From: Takashi Iwai <tiwai@suse.de>
To: Chris Vine <chris@cvine.freeserve.co.uk>
Cc: Borislav Petkov <bp@alien8.de>,
Linux Kernel Mailing List <linux-kernel@vger.kernel.org>,
linux-sound@vger.kernel.org
Subject: Re: HDA Intel microphone regression in 3.1.0
Date: Wed, 02 Nov 2011 19:54:21 +0100 [thread overview]
Message-ID: <s5hy5vyl5ia.wl%tiwai@suse.de> (raw)
In-Reply-To: <20111102170742.059f04ed@laptop.homenet>
At Wed, 2 Nov 2011 17:07:42 +0000,
Chris Vine wrote:
>
> On Wed, 02 Nov 2011 12:09:03 +0100
> Takashi Iwai <tiwai@suse.de> wrote:
> > At Wed, 2 Nov 2011 11:54:42 +0100,
> > Borislav Petkov wrote:
> > >
> > > (adding some more people to Cc)
> > >
> > > On Wed, Nov 02, 2011 at 10:25:54AM +0000, Chris Vine wrote:
> > > > My Lenovo S12 IdeaPad netbook uses a HDA Intel sound card with
> > > > Realtek ALC269 chip. With the 3.1.0 kernel, all microphone input
> > > > (both with the internal microphone and any external microphone)
> > > > is permanently muted, although sound output works OK. Microphone
> > > > input works correctly with the 3.0 and earlier kernels.
> > > >
> > > > The only obvious difference between the 3.0 and 3.1 kernels is
> > > > that with kernel 3.0.7, 'dmesg | grep HDA' gives this:
> > > >
> > > > HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ
> > > > 22 HDA Intel 0000:00:1b.0: setting latency timer to 64
> > > > input: HDA Digital PCBeep
> > > > as /devices/pci0000:00/0000:00:1b.0/input/input10 input: HDA
> > > > Intel Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> > > > input: HDA Intel Headphone
> > > > as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
> > > >
> > > > whereas with kernel 3.1.0 it just gives:
> > > >
> > > > input: HDA Digital PCBeep
> > > > as /devices/pci0000:00/0000:00:1b.0/input/input9 input: HDA Intel
> > > > Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input10
> > > > input: HDA Intel Headphone
> > > > as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
> >
> > It's just a red herring.
> >
> > > > lspci -v gives the following audio hardware information:
> > > >
> > > > 00:1b.0 Audio device: Intel Corporation N10/ICH 7 Family High
> > > > Definition Audio Controller (rev 02) Subsystem: Lenovo Device 3be9
> > > > Flags: bus master, fast devsel, latency 0, IRQ 22
> > > > Memory at fc140000 (64-bit, non-prefetchable) [size=16K]
> > > > Capabilities: [50] Power Management version 2
> > > > Capabilities: [60] MSI: Enable- Count=1/1 Maskable- 64bit+
> > > > Capabilities: [70] Express Root Complex Integrated
> > > > Endpoint, MSI 00 Capabilities: [100] Virtual Channel
> > > > Capabilities: [130] Root Complex Link
> > > > Kernel driver in use: snd_hda_intel
> > > > Kernel modules: snd-hda-intel
> >
> > Please give alsa-info.sh outputs taken from both 3.0 and 3.1 kernels.
>
> Attached as below (warning, this is long).
Thanks. Could you try to pass model=auto option to snd-hda-intel module?
Takashi
next prev parent reply other threads:[~2011-11-02 18:54 UTC|newest]
Thread overview: 13+ messages / expand[flat|nested] mbox.gz Atom feed top
2011-11-02 10:25 HDA Intel microphone regression in 3.1.0 Chris Vine
2011-11-02 10:54 ` Borislav Petkov
2011-11-02 11:09 ` Takashi Iwai
2011-11-02 17:07 ` Chris Vine
2011-11-02 18:54 ` Takashi Iwai [this message]
2011-11-02 20:25 ` Takashi Iwai
2011-11-03 9:39 ` Chris Vine
2011-11-03 9:59 ` Takashi Iwai
2011-11-03 11:46 ` Chris Vine
2011-11-02 23:32 ` Chris Vine
2011-11-03 8:26 ` Takashi Iwai
2011-11-02 12:40 ` Sergey S. Kostyliov
2011-11-02 17:08 ` Chris Vine
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=s5hy5vyl5ia.wl%tiwai@suse.de \
--to=tiwai@suse.de \
--cc=bp@alien8.de \
--cc=chris@cvine.freeserve.co.uk \
--cc=linux-kernel@vger.kernel.org \
--cc=linux-sound@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox