes no sense on its own.
>>
>> Should I include this change in v3 of the following serial patch?
>>
>> https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/
>>
>> I hope the approach below is fine for you:
>>
>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml.
> 
> I still do not see any need nor justification for above.
> 
>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (i2c,
>> spi, uart) nodes.
> 
> Look how other common qcom schemas are named :/
> 

Yes, but we need to get agreement on whether we can create it or not. I 
found a few commonly used files:

- /pci/qcom,pcie-common.yaml
- /pinctrl/qcom,tlmm-common.yaml

Would it be wise to name it /soc/qcom/qcom,qup-common.yaml?

> 
> Best regards,
> Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Krzysztof Kozlowski]

On 25/02/2025 10:33, Viken Dadhaniya wrote:
> 
> 
> On 2/24/2025 6:59 PM, Krzysztof Kozlowski wrote:
>> On 24/02/2025 14:25, Viken Dadhaniya wrote:
>>>
>>>
>>> On 2/24/2025 3:48 PM, Krzysztof Kozlowski wrote:
>>>> On 24/02/2025 09:47, Viken Dadhaniya wrote:
>>>>>
>>>>>
>>>>> On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
>>>>>> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>>>>>>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>>>>>>> (QUP) wrapper and the common entities required by QUP to run any Serial
>>>>>>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>>>>>>
>>>>>>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>>>>>>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>>>>>>> string.
>>>>>>>
>>>>>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>>>>>> ---
>>>>>>>     .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>>>>>>     1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>     rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>>>>>>
>>>>>>
>>>>>> That's just churn for no real gain. Not even tested churn.
>>>>>
>>>>> That's just churn for no real gain.
>>>>>
>>>>> We made this change based on below plan, we think this will be helpful.
>>>>>
>>>>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
>>>>
>>>> There is no reason 2 at this point. You split your patchsets
>>>> incorrectly. At this point this is churn, without gain. No users of this
>>>> rename, no benefits.
>>>>
>>>>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi,
>>>>> i2c, uart) nodes. This will be helpful for the shared schema in the
>>>>> ongoing changes
>>>>
>>>> Then post it, instead of sending something which makes no sense on its own.
>>>
>>> Should I include this change in v3 of the following serial patch?
>>>
>>> https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/
>>>
>>> I hope the approach below is fine for you:
>>>
>>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml.
>>
>> I still do not see any need nor justification for above.
>>
>>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (i2c,
>>> spi, uart) nodes.
>>
>> Look how other common qcom schemas are named :/
>>
> 
> Yes, but we need to get agreement on whether we can create it or not. I 

That's not how upstream works.
https://www.goodreads.com/quotes/437173-talk-is-cheap-show-me-the-code

I don't have time to discuss imaginary future work which might happen or
might not. Send complete work.


> found a few commonly used files:
> 
> - /pci/qcom,pcie-common.yaml
> - /pinctrl/qcom,tlmm-common.yaml

so common suffix - geni-se-common... or geni-se-qup-props to mimic
peripheral properties.

Best regards,
Krzysztof

Re: [PATCH v1] dt-bindings: qcom: geni-se: Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml

[Viken Dadhaniya]

On 2/25/2025 6:49 PM, Krzysztof Kozlowski wrote:
> On 25/02/2025 10:33, Viken Dadhaniya wrote:
>>
>>
>> On 2/24/2025 6:59 PM, Krzysztof Kozlowski wrote:
>>> On 24/02/2025 14:25, Viken Dadhaniya wrote:
>>>>
>>>>
>>>> On 2/24/2025 3:48 PM, Krzysztof Kozlowski wrote:
>>>>> On 24/02/2025 09:47, Viken Dadhaniya wrote:
>>>>>>
>>>>>>
>>>>>> On 2/21/2025 5:05 PM, Krzysztof Kozlowski wrote:
>>>>>>> On 21/02/2025 09:54, Viken Dadhaniya wrote:
>>>>>>>> The qcom,geni-se.yaml file describes the Qualcomm Universal Peripheral
>>>>>>>> (QUP) wrapper and the common entities required by QUP to run any Serial
>>>>>>>> Engine (SE) as I2C, SPI, UART, or I3C protocol.
>>>>>>>>
>>>>>>>> Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml to better reflect its
>>>>>>>> association with QUP (Qualcomm Universal Peripheral) and the compatible
>>>>>>>> string.
>>>>>>>>
>>>>>>>> Signed-off-by: Viken Dadhaniya <quic_vdadhani@quicinc.com>
>>>>>>>> ---
>>>>>>>>      .../soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml}       | 2 +-
>>>>>>>>      1 file changed, 1 insertion(+), 1 deletion(-)
>>>>>>>>      rename Documentation/devicetree/bindings/soc/qcom/{qcom,geni-se.yaml => qcom,geni-se-qup.yaml} (98%)
>>>>>>>>
>>>>>>>
>>>>>>> That's just churn for no real gain. Not even tested churn.
>>>>>>
>>>>>> That's just churn for no real gain.
>>>>>>
>>>>>> We made this change based on below plan, we think this will be helpful.
>>>>>>
>>>>>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml. Reason at 2 below.
>>>>>
>>>>> There is no reason 2 at this point. You split your patchsets
>>>>> incorrectly. At this point this is churn, without gain. No users of this
>>>>> rename, no benefits.
>>>>>
>>>>>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (spi,
>>>>>> i2c, uart) nodes. This will be helpful for the shared schema in the
>>>>>> ongoing changes
>>>>>
>>>>> Then post it, instead of sending something which makes no sense on its own.
>>>>
>>>> Should I include this change in v3 of the following serial patch?
>>>>
>>>> https://lore.kernel.org/linux-arm-msm/f090d637-1ef1-4967-b5bc-6bfce3d7130e@kernel.org/T/
>>>>
>>>> I hope the approach below is fine for you:
>>>>
>>>> 1. Rename qcom,geni-se.yaml to qcom,geni-se-qup.yaml.
>>>
>>> I still do not see any need nor justification for above.
>>>
>>>> 2. Create qcom,geni-se.yaml with shared properties for SE-protocol (i2c,
>>>> spi, uart) nodes.
>>>
>>> Look how other common qcom schemas are named :/
>>>
>>
>> Yes, but we need to get agreement on whether we can create it or not. I
> 
> That's not how upstream works.
> https://www.goodreads.com/quotes/437173-talk-is-cheap-show-me-the-code
> 
> I don't have time to discuss imaginary future work which might happen or
> might not. Send complete work.
> 

I will post the code in the next patch.

> 
>> found a few commonly used files:
>>
>> - /pci/qcom,pcie-common.yaml
>> - /pinctrl/qcom,tlmm-common.yaml
> 
> so common suffix - geni-se-common... or geni-se-qup-props to mimic
> peripheral properties.
> 
> Best regards,
> Krzysztof