* [PATCH] serial: 8250_exar: check IS_ERR() on __xr17v35x_register_gpio()
@ 2026-11-20 19:21 Elkin Cruz
0 siblings, 0 replies; 2+ messages in thread
From: Elkin Cruz @ 2026-11-20 19:21 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby
Cc: linux-kernel, linux-serial, llvm, irogers, Elkin Cruz
__xr17v35x_register_gpio() calls platform_device_register_full(), which
returns an ERR_PTR() on failure rather than NULL. Both
xr17v35x_register_gpio() and iot2040_register_gpio() store the return
value directly into priv->gpio without checking IS_ERR() and return 0;
xr17v35x_unregister_gpio() later tests only if (priv->gpio) and
dereferences the error pointer via __xr17v35x_unregister_gpio().
Check IS_ERR(pdev) and propagate PTR_ERR(pdev) in both callers.
Fixes: 1145d1a0703f ("serial: 8250_exar: use platform_device_register_full()")
Signed-off-by: Elkin Cruz <elkin@google.com>
---
I am trying out a new Clang static analysis linter for ERR_PTR/NULL
handling, and it flagged this code as possibly buggy. The findings were triaged
and fixed with an AI coding assistant, then checked against linux-next (not
runtime-tested on hardware).
Thanks,
Elkin
drivers/tty/serial/8250/8250_exar.c | 16 +++++++++++++---
1 file changed, 13 insertions(+), 3 deletions(-)
diff --git a/drivers/tty/serial/8250/8250_exar.c b/drivers/tty/serial/8250/8250_exar.c
index 42e55a8f8c69..66858e383afc 100644
--- a/drivers/tty/serial/8250/8250_exar.c
+++ b/drivers/tty/serial/8250/8250_exar.c
@@ -1173,8 +1173,14 @@ static const struct software_node exar_gpio_node = {
static int xr17v35x_register_gpio(struct exar8250 *priv, struct pci_dev *pcidev,
struct uart_8250_port *port)
{
- if (pcidev->vendor == PCI_VENDOR_ID_EXAR)
- priv->gpio = __xr17v35x_register_gpio(pcidev, &exar_gpio_node);
+ if (pcidev->vendor == PCI_VENDOR_ID_EXAR) {
+ struct platform_device *pdev;
+
+ pdev = __xr17v35x_register_gpio(pcidev, &exar_gpio_node);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ priv->gpio = pdev;
+ }
return 0;
}
@@ -1286,13 +1292,17 @@ static int iot2040_register_gpio(struct exar8250 *priv,
struct uart_8250_port *port)
{
u8 __iomem *p = port->port.membase;
+ struct platform_device *pdev;
writeb(IOT2040_UARTS_DEFAULT_MODE, p + UART_EXAR_MPIOLVL_7_0);
writeb(IOT2040_UARTS_GPIO_LO_MODE, p + UART_EXAR_MPIOSEL_7_0);
writeb(IOT2040_UARTS_ENABLE, p + UART_EXAR_MPIOLVL_15_8);
writeb(IOT2040_UARTS_GPIO_HI_MODE, p + UART_EXAR_MPIOSEL_15_8);
- priv->gpio = __xr17v35x_register_gpio(pcidev, &iot2040_gpio_node);
+ pdev = __xr17v35x_register_gpio(pcidev, &iot2040_gpio_node);
+ if (IS_ERR(pdev))
+ return PTR_ERR(pdev);
+ priv->gpio = pdev;
return 0;
}
--
2.56.1.750.gf70dc682cf-goog
^ permalink raw reply related [flat|nested] 2+ messages in thread[parent not found: <sashiko-outbox-225939@kernel.org>]
* Re: [PATCH] serial: 8250_exar: check IS_ERR() on __xr17v35x_register_gpio()
[not found] <sashiko-outbox-225939@kernel.org>
@ 2026-11-20 20:00 ` Elkin Cruz
0 siblings, 0 replies; 2+ messages in thread
From: Elkin Cruz @ 2026-11-20 20:00 UTC (permalink / raw)
To: Greg Kroah-Hartman, Jiri Slaby
Cc: linux-serial, linux-kernel, sashiko-reviews, llvm, irogers
On Fri, Nov 20, 2026 at 07:40:04PM +0000, sashiko-bot@kernel.org wrote:
Please ignore this patch.
> The error-pointer dereference in xr17v35x_unregister_gpio() mentioned in
> the commit message was already fixed by 0353b5196588 ("serial: 8250_exar:
> check priv->gpio properly"), which checks !IS_ERR_OR_NULL(priv->gpio).
>
> Previously, GPIO platform-device registration failure was non-fatal so the
> card's UART ports would still be registered. Propagating PTR_ERR(pdev) from
> xr17v35x_register_gpio() and iot2040_register_gpio() causes
> pci_xr17v35x_setup() to fail on port 0, which breaks out of the port setup
> loop in exar_pci_probe() at i == 0 and leaves the card with zero UART ports
> registered while exar_pci_probe() still returns 0:
Sashiko is right here - 0353b5196588 already fixed the unbind bug in
xr17v35x_unregister_gpio(), and returning an error from
register_gpio() would abort UART port setup in exar_pci_probe().
Thanks,
Elkin
^ permalink raw reply [flat|nested] 2+ messages in thread
end of thread, other threads:[~2026-11-20 20:00 UTC | newest]
Thread overview: 2+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2026-11-20 19:21 [PATCH] serial: 8250_exar: check IS_ERR() on __xr17v35x_register_gpio() Elkin Cruz
[not found] <sashiko-outbox-225939@kernel.org>
2026-11-20 20:00 ` Elkin Cruz
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox