From: Vincent Sanders <vince@simtec.co.uk>
To: netdev@vger.kernel.org
Cc: Vincent Sanders <vince@simtec.co.uk>
Subject: [PATCH] Fix IXP 2000 network driver building.
Date: Sun, 11 Oct 2009 16:55:46 +0100 [thread overview]
Message-ID: <1255276546-31903-1-git-send-email-vince@simtec.co.uk> (raw)
The IXP 2000 network driver was failing to build as it has its own
statistics gathering which was not compatible with the recent network
device operations changes. This patch fixes the driver in the obvious
way and has been compile tested. I have been unable to get the ixp2000
maintainer to comment or test this fix.
Signed-off-by: Vincent Sanders <vince@simtec.co.uk>
---
drivers/net/ixp2000/enp2611.c | 18 +-----------------
drivers/net/ixp2000/ixpdev.c | 11 +++++++++++
drivers/net/ixp2000/ixpdev.h | 1 +
3 files changed, 13 insertions(+), 17 deletions(-)
diff --git a/drivers/net/ixp2000/enp2611.c b/drivers/net/ixp2000/enp2611.c
index b02a981..34a6cfd 100644
--- a/drivers/net/ixp2000/enp2611.c
+++ b/drivers/net/ixp2000/enp2611.c
@@ -119,24 +119,9 @@ static struct ixp2400_msf_parameters enp2611_msf_parameters =
}
};
-struct enp2611_ixpdev_priv
-{
- struct ixpdev_priv ixpdev_priv;
- struct net_device_stats stats;
-};
-
static struct net_device *nds[3];
static struct timer_list link_check_timer;
-static struct net_device_stats *enp2611_get_stats(struct net_device *dev)
-{
- struct enp2611_ixpdev_priv *ip = netdev_priv(dev);
-
- pm3386_get_stats(ip->ixpdev_priv.channel, &(ip->stats));
-
- return &(ip->stats);
-}
-
/* @@@ Poll the SFP moddef0 line too. */
/* @@@ Try to use the pm3386 DOOL interrupt as well. */
static void enp2611_check_link_status(unsigned long __dummy)
@@ -203,14 +188,13 @@ static int __init enp2611_init_module(void)
ports = pm3386_port_count();
for (i = 0; i < ports; i++) {
- nds[i] = ixpdev_alloc(i, sizeof(struct enp2611_ixpdev_priv));
+ nds[i] = ixpdev_alloc(i, sizeof(struct ixpdev_priv));
if (nds[i] == NULL) {
while (--i >= 0)
free_netdev(nds[i]);
return -ENOMEM;
}
- nds[i]->get_stats = enp2611_get_stats;
pm3386_init_port(i);
pm3386_get_mac(i, nds[i]->dev_addr);
}
diff --git a/drivers/net/ixp2000/ixpdev.c b/drivers/net/ixp2000/ixpdev.c
index 1272434..79cb6fa 100644
--- a/drivers/net/ixp2000/ixpdev.c
+++ b/drivers/net/ixp2000/ixpdev.c
@@ -21,6 +21,7 @@
#include "ixp2400_tx.ucode"
#include "ixpdev_priv.h"
#include "ixpdev.h"
+#include "pm3386.h"
#define DRV_MODULE_VERSION "0.2"
@@ -271,6 +272,15 @@ static int ixpdev_close(struct net_device *dev)
return 0;
}
+static struct net_device_stats *ixpdev_get_stats(struct net_device *dev)
+{
+ struct ixpdev_priv *ip = netdev_priv(dev);
+
+ pm3386_get_stats(ip->channel, &(ip->stats));
+
+ return &(ip->stats);
+}
+
static const struct net_device_ops ixpdev_netdev_ops = {
.ndo_open = ixpdev_open,
.ndo_stop = ixpdev_close,
@@ -278,6 +288,7 @@ static const struct net_device_ops ixpdev_netdev_ops = {
.ndo_change_mtu = eth_change_mtu,
.ndo_validate_addr = eth_validate_addr,
.ndo_set_mac_address = eth_mac_addr,
+ .ndo_get_stats = ixpdev_get_stats,
#ifdef CONFIG_NET_POLL_CONTROLLER
.ndo_poll_controller = ixpdev_poll_controller,
#endif
diff --git a/drivers/net/ixp2000/ixpdev.h b/drivers/net/ixp2000/ixpdev.h
index 391ece6..bf235e9 100644
--- a/drivers/net/ixp2000/ixpdev.h
+++ b/drivers/net/ixp2000/ixpdev.h
@@ -18,6 +18,7 @@ struct ixpdev_priv
struct napi_struct napi;
int channel;
int tx_queue_entries;
+ struct net_device_stats stats;
};
struct net_device *ixpdev_alloc(int channel, int sizeof_priv);
--
1.6.0.4
next reply other threads:[~2009-10-12 11:40 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2009-10-11 15:55 Vincent Sanders [this message]
2009-10-12 12:10 ` [PATCH] Fix IXP 2000 network driver building Ben Hutchings
2009-10-12 12:45 ` Vincent Sanders
-- strict thread matches above, loose matches on Subject: below --
2009-10-12 19:46 Vincent Sanders
2009-10-13 7:03 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1255276546-31903-1-git-send-email-vince@simtec.co.uk \
--to=vince@simtec.co.uk \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox