From: "Bjørn Mork" <bjorn@mork.no>
To: netdev@vger.kernel.org
Cc: linux-usb@vger.kernel.org, "Bjørn Mork" <bjorn@mork.no>,
"Greg Suarez" <gsuarez@smithmicro.com>,
"Alexey Orishko" <alexey.orishko@stericsson.com>
Subject: [PATCH net,stable-3.8] net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility
Date: Thu, 14 Mar 2013 12:05:13 +0100 [thread overview]
Message-ID: <1363259113-6909-1-git-send-email-bjorn@mork.no> (raw)
commit bd329e1 ("net: cdc_ncm: do not bind to NCM compatible MBIM devices")
introduced a new policy, preferring MBIM for dual NCM/MBIM functions if
the cdc_mbim driver was enabled. This caused a regression for users
wanting to use NCM.
Devices implementing NCM backwards compatibility according to section
3.2 of the MBIM v1.0 specification allow either NCM or MBIM on a single
USB function, using different altsettings. The cdc_ncm and cdc_mbim
drivers will both probe such functions, and must agree on a common
policy for selecting either MBIM or NCM. Until now, this policy has
been set at build time based on CONFIG_USB_NET_CDC_MBIM.
Use a module parameter to set the system policy at runtime, allowing the
user to prefer NCM on systems with the cdc_mbim driver.
Cc: Greg Suarez <gsuarez@smithmicro.com>
Cc: Alexey Orishko <alexey.orishko@stericsson.com>
Reported-by: Geir Haatveit <nospam@haatveit.nu>
Reported-by: Tommi Kyntola <kynde@ts.ray.fi>
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=54791
Signed-off-by: Bjørn Mork <bjorn@mork.no>
---
We now have two users independently reporting this as a 3.8 regression,
so something needs to be done. I am not sure if adding a new module
parameter is acceptable for stable, but this problem is definitely a
regression and no other solutions came up in response to my RFC.
The only real alternative I see for stable, is disabling MBIM support
on any dual NCM/MBIM function. Which of course will be a regression
for any user wanting MBIM, making it unacceptable.
drivers/net/usb/cdc_mbim.c | 11 +---------
drivers/net/usb/cdc_ncm.c | 49 ++++++++++++++++++++++++++++---------------
include/linux/usb/cdc_ncm.h | 1 +
3 files changed, 34 insertions(+), 27 deletions(-)
diff --git a/drivers/net/usb/cdc_mbim.c b/drivers/net/usb/cdc_mbim.c
index 248d2dc..16c8429 100644
--- a/drivers/net/usb/cdc_mbim.c
+++ b/drivers/net/usb/cdc_mbim.c
@@ -68,18 +68,9 @@ static int cdc_mbim_bind(struct usbnet *dev, struct usb_interface *intf)
struct cdc_ncm_ctx *ctx;
struct usb_driver *subdriver = ERR_PTR(-ENODEV);
int ret = -ENODEV;
- u8 data_altsetting = CDC_NCM_DATA_ALTSETTING_NCM;
+ u8 data_altsetting = cdc_ncm_select_altsetting(dev, intf);
struct cdc_mbim_state *info = (void *)&dev->data;
- /* see if interface supports MBIM alternate setting */
- if (intf->num_altsetting == 2) {
- if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM);
- data_altsetting = CDC_NCM_DATA_ALTSETTING_MBIM;
- }
-
/* Probably NCM, defer for cdc_ncm_bind */
if (!cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
goto err;
diff --git a/drivers/net/usb/cdc_ncm.c b/drivers/net/usb/cdc_ncm.c
index 61b74a2..4709fa3 100644
--- a/drivers/net/usb/cdc_ncm.c
+++ b/drivers/net/usb/cdc_ncm.c
@@ -55,6 +55,14 @@
#define DRIVER_VERSION "14-Mar-2012"
+#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
+static bool prefer_mbim = true;
+#else
+static bool prefer_mbim;
+#endif
+module_param(prefer_mbim, bool, S_IRUGO | S_IWUSR);
+MODULE_PARM_DESC(prefer_mbim, "Prefer MBIM setting on dual NCM/MBIM functions");
+
static void cdc_ncm_txpath_bh(unsigned long param);
static void cdc_ncm_tx_timeout_start(struct cdc_ncm_ctx *ctx);
static enum hrtimer_restart cdc_ncm_tx_timer_cb(struct hrtimer *hr_timer);
@@ -550,9 +558,12 @@ void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf)
}
EXPORT_SYMBOL_GPL(cdc_ncm_unbind);
-static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+/* Select the MBIM altsetting iff it is preferred and available,
+ * returning the number of the corresponding data interface altsetting
+ */
+u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf)
{
- int ret;
+ struct usb_host_interface *alt;
/* The MBIM spec defines a NCM compatible default altsetting,
* which we may have matched:
@@ -568,23 +579,27 @@ static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
* endpoint descriptors, shall be constructed according to
* the rules given in section 6 (USB Device Model) of this
* specification."
- *
- * Do not bind to such interfaces, allowing cdc_mbim to handle
- * them
*/
-#if IS_ENABLED(CONFIG_USB_NET_CDC_MBIM)
- if ((intf->num_altsetting == 2) &&
- !usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_MBIM)) {
- if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
- return -ENODEV;
- else
- usb_set_interface(dev->udev,
- intf->cur_altsetting->desc.bInterfaceNumber,
- CDC_NCM_COMM_ALTSETTING_NCM);
+ if (prefer_mbim && intf->num_altsetting == 2) {
+ alt = usb_altnum_to_altsetting(intf, CDC_NCM_COMM_ALTSETTING_MBIM);
+ if (alt && cdc_ncm_comm_intf_is_mbim(alt) &&
+ !usb_set_interface(dev->udev,
+ intf->cur_altsetting->desc.bInterfaceNumber,
+ CDC_NCM_COMM_ALTSETTING_MBIM))
+ return CDC_NCM_DATA_ALTSETTING_MBIM;
}
-#endif
+ return CDC_NCM_DATA_ALTSETTING_NCM;
+}
+EXPORT_SYMBOL_GPL(cdc_ncm_select_altsetting);
+
+static int cdc_ncm_bind(struct usbnet *dev, struct usb_interface *intf)
+{
+ int ret;
+
+ /* MBIM backwards compatible function? */
+ cdc_ncm_select_altsetting(dev, intf);
+ if (cdc_ncm_comm_intf_is_mbim(intf->cur_altsetting))
+ return -ENODEV;
/* NCM data altsetting is always 1 */
ret = cdc_ncm_bind_common(dev, intf, 1);
diff --git a/include/linux/usb/cdc_ncm.h b/include/linux/usb/cdc_ncm.h
index 3b8f9d4..cc25b70 100644
--- a/include/linux/usb/cdc_ncm.h
+++ b/include/linux/usb/cdc_ncm.h
@@ -127,6 +127,7 @@ struct cdc_ncm_ctx {
u16 connected;
};
+extern u8 cdc_ncm_select_altsetting(struct usbnet *dev, struct usb_interface *intf);
extern int cdc_ncm_bind_common(struct usbnet *dev, struct usb_interface *intf, u8 data_altsetting);
extern void cdc_ncm_unbind(struct usbnet *dev, struct usb_interface *intf);
extern struct sk_buff *cdc_ncm_fill_tx_frame(struct cdc_ncm_ctx *ctx, struct sk_buff *skb, __le32 sign);
--
1.7.10.4
next reply other threads:[~2013-03-14 11:05 UTC|newest]
Thread overview: 5+ messages / expand[flat|nested] mbox.gz Atom feed top
2013-03-14 11:05 Bjørn Mork [this message]
[not found] ` <1363259113-6909-1-git-send-email-bjorn-yOkvZcmFvRU@public.gmane.org>
2013-03-15 5:22 ` [PATCH net,stable-3.8] net: cdc_ncm, cdc_mbim: allow user to prefer NCM for backwards compatibility Ben Hutchings
2013-03-15 7:02 ` Bjørn Mork
2013-03-16 17:51 ` Ben Hutchings
2013-03-17 16:00 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1363259113-6909-1-git-send-email-bjorn@mork.no \
--to=bjorn@mork.no \
--cc=alexey.orishko@stericsson.com \
--cc=gsuarez@smithmicro.com \
--cc=linux-usb@vger.kernel.org \
--cc=netdev@vger.kernel.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox