Netdev List
 help / color / mirror / Atom feed
* [PATCH net-next 2/7] bnx2x: store module parameters in driver main structure
@ 2010-07-27 19:05 Dmitry Kravkov
  0 siblings, 0 replies; only message in thread
From: Dmitry Kravkov @ 2010-07-27 19:05 UTC (permalink / raw)
  To: davem, netdev; +Cc: eilong

Store module parameters during initialization of main driver
structure. This will allow access to the parameters from different
files.

Signed-off-by: Dmitry Kravkov <dmitry@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/bnx2x/bnx2x.h      |    2 ++
 drivers/net/bnx2x/bnx2x_main.c |    7 ++++---
 2 files changed, 6 insertions(+), 3 deletions(-)

diff --git a/drivers/net/bnx2x/bnx2x.h b/drivers/net/bnx2x/bnx2x.h
index 3b51c5f..237609f 100644
--- a/drivers/net/bnx2x/bnx2x.h
+++ b/drivers/net/bnx2x/bnx2x.h
@@ -1006,6 +1006,8 @@ struct bnx2x {
 
 	int			multi_mode;
 	int			num_queues;
+	int			disable_tpa;
+	int			int_mode;
 
 	u32			rx_mode;
 #define BNX2X_RX_MODE_NONE		0
diff --git a/drivers/net/bnx2x/bnx2x_main.c b/drivers/net/bnx2x/bnx2x_main.c
index 51b7883..1e0ac8b 100644
--- a/drivers/net/bnx2x/bnx2x_main.c
+++ b/drivers/net/bnx2x/bnx2x_main.c
@@ -7878,7 +7878,7 @@ static int bnx2x_set_num_queues(struct bnx2x *bp)
 {
 	int rc = 0;
 
-	switch (int_mode) {
+	switch (bp->int_mode) {
 	case INT_MODE_INTx:
 	case INT_MODE_MSI:
 		bp->num_queues = 1;
@@ -9951,7 +9951,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 		multi_mode = ETH_RSS_MODE_DISABLED;
 	}
 	bp->multi_mode = multi_mode;
-
+	bp->int_mode = int_mode;
 
 	bp->dev->features |= NETIF_F_GRO;
 
@@ -9963,6 +9963,7 @@ static int __devinit bnx2x_init_bp(struct bnx2x *bp)
 		bp->flags |= TPA_ENABLE_FLAG;
 		bp->dev->features |= NETIF_F_LRO;
 	}
+	bp->disable_tpa = disable_tpa;
 
 	if (CHIP_IS_E1(bp))
 		bp->dropless_fc = 0;
@@ -11006,7 +11007,7 @@ static int bnx2x_set_flags(struct net_device *dev, u32 data)
 
 	/* TPA requires Rx CSUM offloading */
 	if ((data & ETH_FLAG_LRO) && bp->rx_csum) {
-		if (!disable_tpa) {
+		if (!bp->disable_tpa) {
 			if (!(dev->features & NETIF_F_LRO)) {
 				dev->features |= NETIF_F_LRO;
 				bp->flags |= TPA_ENABLE_FLAG;
-- 
1.7.1





^ permalink raw reply related	[flat|nested] only message in thread

only message in thread, other threads:[~2010-07-27 19:16 UTC | newest]

Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-07-27 19:05 [PATCH net-next 2/7] bnx2x: store module parameters in driver main structure Dmitry Kravkov

This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox