[PATCH mptcp-next 0/4] update userspace pm mptcp

MPTCP Linux Development
 help / color / mirror / Atom feed

* [PATCH mptcp-next 0/4] update userspace pm mptcp_info fields part 3
@ 2023-06-29 13:34 Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars Geliang Tang
                   ` (3 more replies)
  0 siblings, 4 replies; 8+ messages in thread
From: Geliang Tang @ 2023-06-29 13:34 UTC (permalink / raw)
  To: mptcp; +Cc: Geliang Tang

- add three new env vars
- Patch 10 "selftests: mptcp: set endpoint out of transfer" of part 2
 v20 is dropped.

Geliang Tang (4):
  selftests: mptcp: reset all the env vars
  selftests: mptcp: add fastclose env var
  selftests: mptcp: add fullmesh env var
  selftests: mptcp: add speed env var

 .../testing/selftests/net/mptcp/mptcp_join.sh | 257 ++++++++++--------
 1 file changed, 143 insertions(+), 114 deletions(-)

-- 
2.35.3


^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars
  2023-06-29 13:34 [PATCH mptcp-next 0/4] update userspace pm mptcp_info fields part 3 Geliang Tang
@ 2023-06-29 13:34 ` Geliang Tang
  2023-06-29 17:48   ` Matthieu Baerts
  2023-06-29 13:34 ` [PATCH mptcp-next 2/4] selftests: mptcp: add fastclose env var Geliang Tang
                   ` (2 subsequent siblings)
  3 siblings, 1 reply; 8+ messages in thread
From: Geliang Tang @ 2023-06-29 13:34 UTC (permalink / raw)
  To: mptcp; +Cc: Geliang Tang

It's better to clear all the env vars in init_partial(), to let them be
reset before runing the next test.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 ++++
 1 file changed, 4 insertions(+)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index e6c9d5451c5b..b80c5e7b5a7b 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -101,6 +101,10 @@ init_partial()
 	check_invert=0
 	validate_checksum=$checksum
 	FAILING_LINKS=""
+	test_linkfail=0
+	addr_nr_ns1=0
+	addr_nr_ns2=0
+	sflags=""
 
 	#  ns1         ns2
 	# ns1eth1    ns2eth1
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars
  2023-06-29 13:34 ` [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars Geliang Tang
@ 2023-06-29 17:48   ` Matthieu Baerts
  2023-06-29 17:53     ` Matthieu Baerts
  0 siblings, 1 reply; 8+ messages in thread
From: Matthieu Baerts @ 2023-06-29 17:48 UTC (permalink / raw)
  To: Geliang Tang, mptcp

Hi Geliang,

Thank you for looking at that!

On 29/06/2023 15:34, Geliang Tang wrote:
> It's better to clear all the env vars in init_partial(), to let them be
> reset before runing the next test.
> 
> Signed-off-by: Geliang Tang <geliang.tang@suse.com>
> ---
>  tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 ++++
>  1 file changed, 4 insertions(+)
> 
> diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
> index e6c9d5451c5b..b80c5e7b5a7b 100755
> --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
> +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
> @@ -101,6 +101,10 @@ init_partial()
>  	check_invert=0
>  	validate_checksum=$checksum
>  	FAILING_LINKS=""
> +	test_linkfail=0
> +	addr_nr_ns1=0
> +	addr_nr_ns2=0
> +	sflags=""

I think it would be better to move the declaration of these variables to
do_transfer() (or run_tests()) instead of exporting them at the
beginning of the file, no?

You could do something like:

  local test_linkfail=${test_linkfail:-0}

So by default, it will have the value 0. But if you do

  tests_linkfail=3 \
      run_tests (...)

It will have the value 3 just for this test. WDYT?

It looks better than defining the variables globally and resetting them
elsewhere.

Cheers,
Matt
-- 
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net

^ permalink raw reply	[flat|nested] 8+ messages in thread

* Re: [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars
  2023-06-29 17:48   ` Matthieu Baerts
@ 2023-06-29 17:53     ` Matthieu Baerts
  0 siblings, 0 replies; 8+ messages in thread
From: Matthieu Baerts @ 2023-06-29 17:53 UTC (permalink / raw)
  To: Geliang Tang, mptcp

On 29/06/2023 19:48, Matthieu Baerts wrote:
> Hi Geliang,
> 
> Thank you for looking at that!
> 
> On 29/06/2023 15:34, Geliang Tang wrote:
>> It's better to clear all the env vars in init_partial(), to let them be
>> reset before runing the next test.
>>
>> Signed-off-by: Geliang Tang <geliang.tang@suse.com>
>> ---
>>  tools/testing/selftests/net/mptcp/mptcp_join.sh | 4 ++++
>>  1 file changed, 4 insertions(+)
>>
>> diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
>> index e6c9d5451c5b..b80c5e7b5a7b 100755
>> --- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
>> +++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
>> @@ -101,6 +101,10 @@ init_partial()
>>  	check_invert=0
>>  	validate_checksum=$checksum
>>  	FAILING_LINKS=""
>> +	test_linkfail=0
>> +	addr_nr_ns1=0
>> +	addr_nr_ns2=0
>> +	sflags=""
> 
> I think it would be better to move the declaration of these variables to
> do_transfer() (or run_tests()) instead of exporting them at the
> beginning of the file, no?
> 
> You could do something like:
> 
>   local test_linkfail=${test_linkfail:-0}
> 
> So by default, it will have the value 0. But if you do
> 
>   tests_linkfail=3 \
>       run_tests (...)
> 
> It will have the value 3 just for this test. WDYT?
> 
> It looks better than defining the variables globally and resetting them
> elsewhere.

I forgot to say that apart from that (and it is also valid for the new
variables you add in the other patches and even FAILING_LINKS (and maybe
others)), the other modifications you did look good!

Cheers,
Matt
-- 
Tessares | Belgium | Hybrid Access Solutions
www.tessares.net

^ permalink raw reply	[flat|nested] 8+ messages in thread

* [PATCH mptcp-next 2/4] selftests: mptcp: add fastclose env var
  2023-06-29 13:34 [PATCH mptcp-next 0/4] update userspace pm mptcp_info fields part 3 Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars Geliang Tang
@ 2023-06-29 13:34 ` Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 3/4] selftests: mptcp: add fullmesh " Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 4/4] selftests: mptcp: add speed " Geliang Tang
  3 siblings, 0 replies; 8+ messages in thread
From: Geliang Tang @ 2023-06-29 13:34 UTC (permalink / raw)
  To: mptcp; +Cc: Geliang Tang

Use a new env var fastclose instead of passing fastclose to addr_nr_ns2.
It can be set with 'server' or 'client'. Then the fullmesh flag setting
code can be moved into pm_nl_set_endpoint() from do_transfer().

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
---
 .../testing/selftests/net/mptcp/mptcp_join.sh | 21 +++++++++++--------
 1 file changed, 12 insertions(+), 9 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index b80c5e7b5a7b..e1e7ee46e980 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -54,6 +54,7 @@ export test_linkfail=0
 export addr_nr_ns1=0
 export addr_nr_ns2=0
 export sflags=""
+export fastclose=""
 
 # generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
 #				  (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -105,6 +106,7 @@ init_partial()
 	addr_nr_ns1=0
 	addr_nr_ns2=0
 	sflags=""
+	fastclose=""
 
 	#  ns1         ns2
 	# ns1eth1    ns2eth1
@@ -832,6 +834,12 @@ pm_nl_set_endpoint()
 	local connector_ns="$2"
 	local connect_addr="$3"
 
+	local flags="subflow"
+	if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then
+		flags="${flags},fullmesh"
+		addr_nr_ns2=${addr_nr_ns2:9}
+	fi
+
 	# let the mptcp subflow be established in background before
 	# do endpoint manipulation
 	if [ $addr_nr_ns1 != "0" ] || [ $addr_nr_ns2 != "0" ]; then
@@ -1019,11 +1027,10 @@ do_transfer()
 		extra_args="-r ${speed:6}"
 	fi
 
-	local flags="subflow"
 	local extra_cl_args=""
 	local extra_srv_args=""
 	local trunc_size=""
-	if [[ "${addr_nr_ns2}" = "fastclose_"* ]]; then
+	if [ -n "${fastclose}" ]; then
 		if [ ${test_linkfail} -le 1 ]; then
 			echo "fastclose tests need test_linkfail argument"
 			fail_test
@@ -1032,7 +1039,7 @@ do_transfer()
 
 		# disconnect
 		trunc_size=${test_linkfail}
-		local side=${addr_nr_ns2:10}
+		local side=${fastclose}
 
 		if [ ${side} = "client" ]; then
 			extra_cl_args="-f ${test_linkfail}"
@@ -1045,10 +1052,6 @@ do_transfer()
 			fail_test
 			return 1
 		fi
-		addr_nr_ns2=0
-	elif [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then
-		flags="${flags},fullmesh"
-		addr_nr_ns2=${addr_nr_ns2:9}
 	fi
 
 	extra_srv_args="$extra_args $extra_srv_args"
@@ -3184,7 +3187,7 @@ fullmesh_tests()
 fastclose_tests()
 {
 	if reset_check_counter "fastclose test" "MPTcpExtMPFastcloseTx"; then
-		test_linkfail=1024 addr_nr_ns2=fastclose_client \
+		test_linkfail=1024 fastclose=client \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_fclose_nr 1 1
@@ -3192,7 +3195,7 @@ fastclose_tests()
 	fi
 
 	if reset_check_counter "fastclose server test" "MPTcpExtMPFastcloseRx"; then
-		test_linkfail=1024 addr_nr_ns2=fastclose_server \
+		test_linkfail=1024 fastclose=server \
 			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_fclose_nr 1 1 invert
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH mptcp-next 3/4] selftests: mptcp: add fullmesh env var
  2023-06-29 13:34 [PATCH mptcp-next 0/4] update userspace pm mptcp_info fields part 3 Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 2/4] selftests: mptcp: add fastclose env var Geliang Tang
@ 2023-06-29 13:34 ` Geliang Tang
  2023-06-29 13:34 ` [PATCH mptcp-next 4/4] selftests: mptcp: add speed " Geliang Tang
  3 siblings, 0 replies; 8+ messages in thread
From: Geliang Tang @ 2023-06-29 13:34 UTC (permalink / raw)
  To: mptcp; +Cc: Geliang Tang

Use a new env var fullmesh instead of passing 'fullmesh_*' to addr_nr_ns2.
It can be set with the actual value of addr_nr_ns2 now.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
---
 tools/testing/selftests/net/mptcp/mptcp_join.sh | 16 +++++++++-------
 1 file changed, 9 insertions(+), 7 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index e1e7ee46e980..f829fb39ff8c 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -55,6 +55,7 @@ export addr_nr_ns1=0
 export addr_nr_ns2=0
 export sflags=""
 export fastclose=""
+export fullmesh=""
 
 # generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
 #				  (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -107,6 +108,7 @@ init_partial()
 	addr_nr_ns2=0
 	sflags=""
 	fastclose=""
+	fullmesh=""
 
 	#  ns1         ns2
 	# ns1eth1    ns2eth1
@@ -835,9 +837,9 @@ pm_nl_set_endpoint()
 	local connect_addr="$3"
 
 	local flags="subflow"
-	if [[ "${addr_nr_ns2}" = "fullmesh_"* ]]; then
+	if [ -n "${fullmesh}" ]; then
 		flags="${flags},fullmesh"
-		addr_nr_ns2=${addr_nr_ns2:9}
+		addr_nr_ns2=${fullmesh}
 	fi
 
 	# let the mptcp subflow be established in background before
@@ -2687,7 +2689,7 @@ mixed_tests()
 		pm_nl_set_limits $ns2 2 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-		addr_nr_ns2=fullmesh_1 \
+		fullmesh=1 \
 			run_tests $ns1 $ns2 dead:beef:1::1 slow
 		chk_join_nr 4 4 4
 	fi
@@ -3100,7 +3102,7 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 1 3
 		pm_nl_set_limits $ns2 1 3
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		addr_nr_ns2=fullmesh_1 \
+		fullmesh=1 \
 			run_tests $ns1 $ns2 10.0.1.1 slow
 		chk_join_nr 3 3 3
 		chk_add_nr 1 1
@@ -3113,7 +3115,7 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 2 5
 		pm_nl_set_limits $ns2 1 5
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		addr_nr_ns2=fullmesh_2 \
+		fullmesh=2 \
 			run_tests $ns1 $ns2 10.0.1.1 slow
 		chk_join_nr 5 5 5
 		chk_add_nr 1 1
@@ -3127,7 +3129,7 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 2 4
 		pm_nl_set_limits $ns2 1 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		addr_nr_ns2=fullmesh_2 \
+		fullmesh=2 \
 			run_tests $ns1 $ns2 10.0.1.1 slow
 		chk_join_nr 4 4 4
 		chk_add_nr 1 1
@@ -3151,7 +3153,7 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
 		pm_nl_set_limits $ns2 4 4
-		addr_nr_ns2=fullmesh_1 sflags=nofullmesh \
+		fullmesh=1 sflags=nofullmesh \
 			run_tests $ns1 $ns2 10.0.1.1 slow
 		chk_join_nr 2 2 2
 		chk_rm_nr 0 1
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* [PATCH mptcp-next 4/4] selftests: mptcp: add speed env var
  2023-06-29 13:34 [PATCH mptcp-next 0/4] update userspace pm mptcp_info fields part 3 Geliang Tang
                   ` (2 preceding siblings ...)
  2023-06-29 13:34 ` [PATCH mptcp-next 3/4] selftests: mptcp: add fullmesh " Geliang Tang
@ 2023-06-29 13:34 ` Geliang Tang
  2023-06-29 20:33   ` selftests: mptcp: add speed env var: Tests Results MPTCP CI
  3 siblings, 1 reply; 8+ messages in thread
From: Geliang Tang @ 2023-06-29 13:34 UTC (permalink / raw)
  To: mptcp; +Cc: Geliang Tang

Use a new env var speed instead of using 'speed' argument of run_tests()
and do_transfer(). It can be set with 'fast', 'slow', or the actual speed
number.

Signed-off-by: Geliang Tang <geliang.tang@suse.com>
---
 .../testing/selftests/net/mptcp/mptcp_join.sh | 230 ++++++++++--------
 1 file changed, 125 insertions(+), 105 deletions(-)

diff --git a/tools/testing/selftests/net/mptcp/mptcp_join.sh b/tools/testing/selftests/net/mptcp/mptcp_join.sh
index f829fb39ff8c..a80b3bd5430c 100755
--- a/tools/testing/selftests/net/mptcp/mptcp_join.sh
+++ b/tools/testing/selftests/net/mptcp/mptcp_join.sh
@@ -56,6 +56,7 @@ export addr_nr_ns2=0
 export sflags=""
 export fastclose=""
 export fullmesh=""
+export speed="fast"
 
 # generated using "nfbpf_compile '(ip && (ip[54] & 0xf0) == 0x30) ||
 #				  (ip6 && (ip6[74] & 0xf0) == 0x30)'"
@@ -109,6 +110,7 @@ init_partial()
 	sflags=""
 	fastclose=""
 	fullmesh=""
+	speed="fast"
 
 	#  ns1         ns2
 	# ns1eth1    ns2eth1
@@ -989,7 +991,6 @@ do_transfer()
 	local cl_proto="$3"
 	local srv_proto="$4"
 	local connect_addr="$5"
-	local speed="$6"
 
 	local port=$((10000 + TEST_COUNT - 1))
 	local cappid
@@ -1025,8 +1026,8 @@ do_transfer()
 		extra_args="-j"
 	elif [ $speed = "slow" ]; then
 		extra_args="-r 50"
-	elif [[ $speed = "speed_"* ]]; then
-		extra_args="-r ${speed:6}"
+	elif [ $speed -gt 0 ]; then
+		extra_args="-r ${speed}"
 	fi
 
 	local extra_cl_args=""
@@ -1164,7 +1165,6 @@ run_tests()
 	local listener_ns="$1"
 	local connector_ns="$2"
 	local connect_addr="$3"
-	local speed="${4:-fast}"
 
 	local size
 
@@ -1208,7 +1208,7 @@ run_tests()
 		make_file "$sinfail" "server" $size
 	fi
 
-	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr} ${speed}
+	do_transfer ${listener_ns} ${connector_ns} MPTCP MPTCP ${connect_addr}
 }
 
 dump_stats()
@@ -1997,7 +1997,8 @@ subflows_error_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 	fi
 
@@ -2008,7 +2009,8 @@ subflows_error_tests()
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 	fi
 
@@ -2019,7 +2021,8 @@ subflows_error_tests()
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 	fi
 
@@ -2031,7 +2034,8 @@ subflows_error_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		run_tests $ns1 $ns2 10.0.1.1 slow &
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1 &
 
 		# mpj subflow will be in TW after the reset
 		wait_attempt_fail $ns2
@@ -2130,7 +2134,8 @@ signal_address_tests()
 
 		# the peer could possibly miss some addr notification, allow retransmission
 		ip netns exec $ns1 sysctl -q net.mptcp.add_addr_timeout=1
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 
 		# It is not directly linked to the commit introducing this
 		# symbol but for the parent one which is linked anyway.
@@ -2240,7 +2245,8 @@ add_addr_timeout_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_tx_nr 4 4
 		chk_add_nr 4 0
@@ -2251,7 +2257,8 @@ add_addr_timeout_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-		run_tests $ns1 $ns2 dead:beef:1::1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 1 1 1
 		chk_add_nr 4 0
 	fi
@@ -2262,7 +2269,8 @@ add_addr_timeout_tests()
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
 		pm_nl_set_limits $ns2 2 2
-		run_tests $ns1 $ns2 10.0.1.1 speed_10
+		speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_add_nr 8 0
 	fi
@@ -2273,7 +2281,8 @@ add_addr_timeout_tests()
 		pm_nl_add_endpoint $ns1 10.0.12.1 flags signal
 		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
 		pm_nl_set_limits $ns2 2 2
-		run_tests $ns1 $ns2 10.0.1.1 speed_10
+		speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 8 0
 	fi
@@ -2286,8 +2295,8 @@ remove_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		addr_nr_ns2=-1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=-1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_rm_tx_nr 1
 		chk_rm_nr 1 1
@@ -2299,8 +2308,8 @@ remove_tests()
 		pm_nl_set_limits $ns2 0 2
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		addr_nr_ns2=-2 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=-2 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_rm_nr 2 2
 	fi
@@ -2310,8 +2319,8 @@ remove_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
-		addr_nr_ns1=-1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 		chk_rm_nr 1 1 invert
@@ -2323,8 +2332,8 @@ remove_tests()
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		addr_nr_ns1=-1 addr_nr_ns2=-1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_add_nr 1 1
 		chk_rm_nr 1 1
@@ -2337,8 +2346,8 @@ remove_tests()
 		pm_nl_set_limits $ns2 1 3
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-		addr_nr_ns1=-1 addr_nr_ns2=-2 \
-			run_tests $ns1 $ns2 10.0.1.1 speed_10
+		addr_nr_ns1=-1 addr_nr_ns2=-2 speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 		chk_add_nr 1 1
 		chk_rm_nr 2 2
@@ -2351,8 +2360,8 @@ remove_tests()
 		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
 		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
 		pm_nl_set_limits $ns2 3 3
-		addr_nr_ns1=-3 \
-			run_tests $ns1 $ns2 10.0.1.1 speed_10
+		addr_nr_ns1=-3 speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 		chk_add_nr 3 3
 		chk_rm_nr 3 3 invert
@@ -2365,8 +2374,8 @@ remove_tests()
 		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
 		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
 		pm_nl_set_limits $ns2 3 3
-		addr_nr_ns1=-3 \
-			run_tests $ns1 $ns2 10.0.1.1 speed_10
+		addr_nr_ns1=-3 speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 3 3
 		chk_rm_nr 3 1 invert
@@ -2379,8 +2388,8 @@ remove_tests()
 		pm_nl_set_limits $ns2 1 3
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-		addr_nr_ns1=-8 addr_nr_ns2=-8 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 		chk_add_nr 1 1
 		chk_rm_nr 1 3 invert simult
@@ -2393,8 +2402,8 @@ remove_tests()
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow id 150
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-		addr_nr_ns1=-8 addr_nr_ns2=-8 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 
 		if mptcp_lib_kversion_ge 5.18; then
@@ -2412,8 +2421,8 @@ remove_tests()
 		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
 		pm_nl_add_endpoint $ns1 10.0.4.1 flags signal
 		pm_nl_set_limits $ns2 3 3
-		addr_nr_ns1=-8 addr_nr_ns2=-8 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-8 addr_nr_ns2=-8 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 		chk_add_nr 3 3
 		chk_rm_nr 3 3 invert simult
@@ -2426,8 +2435,8 @@ remove_tests()
 		pm_nl_add_endpoint $ns1 10.0.3.1 flags signal
 		pm_nl_add_endpoint $ns1 10.0.14.1 flags signal
 		pm_nl_set_limits $ns2 3 3
-		addr_nr_ns1=-8 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-8 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 3 3
 		chk_rm_nr 3 1 invert
@@ -2438,8 +2447,8 @@ remove_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		addr_nr_ns2=-9 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=-9 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_rm_nr 1 1
 	fi
@@ -2449,8 +2458,8 @@ remove_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
-		addr_nr_ns1=-9 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-9 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 		chk_rm_nr 1 1 invert
@@ -2463,8 +2472,8 @@ add_tests()
 	if reset "add single subflow"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
-		addr_nr_ns2=1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 	fi
 
@@ -2472,8 +2481,8 @@ add_tests()
 	if reset "add signal address"; then
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
-		addr_nr_ns1=1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 	fi
@@ -2482,8 +2491,8 @@ add_tests()
 	if reset "add multiple subflows"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
-		addr_nr_ns2=2 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=2 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 	fi
 
@@ -2491,8 +2500,8 @@ add_tests()
 	if reset "add multiple subflows IPv6"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 0 2
-		addr_nr_ns2=2 \
-			run_tests $ns1 $ns2 dead:beef:1::1 slow
+		addr_nr_ns2=2 speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 2 2 2
 	fi
 
@@ -2500,8 +2509,8 @@ add_tests()
 	if reset "add multiple addresses IPv6"; then
 		pm_nl_set_limits $ns1 0 2
 		pm_nl_set_limits $ns2 2 2
-		addr_nr_ns1=2 \
-			run_tests $ns1 $ns2 dead:beef:1::1 slow
+		addr_nr_ns1=2 speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 2 2 2
 		chk_add_nr 2 2
 	fi
@@ -2514,14 +2523,16 @@ ipv6_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
-		run_tests $ns1 $ns2 dead:beef:1::1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 1 1 1
 	fi
 
 	# add_address, unused IPv6
 	if reset "unused signal address IPv6"; then
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-		run_tests $ns1 $ns2 dead:beef:1::1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 0 0 0
 		chk_add_nr 1 1
 	fi
@@ -2531,7 +2542,8 @@ ipv6_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
 		pm_nl_set_limits $ns2 1 1
-		run_tests $ns1 $ns2 dead:beef:1::1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 	fi
@@ -2541,8 +2553,8 @@ ipv6_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
 		pm_nl_set_limits $ns2 1 1
-		addr_nr_ns1=-1 \
-			run_tests $ns1 $ns2 dead:beef:1::1 slow
+		addr_nr_ns1=-1 speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 		chk_rm_nr 1 1 invert
@@ -2554,8 +2566,8 @@ ipv6_tests()
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
 		pm_nl_set_limits $ns2 1 2
 		pm_nl_add_endpoint $ns2 dead:beef:3::2 dev ns2eth3 flags subflow
-		addr_nr_ns1=-1 addr_nr_ns2=-1 \
-			run_tests $ns1 $ns2 dead:beef:1::1 slow
+		addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 2 2 2
 		chk_add_nr 1 1
 		chk_rm_nr 1 1
@@ -2656,7 +2668,8 @@ mixed_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 	fi
 
@@ -2666,7 +2679,8 @@ mixed_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
-		run_tests $ns1 $ns2 dead:beef:2::1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 dead:beef:2::1
 		chk_join_nr 1 1 1
 	fi
 
@@ -2677,7 +2691,8 @@ mixed_tests()
 		pm_nl_set_limits $ns2 1 4
 		pm_nl_add_endpoint $ns2 dead:beef:2::2 flags subflow,fullmesh
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags signal
-		run_tests $ns1 $ns2 dead:beef:2::1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 dead:beef:2::1
 		chk_join_nr 1 1 1
 	fi
 
@@ -2689,8 +2704,8 @@ mixed_tests()
 		pm_nl_set_limits $ns2 2 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_add_endpoint $ns1 dead:beef:2::1 flags signal
-		fullmesh=1 \
-			run_tests $ns1 $ns2 dead:beef:1::1 slow
+		fullmesh=1 speed=slow \
+			run_tests $ns1 $ns2 dead:beef:1::1
 		chk_join_nr 4 4 4
 	fi
 }
@@ -2703,8 +2718,8 @@ backup_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,backup
-		sflags=nobackup \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=nobackup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_prio_nr 0 1
 	fi
@@ -2715,8 +2730,8 @@ backup_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
 		pm_nl_set_limits $ns2 1 1
-		sflags=backup \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=backup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 		chk_prio_nr 1 1
@@ -2728,8 +2743,8 @@ backup_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
 		pm_nl_set_limits $ns2 1 1
-		sflags=backup \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=backup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1
 		chk_prio_nr 1 1
@@ -2738,7 +2753,8 @@ backup_tests()
 	if reset "mpc backup" &&
 	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_prio_nr 0 1
 	fi
@@ -2747,7 +2763,8 @@ backup_tests()
 	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow,backup
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow,backup
-		run_tests $ns1 $ns2 10.0.1.1 slow
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_prio_nr 1 1
 	fi
@@ -2755,8 +2772,8 @@ backup_tests()
 	if reset "mpc switch to backup" &&
 	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
-		sflags=backup \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=backup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_prio_nr 0 1
 	fi
@@ -2765,8 +2782,8 @@ backup_tests()
 	   continue_if mptcp_lib_kallsyms_doesnt_have "mptcp_subflow_send_ack$"; then
 		pm_nl_add_endpoint $ns1 10.0.1.1 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.1.2 flags subflow
-		sflags=backup \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=backup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_prio_nr 1 1
 	fi
@@ -2855,8 +2872,8 @@ add_addr_ports_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
 		pm_nl_set_limits $ns2 1 1
-		addr_nr_ns1=-1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 1
 		chk_add_nr 1 1 1
 		chk_rm_nr 1 1 invert
@@ -2872,8 +2889,8 @@ add_addr_ports_tests()
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal port 10100
 		pm_nl_set_limits $ns2 1 2
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		addr_nr_ns1=-1 addr_nr_ns2=-1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-1 addr_nr_ns2=-1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_add_nr 1 1 1
 		chk_rm_nr 1 1
@@ -2886,8 +2903,8 @@ add_addr_ports_tests()
 		pm_nl_set_limits $ns2 1 3
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
 		pm_nl_add_endpoint $ns2 10.0.4.2 flags subflow
-		addr_nr_ns1=-8 addr_nr_ns2=-2 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=-8 addr_nr_ns2=-2 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 		chk_add_nr 1 1
 		chk_rm_nr 1 3 invert simult
@@ -3089,8 +3106,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns2 1 4
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,fullmesh
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow,fullmesh
-		addr_nr_ns1=1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns1=1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 4 4 4
 		chk_add_nr 1 1
 	fi
@@ -3102,8 +3119,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 1 3
 		pm_nl_set_limits $ns2 1 3
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		fullmesh=1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		fullmesh=1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 3 3 3
 		chk_add_nr 1 1
 	fi
@@ -3115,8 +3132,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 2 5
 		pm_nl_set_limits $ns2 1 5
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		fullmesh=2 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		fullmesh=2 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 5 5 5
 		chk_add_nr 1 1
 	fi
@@ -3129,8 +3146,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 2 4
 		pm_nl_set_limits $ns2 1 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		fullmesh=2 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		fullmesh=2 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 4 4 4
 		chk_add_nr 1 1
 	fi
@@ -3141,8 +3158,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
 		pm_nl_set_limits $ns2 4 4
-		addr_nr_ns2=1 sflags=fullmesh \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=1 sflags=fullmesh speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_rm_nr 0 1
 	fi
@@ -3153,8 +3170,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow,fullmesh
 		pm_nl_set_limits $ns2 4 4
-		fullmesh=1 sflags=nofullmesh \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		fullmesh=1 sflags=nofullmesh speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_rm_nr 0 1
 	fi
@@ -3165,8 +3182,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags subflow
 		pm_nl_set_limits $ns2 4 4
-		addr_nr_ns2=1 sflags=backup,fullmesh \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=1 sflags=backup,fullmesh speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_prio_nr 0 1
 		chk_rm_nr 0 1
@@ -3178,8 +3195,8 @@ fullmesh_tests()
 		pm_nl_set_limits $ns1 4 4
 		pm_nl_set_limits $ns2 4 4
 		pm_nl_add_endpoint $ns2 10.0.2.2 flags subflow,backup,fullmesh
-		sflags=nobackup,nofullmesh \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=nobackup,nofullmesh speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 2 2 2
 		chk_prio_nr 0 1
 		chk_rm_nr 0 1
@@ -3354,8 +3371,8 @@ userspace_tests()
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		sflags=backup \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		sflags=backup speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 1 1 0
 		chk_prio_nr 0 0
 	fi
@@ -3368,8 +3385,8 @@ userspace_tests()
 		pm_nl_set_limits $ns1 0 1
 		pm_nl_set_limits $ns2 0 1
 		pm_nl_add_endpoint $ns2 10.0.3.2 flags subflow
-		addr_nr_ns2=-1 \
-			run_tests $ns1 $ns2 10.0.1.1 slow
+		addr_nr_ns2=-1 speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1
 		chk_join_nr 0 0 0
 		chk_rm_nr 0 0
 	fi
@@ -3379,7 +3396,8 @@ userspace_tests()
 	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns1
 		pm_nl_set_limits $ns2 1 1
-		run_tests $ns1 $ns2 10.0.1.1 speed_10 &
+		speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1 &
 		local tests_pid=$!
 		wait_mpj $ns1
 		userspace_pm_add_addr 10.0.2.1 10
@@ -3399,7 +3417,8 @@ userspace_tests()
 	   continue_if mptcp_lib_has_file '/proc/sys/net/mptcp/pm_type'; then
 		set_userspace_pm $ns2
 		pm_nl_set_limits $ns1 0 1
-		run_tests $ns1 $ns2 10.0.1.1 speed_10 &
+		speed=10 \
+			run_tests $ns1 $ns2 10.0.1.1 &
 		local tests_pid=$!
 		wait_mpj $ns2
 		userspace_pm_add_sf 10.0.3.2 20
@@ -3422,7 +3441,8 @@ endpoint_tests()
 		pm_nl_set_limits $ns1 2 2
 		pm_nl_set_limits $ns2 2 2
 		pm_nl_add_endpoint $ns1 10.0.2.1 flags signal
-		run_tests $ns1 $ns2 10.0.1.1 slow 2>/dev/null &
+		speed=slow \
+			run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
 
 		wait_mpj $ns1
 		pm_nl_check_endpoint 1 "creation" \
@@ -3445,8 +3465,8 @@ endpoint_tests()
 		pm_nl_set_limits $ns1 1 1
 		pm_nl_set_limits $ns2 1 1
 		pm_nl_add_endpoint $ns2 10.0.2.2 id 2 dev ns2eth2 flags subflow
-		test_linkfail=4 \
-			run_tests $ns1 $ns2 10.0.1.1 speed_20 2>/dev/null &
+		test_linkfail=4 speed=20 \
+			run_tests $ns1 $ns2 10.0.1.1 2>/dev/null &
 
 		wait_mpj $ns2
 		chk_subflow_nr needtitle "before delete" 2
-- 
2.35.3


^ permalink raw reply related	[flat|nested] 8+ messages in thread

* Re: selftests: mptcp: add speed env var: Tests Results
  2023-06-29 13:34 ` [PATCH mptcp-next 4/4] selftests: mptcp: add speed " Geliang Tang
@ 2023-06-29 20:33   ` MPTCP CI
  0 siblings, 0 replies; 8+ messages in thread
From: MPTCP CI @ 2023-06-29 20:33 UTC (permalink / raw)
  To: Geliang Tang; +Cc: mptcp

Hi Geliang,

Thank you for your modifications, that's great!

Our CI did some validations and here is its report:

- {"code":404,"message":
  - "Can't find artifacts containing file conclusion.txt"}:
  - Task: https://cirrus-ci.com/task/4797490306744320
  - Summary: https://api.cirrus-ci.com/v1/artifact/task/4797490306744320/summary/summary.txt

- {"code":404,"message":
  - "Can't find artifacts containing file conclusion.txt"}:
  - Task: https://cirrus-ci.com/task/4993086875500544
  - Summary: https://api.cirrus-ci.com/v1/artifact/task/4993086875500544/summary/summary.txt

- KVM Validation: debug (only selftest_mptcp_join):
  - Success! ✅:
  - Task: https://cirrus-ci.com/task/5916780074369024
  - Summary: https://api.cirrus-ci.com/v1/artifact/task/5916780074369024/summary/summary.txt

- KVM Validation: debug (except selftest_mptcp_join):
  - Success! ✅:
  - Task: https://cirrus-ci.com/task/4790880167526400
  - Summary: https://api.cirrus-ci.com/v1/artifact/task/4790880167526400/summary/summary.txt

Initiator: Patchew Applier
Commits: https://github.com/multipath-tcp/mptcp_net-next/commits/f3fddd565b40


If there are some issues, you can reproduce them using the same environment as
the one used by the CI thanks to a docker image, e.g.:

    $ cd [kernel source code]
    $ docker run -v "${PWD}:${PWD}:rw" -w "${PWD}" --privileged --rm -it \
        --pull always mptcp/mptcp-upstream-virtme-docker:latest \
        auto-debug

For more details:

    https://github.com/multipath-tcp/mptcp-upstream-virtme-docker


Please note that despite all the efforts that have been already done to have a
stable tests suite when executed on a public CI like here, it is possible some
reported issues are not due to your modifications. Still, do not hesitate to
help us improve that ;-)

Cheers,
MPTCP GH Action bot
Bot operated by Matthieu Baerts (Tessares)

^ permalink raw reply	[flat|nested] 8+ messages in thread

end of thread, other threads:[~2023-06-29 20:33 UTC | newest]

Thread overview: 8+ messages (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2023-06-29 13:34 [PATCH mptcp-next 0/4] update userspace pm mptcp_info fields part 3 Geliang Tang
2023-06-29 13:34 ` [PATCH mptcp-next 1/4] selftests: mptcp: reset all the env vars Geliang Tang
2023-06-29 17:48   ` Matthieu Baerts
2023-06-29 17:53     ` Matthieu Baerts
2023-06-29 13:34 ` [PATCH mptcp-next 2/4] selftests: mptcp: add fastclose env var Geliang Tang
2023-06-29 13:34 ` [PATCH mptcp-next 3/4] selftests: mptcp: add fullmesh " Geliang Tang
2023-06-29 13:34 ` [PATCH mptcp-next 4/4] selftests: mptcp: add speed " Geliang Tang
2023-06-29 20:33   ` selftests: mptcp: add speed env var: Tests Results MPTCP CI

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox