Re: [PATCH] Fix asix-based gigabit cards connecting to 10 or 100Mbs networks

[David Hollis <dhollis@davehollis.com>]

On Mon, 2008-11-17 at 20:41 +0200, Pantelis Koukousoulas wrote:
> Add AX_MEDIUM_ENCK also when speed = 10/100Mbps. This allows my belkin
>  f5d5055 to work with my 100Mbps switch and with an old 10Mbps ISA card.
>  Without this patch, the card is recognized and the interface is brought
>  up fine, but no packets actually flow through the interface.
> 

Please apply.

Thanks.

>  Signed-off-by: Pantelis Koukousoulas <pktoss@gmail.com>
>  Acked-by: David Hollis <dhollis@davehollis.com>
> 
>  Index: linux-next/drivers/net/usb/
>  asix.c
>  ===================================================================
>  --- linux-next.orig/drivers/net/usb/asix.c      2008-11-04
>  19:51:06.000000000 +0200
>  +++ linux-next/drivers/net/usb/asix.c   2008-11-04 21:32:55.000000000 +0200
>  @@ -1102,12 +1102,14 @@
>         mode = AX88178_MEDIUM_DEFAULT;
> 
>         if (ecmd.speed == SPEED_1000)
>  -               mode |= AX_MEDIUM_GM | AX_MEDIUM_ENCK;
>  +               mode |= AX_MEDIUM_GM;
>         else if (ecmd.speed == SPEED_100)
>                 mode |= AX_MEDIUM_PS;
>         else
>                 mode &= ~(AX_MEDIUM_PS | AX_MEDIUM_GM);
> 
>  +       mode |= AX_MEDIUM_ENCK;
>  +
>         if (ecmd.duplex == DUPLEX_FULL)
> --
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at  http://vger.kernel.org/majordomo-info.html