* [net-next 01/10] sis*: Move the Silicon Integrated Systems (SiS) drivers
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 02/10] cirrus: Move the Cirrus network driver Jeff Kirsher
` (9 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Daniele Venzano,
Francois Romieu
Move the SiS drivers into drivers/net/ethernet/sis/ and make the
necessary Kconfig and Makefile changes
CC: Daniele Venzano <venza@brownhat.org>
CC: Francois Romieu <romieu@fr.zoreil.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 4 +-
drivers/net/Kconfig | 30 ------------------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/sis/Kconfig | 50 +++++++++++++++++++++++++++++++
drivers/net/ethernet/sis/Makefile | 6 ++++
drivers/net/{ => ethernet/sis}/sis190.c | 0
drivers/net/{ => ethernet/sis}/sis900.c | 0
drivers/net/{ => ethernet/sis}/sis900.h | 0
10 files changed, 60 insertions(+), 34 deletions(-)
create mode 100644 drivers/net/ethernet/sis/Kconfig
create mode 100644 drivers/net/ethernet/sis/Makefile
rename drivers/net/{ => ethernet/sis}/sis190.c (100%)
rename drivers/net/{ => ethernet/sis}/sis900.c (100%)
rename drivers/net/{ => ethernet/sis}/sis900.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 84948bd..96a2d47 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -5820,14 +5820,14 @@ SIS 190 ETHERNET DRIVER
M: Francois Romieu <romieu@fr.zoreil.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/sis190.c
+F: drivers/net/ethernet/sis/sis190.c
SIS 900/7016 FAST ETHERNET DRIVER
M: Daniele Venzano <venza@brownhat.org>
W: http://www.brownhat.org/sis900.html
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/sis900.*
+F: drivers/net/ethernet/sis/sis900.*
SIS 96X I2C/SMBUS DRIVER
M: "Mark M. Hoffman" <mhoffman@lightlink.com>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 1e1df3d..33df254 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -500,22 +500,6 @@ config R6040
To compile this driver as a module, choose M here: the module
will be called r6040. This is recommended.
-config SIS900
- tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
- depends on NET_PCI && PCI
- select CRC32
- select MII
- ---help---
- This is a driver for the Fast Ethernet PCI network cards based on
- the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
- SiS 630 and SiS 540 chipsets.
-
- This driver also supports AMD 79C901 HomePNA so that you can use
- your phone line as a network cable.
-
- To compile this driver as a module, choose M here: the module
- will be called sis900. This is recommended.
-
config TLAN
tristate "TI ThunderLAN support"
depends on NET_PCI && (PCI || EISA)
@@ -639,20 +623,6 @@ config YELLOWFIN
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.
-config SIS190
- tristate "SiS190/SiS191 gigabit ethernet support"
- depends on PCI
- select CRC32
- select MII
- ---help---
- Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
- a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
- appear in lan on motherboard designs which are based on SiS 965
- and SiS 966 south bridge.
-
- To compile this driver as a module, choose M here: the module
- will be called sis190. This is recommended.
-
config TSI108_ETH
tristate "Tundra TSI108 gigabit Ethernet support"
depends on TSI108_BRIDGE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 275ed4a..3b14f1a 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -24,8 +24,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_TLAN) += tlan.o
-obj-$(CONFIG_SIS190) += sis190.o
-obj-$(CONFIG_SIS900) += sis900.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 9754247..b15b1e2 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -42,6 +42,7 @@ source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
source "drivers/net/ethernet/seeq/Kconfig"
+source "drivers/net/ethernet/sis/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
source "drivers/net/ethernet/sgi/Kconfig"
source "drivers/net/ethernet/smsc/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 7e7a319..1f45ec9 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -33,6 +33,7 @@ obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
+obj-$(CONFIG_NET_VENDOR_SIS) += sis/
obj-$(CONFIG_SFC) += sfc/
obj-$(CONFIG_NET_VENDOR_SGI) += sgi/
obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
diff --git a/drivers/net/ethernet/sis/Kconfig b/drivers/net/ethernet/sis/Kconfig
new file mode 100644
index 0000000..01d43e8
--- /dev/null
+++ b/drivers/net/ethernet/sis/Kconfig
@@ -0,0 +1,50 @@
+#
+# Silicon Integrated Systems (SiS) device configuration
+#
+
+config NET_VENDOR_SIS
+ bool "Silicon Integrated Systems (SiS) devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about SiS devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_SIS
+
+config SIS900
+ tristate "SiS 900/7016 PCI Fast Ethernet Adapter support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This is a driver for the Fast Ethernet PCI network cards based on
+ the SiS 900 and SiS 7016 chips. The SiS 900 core is also embedded in
+ SiS 630 and SiS 540 chipsets.
+
+ This driver also supports AMD 79C901 HomePNA so that you can use
+ your phone line as a network cable.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sis900. This is recommended.
+
+config SIS190
+ tristate "SiS190/SiS191 gigabit ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ Say Y here if you have a SiS 190 PCI Fast Ethernet adapter or
+ a SiS 191 PCI Gigabit Ethernet adapter. Both are expected to
+ appear in lan on motherboard designs which are based on SiS 965
+ and SiS 966 south bridge.
+
+ To compile this driver as a module, choose M here: the module
+ will be called sis190. This is recommended.
+
+endif # NET_VENDOR_SIS
diff --git a/drivers/net/ethernet/sis/Makefile b/drivers/net/ethernet/sis/Makefile
new file mode 100644
index 0000000..58d3ac1
--- /dev/null
+++ b/drivers/net/ethernet/sis/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for Silicon Integrated Systems (SiS) network device drivers.
+#
+
+obj-$(CONFIG_SIS190) += sis190.o
+obj-$(CONFIG_SIS900) += sis900.o
diff --git a/drivers/net/sis190.c b/drivers/net/ethernet/sis/sis190.c
similarity index 100%
rename from drivers/net/sis190.c
rename to drivers/net/ethernet/sis/sis190.c
diff --git a/drivers/net/sis900.c b/drivers/net/ethernet/sis/sis900.c
similarity index 100%
rename from drivers/net/sis900.c
rename to drivers/net/ethernet/sis/sis900.c
diff --git a/drivers/net/sis900.h b/drivers/net/ethernet/sis/sis900.h
similarity index 100%
rename from drivers/net/sis900.h
rename to drivers/net/ethernet/sis/sis900.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 02/10] cirrus: Move the Cirrus network driver
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
2011-08-12 10:52 ` [net-next 01/10] sis*: Move the Silicon Integrated Systems (SiS) drivers Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 17:29 ` H Hartley Sweeten
2011-08-12 10:52 ` [net-next 03/10] nuvoton: Move the Nuvoton driver Jeff Kirsher
` (8 subsequent siblings)
10 siblings, 1 reply; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Hartley Sweeten
Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/
and make the necessary Kconfig and Makefile changes
CC: Hartley Sweeten <hsweeten@visionengravers.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/arm/Kconfig | 8 ------
drivers/net/arm/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/cirrus/Kconfig | 28 +++++++++++++++++++++
drivers/net/ethernet/cirrus/Makefile | 5 +++
drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c | 0
8 files changed, 36 insertions(+), 10 deletions(-)
create mode 100644 drivers/net/ethernet/cirrus/Kconfig
create mode 100644 drivers/net/ethernet/cirrus/Makefile
rename drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 96a2d47..ee4ebb4 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1768,7 +1768,7 @@ CIRRUS LOGIC EP93XX ETHERNET DRIVER
M: Hartley Sweeten <hsweeten@visionengravers.com>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/arm/ep93xx_eth.c
+F: drivers/net/ethernet/cirrus/ep93xx_eth.c
CIRRUS LOGIC EP93XX OHCI USB HOST DRIVER
M: Lennert Buytenhek <kernel@wantstofly.org>
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index 4f748cc..fc94b4b 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -11,14 +11,6 @@ config ARM_AT91_ETHER
If you wish to compile a kernel for the AT91RM9200 and enable
ethernet support, then you should always answer Y to this.
-config EP93XX_ETH
- tristate "EP93xx Ethernet support"
- depends on ARM && ARCH_EP93XX
- select MII
- help
- This is a driver for the ethernet hardware included in EP93xx CPUs.
- Say Y if you are building a kernel for EP93xx based devices.
-
config W90P910_ETH
tristate "Nuvoton w90p910 Ethernet support"
depends on ARM && ARCH_W90X900
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 316b06c..462b3a4 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,5 +4,4 @@
#
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
-obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index b15b1e2..ff07408 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -18,6 +18,7 @@ source "drivers/net/ethernet/atheros/Kconfig"
source "drivers/net/ethernet/broadcom/Kconfig"
source "drivers/net/ethernet/brocade/Kconfig"
source "drivers/net/ethernet/chelsio/Kconfig"
+source "drivers/net/ethernet/cirrus/Kconfig"
source "drivers/net/ethernet/cisco/Kconfig"
source "drivers/net/ethernet/dec/Kconfig"
source "drivers/net/ethernet/dlink/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 1f45ec9..3a17413 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -10,6 +10,7 @@ obj-$(CONFIG_NET_VENDOR_ATHEROS) += atheros/
obj-$(CONFIG_NET_VENDOR_BROADCOM) += broadcom/
obj-$(CONFIG_NET_VENDOR_BROCADE) += brocade/
obj-$(CONFIG_NET_VENDOR_CHELSIO) += chelsio/
+obj-$(CONFIG_NET_VENDOR_CIRRUS) += cirrus/
obj-$(CONFIG_NET_VENDOR_CISCO) += cisco/
obj-$(CONFIG_NET_VENDOR_DEC) += dec/
obj-$(CONFIG_NET_VENDOR_DLINK) += dlink/
diff --git a/drivers/net/ethernet/cirrus/Kconfig b/drivers/net/ethernet/cirrus/Kconfig
new file mode 100644
index 0000000..53ebe78
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Kconfig
@@ -0,0 +1,28 @@
+#
+# Cirrus network device configuration
+#
+
+config NET_VENDOR_CIRRUS
+ bool "Cirrus devices"
+ depends on ARM && ARCH_EP93XX
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Cirrus cards. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_CIRRUS
+
+config EP93XX_ETH
+ tristate "EP93xx Ethernet support"
+ depends on ARM && ARCH_EP93XX
+ select MII
+ help
+ This is a driver for the ethernet hardware included in EP93xx CPUs.
+ Say Y if you are building a kernel for EP93xx based devices.
+
+endif # NET_VENDOR_CIRRUS
diff --git a/drivers/net/ethernet/cirrus/Makefile b/drivers/net/ethernet/cirrus/Makefile
new file mode 100644
index 0000000..9905ea2
--- /dev/null
+++ b/drivers/net/ethernet/cirrus/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Cirrus network device drivers.
+#
+
+obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
diff --git a/drivers/net/arm/ep93xx_eth.c b/drivers/net/ethernet/cirrus/ep93xx_eth.c
similarity index 100%
rename from drivers/net/arm/ep93xx_eth.c
rename to drivers/net/ethernet/cirrus/ep93xx_eth.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* RE: [net-next 02/10] cirrus: Move the Cirrus network driver
2011-08-12 10:52 ` [net-next 02/10] cirrus: Move the Cirrus network driver Jeff Kirsher
@ 2011-08-12 17:29 ` H Hartley Sweeten
0 siblings, 0 replies; 13+ messages in thread
From: H Hartley Sweeten @ 2011-08-12 17:29 UTC (permalink / raw)
To: Jeff Kirsher, davem@davemloft.net
Cc: netdev@vger.kernel.org, gospo@redhat.com, sassmann@redhat.com
On Friday, August 12, 2011 3:53 AM, Jeff Kirsher wrote:
>
> Move the Cirrus Ethernet driver into drivers/net/ethernet/cirrus/
> and make the necessary Kconfig and Makefile changes
>
> CC: Hartley Sweeten <hsweeten@visionengravers.com>
> Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
> ---
> MAINTAINERS | 2 +-
> drivers/net/arm/Kconfig | 8 ------
> drivers/net/arm/Makefile | 1 -
> drivers/net/ethernet/Kconfig | 1 +
> drivers/net/ethernet/Makefile | 1 +
> drivers/net/ethernet/cirrus/Kconfig | 28 +++++++++++++++++++++
> drivers/net/ethernet/cirrus/Makefile | 5 +++
> drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c | 0
> 8 files changed, 36 insertions(+), 10 deletions(-)
> create mode 100644 drivers/net/ethernet/cirrus/Kconfig
> create mode 100644 drivers/net/ethernet/cirrus/Makefile
> rename drivers/net/{arm => ethernet/cirrus}/ep93xx_eth.c (100%)
Acked-by: H Hartley Sweeten <hsweeten@visionengravers.com>
Will the Kconfig change require an update to ep93xx_defconfig in order to
have CONFIG_EP93XX_ETH selected?
Currently it has these relevant selections:
CONFIG_NET=y
CONFIG_NETDEVICES=y
CONFIG_NET_ETHERNET=y
CONFIG_EP93XX_ETH=y
Will CONFIG_NET_VENDOR_CIRRUS need to be added or will kconfig figure out
the dependency automatically?
Regards,
Hartley
^ permalink raw reply [flat|nested] 13+ messages in thread
* [net-next 03/10] nuvoton: Move the Nuvoton driver
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
2011-08-12 10:52 ` [net-next 01/10] sis*: Move the Silicon Integrated Systems (SiS) drivers Jeff Kirsher
2011-08-12 10:52 ` [net-next 02/10] cirrus: Move the Cirrus network driver Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 04/10] tsi108*: Move the Tundra driver Jeff Kirsher
` (7 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Wan ZongShun
Move the Nuvoton driver into drivers/net/ethernet/nuvoton/ and
make the necessary Kconfig and Makefile changes.
CC: Wan ZongShun <mcuos.com@gmail.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/arm/Kconfig | 9 ------
drivers/net/arm/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/nuvoton/Kconfig | 29 ++++++++++++++++++++
drivers/net/ethernet/nuvoton/Makefile | 5 +++
.../net/{arm => ethernet/nuvoton}/w90p910_ether.c | 0
8 files changed, 37 insertions(+), 11 deletions(-)
create mode 100644 drivers/net/ethernet/nuvoton/Kconfig
create mode 100644 drivers/net/ethernet/nuvoton/Makefile
rename drivers/net/{arm => ethernet/nuvoton}/w90p910_ether.c (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index ee4ebb4..d31fd9e 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1127,7 +1127,7 @@ F: arch/arm/mach-nuc93x/
F: drivers/input/keyboard/w90p910_keypad.c
F: drivers/input/touchscreen/w90p910_ts.c
F: drivers/watchdog/nuc900_wdt.c
-F: drivers/net/arm/w90p910_ether.c
+F: drivers/net/ethernet/nuvoton/w90p910_ether.c
F: drivers/mtd/nand/nuc900_nand.c
F: drivers/rtc/rtc-nuc900.c
F: drivers/spi/spi_nuc900.c
diff --git a/drivers/net/arm/Kconfig b/drivers/net/arm/Kconfig
index fc94b4b..57d16b9 100644
--- a/drivers/net/arm/Kconfig
+++ b/drivers/net/arm/Kconfig
@@ -10,12 +10,3 @@ config ARM_AT91_ETHER
help
If you wish to compile a kernel for the AT91RM9200 and enable
ethernet support, then you should always answer Y to this.
-
-config W90P910_ETH
- tristate "Nuvoton w90p910 Ethernet support"
- depends on ARM && ARCH_W90X900
- select PHYLIB
- select MII
- help
- Say Y here if you want to use built-in Ethernet ports
- on w90p910 processor.
diff --git a/drivers/net/arm/Makefile b/drivers/net/arm/Makefile
index 462b3a4..fc0f85c 100644
--- a/drivers/net/arm/Makefile
+++ b/drivers/net/arm/Makefile
@@ -4,4 +4,3 @@
#
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
-obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index ff07408..3893065 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -37,6 +37,7 @@ source "drivers/net/ethernet/micrel/Kconfig"
source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
+source "drivers/net/ethernet/nuvoton/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 3a17413..e1f0b94 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -28,6 +28,7 @@ obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
+obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
diff --git a/drivers/net/ethernet/nuvoton/Kconfig b/drivers/net/ethernet/nuvoton/Kconfig
new file mode 100644
index 0000000..3b91c3b
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/Kconfig
@@ -0,0 +1,29 @@
+#
+# Nuvoton network device configuration
+#
+
+config NET_VENDOR_NUVOTON
+ bool "Nuvoton devices"
+ depends on ARM && ARCH_W90X900
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Nuvoton cards. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_NUVOTON
+
+config W90P910_ETH
+ tristate "Nuvoton w90p910 Ethernet support"
+ depends on ARM && ARCH_W90X900
+ select PHYLIB
+ select MII
+ ---help---
+ Say Y here if you want to use built-in Ethernet ports
+ on w90p910 processor.
+
+endif # NET_VENDOR_NUVOTON
diff --git a/drivers/net/ethernet/nuvoton/Makefile b/drivers/net/ethernet/nuvoton/Makefile
new file mode 100644
index 0000000..171aa04
--- /dev/null
+++ b/drivers/net/ethernet/nuvoton/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Nuvoton network device drivers.
+#
+
+obj-$(CONFIG_W90P910_ETH) += w90p910_ether.o
diff --git a/drivers/net/arm/w90p910_ether.c b/drivers/net/ethernet/nuvoton/w90p910_ether.c
similarity index 100%
rename from drivers/net/arm/w90p910_ether.c
rename to drivers/net/ethernet/nuvoton/w90p910_ether.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 04/10] tsi108*: Move the Tundra driver
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (2 preceding siblings ...)
2011-08-12 10:52 ` [net-next 03/10] nuvoton: Move the Nuvoton driver Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 05/10] s6gmac: Move the s6gmac drivers Jeff Kirsher
` (6 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Kong Lai
Move the Tundra driver to drivers/net/ethernet/tundra/ and
make the necessary Kocnfig and Makefile changes.
CC: Kong Lai <kong.lai@tundra.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/Kconfig | 8 ------
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/tundra/Kconfig | 28 ++++++++++++++++++++++++
drivers/net/ethernet/tundra/Makefile | 5 ++++
drivers/net/{ => ethernet/tundra}/tsi108_eth.c | 0
drivers/net/{ => ethernet/tundra}/tsi108_eth.h | 0
8 files changed, 35 insertions(+), 9 deletions(-)
create mode 100644 drivers/net/ethernet/tundra/Kconfig
create mode 100644 drivers/net/ethernet/tundra/Makefile
rename drivers/net/{ => ethernet/tundra}/tsi108_eth.c (100%)
rename drivers/net/{ => ethernet/tundra}/tsi108_eth.h (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 33df254..a96cf18 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -623,14 +623,6 @@ config YELLOWFIN
To compile this driver as a module, choose M here: the module
will be called yellowfin. This is recommended.
-config TSI108_ETH
- tristate "Tundra TSI108 gigabit Ethernet support"
- depends on TSI108_BRIDGE
- help
- This driver supports Tundra TSI108 gigabit Ethernet ports.
- To compile this driver as a module, choose M here: the module
- will be called tsi108_eth.
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 3b14f1a..d7ac2f8 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -42,7 +42,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3893065..8f404ea 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -52,6 +52,7 @@ source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
+source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index e1f0b94..6cf7f99 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -43,4 +43,5 @@ obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
+obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
diff --git a/drivers/net/ethernet/tundra/Kconfig b/drivers/net/ethernet/tundra/Kconfig
new file mode 100644
index 0000000..03925d1
--- /dev/null
+++ b/drivers/net/ethernet/tundra/Kconfig
@@ -0,0 +1,28 @@
+#
+# Tundra network device configuration
+#
+
+config NET_VENDOR_TUNDRA
+ bool "Tundra devices"
+ depends on TSI108_BRIDGE
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Tundra cards. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_TUNDRA
+
+config TSI108_ETH
+ tristate "Tundra TSI108 gigabit Ethernet support"
+ depends on TSI108_BRIDGE
+ ---help---
+ This driver supports Tundra TSI108 gigabit Ethernet ports.
+ To compile this driver as a module, choose M here: the module
+ will be called tsi108_eth.
+
+endif # NET_VENDOR_TUNDRA
diff --git a/drivers/net/ethernet/tundra/Makefile b/drivers/net/ethernet/tundra/Makefile
new file mode 100644
index 0000000..439f693
--- /dev/null
+++ b/drivers/net/ethernet/tundra/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Tundra network device drivers.
+#
+
+obj-$(CONFIG_TSI108_ETH) += tsi108_eth.o
diff --git a/drivers/net/tsi108_eth.c b/drivers/net/ethernet/tundra/tsi108_eth.c
similarity index 100%
rename from drivers/net/tsi108_eth.c
rename to drivers/net/ethernet/tundra/tsi108_eth.c
diff --git a/drivers/net/tsi108_eth.h b/drivers/net/ethernet/tundra/tsi108_eth.h
similarity index 100%
rename from drivers/net/tsi108_eth.h
rename to drivers/net/ethernet/tundra/tsi108_eth.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 05/10] s6gmac: Move the s6gmac drivers
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (3 preceding siblings ...)
2011-08-12 10:52 ` [net-next 04/10] tsi108*: Move the Tundra driver Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 06/10] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers Jeff Kirsher
` (5 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Oskar Schirmer
Move the s6gmac driver to drivers/net/ethernet/ and
make the necessary Kconfig and Makefile changes.
CC: Oskar Schirmer <os@emlix.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/Kconfig | 11 -----------
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 12 ++++++++++++
drivers/net/ethernet/Makefile | 1 +
drivers/net/{ => ethernet}/s6gmac.c | 0
5 files changed, 13 insertions(+), 12 deletions(-)
rename drivers/net/{ => ethernet}/s6gmac.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index a96cf18..134c3a4 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -643,17 +643,6 @@ config JME
To compile this driver as a module, choose M here. The module
will be called jme.
-config S6GMAC
- tristate "S6105 GMAC ethernet support"
- depends on XTENSA_VARIANT_S6000
- select PHYLIB
- help
- This driver supports the on chip ethernet device on the
- S6105 xtensa processor.
-
- To compile this driver as a module, choose M here. The module
- will be called s6gmac.
-
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d7ac2f8..938484f 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -83,7 +83,6 @@ obj-$(CONFIG_LANTIQ_ETOP) += lantiq_etop.o
obj-$(CONFIG_DNET) += dnet.o
obj-$(CONFIG_MACB) += macb.o
-obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_ARM) += arm/
obj-$(CONFIG_DEV_APPLETALK) += appletalk/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 8f404ea..f53a4bc 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -43,6 +43,18 @@ source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
source "drivers/net/ethernet/realtek/Kconfig"
+
+config S6GMAC
+ tristate "S6105 GMAC ethernet support"
+ depends on XTENSA_VARIANT_S6000
+ select PHYLIB
+ ---help---
+ This driver supports the on chip ethernet device on the
+ S6105 xtensa processor.
+
+ To compile this driver as a module, choose M here. The module
+ will be called s6gmac.
+
source "drivers/net/ethernet/seeq/Kconfig"
source "drivers/net/ethernet/sis/Kconfig"
source "drivers/net/ethernet/sfc/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 6cf7f99..4491d84 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -34,6 +34,7 @@ obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
obj-$(CONFIG_NET_VENDOR_REALTEK) += realtek/
+obj-$(CONFIG_S6GMAC) += s6gmac.o
obj-$(CONFIG_NET_VENDOR_SEEQ) += seeq/
obj-$(CONFIG_NET_VENDOR_SIS) += sis/
obj-$(CONFIG_SFC) += sfc/
diff --git a/drivers/net/s6gmac.c b/drivers/net/ethernet/s6gmac.c
similarity index 100%
rename from drivers/net/s6gmac.c
rename to drivers/net/ethernet/s6gmac.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 06/10] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (4 preceding siblings ...)
2011-08-12 10:52 ` [net-next 05/10] s6gmac: Move the s6gmac drivers Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 07/10] hamachi/yellowfin: Move the packet engine drivers Jeff Kirsher
` (4 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, Sriram, Vinay Hegde,
Cyril Chemparathy, Samuel Chessman, torben.mathiasen,
Eugene Konev, Florian Fainelli
Move the Texas Instruments drivers to drivers/net/ethernet/ti/ and
make the necessary Kconfig and Makefile changes.
CC: Sriram <srk@ti.com>
CC: Vinay Hegde <vinay.hegde@ti.com>
CC: Cyril Chemparathy <cyril@ti.com>
CC: Samuel Chessman <chessman@tux.org>
CC: <torben.mathiasen@compaq.com>
CC: Eugene Konev <ejka@imfi.kspu.ru>
CC: Florian Fainelli <florian@openwrt.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 4 +-
drivers/net/Kconfig | 56 ------------------
drivers/net/Makefile | 7 --
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/ti/Kconfig | 76 +++++++++++++++++++++++++
drivers/net/ethernet/ti/Makefile | 9 +++
drivers/net/{ => ethernet/ti}/cpmac.c | 0
drivers/net/{ => ethernet/ti}/davinci_cpdma.c | 0
drivers/net/{ => ethernet/ti}/davinci_cpdma.h | 0
drivers/net/{ => ethernet/ti}/davinci_emac.c | 0
drivers/net/{ => ethernet/ti}/davinci_mdio.c | 0
drivers/net/{ => ethernet/ti}/tlan.c | 0
drivers/net/{ => ethernet/ti}/tlan.h | 0
14 files changed, 89 insertions(+), 65 deletions(-)
create mode 100644 drivers/net/ethernet/ti/Kconfig
create mode 100644 drivers/net/ethernet/ti/Makefile
rename drivers/net/{ => ethernet/ti}/cpmac.c (100%)
rename drivers/net/{ => ethernet/ti}/davinci_cpdma.c (100%)
rename drivers/net/{ => ethernet/ti}/davinci_cpdma.h (100%)
rename drivers/net/{ => ethernet/ti}/davinci_emac.c (100%)
rename drivers/net/{ => ethernet/ti}/davinci_mdio.c (100%)
rename drivers/net/{ => ethernet/ti}/tlan.c (100%)
rename drivers/net/{ => ethernet/ti}/tlan.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index d31fd9e..622f4fc 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -1908,7 +1908,7 @@ CPMAC ETHERNET DRIVER
M: Florian Fainelli <florian@openwrt.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/cpmac.c
+F: drivers/net/ethernet/ti/cpmac.c
CPU FREQUENCY DRIVERS
M: Dave Jones <davej@redhat.com>
@@ -6420,7 +6420,7 @@ L: tlan-devel@lists.sourceforge.net (subscribers-only)
W: http://sourceforge.net/projects/tlan/
S: Maintained
F: Documentation/networking/tlan.txt
-F: drivers/net/tlan.*
+F: drivers/net/ethernet/ti/tlan.*
TOMOYO SECURITY MODULE
M: Kentaro Takeda <takedakn@nttdata.co.jp>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 134c3a4..e8d65fe 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -323,37 +323,6 @@ config NET_NETX
To compile this driver as a module, choose M here. The module
will be called netx-eth.
-config TI_DAVINCI_EMAC
- tristate "TI DaVinci EMAC Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- select TI_DAVINCI_MDIO
- select TI_DAVINCI_CPDMA
- select PHYLIB
- help
- This driver supports TI's DaVinci Ethernet .
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_emac_driver. This is recommended.
-
-config TI_DAVINCI_MDIO
- tristate "TI DaVinci MDIO Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- select PHYLIB
- help
- This driver supports TI's DaVinci MDIO module.
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_mdio. This is recommended.
-
-config TI_DAVINCI_CPDMA
- tristate "TI DaVinci CPDMA Support"
- depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
- help
- This driver supports TI's DaVinci CPDMA dma engine.
-
- To compile this driver as a module, choose M here: the module
- will be called davinci_cpdma. This is recommended.
-
config DM9000
tristate "DM9000 support"
depends on ARM || BLACKFIN || MIPS
@@ -500,31 +469,6 @@ config R6040
To compile this driver as a module, choose M here: the module
will be called r6040. This is recommended.
-config TLAN
- tristate "TI ThunderLAN support"
- depends on NET_PCI && (PCI || EISA)
- ---help---
- If you have a PCI Ethernet network card based on the ThunderLAN chip
- which is supported by this driver, say Y and read the
- Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- Devices currently supported by this driver are Compaq Netelligent,
- Compaq NetFlex and Olicom cards. Please read the file
- <file:Documentation/networking/tlan.txt> for more details.
-
- To compile this driver as a module, choose M here. The module
- will be called tlan.
-
- Please email feedback to <torben.mathiasen@compaq.com>.
-
-config CPMAC
- tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
- depends on NET_ETHERNET && EXPERIMENTAL && AR7
- select PHYLIB
- help
- TI AR7 CPMAC Ethernet support
-
config NET_POCKET
bool "Pocket and portable adapters"
depends on PARPORT
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 938484f..96112dd 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -5,11 +5,6 @@
obj-$(CONFIG_MII) += mii.o
obj-$(CONFIG_MDIO) += mdio.o
obj-$(CONFIG_PHYLIB) += phy/
-
-obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
-obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
-obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
-
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
@@ -23,7 +18,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
-obj-$(CONFIG_TLAN) += tlan.o
obj-$(CONFIG_R6040) += r6040.o
obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
@@ -67,7 +61,6 @@ obj-$(CONFIG_IFB) += ifb.o
obj-$(CONFIG_MACVLAN) += macvlan.o
obj-$(CONFIG_MACVTAP) += macvtap.o
obj-$(CONFIG_DEFXX) += defxx.o
-obj-$(CONFIG_CPMAC) += cpmac.o
obj-$(CONFIG_EQUALIZER) += eql.o
obj-$(CONFIG_KORINA) += korina.o
obj-$(CONFIG_MIPS_SIM_NET) += mipsnet.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index f53a4bc..3983e70 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -63,6 +63,7 @@ source "drivers/net/ethernet/smsc/Kconfig"
source "drivers/net/ethernet/stmicro/Kconfig"
source "drivers/net/ethernet/sun/Kconfig"
source "drivers/net/ethernet/tehuti/Kconfig"
+source "drivers/net/ethernet/ti/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 4491d84..873d275 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -43,6 +43,7 @@ obj-$(CONFIG_NET_VENDOR_SMSC) += smsc/
obj-$(CONFIG_NET_VENDOR_STMICRO) += stmicro/
obj-$(CONFIG_NET_VENDOR_SUN) += sun/
obj-$(CONFIG_NET_VENDOR_TEHUTI) += tehuti/
+obj-$(CONFIG_NET_VENDOR_TI) += ti/
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
diff --git a/drivers/net/ethernet/ti/Kconfig b/drivers/net/ethernet/ti/Kconfig
new file mode 100644
index 0000000..1284319
--- /dev/null
+++ b/drivers/net/ethernet/ti/Kconfig
@@ -0,0 +1,76 @@
+#
+# TI device configuration
+#
+
+config NET_VENDOR_TI
+ bool "Texas Instruments (TI) devices"
+ depends on PCI || EISA || AR7 || (ARM && (ARCH_DAVINCI || ARCH_OMAP3))
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about TI devices. If you say Y, you will be asked for
+ your specific card in the following questions.
+
+if NET_VENDOR_TI
+
+config TI_DAVINCI_EMAC
+ tristate "TI DaVinci EMAC Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select TI_DAVINCI_MDIO
+ select TI_DAVINCI_CPDMA
+ select PHYLIB
+ ---help---
+ This driver supports TI's DaVinci Ethernet .
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_emac_driver. This is recommended.
+
+config TI_DAVINCI_MDIO
+ tristate "TI DaVinci MDIO Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ select PHYLIB
+ ---help---
+ This driver supports TI's DaVinci MDIO module.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_mdio. This is recommended.
+
+config TI_DAVINCI_CPDMA
+ tristate "TI DaVinci CPDMA Support"
+ depends on ARM && ( ARCH_DAVINCI || ARCH_OMAP3 )
+ ---help---
+ This driver supports TI's DaVinci CPDMA dma engine.
+
+ To compile this driver as a module, choose M here: the module
+ will be called davinci_cpdma. This is recommended.
+
+config TLAN
+ tristate "TI ThunderLAN support"
+ depends on (PCI || EISA)
+ ---help---
+ If you have a PCI Ethernet network card based on the ThunderLAN chip
+ which is supported by this driver, say Y and read the
+ Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Devices currently supported by this driver are Compaq Netelligent,
+ Compaq NetFlex and Olicom cards. Please read the file
+ <file:Documentation/networking/tlan.txt> for more details.
+
+ To compile this driver as a module, choose M here. The module
+ will be called tlan.
+
+ Please email feedback to <torben.mathiasen@compaq.com>.
+
+config CPMAC
+ tristate "TI AR7 CPMAC Ethernet support (EXPERIMENTAL)"
+ depends on EXPERIMENTAL && AR7
+ select PHYLIB
+ ---help---
+ TI AR7 CPMAC Ethernet support
+
+endif # NET_VENDOR_TI
diff --git a/drivers/net/ethernet/ti/Makefile b/drivers/net/ethernet/ti/Makefile
new file mode 100644
index 0000000..aedb3af
--- /dev/null
+++ b/drivers/net/ethernet/ti/Makefile
@@ -0,0 +1,9 @@
+#
+# Makefile for the TI network device drivers.
+#
+
+obj-$(CONFIG_TLAN) += tlan.o
+obj-$(CONFIG_CPMAC) += cpmac.o
+obj-$(CONFIG_TI_DAVINCI_EMAC) += davinci_emac.o
+obj-$(CONFIG_TI_DAVINCI_MDIO) += davinci_mdio.o
+obj-$(CONFIG_TI_DAVINCI_CPDMA) += davinci_cpdma.o
diff --git a/drivers/net/cpmac.c b/drivers/net/ethernet/ti/cpmac.c
similarity index 100%
rename from drivers/net/cpmac.c
rename to drivers/net/ethernet/ti/cpmac.c
diff --git a/drivers/net/davinci_cpdma.c b/drivers/net/ethernet/ti/davinci_cpdma.c
similarity index 100%
rename from drivers/net/davinci_cpdma.c
rename to drivers/net/ethernet/ti/davinci_cpdma.c
diff --git a/drivers/net/davinci_cpdma.h b/drivers/net/ethernet/ti/davinci_cpdma.h
similarity index 100%
rename from drivers/net/davinci_cpdma.h
rename to drivers/net/ethernet/ti/davinci_cpdma.h
diff --git a/drivers/net/davinci_emac.c b/drivers/net/ethernet/ti/davinci_emac.c
similarity index 100%
rename from drivers/net/davinci_emac.c
rename to drivers/net/ethernet/ti/davinci_emac.c
diff --git a/drivers/net/davinci_mdio.c b/drivers/net/ethernet/ti/davinci_mdio.c
similarity index 100%
rename from drivers/net/davinci_mdio.c
rename to drivers/net/ethernet/ti/davinci_mdio.c
diff --git a/drivers/net/tlan.c b/drivers/net/ethernet/ti/tlan.c
similarity index 100%
rename from drivers/net/tlan.c
rename to drivers/net/ethernet/ti/tlan.c
diff --git a/drivers/net/tlan.h b/drivers/net/ethernet/ti/tlan.h
similarity index 100%
rename from drivers/net/tlan.h
rename to drivers/net/ethernet/ti/tlan.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 07/10] hamachi/yellowfin: Move the packet engine drivers
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (5 preceding siblings ...)
2011-08-12 10:52 ` [net-next 06/10] davinci*/tlan/cpmac: Move the Texas Instruments (TI) drivers Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 08/10] octeon: Move the Cavium driver Jeff Kirsher
` (3 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Donald Becker
Move the packet engine drivers to drivers/net/ethernet/packetengines/
and the necessary Kconfig and Makefile changes.
CC: Donald Becker <becker@scyld.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/Kconfig | 26 -----------
drivers/net/Makefile | 2 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/packetengines/Kconfig | 46 ++++++++++++++++++++
drivers/net/ethernet/packetengines/Makefile | 6 +++
drivers/net/{ => ethernet/packetengines}/hamachi.c | 0
.../net/{ => ethernet/packetengines}/yellowfin.c | 0
8 files changed, 54 insertions(+), 28 deletions(-)
create mode 100644 drivers/net/ethernet/packetengines/Kconfig
create mode 100644 drivers/net/ethernet/packetengines/Makefile
rename drivers/net/{ => ethernet/packetengines}/hamachi.c (100%)
rename drivers/net/{ => ethernet/packetengines}/yellowfin.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index e8d65fe..99b209e 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -541,32 +541,6 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-config HAMACHI
- tristate "Packet Engines Hamachi GNIC-II support"
- depends on PCI
- select MII
- help
- If you have a Gigabit Ethernet card of this type, say Y and read
- the Ethernet-HOWTO, available from
- <http://www.tldp.org/docs.html#howto>.
-
- To compile this driver as a module, choose M here. The module will be
- called hamachi.
-
-config YELLOWFIN
- tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
- depends on PCI && EXPERIMENTAL
- select CRC32
- ---help---
- Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
- adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
- used by the Beowulf Linux cluster project. See
- <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
- information about this driver in particular and Beowulf in general.
-
- To compile this driver as a module, choose M here: the module
- will be called yellowfin. This is recommended.
-
config XILINX_LL_TEMAC
tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
depends on PPC || MICROBLAZE
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 96112dd..d8c286e 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -19,7 +19,6 @@ obj-$(CONFIG_PLIP) += plip.o
obj-$(CONFIG_ROADRUNNER) += rrunner.o
obj-$(CONFIG_R6040) += r6040.o
-obj-$(CONFIG_YELLOWFIN) += yellowfin.o
obj-$(CONFIG_FEALNX) += fealnx.o
obj-$(CONFIG_SKFP) += skfp/
obj-$(CONFIG_ADAPTEC_STARFIRE) += starfire.o
@@ -30,7 +29,6 @@ obj-$(CONFIG_SH_ETH) += sh_eth.o
# end link order section
#
-obj-$(CONFIG_HAMACHI) += hamachi.o
obj-$(CONFIG_NET) += Space.o loopback.o
obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 3983e70..140dd73 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -39,6 +39,7 @@ source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/nuvoton/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
+source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
source "drivers/net/ethernet/qlogic/Kconfig"
source "drivers/net/ethernet/racal/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 873d275..8a97b19 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -30,6 +30,7 @@ obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
+obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
obj-$(CONFIG_NET_VENDOR_QLOGIC) += qlogic/
obj-$(CONFIG_NET_VENDOR_RACAL) += racal/
diff --git a/drivers/net/ethernet/packetengines/Kconfig b/drivers/net/ethernet/packetengines/Kconfig
new file mode 100644
index 0000000..4add1db
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Kconfig
@@ -0,0 +1,46 @@
+#
+# Packet engine device configuration
+#
+
+config NET_PACKET_ENGINE
+ bool "Packet Engine devices"
+ depends on PCI
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about packet engine devices. If you say Y, you will
+ be asked for your specific card in the following questions.
+
+if NET_PACKET_ENGINE
+
+config HAMACHI
+ tristate "Packet Engines Hamachi GNIC-II support"
+ depends on PCI
+ select MII
+ ---help---
+ If you have a Gigabit Ethernet card of this type, say Y and read
+ the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ To compile this driver as a module, choose M here. The module will be
+ called hamachi.
+
+config YELLOWFIN
+ tristate "Packet Engines Yellowfin Gigabit-NIC support (EXPERIMENTAL)"
+ depends on PCI && EXPERIMENTAL
+ select CRC32
+ ---help---
+ Say Y here if you have a Packet Engines G-NIC PCI Gigabit Ethernet
+ adapter or the SYM53C885 Ethernet controller. The Gigabit adapter is
+ used by the Beowulf Linux cluster project. See
+ <http://cesdis.gsfc.nasa.gov/linux/drivers/yellowfin.html> for more
+ information about this driver in particular and Beowulf in general.
+
+ To compile this driver as a module, choose M here: the module
+ will be called yellowfin. This is recommended.
+
+endif # NET_PACKET_ENGINE
diff --git a/drivers/net/ethernet/packetengines/Makefile b/drivers/net/ethernet/packetengines/Makefile
new file mode 100644
index 0000000..995ccd0
--- /dev/null
+++ b/drivers/net/ethernet/packetengines/Makefile
@@ -0,0 +1,6 @@
+#
+# Makefile for the Packet Engine network device drivers.
+#
+
+obj-$(CONFIG_HAMACHI) += hamachi.o
+obj-$(CONFIG_YELLOWFIN) += yellowfin.o
diff --git a/drivers/net/hamachi.c b/drivers/net/ethernet/packetengines/hamachi.c
similarity index 100%
rename from drivers/net/hamachi.c
rename to drivers/net/ethernet/packetengines/hamachi.c
diff --git a/drivers/net/yellowfin.c b/drivers/net/ethernet/packetengines/yellowfin.c
similarity index 100%
rename from drivers/net/yellowfin.c
rename to drivers/net/ethernet/packetengines/yellowfin.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 08/10] octeon: Move the Cavium driver
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (6 preceding siblings ...)
2011-08-12 10:52 ` [net-next 07/10] hamachi/yellowfin: Move the packet engine drivers Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 09/10] jme: Move the JME driver Jeff Kirsher
` (2 subsequent siblings)
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, David Daney
Move the Cavium driver to drivers/net/ethernet/octeon/ and
make the necessary Kconfig and Makefile changes.
CC: David Daney <david.daney@cavium.com>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Acked-by: David Daney <david.daney@cavium.com>
---
drivers/net/Kconfig | 2 --
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/{ => ethernet}/octeon/Kconfig | 6 +++++-
drivers/net/ethernet/octeon/Makefile | 5 +++++
drivers/net/{ => ethernet}/octeon/octeon_mgmt.c | 0
drivers/net/octeon/Makefile | 2 --
8 files changed, 12 insertions(+), 6 deletions(-)
rename drivers/net/{ => ethernet}/octeon/Kconfig (85%)
create mode 100644 drivers/net/ethernet/octeon/Makefile
rename drivers/net/{ => ethernet}/octeon/octeon_mgmt.c (100%)
delete mode 100644 drivers/net/octeon/Makefile
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 99b209e..b896621 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -506,8 +506,6 @@ config LANTIQ_ETOP
help
Support for the MII0 inside the Lantiq SoC
-source "drivers/net/octeon/Kconfig"
-
endif # NET_ETHERNET
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index d8c286e..648fa5c 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -105,5 +105,4 @@ obj-$(CONFIG_VIRTIO_NET) += virtio_net.o
obj-$(CONFIG_WIMAX) += wimax/
obj-$(CONFIG_CAIF) += caif/
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
obj-$(CONFIG_TILE_NET) += tile/
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 140dd73..70c60ef 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -38,6 +38,7 @@ source "drivers/net/ethernet/myricom/Kconfig"
source "drivers/net/ethernet/natsemi/Kconfig"
source "drivers/net/ethernet/8390/Kconfig"
source "drivers/net/ethernet/nuvoton/Kconfig"
+source "drivers/net/ethernet/octeon/Kconfig"
source "drivers/net/ethernet/oki-semi/Kconfig"
source "drivers/net/ethernet/packetengines/Kconfig"
source "drivers/net/ethernet/pasemi/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8a97b19..929ee29 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -29,6 +29,7 @@ obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
obj-$(CONFIG_NET_VENDOR_MYRI) += myricom/
obj-$(CONFIG_NET_VENDOR_NATSEMI) += natsemi/
obj-$(CONFIG_NET_VENDOR_NUVOTON) += nuvoton/
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon/
obj-$(CONFIG_NET_VENDOR_OKI) += oki-semi/
obj-$(CONFIG_NET_PACKET_ENGINE) += packetengines/
obj-$(CONFIG_NET_VENDOR_PASEMI) += pasemi/
diff --git a/drivers/net/octeon/Kconfig b/drivers/net/ethernet/octeon/Kconfig
similarity index 85%
rename from drivers/net/octeon/Kconfig
rename to drivers/net/ethernet/octeon/Kconfig
index 1e56bbf..3de52ff 100644
--- a/drivers/net/octeon/Kconfig
+++ b/drivers/net/ethernet/octeon/Kconfig
@@ -1,10 +1,14 @@
+#
+# Cavium network device configuration
+#
+
config OCTEON_MGMT_ETHERNET
tristate "Octeon Management port ethernet driver (CN5XXX, CN6XXX)"
depends on CPU_CAVIUM_OCTEON
select PHYLIB
select MDIO_OCTEON
default y
- help
+ ---help---
This option enables the ethernet driver for the management
port on Cavium Networks' Octeon CN57XX, CN56XX, CN55XX,
CN54XX, CN52XX, and CN6XXX chips.
diff --git a/drivers/net/ethernet/octeon/Makefile b/drivers/net/ethernet/octeon/Makefile
new file mode 100644
index 0000000..efa41c1
--- /dev/null
+++ b/drivers/net/ethernet/octeon/Makefile
@@ -0,0 +1,5 @@
+#
+# Makefile for the Cavium network device drivers.
+#
+
+obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon_mgmt.o
diff --git a/drivers/net/octeon/octeon_mgmt.c b/drivers/net/ethernet/octeon/octeon_mgmt.c
similarity index 100%
rename from drivers/net/octeon/octeon_mgmt.c
rename to drivers/net/ethernet/octeon/octeon_mgmt.c
diff --git a/drivers/net/octeon/Makefile b/drivers/net/octeon/Makefile
deleted file mode 100644
index 906edec..0000000
--- a/drivers/net/octeon/Makefile
+++ /dev/null
@@ -1,2 +0,0 @@
-
-obj-$(CONFIG_OCTEON_MGMT_ETHERNET) += octeon_mgmt.o
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 09/10] jme: Move the JME driver
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (7 preceding siblings ...)
2011-08-12 10:52 ` [net-next 08/10] octeon: Move the Cavium driver Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 10:52 ` [net-next 10/10] xilinx/ll_temac: Move the Xilinx drivers Jeff Kirsher
2011-08-12 11:35 ` [net-next 00/10] drivers/net organize Ethernet drivers (5th series) David Miller
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem; +Cc: Jeff Kirsher, netdev, gospo, sassmann, Guo-Fu Tseng
Move the JME driver into drivers/net/ethernet/ and make the
necessary Kconfig and Makefile changes.
CC: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
MAINTAINERS | 2 +-
drivers/net/Kconfig | 12 ------------
drivers/net/Makefile | 1 -
drivers/net/ethernet/Kconfig | 13 +++++++++++++
drivers/net/ethernet/Makefile | 1 +
drivers/net/{ => ethernet}/jme.c | 0
drivers/net/{ => ethernet}/jme.h | 0
7 files changed, 15 insertions(+), 14 deletions(-)
rename drivers/net/{ => ethernet}/jme.c (100%)
rename drivers/net/{ => ethernet}/jme.h (100%)
diff --git a/MAINTAINERS b/MAINTAINERS
index 622f4fc..37cbe14 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -3591,7 +3591,7 @@ JME NETWORK DRIVER
M: Guo-Fu Tseng <cooldavid@cooldavid.org>
L: netdev@vger.kernel.org
S: Maintained
-F: drivers/net/jme.*
+F: drivers/net/ethernet/jme.*
JOURNALLING FLASH FILE SYSTEM V2 (JFFS2)
M: David Woodhouse <dwmw2@infradead.org>
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index b896621..996bae0 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -547,18 +547,6 @@ config XILINX_LL_TEMAC
This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
core used in Xilinx Spartan and Virtex FPGAs
-config JME
- tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
- depends on PCI
- select CRC32
- select MII
- ---help---
- This driver supports the PCI-Express gigabit ethernet adapters
- based on JMicron JMC250 chipset.
-
- To compile this driver as a module, choose M here. The module
- will be called jme.
-
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 648fa5c..271fc52 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -8,7 +8,6 @@ obj-$(CONFIG_PHYLIB) += phy/
obj-$(CONFIG_IP1000) += ipg.o
obj-$(CONFIG_CAN) += can/
obj-$(CONFIG_BONDING) += bonding/
-obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_VMXNET3) += vmxnet3/
#
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index 70c60ef..c29c145 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -31,6 +31,19 @@ source "drivers/net/ethernet/ibm/Kconfig"
source "drivers/net/ethernet/intel/Kconfig"
source "drivers/net/ethernet/i825xx/Kconfig"
source "drivers/net/ethernet/xscale/Kconfig"
+
+config JME
+ tristate "JMicron(R) PCI-Express Gigabit Ethernet support"
+ depends on PCI
+ select CRC32
+ select MII
+ ---help---
+ This driver supports the PCI-Express gigabit ethernet adapters
+ based on JMicron JMC250 chipset.
+
+ To compile this driver as a module, choose M here. The module
+ will be called jme.
+
source "drivers/net/ethernet/marvell/Kconfig"
source "drivers/net/ethernet/mellanox/Kconfig"
source "drivers/net/ethernet/micrel/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 929ee29..8495c50 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -23,6 +23,7 @@ obj-$(CONFIG_NET_VENDOR_IBM) += ibm/
obj-$(CONFIG_NET_VENDOR_INTEL) += intel/
obj-$(CONFIG_NET_VENDOR_I825XX) += i825xx/
obj-$(CONFIG_NET_VENDOR_XSCALE) += xscale/
+obj-$(CONFIG_JME) += jme.o
obj-$(CONFIG_NET_VENDOR_MARVELL) += marvell/
obj-$(CONFIG_NET_VENDOR_MELLANOX) += mellanox/
obj-$(CONFIG_NET_VENDOR_MICREL) += micrel/
diff --git a/drivers/net/jme.c b/drivers/net/ethernet/jme.c
similarity index 100%
rename from drivers/net/jme.c
rename to drivers/net/ethernet/jme.c
diff --git a/drivers/net/jme.h b/drivers/net/ethernet/jme.h
similarity index 100%
rename from drivers/net/jme.h
rename to drivers/net/ethernet/jme.h
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* [net-next 10/10] xilinx/ll_temac: Move the Xilinx drivers
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (8 preceding siblings ...)
2011-08-12 10:52 ` [net-next 09/10] jme: Move the JME driver Jeff Kirsher
@ 2011-08-12 10:52 ` Jeff Kirsher
2011-08-12 11:35 ` [net-next 00/10] drivers/net organize Ethernet drivers (5th series) David Miller
10 siblings, 0 replies; 13+ messages in thread
From: Jeff Kirsher @ 2011-08-12 10:52 UTC (permalink / raw)
To: davem
Cc: Jeff Kirsher, netdev, gospo, sassmann, John Williams,
David H. Lynch Jr.
Move the Xilinx drivers into drivers/net/ethernet/xilinx/ and
make the necessary Kconfig and Makefile changes.
CC: John Williams <john.williams@petalogix.com>
CC: "David H. Lynch Jr." <dhlii@dlasys.net>
Signed-off-by: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
---
drivers/net/Kconfig | 15 --------
drivers/net/Makefile | 4 --
drivers/net/ethernet/Kconfig | 1 +
drivers/net/ethernet/Makefile | 1 +
drivers/net/ethernet/xilinx/Kconfig | 35 ++++++++++++++++++++
drivers/net/ethernet/xilinx/Makefile | 7 ++++
drivers/net/{ => ethernet/xilinx}/ll_temac.h | 0
drivers/net/{ => ethernet/xilinx}/ll_temac_main.c | 0
drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c | 0
.../net/{ => ethernet/xilinx}/xilinx_emaclite.c | 0
10 files changed, 44 insertions(+), 19 deletions(-)
create mode 100644 drivers/net/ethernet/xilinx/Kconfig
create mode 100644 drivers/net/ethernet/xilinx/Makefile
rename drivers/net/{ => ethernet/xilinx}/ll_temac.h (100%)
rename drivers/net/{ => ethernet/xilinx}/ll_temac_main.c (100%)
rename drivers/net/{ => ethernet/xilinx}/ll_temac_mdio.c (100%)
rename drivers/net/{ => ethernet/xilinx}/xilinx_emaclite.c (100%)
diff --git a/drivers/net/Kconfig b/drivers/net/Kconfig
index 996bae0..2607a44 100644
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
@@ -493,13 +493,6 @@ config NET_POCKET
the questions about this class of network devices. If you say Y, you
will be asked for your specific device in the following questions.
-config XILINX_EMACLITE
- tristate "Xilinx 10/100 Ethernet Lite support"
- depends on PPC32 || MICROBLAZE
- select PHYLIB
- help
- This driver supports the 10/100 Ethernet Lite from Xilinx.
-
config LANTIQ_ETOP
tristate "Lantiq SoC ETOP driver"
depends on SOC_TYPE_XWAY
@@ -539,14 +532,6 @@ config IP1000
To compile this driver as a module, choose M here: the module
will be called ipg. This is recommended.
-config XILINX_LL_TEMAC
- tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
- depends on PPC || MICROBLAZE
- select PHYLIB
- help
- This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
- core used in Xilinx Spartan and Virtex FPGAs
-
endif # NETDEV_1000
#
diff --git a/drivers/net/Makefile b/drivers/net/Makefile
index 271fc52..4c7af02 100644
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
@@ -33,10 +33,6 @@ obj-$(CONFIG_NET_SB1000) += sb1000.o
obj-$(CONFIG_HP100) += hp100.o
obj-$(CONFIG_FORCEDETH) += forcedeth.o
-ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
-obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
-obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
-
obj-$(CONFIG_PPP) += ppp_generic.o
obj-$(CONFIG_PPP_ASYNC) += ppp_async.o
obj-$(CONFIG_PPP_SYNC_TTY) += ppp_synctty.o
diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index c29c145..922f4d1 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -82,5 +82,6 @@ source "drivers/net/ethernet/ti/Kconfig"
source "drivers/net/ethernet/toshiba/Kconfig"
source "drivers/net/ethernet/tundra/Kconfig"
source "drivers/net/ethernet/via/Kconfig"
+source "drivers/net/ethernet/xilinx/Kconfig"
endif # ETHERNET
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 8495c50..fcecd5f 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -50,3 +50,4 @@ obj-$(CONFIG_NET_VENDOR_TI) += ti/
obj-$(CONFIG_NET_VENDOR_TOSHIBA) += toshiba/
obj-$(CONFIG_NET_VENDOR_TUNDRA) += tundra/
obj-$(CONFIG_NET_VENDOR_VIA) += via/
+obj-$(CONFIG_NET_VENDOR_XILINX) += xilinx/
diff --git a/drivers/net/ethernet/xilinx/Kconfig b/drivers/net/ethernet/xilinx/Kconfig
new file mode 100644
index 0000000..4e3aad4
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Kconfig
@@ -0,0 +1,35 @@
+#
+# Xilink device configuration
+#
+
+config NET_VENDOR_XILINX
+ bool "Xilinx devices"
+ depends on PPC || PPC32 || MICROBLAZE
+ ---help---
+ If you have a network (Ethernet) card belonging to this class, say Y
+ and read the Ethernet-HOWTO, available from
+ <http://www.tldp.org/docs.html#howto>.
+
+ Note that the answer to this question doesn't directly affect the
+ kernel: saying N will just cause the configurator to skip all
+ the questions about Xilinx devices. If you say Y, you will be asked
+ for your specific card in the following questions.
+
+if NET_VENDOR_XILINX
+
+config XILINX_EMACLITE
+ tristate "Xilinx 10/100 Ethernet Lite support"
+ depends on (PPC32 || MICROBLAZE)
+ select PHYLIB
+ ---help---
+ This driver supports the 10/100 Ethernet Lite from Xilinx.
+
+config XILINX_LL_TEMAC
+ tristate "Xilinx LL TEMAC (LocalLink Tri-mode Ethernet MAC) driver"
+ depends on (PPC || MICROBLAZE)
+ select PHYLIB
+ ---help---
+ This driver supports the Xilinx 10/100/1000 LocalLink TEMAC
+ core used in Xilinx Spartan and Virtex FPGAs
+
+endif # NET_VENDOR_XILINX
diff --git a/drivers/net/ethernet/xilinx/Makefile b/drivers/net/ethernet/xilinx/Makefile
new file mode 100644
index 0000000..5feac73
--- /dev/null
+++ b/drivers/net/ethernet/xilinx/Makefile
@@ -0,0 +1,7 @@
+#
+# Makefile for the Xilink network device drivers.
+#
+
+ll_temac-objs := ll_temac_main.o ll_temac_mdio.o
+obj-$(CONFIG_XILINX_LL_TEMAC) += ll_temac.o
+obj-$(CONFIG_XILINX_EMACLITE) += xilinx_emaclite.o
diff --git a/drivers/net/ll_temac.h b/drivers/net/ethernet/xilinx/ll_temac.h
similarity index 100%
rename from drivers/net/ll_temac.h
rename to drivers/net/ethernet/xilinx/ll_temac.h
diff --git a/drivers/net/ll_temac_main.c b/drivers/net/ethernet/xilinx/ll_temac_main.c
similarity index 100%
rename from drivers/net/ll_temac_main.c
rename to drivers/net/ethernet/xilinx/ll_temac_main.c
diff --git a/drivers/net/ll_temac_mdio.c b/drivers/net/ethernet/xilinx/ll_temac_mdio.c
similarity index 100%
rename from drivers/net/ll_temac_mdio.c
rename to drivers/net/ethernet/xilinx/ll_temac_mdio.c
diff --git a/drivers/net/xilinx_emaclite.c b/drivers/net/ethernet/xilinx/xilinx_emaclite.c
similarity index 100%
rename from drivers/net/xilinx_emaclite.c
rename to drivers/net/ethernet/xilinx/xilinx_emaclite.c
--
1.7.6
^ permalink raw reply related [flat|nested] 13+ messages in thread* Re: [net-next 00/10] drivers/net organize Ethernet drivers (5th series)
2011-08-12 10:52 [net-next 00/10] drivers/net organize Ethernet drivers (5th series) Jeff Kirsher
` (9 preceding siblings ...)
2011-08-12 10:52 ` [net-next 10/10] xilinx/ll_temac: Move the Xilinx drivers Jeff Kirsher
@ 2011-08-12 11:35 ` David Miller
10 siblings, 0 replies; 13+ messages in thread
From: David Miller @ 2011-08-12 11:35 UTC (permalink / raw)
To: jeffrey.t.kirsher; +Cc: netdev, gospo, sassmann
From: Jeff Kirsher <jeffrey.t.kirsher@intel.com>
Date: Fri, 12 Aug 2011 03:52:41 -0700
> This is the fifth of seven 10 patch series to move the Ethernet
> drivers into drivers/net/ethernet/
>
> The following are changes since commit 4c78893b3d107e2a053c8f51c526510857c09858:
> cnic: Fix select dependencies in bnx2fc/bnx2i Kconfig.
> and are available in the git repository at:
> master.kernel.org:/pub/scm/linux/kernel/git/jkirsher/next-organize master
Pulled, thanks Jeff.
^ permalink raw reply [flat|nested] 13+ messages in thread