Re: [PATCH v2] scsi: hisi_sas: Add slave_destroy interface for v3 hw

Re: [PATCH v2] scsi: hisi_sas: Add slave_destroy interface for v3 hw

[Yihang Li]

friendly Ping...

On 2026/4/25 16:20, Yihang Li wrote:
> WARNING is triggered when executing link reset of remote PHY
> and rmmod SAS driver simultaneously. Following is the WARNING log:
> 
> WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
>  Call trace:
>   __device_links_no_driver+0xb4/0xc0
>   device_links_driver_cleanup+0xb0/0xfc
>   __device_release_driver+0x198/0x23c
>   device_release_driver+0x38/0x50
>   bus_remove_device+0x130/0x140
>   device_del+0x184/0x434
>   __scsi_remove_device+0x118/0x150
>   scsi_remove_target+0x1bc/0x240
>   sas_rphy_remove+0x90/0x94
>   sas_rphy_delete+0x24/0x3c
>   sas_destruct_devices+0x64/0xa0 [libsas]
>   sas_revalidate_domain+0xe4/0x150 [libsas]
>   process_one_work+0x1e0/0x46c
>   worker_thread+0x15c/0x464
>   kthread+0x160/0x170
>   ret_from_fork+0x10/0x20
>  ---[ end trace 71e059eb58f85d4a ]---
> 
> During SAS phy up, link->status is set to DL_STATE_AVAILABLE in
> device_links_driver_bound, then this setting influences
> __device_links_no_driver() before driver rmmod and caused WARNING.
> 
> So we add the slave_destroy interface, to make sure link is removed
> after flush workque.
> 
> Fixes: 16fd4a7c59170 ("scsi: hisi_sas: Add device link between SCSI devices and hisi_hba")
> Signed-off-by: Yihang Li <liyihang9@huawei.com>
> ---
> Changs to v1:
> - Use the latest interface .sdev_destroy
> ---
>  drivers/scsi/hisi_sas/hisi_sas_v3_hw.c | 12 +++++++++++-
>  1 file changed, 11 insertions(+), 1 deletion(-)
> 
> diff --git a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> index fda07b193137..c7430f7c4048 100644
> --- a/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> +++ b/drivers/scsi/hisi_sas/hisi_sas_v3_hw.c
> @@ -2977,7 +2977,7 @@ static int sdev_configure_v3_hw(struct scsi_device *sdev,
>  		return 0;
>  
>  	if (!device_link_add(&sdev->sdev_gendev, dev,
> -			     DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE)) {
> +			     DL_FLAG_STATELESS | DL_FLAG_PM_RUNTIME | DL_FLAG_RPM_ACTIVE)) {
>  		if (pm_runtime_enabled(dev)) {
>  			dev_info(dev, "add device link failed, disable runtime PM for the host\n");
>  			pm_runtime_disable(dev);
> @@ -2987,6 +2987,15 @@ static int sdev_configure_v3_hw(struct scsi_device *sdev,
>  	return 0;
>  }
>  
> +static void hisi_sas_sdev_destroy(struct scsi_device *sdev)
> +{
> +	struct Scsi_Host *shost = dev_to_shost(&sdev->sdev_gendev);
> +	struct hisi_hba *hisi_hba = shost_priv(shost);
> +	struct device *dev = hisi_hba->dev;
> +
> +	device_link_remove(&sdev->sdev_gendev, dev);
> +}
> +
>  static struct attribute *host_v3_hw_attrs[] = {
>  	&dev_attr_phy_event_threshold.attr,
>  	&dev_attr_intr_conv_v3_hw.attr,
> @@ -3401,6 +3410,7 @@ static const struct scsi_host_template sht_v3_hw = {
>  	.sg_tablesize		= HISI_SAS_SGE_PAGE_CNT,
>  	.sg_prot_tablesize	= HISI_SAS_SGE_PAGE_CNT,
>  	.sdev_init		= hisi_sas_sdev_init,
> +	.sdev_destroy		= hisi_sas_sdev_destroy,
>  	.shost_groups		= host_v3_hw_groups,
>  	.sdev_groups		= sdev_groups_v3_hw,
>  	.tag_alloc_policy_rr	= true,
> 

Re: [PATCH v2] scsi: hisi_sas: Add slave_destroy interface for v3 hw

[Martin K. Petersen]

Yihang,

> WARNING is triggered when executing link reset of remote PHY and rmmod
> SAS driver simultaneously. Following is the WARNING log:

Applied to 7.2/scsi-staging, thanks!

-- 
Martin K. Petersen