From: Andrew Lunn <andrew@lunn.ch>
To: Julien Blanc <julien.blanc@sprinte.eu>
Cc: "netdev@vger.kernel.org" <netdev@vger.kernel.org>,
"o.rempel@pengutronix.de" <o.rempel@pengutronix.de>,
"hkallweit1@gmail.com" <hkallweit1@gmail.com>
Subject: Re: [PATCH v2] Add config phase for dp83td510e phy
Date: Tue, 8 Sep 2026 13:56:18 +0200 [thread overview]
Message-ID: <00b4abdd-4a6b-4013-a235-bbf11769af75@lunn.ch> (raw)
In-Reply-To: <d304c248bc54092d2302adebc2076ff2a9e7b3e4.camel@sprinte.eu>
On Tue, Sep 08, 2026 at 10:08:43AM +0000, Julien Blanc wrote:
> Add a config phase for the Texas Instruments DP83TD510E ethenet PHY
>
> The config phase currently sets the following properties from the
> device tree:
> * RMII / RGMII mode (note : RMII master / slave can only be set
> by straps and cannot be changed at runtime)
> * RGMII delays. These delays can be enabled on the phy side, only
> as a boolean. Delays are enabled if phy-mode is rgmii-id, or
> rgmii-[rx|tx]id which enables only the corresponding delay.
>
> Signed-off-by: Julien Blanc <julien.blanc@sprinte.eu>
Reviewed-by: Andrew Lunn <andrew@lunn.ch>
Andrew
next prev parent reply other threads:[~2026-09-08 11:56 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2026-09-08 10:08 [PATCH v2] Add config phase for dp83td510e phy Julien Blanc
2026-09-08 11:56 ` Andrew Lunn [this message]
2026-09-11 23:29 ` Jakub Kicinski
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=00b4abdd-4a6b-4013-a235-bbf11769af75@lunn.ch \
--to=andrew@lunn.ch \
--cc=hkallweit1@gmail.com \
--cc=julien.blanc@sprinte.eu \
--cc=netdev@vger.kernel.org \
--cc=o.rempel@pengutronix.de \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox