The Linux Kernel Mailing List
 help / color / mirror / Atom feed
From: Takashi Iwai <tiwai@suse.de>
To: Chris Vine <chris@cvine.freeserve.co.uk>
Cc: Borislav Petkov <bp@alien8.de>,
	Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
	linux-sound@vger.kernel.org
Subject: Re: HDA Intel microphone regression in 3.1.0
Date: Wed, 02 Nov 2011 21:25:07 +0100	[thread overview]
Message-ID: <s5hsjm6l1b0.wl%tiwai@suse.de> (raw)
In-Reply-To: <s5hy5vyl5ia.wl%tiwai@suse.de>

At Wed, 02 Nov 2011 19:54:21 +0100,
Takashi Iwai wrote:
> 
> At Wed, 2 Nov 2011 17:07:42 +0000,
> Chris Vine wrote:
> > 
> > On Wed, 02 Nov 2011 12:09:03 +0100
> > Takashi Iwai <tiwai@suse.de> wrote:
> > > At Wed, 2 Nov 2011 11:54:42 +0100,
> > > Borislav Petkov wrote:
> > > > 
> > > > (adding some more people to Cc)
> > > > 
> > > > On Wed, Nov 02, 2011 at 10:25:54AM +0000, Chris Vine wrote:
> > > > > My Lenovo S12 IdeaPad netbook uses a HDA Intel sound card with
> > > > > Realtek ALC269 chip.  With the 3.1.0 kernel, all microphone input
> > > > > (both with the internal microphone and any external microphone)
> > > > > is permanently muted, although sound output works OK.  Microphone
> > > > > input works correctly with the 3.0 and earlier kernels.
> > > > > 
> > > > > The only obvious difference between the 3.0 and 3.1 kernels is
> > > > > that with kernel 3.0.7, 'dmesg | grep HDA' gives this:
> > > > > 
> > > > >  HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
> > > > > 22 HDA Intel 0000:00:1b.0: setting latency timer to 64
> > > > >  input: HDA Digital PCBeep
> > > > > as /devices/pci0000:00/0000:00:1b.0/input/input10 input: HDA
> > > > > Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > > > > input: HDA Intel Headphone
> > > > > as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > > > > 
> > > > > whereas with kernel 3.1.0 it just gives:
> > > > > 
> > > > >  input: HDA Digital PCBeep
> > > > > as /devices/pci0000:00/0000:00:1b.0/input/input9 input: HDA Intel
> > > > > Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> > > > > input: HDA Intel Headphone
> > > > > as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > > 
> > > It's just a red herring.
> > > 
> > > > > lspci -v gives the following audio hardware information:
> > > > > 
> > > > >  00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High
> > > > > Definition Audio Controller (rev 02) Subsystem: Lenovo Device 3be9
> > > > > 	Flags: bus master, fast devsel, latency 0, IRQ 22
> > > > > 	Memory at fc140000 (64-bit, non-prefetchable) [size=16K]
> > > > > 	Capabilities: [50] Power Management version 2
> > > > > 	Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
> > > > > 	Capabilities: [70] Express Root Complex Integrated
> > > > > Endpoint, MSI 00 Capabilities: [100] Virtual Channel
> > > > > 	Capabilities: [130] Root Complex Link
> > > > > 	Kernel driver in use: snd_hda_intel
> > > > > 	Kernel modules: snd-hda-intel
> > > 
> > > Please give alsa-info.sh outputs taken from both 3.0 and 3.1 kernels.
> > 
> > Attached as below (warning, this is long).
> 
> Thanks.  Could you try to pass model=auto option to snd-hda-intel module?

Also, try the patch below without model option.  This should fix the
problem.


thanks,

Takashi

---
From: Takashi Iwai <tiwai@suse.de>
Subject: [PATCH] ALSA: hda - Add missing static ADC tables for ALC269 quirks

Some ALC269 quirks define their own .cap_mixer field but without the
static adc_nids[].  This resulted in the mismatch of ADC because ALC269
may have the widget 0x07 for another audio-in, and the auto-parser picks
this up instead.

This patch fixes the problem by adding the static adc_nids[] and co
again to these entries.

Signed-off-by: Takashi Iwai <tiwai@suse.de>
---
 sound/pci/hda/alc269_quirks.c |   14 ++++++++++++++
 1 files changed, 14 insertions(+), 0 deletions(-)

diff --git a/sound/pci/hda/alc269_quirks.c b/sound/pci/hda/alc269_quirks.c
index 5ac0e21..9aeeb32 100644
--- a/sound/pci/hda/alc269_quirks.c
+++ b/sound/pci/hda/alc269_quirks.c
@@ -577,6 +577,9 @@ static const struct alc_config_preset alc269_presets[] = {
 				alc269_laptop_amic_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
+		.adc_nids = alc269_adc_nids,
+		.capsrc_nids = alc269_capsrc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc269_adc_nids),
 		.hp_nid = 0x03,
 		.num_channel_mode = ARRAY_SIZE(alc269_modes),
 		.channel_mode = alc269_modes,
@@ -591,6 +594,9 @@ static const struct alc_config_preset alc269_presets[] = {
 				alc269_laptop_dmic_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
+		.adc_nids = alc269_adc_nids,
+		.capsrc_nids = alc269_capsrc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc269_adc_nids),
 		.hp_nid = 0x03,
 		.num_channel_mode = ARRAY_SIZE(alc269_modes),
 		.channel_mode = alc269_modes,
@@ -605,6 +611,9 @@ static const struct alc_config_preset alc269_presets[] = {
 				alc269vb_laptop_amic_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
+		.adc_nids = alc269vb_adc_nids,
+		.capsrc_nids = alc269vb_capsrc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc269vb_adc_nids),
 		.hp_nid = 0x03,
 		.num_channel_mode = ARRAY_SIZE(alc269_modes),
 		.channel_mode = alc269_modes,
@@ -619,6 +628,9 @@ static const struct alc_config_preset alc269_presets[] = {
 				alc269vb_laptop_dmic_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
+		.adc_nids = alc269vb_adc_nids,
+		.capsrc_nids = alc269vb_capsrc_nids,
+		.num_adc_nids = ARRAY_SIZE(alc269vb_adc_nids),
 		.hp_nid = 0x03,
 		.num_channel_mode = ARRAY_SIZE(alc269_modes),
 		.channel_mode = alc269_modes,
@@ -633,6 +645,8 @@ static const struct alc_config_preset alc269_presets[] = {
 				alc269_laptop_dmic_init_verbs },
 		.num_dacs = ARRAY_SIZE(alc269_dac_nids),
 		.dac_nids = alc269_dac_nids,
+		.adc_nids = alc269_adc_nids,
+		.capsrc_nids = alc269_capsrc_nids,
 		.hp_nid = 0x03,
 		.num_channel_mode = ARRAY_SIZE(alc269_modes),
 		.channel_mode = alc269_modes,
-- 
1.7.7


  reply	other threads:[~2011-11-02 20:25 UTC|newest]

Thread overview: 13+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2011-11-02 10:25 HDA Intel microphone regression in 3.1.0 Chris Vine
2011-11-02 10:54 ` Borislav Petkov
2011-11-02 11:09   ` Takashi Iwai
2011-11-02 17:07     ` Chris Vine
2011-11-02 18:54       ` Takashi Iwai
2011-11-02 20:25         ` Takashi Iwai [this message]
2011-11-03  9:39           ` Chris Vine
2011-11-03  9:59             ` Takashi Iwai
2011-11-03 11:46               ` Chris Vine
2011-11-02 23:32         ` Chris Vine
2011-11-03  8:26           ` Takashi Iwai
2011-11-02 12:40 ` Sergey S. Kostyliov
2011-11-02 17:08   ` Chris Vine

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=s5hsjm6l1b0.wl%tiwai@suse.de \
    --to=tiwai@suse.de \
    --cc=bp@alien8.de \
    --cc=chris@cvine.freeserve.co.uk \
    --cc=linux-kernel@vger.kernel.org \
    --cc=linux-sound@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox