From: Dave Jiang <dave.jiang@intel.com>
To: Anisa Su <anisa.su887@gmail.com>,
linux-cxl@vger.kernel.org, linux-kernel@vger.kernel.org
Cc: nvdimm@lists.linux.dev, Dan Williams <djbw@kernel.org>,
Jonathan Cameron <jic23@kernel.org>,
Davidlohr Bueso <dave@stgolabs.net>,
Vishal Verma <vishal.l.verma@intel.com>,
Ira Weiny <iweiny@kernel.org>,
Alison Schofield <alison.schofield@intel.com>,
John Groves <John@Groves.net>, Gregory Price <gourry@gourry.net>,
Anisa Su <anisa.su@samsung.com>
Subject: Re: [PATCH v11 02/31] cxl/mem: Read dynamic capacity configuration from the device
Date: Fri, 26 Jun 2026 15:26:49 -0700 [thread overview]
Message-ID: <fb0b2eff-6244-4143-a806-5b57e66a1eba@intel.com> (raw)
In-Reply-To: <20260625112638.550691-3-anisa.su@samsung.com>
On 6/25/26 4:04 AM, Anisa Su wrote:
> From: Ira Weiny <iweiny@kernel.org>
>
> Devices which optionally support Dynamic Capacity (DC) are configured
> via mailbox commands. CXL r4.0 section 9.13.3 requires the host to issue
> the Get DC Configuration command in order to properly configure DCDs.
> Without the Get DC Configuration command DCD can't be supported.
>
> Implement the DC mailbox commands as specified in CXL 4.0 section
> 8.2.10.9.9 (opcodes 48XXh) to read and store the DCD configuration
> information. Disable DCD if an invalid configuration is found.
>
> Linux has no support for more than one dynamic capacity partition. Read
> and validate all the partitions but configure only the first partition
> as 'dynamic ram 1'. Additional partitions can be added in the future if
> such a device ever materializes. Additionally it is anticipated that no
> skips will be present from the end of the pmem partition. Check for and
> disallow this configuration as well.
>
> Linux has no use for the trailing fields of the Get Dynamic Capacity
> Configuration Output Payload (Total number of supported extents, number
> of available extents, total number of supported tags, and number of
> available tags). Avoid defining those fields to use the more useful
> dynamic C array.
>
> Based on an original patch by Navneet Singh.
>
> Signed-off-by: Ira Weiny <iweiny@kernel.org>
> Signed-off-by: Anisa Su <anisa.su@samsung.com>
Couple minor things besides sachiko issues
>
> ---
> Changes:
> 1. Move partition alignment check after is_power_of_2() check on
> blk_size, as IS_ALIGNED(partition start, blk_size) expects blk_size
> to be a power of 2 in cxl_dc_check()
>
> 2. cxl_get_dc_config(): verify mbox_cmd.size_out against
> dc_resp->partitions_returned
>
> 3. cxl_dev_dc_identify(): originally calculated size of dc_resp using
> struct cxl_dc_partition_info, but dc_resp->partition[] is of type
> struct cxl_dc_partition. Fix size calculation.
>
> 4. fix do/while loop in cxl_dev_dc_identify to protect against returning
> 0 partitions infinitely
>
> 5. cxl_configure_dcd(): originally checked for gap between PMEM and DC
> partition by calculating if a gap exists:
> if ([start of dc part] - [end of pmem part])
> Replace with: if ([start of dc part] != [end of pmem part]) to avoid
> underflow in case of bad input
>
> 6. Change struct cxl_dc_partition_info to use u64 instead of size_t
> fields
>
> 7. Original commit message referenced CXL r3.2. Bump to r4.0.
> Verified section numbers remain the same
>
> 8. Rename dynamic_ram_a to dynamic_ram_1
> ---
> drivers/cxl/core/hdm.c | 2 +
> drivers/cxl/core/mbox.c | 211 ++++++++++++++++++++++++++++++++++++++++
> drivers/cxl/cxlmem.h | 47 +++++++++
> drivers/cxl/pci.c | 3 +
> include/cxl/cxl.h | 3 +-
> 5 files changed, 265 insertions(+), 1 deletion(-)
>
> diff --git a/drivers/cxl/core/hdm.c b/drivers/cxl/core/hdm.c
> index 0c80b76a5f9b..0ef076c08ed2 100644
> --- a/drivers/cxl/core/hdm.c
> +++ b/drivers/cxl/core/hdm.c
> @@ -446,6 +446,8 @@ static const char *cxl_mode_name(enum cxl_partition_mode mode)
> return "ram";
> case CXL_PARTMODE_PMEM:
> return "pmem";
> + case CXL_PARTMODE_DYNAMIC_RAM_1:
> + return "dynamic_ram_1";
> default:
> return "";
> };
> diff --git a/drivers/cxl/core/mbox.c b/drivers/cxl/core/mbox.c
> index 07aba6f0b719..2932bbd67e55 100644
> --- a/drivers/cxl/core/mbox.c
> +++ b/drivers/cxl/core/mbox.c
> @@ -1347,6 +1347,188 @@ int cxl_mem_sanitize(struct cxl_memdev *cxlmd, u16 cmd)
> return -EBUSY;
> }
>
> +static int cxl_dc_check(struct device *dev, struct cxl_dc_partition_info *part_array,
> + u8 index, struct cxl_dc_partition *dev_part)
> +{
> + u64 blk_size = le64_to_cpu(dev_part->block_size);
> + u64 len = le64_to_cpu(dev_part->length);
> +
> + part_array[index].start = le64_to_cpu(dev_part->base);
> + part_array[index].size = le64_to_cpu(dev_part->decode_length);
> + part_array[index].size *= CXL_CAPACITY_MULTIPLIER;
> +
> + /* Check partitions are in increasing DPA order */
> + if (index > 0) {
> + struct cxl_dc_partition_info *prev_part = &part_array[index - 1];
> +
> + if ((prev_part->start + prev_part->size) >
> + part_array[index].start) {
> + dev_err(dev,
> + "DPA ordering violation for DC partition %d and %d\n",
> + index - 1, index);
> + return -EINVAL;
> + }
> + }
> +
> + if (part_array[index].size == 0 || len == 0 ||
> + part_array[index].size < len || !IS_ALIGNED(len, blk_size)) {
> + dev_err(dev, "DC partition %d invalid length; size %llu len %llu blk size %llu\n",
> + index, part_array[index].size, len, blk_size);
> + return -EINVAL;
> + }
> +
> + if (blk_size == 0 || blk_size % CXL_DCD_BLOCK_LINE_SIZE ||
> + !is_power_of_2(blk_size)) {
> + dev_err(dev, "DC partition %d invalid block size %llu\n",
> + index, blk_size);
> + return -EINVAL;
> + }
> +
> + if (!IS_ALIGNED(part_array[index].start, SZ_256M) ||
> + !IS_ALIGNED(part_array[index].start, blk_size)) {
> + dev_err(dev, "DC partition %d invalid start %llu blk size %llu\n",
> + index, part_array[index].start, blk_size);
> + return -EINVAL;
> + }
> +
> + dev_dbg(dev, "DC partition %d start %llu size %llu blk_size: %llu\n",
> + index, part_array[index].start, part_array[index].size,
> + blk_size);
> +
> + return 0;
> +}
> +
> +/* Returns the number of partitions in dc_resp or -ERRNO */
> +static int cxl_get_dc_config(struct cxl_mailbox *mbox, u8 start_partition,
> + struct cxl_mbox_get_dc_config_out *dc_resp,
> + size_t dc_resp_size)
> +{
> + struct cxl_mbox_get_dc_config_in get_dc = (struct cxl_mbox_get_dc_config_in) {
> + .partition_count = CXL_MAX_DC_PARTITIONS,
> + .start_partition_index = start_partition,
> + };
> + struct cxl_mbox_cmd mbox_cmd = (struct cxl_mbox_cmd) {
> + .opcode = CXL_MBOX_OP_GET_DC_CONFIG,
> + .payload_in = &get_dc,
> + .size_in = sizeof(get_dc),
> + .size_out = dc_resp_size,
> + .payload_out = dc_resp,
> + .min_out = 8,
> + };
> + size_t expected_sz;
> + int rc;
> +
> + rc = cxl_internal_send_cmd(mbox, &mbox_cmd);
> + if (rc < 0)
> + return rc;
> +
> + if (dc_resp->partitions_returned > CXL_MAX_DC_PARTITIONS) {
> + dev_err(mbox->host, "Device returned %u partitions, max %d\n",
> + dc_resp->partitions_returned, CXL_MAX_DC_PARTITIONS);
> + return -EIO;
> + }
> +
> + /*
> + * The payload carries trailing extent/tag count fields after the
> + * partition array (CXL 3.2 Table 8-179) which the driver ignores, so
> + * the response is at least, not exactly, expected_sz.
> + */
> + expected_sz = struct_size(dc_resp, partition,
> + dc_resp->partitions_returned);
> +
> + if (mbox_cmd.size_out < expected_sz) {
> + dev_err(mbox->host,
> + "Payload size %zu less than expected %zu for %u partitions\n",
> + mbox_cmd.size_out,
> + expected_sz,
> + dc_resp->partitions_returned);
> + return -EIO;
> + }
> +
> + dev_dbg(mbox->host, "Read %d/%d DC partitions\n",
> + dc_resp->partitions_returned, dc_resp->avail_partition_count);
> + return dc_resp->partitions_returned;
> +}
> +
> +/**
> + * cxl_dev_dc_identify() - Reads the dynamic capacity information from the
> + * device.
> + * @mbox: Mailbox to query
> + * @dc_info: The dynamic partition information to return
> + *
> + * Read Dynamic Capacity information from the device and return the partition
> + * information.
> + *
> + * Return: 0 if identify was executed successfully, -ERRNO on error.
> + * on error only dynamic_bytes is left unchanged.
s/dynamic_bytes/dc_info/ ?
> + */
> +int cxl_dev_dc_identify(struct cxl_mailbox *mbox,
> + struct cxl_dc_partition_info *dc_info)
> +{
> + struct cxl_dc_partition_info partitions[CXL_MAX_DC_PARTITIONS];
> + struct cxl_mbox_get_dc_config_out *dc_resp __free(kfree);
> + struct device *dev = mbox->host;
> + u8 start_partition;
> + u8 num_partitions;
> + size_t dc_resp_size = struct_size(dc_resp,
> + partition,
> + CXL_MAX_DC_PARTITIONS);
> +
> + dc_resp = kmalloc(dc_resp_size, GFP_KERNEL);
> + if (!dc_resp)
> + return -ENOMEM;
> +
> + /**
/*
> + * Read and check all partition information for validity and potential
> + * debugging; see debug output in cxl_dc_check()
> + */
> + start_partition = 0;
> + num_partitions = 0;
> + do {
> + int rc, i, j;
> +
> + rc = cxl_get_dc_config(mbox, start_partition, dc_resp, dc_resp_size);
> + if (rc < 0) {
> + dev_err(dev, "Failed to get DC config: %d\n", rc);
> + return rc;
> + }
> +
> + if (rc == 0) {
> + dev_err(dev,
> + "Device reported %u partitions available but returned none at index %u\n",
> + dc_resp->avail_partition_count, start_partition);
> + return -EIO;
> + }
> +
> + num_partitions += rc;
> +
> + if (num_partitions < 1 || num_partitions > CXL_MAX_DC_PARTITIONS) {
> + dev_err(dev, "Invalid num of dynamic capacity partitions %d\n",
> + num_partitions);
> + return -EINVAL;
> + }
> +
> + for (i = start_partition, j = 0; i < num_partitions; i++, j++) {
> + rc = cxl_dc_check(dev, partitions, i,
> + &dc_resp->partition[j]);
> + if (rc)
> + return rc;
> + }
> +
> + start_partition = num_partitions;
> +
> + } while (num_partitions < dc_resp->avail_partition_count);
> +
> + /* Return 1st partition */
> + dc_info->start = partitions[0].start;
> + dc_info->size = partitions[0].size;
> + dev_dbg(dev, "Returning partition 0 %llu size %llu\n",
> + dc_info->start, dc_info->size);
> +
> + return 0;
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_dev_dc_identify, "CXL");
> +
> static void add_part(struct cxl_dpa_info *info, u64 start, u64 size, enum cxl_partition_mode mode)
> {
> int i = info->nr_partitions;
> @@ -1417,6 +1599,35 @@ int cxl_get_dirty_count(struct cxl_memdev_state *mds, u32 *count)
> }
> EXPORT_SYMBOL_NS_GPL(cxl_get_dirty_count, "CXL");
>
> +void cxl_configure_dcd(struct cxl_memdev_state *mds, struct cxl_dpa_info *info)
> +{
> + struct cxl_dc_partition_info dc_info = { 0 };
> + struct device *dev = mds->cxlds.dev;
> + int rc;
> +
> + rc = cxl_dev_dc_identify(&mds->cxlds.cxl_mbox, &dc_info);
> + if (rc) {
> + dev_warn(dev,
> + "Failed to read Dynamic Capacity config: %d\n", rc);
> + cxl_disable_dcd(mds);
> + return;
> + }
> +
> + /* Skips between pmem and the dynamic partition are not supported */
> + if (dc_info.start != info->size) {
> + dev_warn(dev,
> + "Dynamic Capacity skip from pmem not supported\n");
> + cxl_disable_dcd(mds);
> + return;
> + }
> +
> + info->size += dc_info.size;
> + dev_dbg(dev, "Adding dynamic ram partition 1; %llu size %llu\n",
> + dc_info.start, dc_info.size);
> + add_part(info, dc_info.start, dc_info.size, CXL_PARTMODE_DYNAMIC_RAM_1);
> +}
> +EXPORT_SYMBOL_NS_GPL(cxl_configure_dcd, "CXL");
> +
> int cxl_arm_dirty_shutdown(struct cxl_memdev_state *mds)
> {
> struct cxl_mailbox *cxl_mbox = &mds->cxlds.cxl_mbox;
> diff --git a/drivers/cxl/cxlmem.h b/drivers/cxl/cxlmem.h
> index 60dc3f0006a7..6b548a1ec1e9 100644
> --- a/drivers/cxl/cxlmem.h
> +++ b/drivers/cxl/cxlmem.h
> @@ -385,6 +385,8 @@ struct cxl_security_state {
> struct kernfs_node *sanitize_node;
> };
>
> +#define CXL_MAX_DC_PARTITIONS 8
> +
> static inline resource_size_t cxl_pmem_size(struct cxl_dev_state *cxlds)
> {
> /*
> @@ -669,6 +671,31 @@ struct cxl_mbox_set_shutdown_state_in {
> u8 state;
> } __packed;
>
> +/* See CXL 3.2 Table 8-178 get dynamic capacity config Input Payload */
Update to r4.0, which is also what the commit log cites.
> +struct cxl_mbox_get_dc_config_in {
> + u8 partition_count;
> + u8 start_partition_index;
> +} __packed;
> +
> +/* See CXL 3.2 Table 8-179 get dynamic capacity config Output Payload */
Update to r4.0
DJ
> +struct cxl_mbox_get_dc_config_out {
> + u8 avail_partition_count;
> + u8 partitions_returned;
> + u8 rsvd[6];
> + /* See CXL 3.2 Table 8-180 */
> + struct cxl_dc_partition {
> + __le64 base;
> + __le64 decode_length;
> + __le64 length;
> + __le64 block_size;
> + __le32 dsmad_handle;
> + u8 flags;
> + u8 rsvd[3];
> + } __packed partition[] __counted_by(partitions_returned);
> + /* Trailing extent/tag count fields unused */
> +} __packed;
> +#define CXL_DCD_BLOCK_LINE_SIZE 0x40
> +
> /* Set Timestamp CXL 3.0 Spec 8.2.9.4.2 */
> struct cxl_mbox_set_timestamp_in {
> __le64 timestamp;
> @@ -792,9 +819,18 @@ enum {
> int cxl_internal_send_cmd(struct cxl_mailbox *cxl_mbox,
> struct cxl_mbox_cmd *cmd);
> int cxl_dev_state_identify(struct cxl_memdev_state *mds);
> +
> +struct cxl_dc_partition_info {
> + u64 start;
> + u64 size;
> +};
> +
> +int cxl_dev_dc_identify(struct cxl_mailbox *mbox,
> + struct cxl_dc_partition_info *dc_info);
> int cxl_await_media_ready(struct cxl_dev_state *cxlds);
> int cxl_enumerate_cmds(struct cxl_memdev_state *mds);
> int cxl_mem_dpa_fetch(struct cxl_memdev_state *mds, struct cxl_dpa_info *info);
> +void cxl_configure_dcd(struct cxl_memdev_state *mds, struct cxl_dpa_info *info);
> struct cxl_memdev_state *cxl_memdev_state_create(struct device *dev, u64 serial,
> u16 dvsec);
> void set_exclusive_cxl_commands(struct cxl_memdev_state *mds,
> @@ -808,6 +844,17 @@ void cxl_event_trace_record(struct cxl_memdev *cxlmd,
> const uuid_t *uuid, union cxl_event *evt);
> int cxl_get_dirty_count(struct cxl_memdev_state *mds, u32 *count);
> int cxl_arm_dirty_shutdown(struct cxl_memdev_state *mds);
> +
> +static inline bool cxl_dcd_supported(struct cxl_memdev_state *mds)
> +{
> + return mds->dcd_supported;
> +}
> +
> +static inline void cxl_disable_dcd(struct cxl_memdev_state *mds)
> +{
> + mds->dcd_supported = false;
> +}
> +
> int cxl_set_timestamp(struct cxl_memdev_state *mds);
> int cxl_poison_state_init(struct cxl_memdev_state *mds);
> int cxl_mem_get_poison(struct cxl_memdev *cxlmd, u64 offset, u64 len,
> diff --git a/drivers/cxl/pci.c b/drivers/cxl/pci.c
> index bace662dc988..60f9fa05d9ef 100644
> --- a/drivers/cxl/pci.c
> +++ b/drivers/cxl/pci.c
> @@ -870,6 +870,9 @@ static int cxl_pci_probe(struct pci_dev *pdev, const struct pci_device_id *id)
> if (rc)
> return rc;
>
> + if (cxl_dcd_supported(mds))
> + cxl_configure_dcd(mds, &range_info);
> +
> rc = cxl_dpa_setup(cxlds, &range_info);
> if (rc)
> return rc;
> diff --git a/include/cxl/cxl.h b/include/cxl/cxl.h
> index fa7269154620..e8a0899960d4 100644
> --- a/include/cxl/cxl.h
> +++ b/include/cxl/cxl.h
> @@ -133,6 +133,7 @@ struct cxl_dpa_perf {
> enum cxl_partition_mode {
> CXL_PARTMODE_RAM,
> CXL_PARTMODE_PMEM,
> + CXL_PARTMODE_DYNAMIC_RAM_1,
> };
>
> /**
> @@ -147,7 +148,7 @@ struct cxl_dpa_partition {
> enum cxl_partition_mode mode;
> };
>
> -#define CXL_NR_PARTITIONS_MAX 2
> +#define CXL_NR_PARTITIONS_MAX 3
>
> /**
> * struct cxl_dev_state - The driver device state
next prev parent reply other threads:[~2026-06-26 22:26 UTC|newest]
Thread overview: 44+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-06-25 11:04 DCD: Add support for Dynamic Capacity Devices (DCD) Anisa Su
2026-06-25 11:04 ` [PATCH v11 01/31] cxl/mbox: Flag " Anisa Su
2026-06-26 21:43 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 02/31] cxl/mem: Read dynamic capacity configuration from the device Anisa Su
2026-06-26 22:26 ` Dave Jiang [this message]
2026-06-25 11:04 ` [PATCH v11 04/31] cxl/core: Enforce partition order/simplify partition calls Anisa Su
2026-06-26 22:37 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 05/31] cxl/mem: Expose dynamic ram 1 partition in sysfs Anisa Su
2026-06-26 23:08 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 06/31] cxl/port: Add 'dynamic_ram_1' to endpoint decoder mode Anisa Su
2026-06-25 11:04 ` [PATCH v11 07/31] cxl/region: Add DC DAX region support Anisa Su
2026-06-26 23:18 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 08/31] cxl/events: Split event msgnum configuration from irq setup Anisa Su
2026-06-25 11:04 ` [PATCH v11 09/31] cxl/pci: Factor out interrupt policy check Anisa Su
2026-06-25 11:04 ` [PATCH v11 10/31] cxl/mem: Configure dynamic capacity interrupts Anisa Su
2026-07-07 21:51 ` Cheatham, Benjamin
2026-06-25 11:04 ` [PATCH v11 11/31] cxl/core: Return endpoint decoder information from region search Anisa Su
2026-06-25 11:04 ` [PATCH v11 12/31] cxl/mem: Set up framework for handling DC Events Anisa Su
2026-06-26 21:54 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 13/31] cxl/mem: Add 20 second timeout for stalled DC_ADD_CAPACITY chains Anisa Su
2026-06-30 21:11 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 14/31] cxl/extent: Handle DC Add Capacity events Anisa Su
2026-06-25 11:04 ` [PATCH v11 15/31] cxl/mem: Drop misaligned DCD extent groups Anisa Su
2026-06-30 21:23 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 16/31] cxl/extent: Validate DC extent partition Anisa Su
2026-06-30 22:49 ` Dave Jiang
2026-06-25 11:04 ` [PATCH v11 17/31] cxl/mem: Enforce tag-group semantics Anisa Su
2026-06-25 11:04 ` [PATCH v11 18/31] cxl/extent: Handle DC Release Capacity events Anisa Su
2026-06-25 11:04 ` [PATCH v11 19/31] cxl/extent: Enforce cross-region tag uniqueness Anisa Su
2026-06-25 11:04 ` [PATCH v11 20/31] cxl/region/extent: Expose dc_extent information in sysfs Anisa Su
2026-06-25 11:04 ` [PATCH v11 21/31] cxl + dax: Surface dax_resources on DCD Add Capacity events Anisa Su
2026-06-25 11:04 ` [PATCH v11 22/31] cxl + dax: Release dax_resources on DCD Release " Anisa Su
2026-06-25 11:05 ` [PATCH v11 23/31] dax/bus: Factor out dev dax resize logic Anisa Su
2026-06-25 11:05 ` [PATCH v11 24/31] dax/bus: Add uuid sysfs attribute to dax devices Anisa Su
2026-06-30 23:21 ` Dave Jiang
2026-06-25 11:05 ` [PATCH v11 25/31] dax/bus: Reject resize on DC dax devices and enforce 0-size creation Anisa Su
2026-06-25 11:05 ` [PATCH v11 26/31] dax/bus: Tag-aware uuid claim and show on DC dax devices Anisa Su
2026-06-25 11:05 ` [PATCH v11 27/31] cxl/region: Read existing extents on region creation Anisa Su
2026-06-25 11:05 ` [PATCH v11 28/31] cxl/mem: Trace Dynamic capacity Event Record Anisa Su
2026-06-25 11:05 ` [PATCH v11 29/31] tools/testing/cxl: Make event logs dynamic Anisa Su
2026-06-25 11:05 ` [PATCH v11 30/31] tools/testing/cxl: Add DC Regions to mock mem data Anisa Su
2026-06-25 11:05 ` [PATCH v11 31/31] Documentation/cxl: Document DCD extent handling and DC-backed DAX regions Anisa Su
2026-06-25 18:00 ` [PATCH v11 03/31] cxl/cdat: Gather DSMAS data for DCD partitions Anisa Su
2026-06-26 22:30 ` Dave Jiang
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=fb0b2eff-6244-4143-a806-5b57e66a1eba@intel.com \
--to=dave.jiang@intel.com \
--cc=John@Groves.net \
--cc=alison.schofield@intel.com \
--cc=anisa.su887@gmail.com \
--cc=anisa.su@samsung.com \
--cc=dave@stgolabs.net \
--cc=djbw@kernel.org \
--cc=gourry@gourry.net \
--cc=iweiny@kernel.org \
--cc=jic23@kernel.org \
--cc=linux-cxl@vger.kernel.org \
--cc=linux-kernel@vger.kernel.org \
--cc=nvdimm@lists.linux.dev \
--cc=vishal.l.verma@intel.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox