* xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops
@ 2002-03-06 15:35 Vincent Bernat
2002-03-06 15:43 ` Zwane Mwaikambo
` (2 more replies)
0 siblings, 3 replies; 6+ messages in thread
From: Vincent Bernat @ 2002-03-06 15:35 UTC (permalink / raw)
To: linux-kernel; +Cc: akpm
Hi !
I encounter problems with xmms segfaulting on two different
kernels. The first one is 2.4.18-xfs-preempt-lockbreak-bttv. I use
alsa drivers (0.90.0b12) for my SB PCI 128 card. The second one is
2.4.19-pre2-ac2 with shawn patch (xfs + rmap 12g) and preempt patch.
Here are the oops for the 2.4.18 :
ksymoops 2.4.4 on i686 2.4.18-xfs-preempt-lock-bttv. Options used
-V (default)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.18-xfs-preempt-lock-bttv/ (default)
-m /boot/System.map-2.4.18-xfs-preempt-lock-bttv (specified)
Unable to handle kernel paging request at virtual address d8d5c000
d8d56730
*pde = 17c45067
Oops: 0000
CPU: 0
EIP: 0010:[3c59x:__insmod_3c59x_S.bss_L40+828820/101914768] Not tainted
EFLAGS: 00210202
eax: 00000001 ebx: 00000003 ecx: ffff389f edx: fffff888
esi: fffff888 edi: d8d59fa6 ebp: d8d5bffe esp: c445fe90
ds: 0018 es: 0018 ss: 0018
Process xmms (pid: 2679, stackpage=c445f000)
Stack: d8d56840 d8d56730 cae1c710 cae1c6f0 00000000 00000004 00000004 00000001
f871f871 00000c29 000003ec 00000400 cae1c680 c551b3c0 d8d56a8a cae1c680
c7a8b500 c7a8b480 00000400 000003ec cae1c680 00000400 cae1c680 00000400
Call Trace: [3c59x:__insmod_3c59x_S.bss_L40+829092/101914496] [3c59x:__insmod_3c59x_S.bss_L40+828820/101914768] [3c59x:__insmod_3c59x_S.bss_L40+829678/101913910] [3c59x:__insmod_3c59x_S.bss_L40+817016/101926572] [3c59x:__insmod_3c59x_S.bss_L40+802037/101941551]
Code: 8b 75 00 e9 87 00 00 00 8b 75 00 81 f6 00 80 00 00 eb 7c 8b
Using defaults from ksymoops -t elf32-i386 -a i386
Code; 00000000 Before first symbol
00000000 <_EIP>:
Code; 00000000 Before first symbol
0: 8b 75 00 mov 0x0(%ebp),%esi
Code; 00000003 Before first symbol
3: e9 87 00 00 00 jmp 8f <_EIP+0x8f> 0000008f Before first symbol
Code; 00000008 Before first symbol
8: 8b 75 00 mov 0x0(%ebp),%esi
Code; 0000000b Before first symbol
b: 81 f6 00 80 00 00 xor $0x8000,%esi
Code; 00000011 Before first symbol
11: eb 7c jmp 8f <_EIP+0x8f> 0000008f Before first symbol
Code; 00000013 Before first symbol
13: 8b 00 mov (%eax),%eax
I don't have any problem with the network card after the oops, however
I can't use the sound card any more (already used). xmms wasn't using
the network. I didn't do a ksymoops on the another oops but it was
located on 3c59x too.
3c59x: Donald Becker and others. www.scyld.com/network/vortex.html
00:0d.0: 3Com PCI 3c905 Boomerang 100baseTx at 0xb000. Vers LK1.1.16
With 2.4.17, I didn't have this problem.
^ permalink raw reply [flat|nested] 6+ messages in thread* Re: xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops
2002-03-06 15:35 xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops Vincent Bernat
@ 2002-03-06 15:43 ` Zwane Mwaikambo
2002-03-06 16:14 ` Arjan van de Ven
2002-03-06 21:26 ` Keith Owens
2 siblings, 0 replies; 6+ messages in thread
From: Zwane Mwaikambo @ 2002-03-06 15:43 UTC (permalink / raw)
To: Vincent Bernat; +Cc: Linux Kernel, Andrew Morton
On Wed, 6 Mar 2002, Vincent Bernat wrote:
> Unable to handle kernel paging request at virtual address d8d5c000
> d8d56730
> *pde = 17c45067
> Oops: 0000
> CPU: 0
> EIP: 0010:[3c59x:__insmod_3c59x_S.bss_L40+828820/101914768] Not tainted
> EFLAGS: 00210202
> eax: 00000001 ebx: 00000003 ecx: ffff389f edx: fffff888
> esi: fffff888 edi: d8d59fa6 ebp: d8d5bffe esp: c445fe90
> ds: 0018 es: 0018 ss: 0018
> Process xmms (pid: 2679, stackpage=c445f000)
> Stack: d8d56840 d8d56730 cae1c710 cae1c6f0 00000000 00000004 00000004 00000001
> f871f871 00000c29 000003ec 00000400 cae1c680 c551b3c0 d8d56a8a cae1c680
> c7a8b500 c7a8b480 00000400 000003ec cae1c680 00000400 cae1c680 00000400
> Call Trace: [3c59x:__insmod_3c59x_S.bss_L40+829092/101914496] [3c59x:__insmod_3c59x_S.bss_L40+828820/101914768] [3c59x:__insmod_3c59x_S.bss_L40+829678/101913910] [3c59x:__insmod_3c59x_S.bss_L40+817016/101926572] [3c59x:__insmod_3c59x_S.bss_L40+802037/101941551]
> Code: 8b 75 00 e9 87 00 00 00 8b 75 00 81 f6 00 80 00 00 eb 7c 8b
> Using defaults from ksymoops -t elf32-i386 -a i386
I don't think its the 3com's driver fault, please run the decoded oops
right after xmms crashes and make sure the map file specified is the
correct one. Check out ksymoops(8) for perhaps more help.
Zwane
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops
2002-03-06 15:35 xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops Vincent Bernat
2002-03-06 15:43 ` Zwane Mwaikambo
@ 2002-03-06 16:14 ` Arjan van de Ven
2002-03-06 17:05 ` Vincent Bernat
2002-03-06 21:26 ` Keith Owens
2 siblings, 1 reply; 6+ messages in thread
From: Arjan van de Ven @ 2002-03-06 16:14 UTC (permalink / raw)
To: Vincent Bernat; +Cc: linux-kernel
Vincent Bernat wrote:
>
> Hi !
>
> I encounter problems with xmms segfaulting on two different
> kernels. The first one is 2.4.18-xfs-preempt-lockbreak-bttv. I use
> alsa drivers (0.90.0b12) for my SB PCI 128 card. The second one is
> 2.4.19-pre2-ac2 with shawn patch (xfs + rmap 12g) and preempt patch.
>
might be worth testing without preempt to rule that out...
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops
2002-03-06 16:14 ` Arjan van de Ven
@ 2002-03-06 17:05 ` Vincent Bernat
0 siblings, 0 replies; 6+ messages in thread
From: Vincent Bernat @ 2002-03-06 17:05 UTC (permalink / raw)
To: arjanv; +Cc: linux-kernel
OoO Lors de la soirée naissante du mercredi 06 mars 2002, vers 17:14,
Arjan van de Ven <arjanv@redhat.com> disait:
>> I encounter problems with xmms segfaulting on two different
>> kernels. The first one is 2.4.18-xfs-preempt-lockbreak-bttv. I use
>> alsa drivers (0.90.0b12) for my SB PCI 128 card. The second one is
>> 2.4.19-pre2-ac2 with shawn patch (xfs + rmap 12g) and preempt patch.
>>
> might be worth testing without preempt to rule that out...
I will try to catch the next oops to its correctness then I will try
without preempt.
--
panic("huh?\n");
2.2.16 /usr/src/linux/arch/i386/kernel/smp.c
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops
2002-03-06 15:35 xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops Vincent Bernat
2002-03-06 15:43 ` Zwane Mwaikambo
2002-03-06 16:14 ` Arjan van de Ven
@ 2002-03-06 21:26 ` Keith Owens
2002-03-06 23:28 ` Vincent Bernat
2 siblings, 1 reply; 6+ messages in thread
From: Keith Owens @ 2002-03-06 21:26 UTC (permalink / raw)
To: Vincent Bernat; +Cc: linux-kernel, akpm
On Wed, 06 Mar 2002 16:35:29 +0100,
Vincent Bernat <bernat@free.fr> wrote:
>EIP: 0010:[3c59x:__insmod_3c59x_S.bss_L40+828820/101914768] Not tainted
>Call Trace: [3c59x:__insmod_3c59x_S.bss_L40+829092/101914496] [3c59x:__insmod_3c59x_S.bss_L40+828820/101914768] [3c59x:__insmod_3c59x_S.bss_L40+829678/101913910] [3c59x:__insmod_3c59x_S.bss_L40+817016/101926572] [3c59x:__insmod_3c59x_S.bss_L40+802037/101941551]
>I can't use the sound card any more (already used). xmms wasn't using
>the network. I didn't do a ksymoops on the another oops but it was
>located on 3c59x too.
The oops is not in 3c59x. You are letting klogd convert the oops and
klogd has been broken for years. <rant>Why do distributors insist on
shipping such broken code?</rant>. Always run klogd with the -x flag
to keep its sticky fingers off the oops then you can get clean data for
ksymoops to decode.
^ permalink raw reply [flat|nested] 6+ messages in thread
* Re: xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops
2002-03-06 21:26 ` Keith Owens
@ 2002-03-06 23:28 ` Vincent Bernat
0 siblings, 0 replies; 6+ messages in thread
From: Vincent Bernat @ 2002-03-06 23:28 UTC (permalink / raw)
To: Keith Owens; +Cc: linux-kernel, akpm, Takashi Iwai, alsa-devel
OoO En cette soirée bien amorcée du mercredi 06 mars 2002, vers 22:26,
Keith Owens <kaos@ocs.com.au> disait:
> The oops is not in 3c59x. You are letting klogd convert the oops and
> klogd has been broken for years. <rant>Why do distributors insist on
> shipping such broken code?</rant>. Always run klogd with the -x flag
> to keep its sticky fingers off the oops then you can get clean data for
> ksymoops to decode.
You are right, I have used the output of dmesg instead and here is
what I get :
ksymoops 2.4.4 on i686 2.4.19-pre2-ac2-xfs-shawn9-preempt. Options used
-v /usr/src/linux/vmlinux (specified)
-k /proc/ksyms (default)
-l /proc/modules (default)
-o /lib/modules/2.4.19-pre2-ac2-xfs-shawn9-preempt/ (default)
-m /usr/src/linux/System.map (default)
Reading Oops report from the terminal
Unable to handle kernel paging request at virtual address d8d7e000
d91a3730
*pde = 17b1f067
Oops: 0000
CPU: 0
EIP: 0010:[<d91a3730>] Not tainted
Using defaults from ksymoops -t elf32-i386 -a i386
EFLAGS: 00210202
eax: 00000001 ebx: 00000003 ecx: 000007ff edx: 00000000
esi: 00000000 edi: d8d7bfa6 ebp: d8d7dffe esp: c877de90
ds: 0018 es: 0018 ss: 0018
Process xmms (pid: 3910, stackpage=c877d000)
Stack: d91a3840 d91a3730 cb4a4150 cb4a4130 00000000 00000004 00000004 00000001
00000000 00000c29 000003ec 00000400 cb4a40c0 cd94cec0 d91a3a8a cb4a40c0
c4dc8340 c4dc8380 00000400 000003ec cb4a40c0 00000400 cb4a40c0 00000400
Call Trace: [<d91a3840>] [<d91a3730>] [<d91a3a8a>] [<d91a0914>] [<d919ce91>]
[<d919d013>] [<d919ed23>] [<c0134ad5>] [<c0106f2b>]
Code: 8b 75 00 e9 87 00 00 00 8b 75 00 81 f6 00 80 00 00 eb 7c 8b
>>EIP; d91a3730 <[snd-pcm-oss]resample_shrink+180/390> <=====
Trace; d91a3840 <[snd-pcm-oss]resample_shrink+290/390>
Trace; d91a3730 <[snd-pcm-oss]resample_shrink+180/390>
Trace; d91a3a8a <[snd-pcm-oss]rate_transfer+2a/40>
Trace; d91a0914 <[snd-pcm-oss]snd_pcm_plug_write_transfer+94/d0>
Trace; d919ce91 <[snd-pcm-oss]snd_pcm_oss_write2+81/d0>
Trace; d919d013 <[snd-pcm-oss]snd_pcm_oss_write1+133/160>
Trace; d919ed23 <[snd-pcm-oss]snd_pcm_oss_write+33/50>
Trace; c0134ad5 <sys_write+95/120>
Trace; c0106f2b <system_call+33/38>
Code; d91a3730 <[snd-pcm-oss]resample_shrink+180/390>
00000000 <_EIP>:
Code; d91a3730 <[snd-pcm-oss]resample_shrink+180/390> <=====
0: 8b 75 00 mov 0x0(%ebp),%esi <=====
Code; d91a3733 <[snd-pcm-oss]resample_shrink+183/390>
3: e9 87 00 00 00 jmp 8f <_EIP+0x8f> d91a37bf <[snd-pcm-oss]resample_shrink+20f/390>
Code; d91a3738 <[snd-pcm-oss]resample_shrink+188/390>
8: 8b 75 00 mov 0x0(%ebp),%esi
Code; d91a373b <[snd-pcm-oss]resample_shrink+18b/390>
b: 81 f6 00 80 00 00 xor $0x8000,%esi
Code; d91a3741 <[snd-pcm-oss]resample_shrink+191/390>
11: eb 7c jmp 8f <_EIP+0x8f> d91a37bf <[snd-pcm-oss]resample_shrink+20f/390>
Code; d91a3743 <[snd-pcm-oss]resample_shrink+193/390>
13: 8b 00 mov (%eax),%eax
So, a problem with Alsa ? I use Alsa 0.9.0b12, compiled with no option
(plain ./configure).
