Re: LRO disable warnings on kernel 2.6.38

[Eric Dumazet <eric.dumazet@gmail.com>]

Le vendredi 18 mars 2011 à 12:12 +0100, Jesper Dangaard Brouer a écrit :
> Hi
> 
> I'm seeing the LRO disable warnings using kernel 2.6.38:
> 
> [    8.664759] NET: Registered protocol family 10
> [    8.838148] ADDRCONF(NETDEV_UP): eth71: link is not ready
> [    8.872639] ------------[ cut here ]------------
> [    8.872645] WARNING: at net/core/dev.c:1363 dev_disable_lro+0x7b/0x80()
> [    8.872647] Hardware name: ProLiant DL370 G6
> [    8.872648] Modules linked in: ipv6 nf_conntrack ip_tables loop i7core_edac edac_core ipmi_si ipmi_msghandler joydev hpilo pcspkr sg hpsa igb ata_piix netxen_nic dca [last unloaded: scsi_wait_scan]
> [    8.872660] Pid: 2221, comm: sysctl Not tainted 2.6.38-comx04 #2
> [    8.872662] Call Trace:
> [    8.872671]  [<ffffffff81056e1f>] ? warn_slowpath_common+0x7f/0xc0
> [    8.872675]  [<ffffffff81056e7a>] ? warn_slowpath_null+0x1a/0x20
> [    8.872680]  [<ffffffff8140c0ab>] ? dev_disable_lro+0x7b/0x80
> [    8.872686]  [<ffffffff81474f27>] ? devinet_sysctl_forward+0x147/0x180
> [    8.872691]  [<ffffffff811872f7>] ? proc_sys_call_handler+0x97/0xd0
> [    8.872700]  [<ffffffff81187344>] ? proc_sys_write+0x14/0x20
> [    8.872704]  [<ffffffff81124148>] ? vfs_write+0xc8/0x180
> [    8.872707]  [<ffffffff81124301>] ? sys_write+0x51/0x90
> [    8.872712]  [<ffffffff8100b8c2>] ? system_call_fastpath+0x16/0x1b
> [    8.872714] ---[ end trace 6245283cb8d484cc ]---
> 
> The strange part is that I didn't see this warning on my testlab and
> pre-prod servers.  The warning is from the first production server,
> which got kernel 2.6.38 deployed this morning.
> 
> The NIC driver is igb.
> 
> The only difference in hardware between the production and
> pre-production server (which didn't show the warning), is the
> prod-server have an extra dual-port original Intel NIC, dev-named
> "eth71".  And its just after the init of eth71, the warning occurs.
> 
> We usually use a 6 port NIC from Hotlava, which is based on the same
> chip 82576 and also uses the same igb driver.
> 
> Intel orig NIC eth71
>  albpd4:~# ethtool -i eth71
>  driver: igb
>  version: 2.1.0-k2
>  firmware-version: 1.2-1
>  bus-info: 0000:21:00.0
> 
> Hotlava Intel chip based NIC eth51:
>  albpd4:~# ethtool -i eth51
>  driver: igb
>  version: 2.1.0-k2
>  firmware-version: 1.2-1
>  bus-info: 0000:1d:00.1
> 
> I don't understand why I don't see the warning on my pre-prod server,
> which only have the Hotlava NIC?!?
> 

Hmm, WARN_ON() message is not very nice in this case I'm afraid, we dont
even know offender

diff --git a/net/core/dev.c b/net/core/dev.c
index 0b88eba..571ab70 100644
--- a/net/core/dev.c
+++ b/net/core/dev.c
@@ -1361,7 +1361,8 @@ void dev_disable_lro(struct net_device *dev)
 			dev->ethtool_ops->set_flags(dev, flags);
 		}
 	}
-	WARN_ON(dev->features & NETIF_F_LRO);
+	if (dev->features & NETIF_F_LRO)
+		netdev_err(dev, "Could not disable LRO\n");
 }
 EXPORT_SYMBOL(dev_disable_lro);