* Re: Linux 6.1.133
2025-04-07 8:19 Linux 6.1.133 Greg Kroah-Hartman
@ 2025-04-07 8:19 ` Greg Kroah-Hartman
2025-04-07 15:24 ` Peter Schneider
1 sibling, 0 replies; 3+ messages in thread
From: Greg Kroah-Hartman @ 2025-04-07 8:19 UTC (permalink / raw)
To: linux-kernel, akpm, torvalds, stable; +Cc: lwn, jslaby, Greg Kroah-Hartman
diff --git a/Makefile b/Makefile
index 5b9f26ae157d..89742f1246cf 100644
--- a/Makefile
+++ b/Makefile
@@ -1,7 +1,7 @@
# SPDX-License-Identifier: GPL-2.0
VERSION = 6
PATCHLEVEL = 1
-SUBLEVEL = 132
+SUBLEVEL = 133
EXTRAVERSION =
NAME = Curry Ramen
diff --git a/arch/arm/boot/dts/imx6qdl-apalis.dtsi b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
index 7c17b91f0965..dc170a68c42f 100644
--- a/arch/arm/boot/dts/imx6qdl-apalis.dtsi
+++ b/arch/arm/boot/dts/imx6qdl-apalis.dtsi
@@ -101,6 +101,11 @@ lvds_panel_in: endpoint {
};
};
+ poweroff {
+ compatible = "regulator-poweroff";
+ cpu-supply = <&vgen2_reg>;
+ };
+
reg_module_3v3: regulator-module-3v3 {
compatible = "regulator-fixed";
regulator-always-on;
@@ -220,10 +225,6 @@ &can2 {
status = "disabled";
};
-&clks {
- fsl,pmic-stby-poweroff;
-};
-
/* Apalis SPI1 */
&ecspi1 {
cs-gpios = <&gpio5 25 GPIO_ACTIVE_LOW>;
@@ -511,7 +512,6 @@ &i2c2 {
pmic: pmic@8 {
compatible = "fsl,pfuze100";
- fsl,pmic-stby-poweroff;
reg = <0x08>;
regulators {
diff --git a/arch/arm/mm/fault.c b/arch/arm/mm/fault.c
index b0db85310331..16a7765511f8 100644
--- a/arch/arm/mm/fault.c
+++ b/arch/arm/mm/fault.c
@@ -27,6 +27,13 @@
#ifdef CONFIG_MMU
+bool copy_from_kernel_nofault_allowed(const void *unsafe_src, size_t size)
+{
+ unsigned long addr = (unsigned long)unsafe_src;
+
+ return addr >= TASK_SIZE && ULONG_MAX - addr >= size;
+}
+
/*
* This is useful to dump out the page tables associated with
* 'addr' in mm 'mm'.
@@ -552,6 +559,7 @@ do_PrefetchAbort(unsigned long addr, unsigned int ifsr, struct pt_regs *regs)
if (!inf->fn(addr, ifsr | FSR_LNX_PF, regs))
return;
+ pr_alert("8<--- cut here ---\n");
pr_alert("Unhandled prefetch abort: %s (0x%03x) at 0x%08lx\n",
inf->name, ifsr, addr);
diff --git a/drivers/counter/microchip-tcb-capture.c b/drivers/counter/microchip-tcb-capture.c
index c7af13aca36c..2f631729a870 100644
--- a/drivers/counter/microchip-tcb-capture.c
+++ b/drivers/counter/microchip-tcb-capture.c
@@ -369,6 +369,25 @@ static int mchp_tc_probe(struct platform_device *pdev)
channel);
}
+ /* Disable Quadrature Decoder and position measure */
+ ret = regmap_update_bits(regmap, ATMEL_TC_BMR, ATMEL_TC_QDEN | ATMEL_TC_POSEN, 0);
+ if (ret)
+ return ret;
+
+ /* Setup the period capture mode */
+ ret = regmap_update_bits(regmap, ATMEL_TC_REG(priv->channel[0], CMR),
+ ATMEL_TC_WAVE | ATMEL_TC_ABETRG | ATMEL_TC_CMR_MASK |
+ ATMEL_TC_TCCLKS,
+ ATMEL_TC_CMR_MASK);
+ if (ret)
+ return ret;
+
+ /* Enable clock and trigger counter */
+ ret = regmap_write(regmap, ATMEL_TC_REG(priv->channel[0], CCR),
+ ATMEL_TC_CLKEN | ATMEL_TC_SWTRG);
+ if (ret)
+ return ret;
+
priv->tc_cfg = tcb_config;
priv->regmap = regmap;
counter->name = dev_name(&pdev->dev);
diff --git a/drivers/counter/stm32-lptimer-cnt.c b/drivers/counter/stm32-lptimer-cnt.c
index 8439755559b2..537fe9b669f3 100644
--- a/drivers/counter/stm32-lptimer-cnt.c
+++ b/drivers/counter/stm32-lptimer-cnt.c
@@ -58,37 +58,43 @@ static int stm32_lptim_set_enable_state(struct stm32_lptim_cnt *priv,
return 0;
}
+ ret = clk_enable(priv->clk);
+ if (ret)
+ goto disable_cnt;
+
/* LP timer must be enabled before writing CMP & ARR */
ret = regmap_write(priv->regmap, STM32_LPTIM_ARR, priv->ceiling);
if (ret)
- return ret;
+ goto disable_clk;
ret = regmap_write(priv->regmap, STM32_LPTIM_CMP, 0);
if (ret)
- return ret;
+ goto disable_clk;
/* ensure CMP & ARR registers are properly written */
ret = regmap_read_poll_timeout(priv->regmap, STM32_LPTIM_ISR, val,
(val & STM32_LPTIM_CMPOK_ARROK) == STM32_LPTIM_CMPOK_ARROK,
100, 1000);
if (ret)
- return ret;
+ goto disable_clk;
ret = regmap_write(priv->regmap, STM32_LPTIM_ICR,
STM32_LPTIM_CMPOKCF_ARROKCF);
if (ret)
- return ret;
+ goto disable_clk;
- ret = clk_enable(priv->clk);
- if (ret) {
- regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
- return ret;
- }
priv->enabled = true;
/* Start LP timer in continuous mode */
return regmap_update_bits(priv->regmap, STM32_LPTIM_CR,
STM32_LPTIM_CNTSTRT, STM32_LPTIM_CNTSTRT);
+
+disable_clk:
+ clk_disable(priv->clk);
+disable_cnt:
+ regmap_write(priv->regmap, STM32_LPTIM_CR, 0);
+
+ return ret;
}
static int stm32_lptim_setup(struct stm32_lptim_cnt *priv, int enable)
diff --git a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
index e78954514e3e..958170fbfece 100644
--- a/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
+++ b/drivers/gpu/drm/amd/display/dc/dcn315/dcn315_resource.c
@@ -1772,7 +1772,7 @@ static int dcn315_populate_dml_pipes_from_context(
bool split_required = pipe->stream->timing.pix_clk_100hz >= dcn_get_max_non_odm_pix_rate_100hz(&dc->dml.soc)
|| (pipe->plane_state && pipe->plane_state->src_rect.width > 5120);
- if (remaining_det_segs > MIN_RESERVED_DET_SEGS)
+ if (remaining_det_segs > MIN_RESERVED_DET_SEGS && crb_pipes != 0)
pipes[pipe_cnt].pipe.src.det_size_override += (remaining_det_segs - MIN_RESERVED_DET_SEGS) / crb_pipes +
(crb_idx < (remaining_det_segs - MIN_RESERVED_DET_SEGS) % crb_pipes ? 1 : 0);
if (pipes[pipe_cnt].pipe.src.det_size_override > 2 * DCN3_15_MAX_DET_SEGS) {
diff --git a/drivers/hid/hid-plantronics.c b/drivers/hid/hid-plantronics.c
index 25cfd964dc25..acb9eb18f7cc 100644
--- a/drivers/hid/hid-plantronics.c
+++ b/drivers/hid/hid-plantronics.c
@@ -6,9 +6,6 @@
* Copyright (c) 2015-2018 Terry Junge <terry.junge@plantronics.com>
*/
-/*
- */
-
#include "hid-ids.h"
#include <linux/hid.h>
@@ -23,30 +20,28 @@
#define PLT_VOL_UP 0x00b1
#define PLT_VOL_DOWN 0x00b2
+#define PLT_MIC_MUTE 0x00b5
#define PLT1_VOL_UP (PLT_HID_1_0_PAGE | PLT_VOL_UP)
#define PLT1_VOL_DOWN (PLT_HID_1_0_PAGE | PLT_VOL_DOWN)
+#define PLT1_MIC_MUTE (PLT_HID_1_0_PAGE | PLT_MIC_MUTE)
#define PLT2_VOL_UP (PLT_HID_2_0_PAGE | PLT_VOL_UP)
#define PLT2_VOL_DOWN (PLT_HID_2_0_PAGE | PLT_VOL_DOWN)
+#define PLT2_MIC_MUTE (PLT_HID_2_0_PAGE | PLT_MIC_MUTE)
+#define HID_TELEPHONY_MUTE (HID_UP_TELEPHONY | 0x2f)
+#define HID_CONSUMER_MUTE (HID_UP_CONSUMER | 0xe2)
#define PLT_DA60 0xda60
#define PLT_BT300_MIN 0x0413
#define PLT_BT300_MAX 0x0418
-
-#define PLT_ALLOW_CONSUMER (field->application == HID_CP_CONSUMERCONTROL && \
- (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER)
-
-#define PLT_QUIRK_DOUBLE_VOLUME_KEYS BIT(0)
-#define PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS BIT(1)
-
#define PLT_DOUBLE_KEY_TIMEOUT 5 /* ms */
-#define PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT 220 /* ms */
struct plt_drv_data {
unsigned long device_type;
- unsigned long last_volume_key_ts;
- u32 quirks;
+ unsigned long last_key_ts;
+ unsigned long double_key_to;
+ __u16 last_key;
};
static int plantronics_input_mapping(struct hid_device *hdev,
@@ -58,34 +53,43 @@ static int plantronics_input_mapping(struct hid_device *hdev,
unsigned short mapped_key;
struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
unsigned long plt_type = drv_data->device_type;
+ int allow_mute = usage->hid == HID_TELEPHONY_MUTE;
+ int allow_consumer = field->application == HID_CP_CONSUMERCONTROL &&
+ (usage->hid & HID_USAGE_PAGE) == HID_UP_CONSUMER &&
+ usage->hid != HID_CONSUMER_MUTE;
/* special case for PTT products */
if (field->application == HID_GD_JOYSTICK)
goto defaulted;
- /* handle volume up/down mapping */
/* non-standard types or multi-HID interfaces - plt_type is PID */
if (!(plt_type & HID_USAGE_PAGE)) {
switch (plt_type) {
case PLT_DA60:
- if (PLT_ALLOW_CONSUMER)
+ if (allow_consumer)
goto defaulted;
- goto ignored;
+ if (usage->hid == HID_CONSUMER_MUTE) {
+ mapped_key = KEY_MICMUTE;
+ goto mapped;
+ }
+ break;
default:
- if (PLT_ALLOW_CONSUMER)
+ if (allow_consumer || allow_mute)
goto defaulted;
}
+ goto ignored;
}
- /* handle standard types - plt_type is 0xffa0uuuu or 0xffa2uuuu */
- /* 'basic telephony compliant' - allow default consumer page map */
- else if ((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY &&
- (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) {
- if (PLT_ALLOW_CONSUMER)
- goto defaulted;
- }
- /* not 'basic telephony' - apply legacy mapping */
- /* only map if the field is in the device's primary vendor page */
- else if (!((field->application ^ plt_type) & HID_USAGE_PAGE)) {
+
+ /* handle standard consumer control mapping */
+ /* and standard telephony mic mute mapping */
+ if (allow_consumer || allow_mute)
+ goto defaulted;
+
+ /* handle vendor unique types - plt_type is 0xffa0uuuu or 0xffa2uuuu */
+ /* if not 'basic telephony compliant' - map vendor unique controls */
+ if (!((plt_type & HID_USAGE) >= PLT_BASIC_TELEPHONY &&
+ (plt_type & HID_USAGE) != PLT_BASIC_EXCEPTION) &&
+ !((field->application ^ plt_type) & HID_USAGE_PAGE))
switch (usage->hid) {
case PLT1_VOL_UP:
case PLT2_VOL_UP:
@@ -95,8 +99,11 @@ static int plantronics_input_mapping(struct hid_device *hdev,
case PLT2_VOL_DOWN:
mapped_key = KEY_VOLUMEDOWN;
goto mapped;
+ case PLT1_MIC_MUTE:
+ case PLT2_MIC_MUTE:
+ mapped_key = KEY_MICMUTE;
+ goto mapped;
}
- }
/*
* Future mapping of call control or other usages,
@@ -105,6 +112,8 @@ static int plantronics_input_mapping(struct hid_device *hdev,
*/
ignored:
+ hid_dbg(hdev, "usage: %08x (appl: %08x) - ignored\n",
+ usage->hid, field->application);
return -1;
defaulted:
@@ -123,38 +132,26 @@ static int plantronics_event(struct hid_device *hdev, struct hid_field *field,
struct hid_usage *usage, __s32 value)
{
struct plt_drv_data *drv_data = hid_get_drvdata(hdev);
+ unsigned long prev_tsto, cur_ts;
+ __u16 prev_key, cur_key;
- if (drv_data->quirks & PLT_QUIRK_DOUBLE_VOLUME_KEYS) {
- unsigned long prev_ts, cur_ts;
+ /* Usages are filtered in plantronics_usages. */
- /* Usages are filtered in plantronics_usages. */
+ /* HZ too low for ms resolution - double key detection disabled */
+ /* or it is a key release - handle key presses only. */
+ if (!drv_data->double_key_to || !value)
+ return 0;
- if (!value) /* Handle key presses only. */
- return 0;
+ prev_tsto = drv_data->last_key_ts + drv_data->double_key_to;
+ cur_ts = drv_data->last_key_ts = jiffies;
+ prev_key = drv_data->last_key;
+ cur_key = drv_data->last_key = usage->code;
- prev_ts = drv_data->last_volume_key_ts;
- cur_ts = jiffies;
- if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_DOUBLE_KEY_TIMEOUT)
- return 1; /* Ignore the repeated key. */
-
- drv_data->last_volume_key_ts = cur_ts;
+ /* If the same key occurs in <= double_key_to -- ignore it */
+ if (prev_key == cur_key && time_before_eq(cur_ts, prev_tsto)) {
+ hid_dbg(hdev, "double key %d ignored\n", cur_key);
+ return 1; /* Ignore the repeated key. */
}
- if (drv_data->quirks & PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS) {
- unsigned long prev_ts, cur_ts;
-
- /* Usages are filtered in plantronics_usages. */
-
- if (!value) /* Handle key presses only. */
- return 0;
-
- prev_ts = drv_data->last_volume_key_ts;
- cur_ts = jiffies;
- if (jiffies_to_msecs(cur_ts - prev_ts) <= PLT_FOLLOWED_OPPOSITE_KEY_TIMEOUT)
- return 1; /* Ignore the followed opposite volume key. */
-
- drv_data->last_volume_key_ts = cur_ts;
- }
-
return 0;
}
@@ -196,12 +193,16 @@ static int plantronics_probe(struct hid_device *hdev,
ret = hid_parse(hdev);
if (ret) {
hid_err(hdev, "parse failed\n");
- goto err;
+ return ret;
}
drv_data->device_type = plantronics_device_type(hdev);
- drv_data->quirks = id->driver_data;
- drv_data->last_volume_key_ts = jiffies - msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+ drv_data->double_key_to = msecs_to_jiffies(PLT_DOUBLE_KEY_TIMEOUT);
+ drv_data->last_key_ts = jiffies - drv_data->double_key_to;
+
+ /* if HZ does not allow ms resolution - disable double key detection */
+ if (drv_data->double_key_to < PLT_DOUBLE_KEY_TIMEOUT)
+ drv_data->double_key_to = 0;
hid_set_drvdata(hdev, drv_data);
@@ -210,29 +211,10 @@ static int plantronics_probe(struct hid_device *hdev,
if (ret)
hid_err(hdev, "hw start failed\n");
-err:
return ret;
}
static const struct hid_device_id plantronics_devices[] = {
- { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
- USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3210_SERIES),
- .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
- { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
- USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3220_SERIES),
- .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
- { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
- USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3215_SERIES),
- .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
- { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
- USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3225_SERIES),
- .driver_data = PLT_QUIRK_DOUBLE_VOLUME_KEYS },
- { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
- USB_DEVICE_ID_PLANTRONICS_BLACKWIRE_3325_SERIES),
- .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS },
- { HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS,
- USB_DEVICE_ID_PLANTRONICS_ENCOREPRO_500_SERIES),
- .driver_data = PLT_QUIRK_FOLLOWED_OPPOSITE_VOLUME_KEYS },
{ HID_USB_DEVICE(USB_VENDOR_ID_PLANTRONICS, HID_ANY_ID) },
{ }
};
@@ -241,6 +223,14 @@ MODULE_DEVICE_TABLE(hid, plantronics_devices);
static const struct hid_usage_id plantronics_usages[] = {
{ HID_CP_VOLUMEUP, EV_KEY, HID_ANY_ID },
{ HID_CP_VOLUMEDOWN, EV_KEY, HID_ANY_ID },
+ { HID_TELEPHONY_MUTE, EV_KEY, HID_ANY_ID },
+ { HID_CONSUMER_MUTE, EV_KEY, HID_ANY_ID },
+ { PLT2_VOL_UP, EV_KEY, HID_ANY_ID },
+ { PLT2_VOL_DOWN, EV_KEY, HID_ANY_ID },
+ { PLT2_MIC_MUTE, EV_KEY, HID_ANY_ID },
+ { PLT1_VOL_UP, EV_KEY, HID_ANY_ID },
+ { PLT1_VOL_DOWN, EV_KEY, HID_ANY_ID },
+ { PLT1_MIC_MUTE, EV_KEY, HID_ANY_ID },
{ HID_TERMINATOR, HID_TERMINATOR, HID_TERMINATOR }
};
diff --git a/drivers/media/i2c/et8ek8/et8ek8_driver.c b/drivers/media/i2c/et8ek8/et8ek8_driver.c
index ff9bb9fc97dd..49fe2bd702f7 100644
--- a/drivers/media/i2c/et8ek8/et8ek8_driver.c
+++ b/drivers/media/i2c/et8ek8/et8ek8_driver.c
@@ -1460,7 +1460,7 @@ static int et8ek8_probe(struct i2c_client *client)
return ret;
}
-static void __exit et8ek8_remove(struct i2c_client *client)
+static void et8ek8_remove(struct i2c_client *client)
{
struct v4l2_subdev *subdev = i2c_get_clientdata(client);
struct et8ek8_sensor *sensor = to_et8ek8_sensor(subdev);
@@ -1502,7 +1502,7 @@ static struct i2c_driver et8ek8_i2c_driver = {
.of_match_table = et8ek8_of_table,
},
.probe_new = et8ek8_probe,
- .remove = __exit_p(et8ek8_remove),
+ .remove = et8ek8_remove,
.id_table = et8ek8_id_table,
};
diff --git a/drivers/memstick/host/rtsx_usb_ms.c b/drivers/memstick/host/rtsx_usb_ms.c
index 29271ad4728a..dec279845a75 100644
--- a/drivers/memstick/host/rtsx_usb_ms.c
+++ b/drivers/memstick/host/rtsx_usb_ms.c
@@ -813,6 +813,7 @@ static int rtsx_usb_ms_drv_remove(struct platform_device *pdev)
host->eject = true;
cancel_work_sync(&host->handle_req);
+ cancel_delayed_work_sync(&host->poll_card);
mutex_lock(&host->host_mutex);
if (host->req) {
diff --git a/drivers/net/usb/qmi_wwan.c b/drivers/net/usb/qmi_wwan.c
index 65aefebdf9a9..b4c0413c6522 100644
--- a/drivers/net/usb/qmi_wwan.c
+++ b/drivers/net/usb/qmi_wwan.c
@@ -1372,9 +1372,11 @@ static const struct usb_device_id products[] = {
{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a0, 0)}, /* Telit FN920C04 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a4, 0)}, /* Telit FN920C04 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x10a9, 0)}, /* Telit FN920C04 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x10b0, 0)}, /* Telit FE990B */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c0, 0)}, /* Telit FE910C04 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c4, 0)}, /* Telit FE910C04 */
{QMI_QUIRK_SET_DTR(0x1bc7, 0x10c8, 0)}, /* Telit FE910C04 */
+ {QMI_QUIRK_SET_DTR(0x1bc7, 0x10d0, 0)}, /* Telit FN990B */
{QMI_FIXED_INTF(0x1bc7, 0x1100, 3)}, /* Telit ME910 */
{QMI_FIXED_INTF(0x1bc7, 0x1101, 3)}, /* Telit ME910 dual modem */
{QMI_FIXED_INTF(0x1bc7, 0x1200, 5)}, /* Telit LE920 */
diff --git a/drivers/net/usb/usbnet.c b/drivers/net/usb/usbnet.c
index ae1282487b02..73bddd1645d9 100644
--- a/drivers/net/usb/usbnet.c
+++ b/drivers/net/usb/usbnet.c
@@ -178,6 +178,17 @@ int usbnet_get_ethernet_addr(struct usbnet *dev, int iMACAddress)
}
EXPORT_SYMBOL_GPL(usbnet_get_ethernet_addr);
+static bool usbnet_needs_usb_name_format(struct usbnet *dev, struct net_device *net)
+{
+ /* Point to point devices which don't have a real MAC address
+ * (or report a fake local one) have historically used the usb%d
+ * naming. Preserve this..
+ */
+ return (dev->driver_info->flags & FLAG_POINTTOPOINT) != 0 &&
+ (is_zero_ether_addr(net->dev_addr) ||
+ is_local_ether_addr(net->dev_addr));
+}
+
static void intr_complete (struct urb *urb)
{
struct usbnet *dev = urb->context;
@@ -1761,13 +1772,11 @@ usbnet_probe (struct usb_interface *udev, const struct usb_device_id *prod)
if (status < 0)
goto out1;
- // heuristic: "usb%d" for links we know are two-host,
- // else "eth%d" when there's reasonable doubt. userspace
- // can rename the link if it knows better.
+ /* heuristic: rename to "eth%d" if we are not sure this link
+ * is two-host (these links keep "usb%d")
+ */
if ((dev->driver_info->flags & FLAG_ETHER) != 0 &&
- ((dev->driver_info->flags & FLAG_POINTTOPOINT) == 0 ||
- /* somebody touched it*/
- !is_zero_ether_addr(net->dev_addr)))
+ !usbnet_needs_usb_name_format(dev, net))
strscpy(net->name, "eth%d", sizeof(net->name));
/* WLAN devices should always be named "wlan%d" */
if ((dev->driver_info->flags & FLAG_WLAN) != 0)
diff --git a/drivers/tty/serial/8250/8250_dma.c b/drivers/tty/serial/8250/8250_dma.c
index 0dd0ae76b90c..ad410e85effd 100644
--- a/drivers/tty/serial/8250/8250_dma.c
+++ b/drivers/tty/serial/8250/8250_dma.c
@@ -146,7 +146,7 @@ void serial8250_tx_dma_flush(struct uart_8250_port *p)
*/
dma->tx_size = 0;
- dmaengine_terminate_async(dma->rxchan);
+ dmaengine_terminate_async(dma->txchan);
}
int serial8250_rx_dma(struct uart_8250_port *p)
diff --git a/drivers/tty/serial/8250/8250_pci.c b/drivers/tty/serial/8250/8250_pci.c
index 6026cc50a7ea..cef5b346341c 100644
--- a/drivers/tty/serial/8250/8250_pci.c
+++ b/drivers/tty/serial/8250/8250_pci.c
@@ -2596,6 +2596,22 @@ static struct pci_serial_quirk pci_serial_quirks[] = {
.init = pci_oxsemi_tornado_init,
.setup = pci_oxsemi_tornado_setup,
},
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4026,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
+ {
+ .vendor = PCI_VENDOR_ID_INTASHIELD,
+ .device = 0x4021,
+ .subvendor = PCI_ANY_ID,
+ .subdevice = PCI_ANY_ID,
+ .init = pci_oxsemi_tornado_init,
+ .setup = pci_oxsemi_tornado_setup,
+ },
{
.vendor = PCI_VENDOR_ID_INTEL,
.device = 0x8811,
@@ -5127,6 +5143,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0BA2,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0BA3,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_2_115200 },
/*
* Brainboxes UC-235/246
*/
@@ -5247,6 +5271,14 @@ static const struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0C42,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_4_115200 },
+ { PCI_VENDOR_ID_INTASHIELD, 0x0C43,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_b2_4_115200 },
/*
* Brainboxes UC-420
*/
@@ -5473,6 +5505,20 @@ static const struct pci_device_id serial_pci_tbl[] = {
PCI_ANY_ID, PCI_ANY_ID,
0, 0,
pbn_oxsemi_1_15625000 },
+ /*
+ * Brainboxes XC-235
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x4026,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_oxsemi_1_15625000 },
+ /*
+ * Brainboxes XC-475
+ */
+ { PCI_VENDOR_ID_INTASHIELD, 0x4021,
+ PCI_ANY_ID, PCI_ANY_ID,
+ 0, 0,
+ pbn_oxsemi_1_15625000 },
/*
* Perle PCI-RAS cards
diff --git a/drivers/usb/gadget/function/uvc_v4l2.c b/drivers/usb/gadget/function/uvc_v4l2.c
index a189b08bba80..5aeeaff7b283 100644
--- a/drivers/usb/gadget/function/uvc_v4l2.c
+++ b/drivers/usb/gadget/function/uvc_v4l2.c
@@ -121,6 +121,9 @@ static struct uvcg_format *find_format_by_pix(struct uvc_device *uvc,
list_for_each_entry(format, &uvc->header->formats, entry) {
struct uvc_format_desc *fmtdesc = to_uvc_format(format->fmt);
+ if (IS_ERR(fmtdesc))
+ continue;
+
if (fmtdesc->fcc == pixelformat) {
uformat = format->fmt;
break;
@@ -240,6 +243,7 @@ uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt)
struct uvc_video *video = &uvc->video;
struct uvcg_format *uformat;
struct uvcg_frame *uframe;
+ const struct uvc_format_desc *fmtdesc;
u8 *fcc;
if (fmt->type != video->queue.queue.type)
@@ -265,7 +269,10 @@ uvc_v4l2_try_format(struct file *file, void *fh, struct v4l2_format *fmt)
fmt->fmt.pix.field = V4L2_FIELD_NONE;
fmt->fmt.pix.bytesperline = uvc_v4l2_get_bytesperline(uformat, uframe);
fmt->fmt.pix.sizeimage = uvc_get_frame_size(uformat, uframe);
- fmt->fmt.pix.pixelformat = to_uvc_format(uformat)->fcc;
+ fmtdesc = to_uvc_format(uformat);
+ if (IS_ERR(fmtdesc))
+ return PTR_ERR(fmtdesc);
+ fmt->fmt.pix.pixelformat = fmtdesc->fcc;
fmt->fmt.pix.colorspace = V4L2_COLORSPACE_SRGB;
fmt->fmt.pix.priv = 0;
@@ -378,6 +385,9 @@ uvc_v4l2_enum_format(struct file *file, void *fh, struct v4l2_fmtdesc *f)
f->flags |= V4L2_FMT_FLAG_COMPRESSED;
fmtdesc = to_uvc_format(uformat);
+ if (IS_ERR(fmtdesc))
+ return PTR_ERR(fmtdesc);
+
f->pixelformat = fmtdesc->fcc;
strscpy(f->description, fmtdesc->name, sizeof(f->description));
diff --git a/drivers/usb/typec/ucsi/ucsi.c b/drivers/usb/typec/ucsi/ucsi.c
index 9c82dc94da81..2adf5fdc0c56 100644
--- a/drivers/usb/typec/ucsi/ucsi.c
+++ b/drivers/usb/typec/ucsi/ucsi.c
@@ -1313,11 +1313,11 @@ static int ucsi_init(struct ucsi *ucsi)
err_unregister:
for (con = connector; con->port; con++) {
+ if (con->wq)
+ destroy_workqueue(con->wq);
ucsi_unregister_partner(con);
ucsi_unregister_altmodes(con, UCSI_RECIPIENT_CON);
ucsi_unregister_port_psy(con);
- if (con->wq)
- destroy_workqueue(con->wq);
typec_unregister_port(con->port);
con->port = NULL;
}
@@ -1479,10 +1479,6 @@ void ucsi_unregister(struct ucsi *ucsi)
for (i = 0; i < ucsi->cap.num_connectors; i++) {
cancel_work_sync(&ucsi->connector[i].work);
- ucsi_unregister_partner(&ucsi->connector[i]);
- ucsi_unregister_altmodes(&ucsi->connector[i],
- UCSI_RECIPIENT_CON);
- ucsi_unregister_port_psy(&ucsi->connector[i]);
if (ucsi->connector[i].wq) {
struct ucsi_work *uwork;
@@ -1497,6 +1493,11 @@ void ucsi_unregister(struct ucsi *ucsi)
mutex_unlock(&ucsi->connector[i].lock);
destroy_workqueue(ucsi->connector[i].wq);
}
+
+ ucsi_unregister_partner(&ucsi->connector[i]);
+ ucsi_unregister_altmodes(&ucsi->connector[i],
+ UCSI_RECIPIENT_CON);
+ ucsi_unregister_port_psy(&ucsi->connector[i]);
typec_unregister_port(ucsi->connector[i].port);
}
diff --git a/net/atm/mpc.c b/net/atm/mpc.c
index 033871e718a3..583c27131b7d 100644
--- a/net/atm/mpc.c
+++ b/net/atm/mpc.c
@@ -1314,6 +1314,8 @@ static void MPOA_cache_impos_rcvd(struct k_message *msg,
holding_time = msg->content.eg_info.holding_time;
dprintk("(%s) entry = %p, holding_time = %u\n",
mpc->dev->name, entry, holding_time);
+ if (entry == NULL && !holding_time)
+ return;
if (entry == NULL && holding_time) {
entry = mpc->eg_ops->add_entry(msg, mpc);
mpc->eg_ops->put(entry);
diff --git a/net/ipv6/netfilter/nf_socket_ipv6.c b/net/ipv6/netfilter/nf_socket_ipv6.c
index a7690ec62325..9ea5ef56cb27 100644
--- a/net/ipv6/netfilter/nf_socket_ipv6.c
+++ b/net/ipv6/netfilter/nf_socket_ipv6.c
@@ -103,6 +103,10 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
struct sk_buff *data_skb = NULL;
int doff = 0;
int thoff = 0, tproto;
+#if IS_ENABLED(CONFIG_NF_CONNTRACK)
+ enum ip_conntrack_info ctinfo;
+ struct nf_conn const *ct;
+#endif
tproto = ipv6_find_hdr(skb, &thoff, -1, NULL, NULL);
if (tproto < 0) {
@@ -136,6 +140,25 @@ struct sock *nf_sk_lookup_slow_v6(struct net *net, const struct sk_buff *skb,
return NULL;
}
+#if IS_ENABLED(CONFIG_NF_CONNTRACK)
+ /* Do the lookup with the original socket address in
+ * case this is a reply packet of an established
+ * SNAT-ted connection.
+ */
+ ct = nf_ct_get(skb, &ctinfo);
+ if (ct &&
+ ((tproto != IPPROTO_ICMPV6 &&
+ ctinfo == IP_CT_ESTABLISHED_REPLY) ||
+ (tproto == IPPROTO_ICMPV6 &&
+ ctinfo == IP_CT_RELATED_REPLY)) &&
+ (ct->status & IPS_SRC_NAT_DONE)) {
+ daddr = &ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u3.in6;
+ dport = (tproto == IPPROTO_TCP) ?
+ ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.tcp.port :
+ ct->tuplehash[IP_CT_DIR_ORIGINAL].tuple.src.u.udp.port;
+ }
+#endif
+
return nf_socket_get_sock_v6(net, data_skb, doff, tproto, saddr, daddr,
sport, dport, indev);
}
diff --git a/sound/pci/hda/patch_realtek.c b/sound/pci/hda/patch_realtek.c
index 102af43f7442..a562e574fe40 100644
--- a/sound/pci/hda/patch_realtek.c
+++ b/sound/pci/hda/patch_realtek.c
@@ -9867,6 +9867,7 @@ static const struct snd_pci_quirk alc269_fixup_tbl[] = {
SND_PCI_QUIRK(0x103c, 0x8811, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x8812, "HP Spectre x360 15-eb1xxx", ALC285_FIXUP_HP_SPECTRE_X360_EB1),
SND_PCI_QUIRK(0x103c, 0x881d, "HP 250 G8 Notebook PC", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
+ SND_PCI_QUIRK(0x103c, 0x881e, "HP Laptop 15s-du3xxx", ALC236_FIXUP_HP_MUTE_LED_COEFBIT2),
SND_PCI_QUIRK(0x103c, 0x8846, "HP EliteBook 850 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x8847, "HP EliteBook x360 830 G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
SND_PCI_QUIRK(0x103c, 0x884b, "HP EliteBook 840 Aero G8 Notebook PC", ALC285_FIXUP_HP_GPIO_LED),
diff --git a/sound/usb/mixer_quirks.c b/sound/usb/mixer_quirks.c
index 06965da51dd0..be0b3c8ac705 100644
--- a/sound/usb/mixer_quirks.c
+++ b/sound/usb/mixer_quirks.c
@@ -3575,6 +3575,52 @@ static void snd_dragonfly_quirk_db_scale(struct usb_mixer_interface *mixer,
}
}
+/*
+ * Some Plantronics headsets have control names that don't meet ALSA naming
+ * standards. This function fixes nonstandard source names. By the time
+ * this function is called the control name should look like one of these:
+ * "source names Playback Volume"
+ * "source names Playback Switch"
+ * "source names Capture Volume"
+ * "source names Capture Switch"
+ * If any of the trigger words are found in the name then the name will
+ * be changed to:
+ * "Headset Playback Volume"
+ * "Headset Playback Switch"
+ * "Headset Capture Volume"
+ * "Headset Capture Switch"
+ * depending on the current suffix.
+ */
+static void snd_fix_plt_name(struct snd_usb_audio *chip,
+ struct snd_ctl_elem_id *id)
+{
+ /* no variant of "Sidetone" should be added to this list */
+ static const char * const trigger[] = {
+ "Earphone", "Microphone", "Receive", "Transmit"
+ };
+ static const char * const suffix[] = {
+ " Playback Volume", " Playback Switch",
+ " Capture Volume", " Capture Switch"
+ };
+ int i;
+
+ for (i = 0; i < ARRAY_SIZE(trigger); i++)
+ if (strstr(id->name, trigger[i]))
+ goto triggered;
+ usb_audio_dbg(chip, "no change in %s\n", id->name);
+ return;
+
+triggered:
+ for (i = 0; i < ARRAY_SIZE(suffix); i++)
+ if (strstr(id->name, suffix[i])) {
+ usb_audio_dbg(chip, "fixing kctl name %s\n", id->name);
+ snprintf(id->name, sizeof(id->name), "Headset%s",
+ suffix[i]);
+ return;
+ }
+ usb_audio_dbg(chip, "something wrong in kctl name %s\n", id->name);
+}
+
void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
struct usb_mixer_elem_info *cval, int unitid,
struct snd_kcontrol *kctl)
@@ -3592,5 +3638,10 @@ void snd_usb_mixer_fu_apply_quirk(struct usb_mixer_interface *mixer,
cval->min_mute = 1;
break;
}
+
+ /* ALSA-ify some Plantronics headset control names */
+ if (USB_ID_VENDOR(mixer->chip->usb_id) == 0x047f &&
+ (cval->control == UAC_FU_MUTE || cval->control == UAC_FU_VOLUME))
+ snd_fix_plt_name(mixer->chip, &kctl->id);
}
^ permalink raw reply related [flat|nested] 3+ messages in thread