snd-pcm-oss 36192 1 (autoclean)
snd-mixer-oss 8912 0 (autoclean) [snd-pcm-oss]
joydev 5808 1 (autoclean)
ns558 1360 0 (autoclean) (unused)
analog 7536 0 (autoclean) (unused)
input 3200 0 (autoclean) [joydev analog]
gameport 1376 0 (autoclean) [ns558 analog]
tuner 8512 1 (autoclean)
tvaudio 11232 0 (autoclean) (unused)
bttv 65584 0 (autoclean)
i2c-algo-bit 6912 1 (autoclean) [bttv]
i2c-core 12704 0 (autoclean) [tuner tvaudio bttv i2c-algo-bit]
videodev 4992 2 (autoclean) [bttv]
usb-uhci 22144 0 (unused)
printer 5632 0
usbcore 58016 0 [usb-uhci printer]
snd-seq-midi 3200 0 (unused)
snd-seq-midi-event 2976 0 [snd-seq-midi]
snd-seq 36304 0 [snd-seq-midi snd-seq-midi-event]
snd-ens1370 8352 1 (autoclean)
snd-pcm 49184 0 (autoclean) [snd-pcm-oss snd-ens1370]
snd-timer 10096 0 (autoclean) [snd-seq snd-pcm]
snd-rawmidi 12256 0 (autoclean) [snd-seq-midi snd-ens1370]
snd-seq-device 3856 0 (autoclean) [snd-seq-midi snd-seq snd-rawmidi]
snd-ak4531-codec 4896 0 (autoclean) [snd-ens1370]
snd 24992 0 [snd-pcm-oss snd-mixer-oss snd-seq-midi snd-seq-midi-event snd-seq snd-ens1370 snd-pcm snd-timer snd-rawmidi snd-seq-device snd-ak4531-codec]
soundcore 3536 6 [snd]
ide-scsi 7840 0 (autoclean)
sr_mod 13696 0 (autoclean)
scsi_mod 64048 2 (autoclean) [ide-scsi sr_mod]
cdrom 27264 0 (autoclean) [sr_mod]
smbfs 32848 1 (autoclean)
nfsd 67648 4 (autoclean)
lockd 48016 1 (autoclean) [nfsd]
sunrpc 63264 1 (autoclean) [nfsd lockd]
3c59x 25120 1 (autoclean)
rtc 6496 0 (autoclean)
I have updated xmms to 1.2.7 too and I use the OSS plugin.
I have crossposted to alsa mailing lists and it seems that it is a
known problem. Feel free to drop lkml from the followup.
--
MY MOM IS NOT DATING JERRY SEINFELD
MY MOM IS NOT DATING JERRY SEINFELD
MY MOM IS NOT DATING JERRY SEINFELD
-+- Bart Simpson on chalkboard in episode AABF06
^ permalink raw reply [flat|nested] 6+ messages in thread
end of thread, other threads:[~2002-03-06 23:28 UTC | newest]
Thread overview: 6+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2002-03-06 15:35 xmms segfaulting on 2.4.18 and 2.4.19-pre2-ac2 + oops Vincent Bernat
2002-03-06 15:43 ` Zwane Mwaikambo
2002-03-06 16:14 ` Arjan van de Ven
2002-03-06 17:05 ` Vincent Bernat
2002-03-06 21:26 ` Keith Owens
2002-03-06 23:28 ` Vincent Bernat
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox