Re: [PATCH v1 6/9] hwmon: Add Nuvoton NCT6694 HWMON support

[Guenter Roeck <linux@roeck-us.net>]

On 10/25/24 08:44, Guenter Roeck wrote:
> On 10/25/24 08:22, Ming Yu wrote:
> [ ... ]
> 
>>>>> +static int nct6694_fan_write(struct device *dev, u32 attr, int channel,
>>>>> +                            long val)
>>>>> +{
>>>>> +       struct nct6694_hwmon_data *data = dev_get_drvdata(dev);
>>>>> +       unsigned char enable_buf[REQUEST_HWMON_CMD0_LEN] = {0};
>>>> [Kalesh] Please try to maintain RCT order for variable declaration
>>>
>>> Ok, but that is already the case here ?
>>
>> [Ming] Is there anything that needs to be changed?
>>
> 
> I don't think so, If two lines have the same length, the order is up
> to the developer to decide.
> 
> Question though is if the buffer needs to be initialized. You should drop
> the initialization if it is not necessary. In that case the second line
> would be shorter anyway, and the order question would not arise.
> 

Actually, I just noticed that you also submitted an IIO driver which
reports the same data again. If a chip has an IIO driver, there should
be no HWMON driver since the IIO -> HWMON bridge can then be used if
necessary. So please drop this driver.

Thanks,
Guenter