[net 10/10] bnx2x: Clear MDC/MDIO warning message

[net 10/10] bnx2x: Clear MDC/MDIO warning message

[Yaniv Rosner]

This patch clears a warning message of "MDC/MDIO access timeout" which may
appear when interface is loaded due to missing clock setting before resetting
the LED, and starting periodic function too early.

Signed-off-by: Yaniv Rosner <yanivr@broadcom.com>
Signed-off-by: Eilon Greenstein <eilong@broadcom.com>
---
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c  |    1 -
 drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c |    2 +-
 2 files changed, 1 insertions(+), 2 deletions(-)

diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
index 44556b7..4b05481 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_cmn.c
@@ -1874,7 +1874,6 @@ int bnx2x_nic_load(struct bnx2x *bp, int load_mode)
 		 * bnx2x_periodic_task().
 		 */
 		smp_mb();
-		queue_delayed_work(bnx2x_wq, &bp->period_task, 0);
 	} else
 		bp->port.pmf = 0;
 
diff --git a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
index 7e41682..ad95324 100644
--- a/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
+++ b/drivers/net/ethernet/broadcom/bnx2x/bnx2x_link.c
@@ -12205,10 +12205,10 @@ int bnx2x_link_reset(struct link_params *params, struct link_vars *vars,
 	 * Hold it as vars low
 	 */
 	 /* clear link led */
+	bnx2x_set_mdio_clk(bp, params->chip_id, port);
 	bnx2x_set_led(params, vars, LED_MODE_OFF, 0);
 
 	if (reset_ext_phy) {
-		bnx2x_set_mdio_clk(bp, params->chip_id, port);
 		for (phy_index = EXT_PHY1; phy_index < params->num_phys;
 		      phy_index++) {
 			if (params->phy[phy_index].link_reset) {
-- 
1.7.7.1