* [LTP] [RFC PATCH 1/4] Remove testscripts/network.sh
2026-09-03 12:46 [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Petr Vorel
@ 2026-09-03 12:46 ` Petr Vorel
2026-09-03 13:31 ` Avinesh Kumar via ltp
2026-09-03 15:59 ` [LTP] " linuxtestproject.agent
2026-09-03 12:46 ` [LTP] [RFC PATCH 2/4] Remove testscripts/tpm_tools.sh Petr Vorel
` (4 subsequent siblings)
5 siblings, 2 replies; 9+ messages in thread
From: Petr Vorel @ 2026-09-03 12:46 UTC (permalink / raw)
To: ltp; +Cc: Tim Bird, Steffen Jaeckel, automated-testing
Script was using ltp-pan (already removed), kirk should now be used.
Fixes: 5e5fd4a1ae ("pan: Remove")
Reported-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
testscripts/network.sh | 118 -----------------------------------------
1 file changed, 118 deletions(-)
delete mode 100755 testscripts/network.sh
diff --git a/testscripts/network.sh b/testscripts/network.sh
deleted file mode 100755
index afe9c7a977..0000000000
--- a/testscripts/network.sh
+++ /dev/null
@@ -1,118 +0,0 @@
-#!/bin/sh
-# SPDX-License-Identifier: GPL-2.0-or-later
-# Copyright (c) Linux Test Project, 2013-2019
-
-cd $(dirname $0)
-export LTPROOT=${LTPROOT:-"$PWD"}
-echo $LTPROOT | grep -q testscripts
-if [ $? -eq 0 ]; then
- cd ..
- export LTPROOT=${PWD}
-fi
-
-export TMPDIR=/tmp/netpan-$$
-mkdir -p $TMPDIR
-CMDFILE=${TMPDIR}/network.tests
-VERBOSE="no"
-NO_KMSG=
-QUIET_MODE=
-TEST_CASES=
-
-export PATH="${PATH}:${LTPROOT}/testcases/bin"
-
-usage()
-{
- echo "Usage: $0 OPTIONS"
- echo " -6 IPv6 tests"
- echo " -m multicast tests"
- echo " -n NFS tests"
- echo " -s SCTP tests"
- echo " -t TCP/IP command tests"
- echo " -c RPC and TI-RPC tests"
- echo " -d TS-RPC tests"
- echo " -a Application stress tests (HTTP, SSH, DNS)"
- echo " -e Interface stress tests"
- echo " -b Stress tests with malformed ICMP packets"
- echo " -i IPsec ICMP stress tests"
- echo " -T IPsec TCP stress tests"
- echo " -U IPsec UDP stress tests"
- echo " -D IPsec DCCP stress tests"
- echo " -S IPsec SCTP stress tests"
- echo " -R route stress tests"
- echo " -M multicast stress tests"
- echo " -F network features tests (TFO, vxlan, etc.)"
- echo " -f x where x is a runtest file"
- echo " -q quiet mode (this implies not logging start of test"
- echo " in kernel log)"
- echo " -Q don't log start of test in kernel log"
- echo " -V|v verbose"
- echo " -h print this help"
-}
-
-while getopts 6mnrstaebcdiTUDSRMFf:qQVvh OPTION
-do
- case $OPTION in
- 6) TEST_CASES="$TEST_CASES net.ipv6 net.ipv6_lib";;
- m) TEST_CASES="$TEST_CASES net.multicast";;
- n) TEST_CASES="$TEST_CASES net.nfs";;
- s) TEST_CASES="$TEST_CASES net.sctp";;
- t) TEST_CASES="$TEST_CASES net.tcp_cmds";;
- c) TEST_CASES="$TEST_CASES net.rpc_tests";;
- d) TEST_CASES="$TEST_CASES net.tirpc_tests";;
- a) TEST_CASES="$TEST_CASES net_stress.appl";;
- e) TEST_CASES="$TEST_CASES net_stress.interface";;
- b) TEST_CASES="$TEST_CASES net_stress.broken_ip";;
- i) TEST_CASES="$TEST_CASES net_stress.ipsec_icmp";;
- T) TEST_CASES="$TEST_CASES net_stress.ipsec_tcp";;
- U) TEST_CASES="$TEST_CASES net_stress.ipsec_udp";;
- D) TEST_CASES="$TEST_CASES net_stress.ipsec_dccp";;
- S) TEST_CASES="$TEST_CASES net_stress.ipsec_sctp";;
- R) TEST_CASES="$TEST_CASES net_stress.route";;
- M) TEST_CASES="$TEST_CASES net_stress.multicast";;
- F) TEST_CASES="$TEST_CASES net.features";;
- f) TEST_CASES=${OPTARG};;
- q) QUIET_MODE="-q";;
- Q) NO_KMSG="-Q";;
- V|v) VERBOSE="yes";;
- h) usage; exit 0;;
- *) echo "Error: invalid option..."; usage; exit 1;;
- esac
-done
-
-if [ "$OPTIND" -eq 1 ]; then
- echo "Error: option is required"
- usage
- exit 1
-fi
-shift $(($OPTIND - 1))
-
-rm -f $CMDFILE
-
-for t in $TEST_CASES; do
- cat ${LTPROOT}/runtest/$t >> $CMDFILE
-done
-
-cd $TMPDIR
-
-cmd="${LTPROOT}/bin/ltp-pan $QUIET_MODE $NO_KMSG -e -l /tmp/netpan.log -S -a ltpnet -n ltpnet -f $CMDFILE"
-
-if [ ${VERBOSE} = "yes" ]; then
- echo "Network parameters:"
- echo " - ${LHOST_IFACES} local interface (MAC address: ${LHOST_HWADDRS})"
- echo " - ${RHOST_IFACES} remote interface (MAC address: ${RHOST_HWADDRS})"
-
- cat $CMDFILE
- ${LTPROOT}/ver_linux
- echo ""
- echo $cmd
-fi
-
-$cmd
-
-if [ $? -eq "0" ]; then
- echo ltp-pan reported PASS
-else
- echo ltp-pan reported FAIL
-fi
-
-rm -rf $TMPDIR
--
2.55.0
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [LTP] [RFC PATCH 1/4] Remove testscripts/network.sh
2026-09-03 12:46 ` [LTP] [RFC PATCH 1/4] Remove testscripts/network.sh Petr Vorel
@ 2026-09-03 13:31 ` Avinesh Kumar via ltp
2026-09-03 15:59 ` [LTP] " linuxtestproject.agent
1 sibling, 0 replies; 9+ messages in thread
From: Avinesh Kumar via ltp @ 2026-09-03 13:31 UTC (permalink / raw)
To: Petr Vorel; +Cc: Tim Bird, Steffen Jaeckel, ltp, automated-testing
Hi Petr,
On 9/3/26 2:46 PM, Petr Vorel wrote:
> Script was using ltp-pan (already removed), kirk should now be used.
>
> Fixes: 5e5fd4a1ae ("pan: Remove")
> Reported-by: Steffen Jaeckel <sjaeckel@suse.de>
> Signed-off-by: Petr Vorel <pvorel@suse.cz>
Acked-by: Avinesh Kumar <avinesh.kumar@suse.com>
for the series.
Thanks,
Avinesh
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [LTP] Remove testscripts/network.sh
2026-09-03 12:46 ` [LTP] [RFC PATCH 1/4] Remove testscripts/network.sh Petr Vorel
2026-09-03 13:31 ` Avinesh Kumar via ltp
@ 2026-09-03 15:59 ` linuxtestproject.agent
1 sibling, 0 replies; 9+ messages in thread
From: linuxtestproject.agent @ 2026-09-03 15:59 UTC (permalink / raw)
To: Petr Vorel; +Cc: ltp
Hi Petr,
On Thu, Sep 3, 2026, Petr Vorel wrote:
> Remove testscripts/network.sh
--- [PATCH 1/4] ---
> The network tests are executed by running the network.sh script:
> TEST_VARS ./network.sh OPTIONS
> To run the network stress testcases, use network.sh script, located in
> testscripts directory.
These instructions refer to the script deleted by this patch. Update both
network README files with the supported kirk invocation.
--- [PATCH 3/4] ---
> Run the ltp-aiodio.sh file to execute all the tests.
This instruction refers to the script deleted by this patch. Replace it with
the supported kirk-based procedure.
--- [PATCH 4/4] ---
> exit 0; #to let PAN reprt success of test
run_cpuctl_stress_test.sh still contains this obsolete PAN reference. Remove
it as was done for the corresponding comment in run_cpuctl_test.sh.
Verdict - Needs revision
---
Note:
The agent can sometimes produce false positives although often its
findings are genuine. If you find issues with the review, please
comment this email or ignore the suggestions.
Regards,
LTP AI Reviewer
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 9+ messages in thread
* [LTP] [RFC PATCH 2/4] Remove testscripts/tpm_tools.sh
2026-09-03 12:46 [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Petr Vorel
2026-09-03 12:46 ` [LTP] [RFC PATCH 1/4] Remove testscripts/network.sh Petr Vorel
@ 2026-09-03 12:46 ` Petr Vorel
2026-09-03 12:46 ` [LTP] [RFC PATCH 3/4] Remove testscripts/ltp-aiodio.sh Petr Vorel
` (3 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Petr Vorel @ 2026-09-03 12:46 UTC (permalink / raw)
To: ltp; +Cc: Tim Bird, Steffen Jaeckel, automated-testing
Script was using ltp-pan (already removed), kirk should now be used.
Fixes: 5e5fd4a1ae ("pan: Remove")
Reported-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
testscripts/tpm_tools.sh | 173 ---------------------------------------
1 file changed, 173 deletions(-)
delete mode 100755 testscripts/tpm_tools.sh
diff --git a/testscripts/tpm_tools.sh b/testscripts/tpm_tools.sh
deleted file mode 100755
index bf42b14728..0000000000
--- a/testscripts/tpm_tools.sh
+++ /dev/null
@@ -1,173 +0,0 @@
-#!/bin/sh
-#
-# Copyright (c) International Business Machines Corp., 2005
-#
-# This program is free software; you can redistribute it and#or modify
-# it under the terms of the GNU General Public License as published by
-# the Free Software Foundation; either version 2 of the License, or
-# (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful, but
-# WITHOUT ANY WARRANTY; without even the implied warranty of MERCHANTABILITY
-# or FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-# for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA
-#
-
-# test_tpm_tools.sh - Run the tpm-tools test suite.
-
-# Must be root to run the testsuite
-#if [ $UID != 0 ]
-#then
-# echo "FAILED: Must be root to execute this script"
-# exit 1
-#fi
-
-# Set the LTPROOT directory
-cd `dirname $0`
-export LTPROOT=${PWD}
-echo $LTPROOT | grep testscripts > /dev/null 2>&1
-if [ $? -eq 0 ]
-then
- cd ..
- export LTPROOT=${PWD}
-fi
-
-# Set the PATH to include testcase/bin
-# and the sbin directories
-export LTPBIN=$LTPROOT/testcases/bin
-export PATH=$PATH:/sbin:/usr/sbin:/usr/local/sbin:$LTPBIN
-
-# We will store the logfiles in $LTPROOT/results, so make sure
-# it exists.
-if [ ! -d $LTPROOT/results ]
-then
- mkdir $LTPROOT/results
-fi
-
-# Check for programs/daemons/groups...
-USER="`whoami`"
-RC=0
-if [ -z "$LTPTMP" ] && [ -z "$TMPBASE" ]
-then
- LTPTMP="/tmp"
-else
- LTPTMP="$TMPBASE"
-fi
-export TPM_TMPFILE="$LTPTMP/tst_tpm.err"
-rm -f $TPM_TMPFILE 1>/dev/null 2>&1
-
-# Check for the expect command
-rm -f $TPM_TMPFILE 1>/dev/null 2>&1
-which expect 1>$TPM_TMPFILE 2>&1
-if [ $? -ne 0 ]
-then
- echo "The 'expect' command is not available. Be sure the expect package has been installed properly"
- RC=1
-fi
-
-# Check for TrouSerS and that it is running
-rm -f $TPM_TMPFILE 1>/dev/null 2>&1
-which tcsd 1>$TPM_TMPFILE 2>&1
-if [ $? -ne 0 ]
-then
- echo "The trousers TSS stack is not available. Be sure trousers has been installed properly"
- if [ -f $TPM_TMPFILE ]
- then
- cat $TPM_TMPFILE
- fi
- RC=1
-else
- rm -f $TPM_TMPFILE 1>/dev/null 2>&1
- ps -ef 1>$TPM_TMPFILE
- grep tcsd $TPM_TMPFILE 1>/dev/null
- if [ $? -ne 0 ]
- then
- echo "The trousers TSS stack is not running. Be sure to start the trousers daemon (tcsd)"
- RC=1
- fi
-fi
-
-# Make the opencryptoki testing optional
-if [ -z "$TPM_NOPKCS11" ]
-then
-
- # Check for the pkcs11 group and that the user is a member of it
- grep -q ^pkcs11: /etc/group
- if [ $? -ne 0 ]
- then
- echo "The 'pkcs11' group does not exist. Be sure openCryptoki has been installed properly"
- RC=1
- fi
-
- groups | grep pkcs11 1>/dev/null 2>&1
- if [ $? -ne 0 ]
- then
- echo "User '$USER' is not a member of the 'pkcs11' group"
- RC=1
- fi
-
- # Check for openCryptoki and that it is running
- # Additionally, delete the user's TPM token data store.
- rm -f $TPM_TMPFILE 1>/dev/null 2>&1
- which pkcsslotd 1>$TPM_TMPFILE 2>&1
- if [ $? -ne 0 ]
- then
- echo "The openCryptoki PKCS#11 slot daemon is not available. Be sure openCryptoki has been installed properly"
- if [ -f $TPM_TMPFILE ]
- then
- cat $TPM_TMPFILE
- fi
- RC=1
- else
- rm -f $TPM_TMPFILE 1>/dev/null 2>&1
- ps -ef 1>$TPM_TMPFILE
- grep pkcsslotd $TPM_TMPFILE 1>/dev/null
- if [ $? -ne 0 ]
- then
- echo "The openCryptoki PKCS#11 slot daemon is not running. Be sure to start the openCryptoki slot daemon (pkcsslotd)"
- RC=1
- else
- P11DIR=`which pkcsslotd | sed s-/sbin/pkcsslotd--`
- if [ "$P11DIR" = "/usr" ]
- then
- P11DIR=""
- fi
-
- grep libpkcs11_tpm $P11DIR/var/lib/opencryptoki/pk_config_data 1>/dev/null
- if [ $? -ne 0 ]
- then
- echo "The TPM PKCS#11 token is not active. Be sure openCryptoki has been installed properly"
- RC=1
- fi
- if [ -d $P11DIR/var/lib/opencryptoki/tpm/$USER ]
- then
- rm -rf $P11DIR/var/lib/opencryptoki/tpm/$USER
- fi
- fi
- fi
-fi
-
-if [ $RC -ne 0 ]
-then
- exit 1
-fi
-
-# Set known password values
-export OWN_PWD="OWN PWD"
-export NEW_OWN_PWD="NEW OWN PWD"
-export SRK_PWD="SRK PWD"
-export NEW_SRK_PWD="NEW SRK PWD"
-export P11_SO_PWD="P11 SO PWD"
-export NEW_P11_SO_PWD="NEW P11 SO PWD"
-export P11_USER_PWD="P11 USER PWD"
-export NEW_P11_USER_PWD="NEW P11 USER PWD"
-
-echo "Running the tpm-tools testsuite..."
-$LTPROOT/bin/ltp-pan -d 5 -S -a $LTPROOT/results/tpm_tools -n ltp-tpm-tools -l $LTPROOT/results/tpm_tools.logfile -o $LTPROOT/results/tpm_tools.outfile -p -f $LTPROOT/runtest/tpm_tools
-
-echo "Done."
-exit 0
--
2.55.0
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 9+ messages in thread* [LTP] [RFC PATCH 3/4] Remove testscripts/ltp-aiodio.sh
2026-09-03 12:46 [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Petr Vorel
2026-09-03 12:46 ` [LTP] [RFC PATCH 1/4] Remove testscripts/network.sh Petr Vorel
2026-09-03 12:46 ` [LTP] [RFC PATCH 2/4] Remove testscripts/tpm_tools.sh Petr Vorel
@ 2026-09-03 12:46 ` Petr Vorel
2026-09-03 12:46 ` [LTP] [RFC PATCH 4/4] controllers: Remove obsolete references to ltp-pan Petr Vorel
` (2 subsequent siblings)
5 siblings, 0 replies; 9+ messages in thread
From: Petr Vorel @ 2026-09-03 12:46 UTC (permalink / raw)
To: ltp; +Cc: Tim Bird, Steffen Jaeckel, automated-testing
Script was using ltp-pan (already removed), kirk should now be used.
Remove also now unused testscripts/yesenter.txt.
Fixes: 5e5fd4a1ae ("pan: Remove")
Reported-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
testscripts/ltp-aiodio.sh | 327 --------------------------------------
testscripts/yesenter.txt | 2 -
2 files changed, 329 deletions(-)
delete mode 100755 testscripts/ltp-aiodio.sh
delete mode 100644 testscripts/yesenter.txt
diff --git a/testscripts/ltp-aiodio.sh b/testscripts/ltp-aiodio.sh
deleted file mode 100755
index 06ea534e37..0000000000
--- a/testscripts/ltp-aiodio.sh
+++ /dev/null
@@ -1,327 +0,0 @@
-#!/bin/bash
-# This script should be run after installing the libaio RPM or libraries
-# A valid large file should be passed to the test.
-# These tests will only run correctly if the kernel and libaio has been compiled
-# with at least a 3.3.X GCC. Older versions of the compiler will seg fault.
-#
-# 02/08/04 mridge@us.ibm.com
-#
-# 04/12/06 a Forth scenerio file has been added ltp-aiodio.part4
-#
-
-cd `dirname $0`
-export LTPROOT=${PWD}
-echo $LTPROOT | grep testscripts > /dev/null 2>&1
-if [ $? -eq 0 ]; then
- cd ..
- export LTPROOT=${PWD}
-fi
-export PATH=$LTPROOT/testcases/bin:$PATH
-export TMP=${TMP:=/tmp}
-
-run0=0
-runTest=0
-nextTest=0
-runExtendedStress=0
-
-export TMPBASE="/tmp"
-usage()
-{
- cat <<-END >&2
- usage: ${0##*/} [ -f large_filename -b partition] [-o optional partition] [-e 1] [-t 1] [-j 1] [-x 1] or [-a 1]
-
- defaults:
- file1=$file1
- part1=$part1
- ext2=0
- ext3=0
- jfs=0
- xfs=0
- example: ${0##*/} -f MyLargeFile -b /dev/hdc1 [-o /dev/hdc2] [-a 1] or
-[-e 1] [-x 1] [-j 1] [-t 1]
- -o = optional partition allows some of the tests to utilize multiple filesystems to further stress AIO/DIO
- -e = test ex2 filesystem.
- -t = test ext3 filesystem
- -j = test JFS filesystem
- -x = test XFS filesystem
- or
- -a = test all supported filesystems, this will override any other filesystem flags passed.
-
- - a 1 turns on the test for the above supported filesystem, just omit passing the flag to skip that filesystem.
-
- - A Large file should be passed to fully stress the test. You must pass at least one filesystem to test, you can pass any combination
- but there is not a default filesystem. ReiserFS does not support AIO so these tests will not support ReiserFS.
-
- - WARNING !! The partition you pass will be overwritten. This is a destructive test so only pass a partition where data can be destroyed.
-
-
-
- END
-exit
-}
-
-while getopts :a:b:e:f:t:o:x:j: arg
-do case $arg in
- f) file1=$OPTARG;;
- b) part1=$OPTARG;;
- o) part2=$OPTARG;;
- e) ext2=$OPTARG;;
- t) ext3=$OPTARG;;
- x) xfs=$OPTARG;;
- j) jfs=$OPTARG;;
- a) allfs=$OPTARG;;
-
- \?) echo "************** Help Info: ********************"
- usage;;
- esac
-done
-
-if [ ! -n "$file1" ]; then
- echo "Missing the large file. You must pass a large filename for testing"
- usage;
- exit
-fi
-
-if [ ! -n "$part1" ]; then
- echo "Missing the partition. You must pass a partition for testing"
- usage;
- exit
-fi
-
-if [ -n "$allfs" ]; then
- echo "testing ALL supported filesystems"
- ext2="1"
- ext3="1"
- jfs="1"
- xfs="1"
- echo "test run = $run0"
-fi
-
-if [ -n "$ext2" ]; then
- echo "** testing ext2 **"
- run0=$(($run0+1))
-fi
-
-if [ -n "$ext3" ]; then
- echo "** testing ext3 **"
- run0=$(($run0+1))
-fi
-
-if [ -n "$xfs" ]; then
- echo "** testing xfs **"
- run0=$(($run0+1))
-fi
-
-if [ -n "$jfs" ]; then
- echo "** testing jfs **"
- run0=$(($run0+1))
-fi
-
-if [ -n "$part2" -a "$run0" -gt 1 ]; then
- echo "** Running extended stress testing **"
- runExtendedStress=1
-elif [ -n "$part2" -a "$run0" -eq 1 ]; then
- echo " ** You must pass at least 2 filesystems to run an extended AIO stress test **"
- usage;
-fi
-
-if [ "$run0" -eq 0 ]; then
- echo "No filesystems passed to test"
- echo "Please pass at least one supported filesystem or the -a 1 flag to run all "
- usage;
-fi
-
-mkdir $TMP > /dev/null 2>&1
-mkdir $TMP/aiodio > /dev/null 2>&1
-mkdir $TMP/aiodio2 > /dev/null 2>&1
-
-while [ "$runTest" -lt "$run0" ]
-do
-
-echo "runTest=$runTest run0=$run0 nextTest=$nextTest"
-
-if [ -n "$ext2" -a $nextTest -eq 0 ]; then
- echo "***************************"
- echo "* Testing ext2 filesystem *"
- echo "***************************"
- mkfs -t ext2 $part1
- mount -t ext2 $part1 $TMP/aiodio
- if [ "$runExtendedStress" -eq 1 -a -n "$ext3" ]; then
- mkfs -t ext3 $part2
- mount -t ext3 $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$jfs" ]; then
- mkfs.jfs $part2 <testscripts/yesenter.txt
- mount -t jfs $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$xfs" ]; then
- mkfs.xfs -f $part2
- mount -t xfs $part2 $TMP/aiodio2
- fi
-elif [ $nextTest -eq 0 ]; then
- nextTest=$(($nextTest+1))
-fi
-
-if [ -n "$ext3" -a $nextTest -eq 1 ]; then
- echo "***************************"
- echo "* Testing ext3 filesystem *"
- echo "***************************"
- mkfs -t ext3 $part1
- mount -t ext3 $part1 $TMP/aiodio
- if [ "$runExtendedStress" -eq 1 -a -n "$jfs" ]; then
- mkfs.jfs $part2 <testscripts/yesenter.txt
- mount -t jfs $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$xfs" ]; then
- mkfs.xfs -f $part2
- mount -t xfs $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$ext2" ]; then
- mkfs -t ext2 $part2
- mount -t ext2 $part2 $TMP/aiodio2
- fi
-elif [ $nextTest -eq 1 ]; then
- nextTest=$(($nextTest+1))
-fi
-
-if [ -n "$jfs" -a $nextTest -eq 2 ]; then
- echo "**************************"
- echo "* Testing jfs filesystem *"
- echo "**************************"
- mkfs.jfs $part1 <testscripts/yesenter.txt
- mount -t jfs $part1 $TMP/aiodio
- if [ "$runExtendedStress" -eq 1 -a -n "$ext3" ]; then
- mkfs -t ext3 $part2
- mount -t ext3 $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$xfs" ]; then
- mkfs.xfs -f $part2
- mount -t xfs $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$ext2" ]; then
- mkfs -t ext2 $part2
- mount -t ext2 $part2 $TMP/aiodio2
- fi
-elif [ $nextTest -eq 2 ]; then
- nextTest=$(($nextTest+1))
-fi
-
-if [ -n "$xfs" -a $nextTest -eq 3 ]; then
- echo "**************************"
- echo "* Testing xfs filesystem *"
- echo "**************************"
- mkfs.xfs -f $part1
- mount -t xfs $part1 $TMP/aiodio
- if [ "$runExtendedStress" -eq 1 -a -n "$ext2" ]; then
- mkfs -t ext2 $part2
- mount -t ext2 $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$ext3" ]; then
- mkfs -t ext3 $part2
- mount -t ext3 $part2 $TMP/aiodio2
- elif [ "$runExtendedStress" -eq 1 -a -n "$jfs" ]; then
- mkfs.jfs $part2 <testscripts/yesenter.txt
- mount -t jfs $part2 $TMP/aiodio2
- fi
-elif [ $nextTest -eq 3 ]; then
- nextTest=$(($nextTest+1))
-fi
-
-nextTest=$(($nextTest+1))
-runTest=$(($runTest+1))
-
-mkdir $TMP/aiodio/junkdir
-dd if=$file1 of=$TMP/aiodio/junkfile bs=8192 conv=block,sync
-
-date
-echo "************ Running aio-stress tests "
-echo "current working dir = ${PWD}"
-sort -R ${LTPROOT}/runtest/ltp-aio-stress.part1 -o ${TMPBASE}/ltp-aio-stress.part1
-
-${LTPROOT}/bin/ltp-pan -e -S -a ltpaiostresspart1 -n ltp-aiostresspart1 -l ltpaiostress.logfile -o ltpaiostress.outfile -p -f ${TMPBASE}/ltp-aio-stress.part1 &
-
-wait $!
-
-sync
-echo "************ End Running aio-stress tests "
-echo ""
-
-if [ "$runExtendedStress" -eq 1 ];then
-echo "************ Running EXTENDED aio-stress tests "
-sort -R ${LTPROOT}/runtest/ltp-aio-stress.part2 -o ${TMPBASE}/ltp-aio-stress.part2
-
-${LTPROOT}/bin/ltp-pan -e -S -a ltpaiostresspart2 -n ltp-aiostresspart2 -l ltpaiostress.logfile -o ltpaiostress.outfile -p -f ${TMPBASE}/ltp-aio-stress.part2 &
-
-wait $!
-sync
-fi
-
-dd if=$file1 of=$TMP/aiodio/junkfile bs=8192 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/fff bs=4096 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/ff1 bs=2048 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/ff2 bs=1024 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/ff3 bs=512 conv=block,sync
-
-echo "************ Running aiocp tests "
-sort -R ${LTPROOT}/runtest/ltp-aiodio.part1 -o ${TMPBASE}/ltp-aiodio.part1
-
-${LTPROOT}/bin/ltp-pan -e -S -a ltpaiodiopart1 -n ltp-aiodiopart1 -l ltpaiodio1.logfile -o ltpaiodio1.outfile -p -f ${TMPBASE}/ltp-aiodio.part1 &
-
-wait $!
-sync
-echo "************ End Running aiocp tests "
-echo ""
-
-echo "************ Running aiodio_sparse tests "
-sort -R ${LTPROOT}/runtest/ltp-aiodio.part2 -o ${TMPBASE}/ltp-aiodio.part2
-
-${LTPROOT}/bin/ltp-pan -e -S -a ltpaiodiopart2 -n ltp-aiodiopart2 -l ltpaiodio2.logfile -o ltpaiodio2.outfile -p -f ${TMPBASE}/ltp-aiodio.part2 &
-
-wait $!
-sync
-echo "************ End Running aiodio_sparse tests "
-echo ""
-
-
-if [ "$runExtendedStress" -eq 1 ];then
-echo "************ Running fsx-linux tests "
-sort -R ${LTPROOT}/runtest/ltp-aiodio.part3 -o ${TMPBASE}/ltp-aiodio.part3
-
-${LTPROOT}/bin/ltp-pan -e -S -a ltpaiodiopart3 -n ltp-aiodiopart3 -l ltpaiodio3.logfile -o ltpaiodio3.outfile -p -f ${TMPBASE}/ltp-aiodio.part3 &
-
-
-
-wait $!
-sync
-fi
-
-dd if=$file1 of=$TMP/aiodio/file2 bs=2048 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/file3 bs=1024 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/file4 bs=512 conv=block,sync
-dd if=$file1 of=$TMP/aiodio/file5 bs=4096 conv=block,sync
-
-
-
-
-echo "************ Running dio_sparse & miscellaneous tests "
-sort -R ${LTPROOT}/runtest/ltp-aiodio.part4 -o ${TMPBASE}/ltp-aiodio.part4
-${LTPROOT}/bin/ltp-pan -e -S -a ltpaiodiopart4 -n ltp-aiodiopart4 -l ltpaiodio4.logfile -o ltpaiodio4.outfile -p -f ${TMPBASE}/ltp-aiodio.part4 &
-
-wait $!
-sync
-echo "************ End Running dio_sparse & miscellaneous tests "
-echo ""
-
-echo "************ Cleaning/Umounting"
-
-rm -f $TMP/aiodio/fff
-rm -f $TMP/aiodio/ff1
-rm -f $TMP/aiodio/ff2
-rm -f $TMP/aiodio/ff3
-rm -f $TMP/aiodio/junkfile*
-rm -f $TMP/aiodio/file*
-rm -rf $TMP/aiodio/junkdir
-
-umount $part1
-
-if [ "$runExtendedStress" -eq 1 ]; then
- umount $part2
-fi
-
-
-done
-date
-echo "AIO/DIO test complete "
diff --git a/testscripts/yesenter.txt b/testscripts/yesenter.txt
deleted file mode 100644
index 842f4ffd57..0000000000
--- a/testscripts/yesenter.txt
+++ /dev/null
@@ -1,2 +0,0 @@
-y
-
--
2.55.0
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 9+ messages in thread* [LTP] [RFC PATCH 4/4] controllers: Remove obsolete references to ltp-pan
2026-09-03 12:46 [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Petr Vorel
` (2 preceding siblings ...)
2026-09-03 12:46 ` [LTP] [RFC PATCH 3/4] Remove testscripts/ltp-aiodio.sh Petr Vorel
@ 2026-09-03 12:46 ` Petr Vorel
2026-09-03 13:38 ` [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Andrea Cervesato via ltp
2026-09-04 7:55 ` Jan Stancek via ltp
5 siblings, 0 replies; 9+ messages in thread
From: Petr Vorel @ 2026-09-03 12:46 UTC (permalink / raw)
To: ltp; +Cc: Tim Bird, Steffen Jaeckel, automated-testing
Kirk should now be used.
Fixes: 5e5fd4a1ae ("pan: Remove")
Reported-by: Steffen Jaeckel <sjaeckel@suse.de>
Signed-off-by: Petr Vorel <pvorel@suse.cz>
---
testcases/kernel/controllers/cpuctl/run_cpuctl_stress_test.sh | 2 +-
testcases/kernel/controllers/cpuctl/run_cpuctl_test.sh | 4 ++--
2 files changed, 3 insertions(+), 3 deletions(-)
diff --git a/testcases/kernel/controllers/cpuctl/run_cpuctl_stress_test.sh b/testcases/kernel/controllers/cpuctl/run_cpuctl_stress_test.sh
index 5b53544cf0..0920eb9fd5 100755
--- a/testcases/kernel/controllers/cpuctl/run_cpuctl_stress_test.sh
+++ b/testcases/kernel/controllers/cpuctl/run_cpuctl_stress_test.sh
@@ -358,7 +358,7 @@ usage ()
echo TASKS FIRED
echo helloworld > myfifo;
- #wait for the tasks to finish for cleanup and status report to pan
+ #wait for the tasks to finish for cleanup and status report
for i in $(seq 1 $TOTAL_TASKS)
do
wait ${PID[$i]};
diff --git a/testcases/kernel/controllers/cpuctl/run_cpuctl_test.sh b/testcases/kernel/controllers/cpuctl/run_cpuctl_test.sh
index 5b09fb273d..a7bab10625 100755
--- a/testcases/kernel/controllers/cpuctl/run_cpuctl_test.sh
+++ b/testcases/kernel/controllers/cpuctl/run_cpuctl_test.sh
@@ -285,7 +285,7 @@ NUM_CPUS=`tst_ncpus`
echo TASKS FIRED
echo helloworld > myfifo;
- #wait for the tasks to finish for cleanup and status report to pan
+ #wait for the tasks to finish for cleanup and status report
for i in $(seq 1 $TOTAL_TASKS)
do
wait ${PID[$i]};
@@ -304,4 +304,4 @@ NUM_CPUS=`tst_ncpus`
echo "Please review the results in $LTPROOT/output/cpuctl_results_$FILE.txt"
cleanup;
cd $PWD
- exit 0; #to let PAN reprt success of test
+ exit 0;
--
2.55.0
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply related [flat|nested] 9+ messages in thread* Re: [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan)
2026-09-03 12:46 [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Petr Vorel
` (3 preceding siblings ...)
2026-09-03 12:46 ` [LTP] [RFC PATCH 4/4] controllers: Remove obsolete references to ltp-pan Petr Vorel
@ 2026-09-03 13:38 ` Andrea Cervesato via ltp
2026-09-04 7:55 ` Jan Stancek via ltp
5 siblings, 0 replies; 9+ messages in thread
From: Andrea Cervesato via ltp @ 2026-09-03 13:38 UTC (permalink / raw)
To: Petr Vorel; +Cc: Steffen Jaeckel, Tim Bird, ltp, automated-testing
For the series:
Acked-by: Andrea Cervesato <andrea.cervesato@suse.com>
--
Andrea Cervesato
SUSE QE Automation Engineer Linux
andrea.cervesato@suse.com
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 9+ messages in thread* Re: [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan)
2026-09-03 12:46 [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Petr Vorel
` (4 preceding siblings ...)
2026-09-03 13:38 ` [LTP] [RFC PATCH 0/4] testscripts: Remove outdated scripts (ltp-pan) Andrea Cervesato via ltp
@ 2026-09-04 7:55 ` Jan Stancek via ltp
5 siblings, 0 replies; 9+ messages in thread
From: Jan Stancek via ltp @ 2026-09-04 7:55 UTC (permalink / raw)
To: Petr Vorel; +Cc: Tim Bird, Steffen Jaeckel, ltp, automated-testing
On Thu, Sep 3, 2026 at 2:47 PM Petr Vorel <pvorel@suse.cz> wrote:
>
> Hi all,
>
> Steffen reported we still have scripts and doc mentioning ltp-pan.
>
> These tests scripts should not be used by anybody as we have kirk.
> Also, they are not working since ltp-pan removal anyway.
>
> I also wonder if these controllers scripts should still have that ending
> part, which wait for pid. (I'm not even commenting "echo helloworld >
> myfifo").
>
> I'd also prefer to remove realtime scripts:
>
> testcases/realtime/Makefile
> testcases/realtime/run.sh
> testcases/realtime/scripts/Makefile
> testcases/realtime/scripts/__init__.py
> testcases/realtime/scripts/parser.py
> testcases/realtime/scripts/run_c_files.sh
> testcases/realtime/scripts/setenv.sh
> testscripts/test_realtime.sh
>
> Well I'd prefer to convert port pi_perf, prio-wake to rt-tests and
> delete the whole testsuite.
There might be some users, since there has been activity in that area,
12 patches since 2025,
mostly sched_football. (@Li)
>
> https://github.com/linux-test-project/ltp/issues/1078#issuecomment-2212913818
>
> NOTE: I already dared to remove outdated doc without a review:
> https://github.com/linux-test-project/ltp/commit/e2a35f746e6c7893129f1d19eb20d15de0f33d75
> https://github.com/linux-test-project/ltp/commit/252f56dcf371be59abd906654d9e77184a9239e4
>
> Kind regards,
> Petr
>
>
> Petr Vorel (4):
> Remove testscripts/network.sh
> Remove testscripts/tpm_tools.sh
> Remove testscripts/ltp-aiodio.sh
> controllers: Remove obsolete references to ltp-pan
>
> .../cpuctl/run_cpuctl_stress_test.sh | 2 +-
> .../controllers/cpuctl/run_cpuctl_test.sh | 4 +-
> testscripts/ltp-aiodio.sh | 327 ------------------
> testscripts/network.sh | 118 -------
> testscripts/tpm_tools.sh | 173 ---------
> testscripts/yesenter.txt | 2 -
> 6 files changed, 3 insertions(+), 623 deletions(-)
> delete mode 100755 testscripts/ltp-aiodio.sh
> delete mode 100755 testscripts/network.sh
> delete mode 100755 testscripts/tpm_tools.sh
> delete mode 100644 testscripts/yesenter.txt
Acked-by: Jan Stancek <jstancek@redhat.com>
--
Mailing list info: https://lists.linux.it/listinfo/ltp
^ permalink raw reply [flat|nested] 9+ messages in thread