* [PATCH net-next 09/10] tg3: Enable phy APD for 5717 and later asic revs
@ 2010-11-24 18:31 Matt Carlson
0 siblings, 0 replies; only message in thread
From: Matt Carlson @ 2010-11-24 18:31 UTC (permalink / raw)
To: davem; +Cc: netdev, andy, mcarlson
This patch enables the gphy autopowerdown feature in the phy for all
new devices that support it.
Signed-off-by: Matt Carlson <mcarlson@broadcom.com>
Reviewed-by: Michael Chan <mchan@broadcom.com>
---
drivers/net/tg3.c | 5 +++--
1 files changed, 3 insertions(+), 2 deletions(-)
diff --git a/drivers/net/tg3.c b/drivers/net/tg3.c
index 3079e1f..afb79db 100644
--- a/drivers/net/tg3.c
+++ b/drivers/net/tg3.c
@@ -12431,8 +12431,9 @@ static void __devinit tg3_get_eeprom_hw_cfg(struct tg3 *tp)
if (cfg2 & (1 << 18))
tp->phy_flags |= TG3_PHYFLG_SERDES_PREEMPHASIS;
- if (((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
- GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX)) &&
+ if (((tp->tg3_flags3 & TG3_FLG3_5717_PLUS) ||
+ ((GET_ASIC_REV(tp->pci_chip_rev_id) == ASIC_REV_5784 &&
+ GET_CHIP_REV(tp->pci_chip_rev_id) != CHIPREV_5784_AX))) &&
(cfg2 & NIC_SRAM_DATA_CFG_2_APD_EN))
tp->phy_flags |= TG3_PHYFLG_ENABLE_APD;
--
1.7.2.2
^ permalink raw reply related [flat|nested] only message in thread
only message in thread, other threads:[~2010-11-24 18:32 UTC | newest]
Thread overview: (only message) (download: mbox.gz follow: Atom feed
-- links below jump to the message on this page --
2010-11-24 18:31 [PATCH net-next 09/10] tg3: Enable phy APD for 5717 and later asic revs Matt Carlson
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox