[PATCH net v3 0/4] r8152 bug fixes

[PATCH net v3 0/4] r8152 bug fixes

[Hayes Wang]

I split the code of stopping/waking tx queue into the another patch.

Hayes Wang (4):
  r8152: fix tx/rx memory overflow
  r8152: modify the tx flow
  r8152: support stopping/waking tx queue
  r8152: fix incorrect type in assignment

 drivers/net/usb/r8152.c | 109 ++++++++++++++++++++----------------------------
 1 file changed, 45 insertions(+), 64 deletions(-)

-- 
1.8.3.1

[PATCH net v3 1/4] r8152: fix tx/rx memory overflow

[Hayes Wang]

The tx/rx would access the memory which is out of the desired range.
Modify the method of checking the end of the memory to avoid it.

For r8152_tx_agg_fill(), the variable remain may become negative.
However, the declaration is unsigned, so the while loop wouldn't
break when reaching the end of the desied memory. Although to change
the declaration from unsigned to signed is enough to fix it, I also
modify the checking method for safe. Replace

		remain = rx_buf_sz - sizeof(*tx_desc) -
			 (u32)((void *)tx_data - agg->head);

with

		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);

to make sure the variable remain is always positive. Then, the
overflow wouldn't happen.

For rx_bottom(), the rx_desc should not be used to calculate the
packet length before making sure the rx_desc is in the desired range.
Change the checking to two parts. First, check the descriptor is in
the memory. The other, using the descriptor to find out the packet
length and check if the packet is in the memory.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f3fce41..5dbfe50 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -24,7 +24,7 @@
 #include <linux/ipv6.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.01.0 (2013/08/12)"
+#define DRIVER_VERSION "v1.02.0 (2013/10/28)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
 #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -1136,14 +1136,14 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
 
 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 {
-	u32 remain;
+	int remain;
 	u8 *tx_data;
 
 	tx_data = agg->head;
 	agg->skb_num = agg->skb_len = 0;
-	remain = rx_buf_sz - sizeof(struct tx_desc);
+	remain = rx_buf_sz;
 
-	while (remain >= ETH_ZLEN) {
+	while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
 		struct tx_desc *tx_desc;
 		struct sk_buff *skb;
 		unsigned int len;
@@ -1152,12 +1152,14 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		if (!skb)
 			break;
 
+		remain -= sizeof(*tx_desc);
 		len = skb->len;
 		if (remain < len) {
 			skb_queue_head(&tp->tx_queue, skb);
 			break;
 		}
 
+		tx_data = tx_agg_align(tx_data);
 		tx_desc = (struct tx_desc *)tx_data;
 		tx_data += sizeof(*tx_desc);
 
@@ -1167,9 +1169,8 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		agg->skb_len += len;
 		dev_kfree_skb_any(skb);
 
-		tx_data = tx_agg_align(tx_data + len);
-		remain = rx_buf_sz - sizeof(*tx_desc) -
-			 (u32)((void *)tx_data - agg->head);
+		tx_data += len;
+		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
@@ -1188,7 +1189,6 @@ static void rx_bottom(struct r8152 *tp)
 	list_for_each_safe(cursor, next, &tp->rx_done) {
 		struct rx_desc *rx_desc;
 		struct rx_agg *agg;
-		unsigned pkt_len;
 		int len_used = 0;
 		struct urb *urb;
 		u8 *rx_data;
@@ -1204,17 +1204,22 @@ static void rx_bottom(struct r8152 *tp)
 
 		rx_desc = agg->head;
 		rx_data = agg->head;
-		pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
-		len_used += sizeof(struct rx_desc) + pkt_len;
+		len_used += sizeof(struct rx_desc);
 
-		while (urb->actual_length >= len_used) {
+		while (urb->actual_length > len_used) {
 			struct net_device *netdev = tp->netdev;
 			struct net_device_stats *stats;
+			unsigned pkt_len;
 			struct sk_buff *skb;
 
+			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 			if (pkt_len < ETH_ZLEN)
 				break;
 
+			len_used += pkt_len;
+			if (urb->actual_length < len_used)
+				break;
+
 			stats = rtl8152_get_stats(netdev);
 
 			pkt_len -= 4; /* CRC */
@@ -1234,9 +1239,8 @@ static void rx_bottom(struct r8152 *tp)
 
 			rx_data = rx_agg_align(rx_data + pkt_len + 4);
 			rx_desc = (struct rx_desc *)rx_data;
-			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 			len_used = (int)(rx_data - (u8 *)agg->head);
-			len_used += sizeof(struct rx_desc) + pkt_len;
+			len_used += sizeof(struct rx_desc);
 		}
 
 submit:
-- 
1.8.3.1

Re: [PATCH net v3 1/4] r8152: fix tx/rx memory overflow

[David Miller]

From: Hayes Wang <hayeswang@realtek.com>
Date: Fri, 15 Nov 2013 15:57:56 +0800

> +			unsigned pkt_len;

Please fully specify the type as "unsigned int".  Please check for this
problem in the rest of your patches too.

Thanks.

RE: [PATCH net v3 1/4] r8152: fix tx/rx memory overflow

[hayeswang]

David Miller [mailto:davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org] 
> Sent: Saturday, November 16, 2013 6:40 AM
> To: Hayeswang
> Cc: netdev-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; nic_swsd; 
> linux-kernel-u79uwXL29TY76Z2rM5mHXA@public.gmane.org; linux-usb-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
> Subject: Re: [PATCH net v3 1/4] r8152: fix tx/rx memory overflow
> 
> From: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
> Date: Fri, 15 Nov 2013 15:57:56 +0800
> 
> > +			unsigned pkt_len;
> 
> Please fully specify the type as "unsigned int".  Please 
> check for this
> problem in the rest of your patches too.

I would fix it.

I check the other patches, and I don't find the same problem.

Thanks.
 
Best Regards,
Hayes

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net v3 2/4] r8152: modify the tx flow

[Hayes Wang]

Remove the code for sending the packet in the rtl8152_start_xmit().
Let rtl8152_start_xmit() to queue the packet only, and schedule a
tasklet to send the queued packets. This simplify the code and make
sure all the packet would be sent by the original order.

Signed-off-by: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
---
 drivers/net/usb/r8152.c | 46 +++-------------------------------------------
 1 file changed, 3 insertions(+), 43 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 5dbfe50..763234d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1388,53 +1388,13 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 					    struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
-	struct net_device_stats *stats = rtl8152_get_stats(netdev);
-	unsigned long flags;
-	struct tx_agg *agg = NULL;
-	struct tx_desc *tx_desc;
-	unsigned int len;
-	u8 *tx_data;
-	int res;
 
 	skb_tx_timestamp(skb);
 
-	/* If tx_queue is not empty, it means at least one previous packt */
-	/* is waiting for sending. Don't send current one before it.      */
-	if (skb_queue_empty(&tp->tx_queue))
-		agg = r8152_get_tx_agg(tp);
-
-	if (!agg) {
-		skb_queue_tail(&tp->tx_queue, skb);
-		return NETDEV_TX_OK;
-	}
-
-	tx_desc = (struct tx_desc *)agg->head;
-	tx_data = agg->head + sizeof(*tx_desc);
-	agg->skb_num = agg->skb_len = 0;
+	skb_queue_tail(&tp->tx_queue, skb);
 
-	len = skb->len;
-	r8152_tx_csum(tp, tx_desc, skb);
-	memcpy(tx_data, skb->data, len);
-	dev_kfree_skb_any(skb);
-	agg->skb_num++;
-	agg->skb_len += len;
-	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
-			  agg->head, len + sizeof(*tx_desc),
-			  (usb_complete_t)write_bulk_callback, agg);
-	res = usb_submit_urb(agg->urb, GFP_ATOMIC);
-	if (res) {
-		/* Can we get/handle EPIPE here? */
-		if (res == -ENODEV) {
-			netif_device_detach(tp->netdev);
-		} else {
-			netif_warn(tp, tx_err, netdev,
-				   "failed tx_urb %d\n", res);
-			stats->tx_dropped++;
-			spin_lock_irqsave(&tp->tx_lock, flags);
-			list_add_tail(&agg->list, &tp->tx_free);
-			spin_unlock_irqrestore(&tp->tx_lock, flags);
-		}
-	}
+	if (!list_empty(&tp->tx_free))
+		tasklet_schedule(&tp->tl);
 
 	return NETDEV_TX_OK;
 }
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net v3 3/4] r8152: support stopping/waking tx queue

[Hayes Wang]

The maximum packet number which a tx aggregation buffer could contain
is the buffer size / (packet size + descriptor size).

If the tx buffer is empty and the tx queue length is more than the
maximum value which is defined above, stop the tx queue. Wake the tx
queue after any queued packet is filled in a available tx buffer.

Signed-off-by: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
---
 drivers/net/usb/r8152.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 763234d..81a4171 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -365,6 +365,7 @@ struct r8152 {
 	struct mii_if_info mii;
 	int intr_interval;
 	u32 msg_enable;
+	u32 tx_qlen;
 	u16 ocp_base;
 	u8 *intr_buff;
 	u8 version;
@@ -1173,6 +1174,9 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
+	if (netif_queue_stopped(tp->netdev))
+		netif_wake_queue(tp->netdev);
+
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
 			  agg->head, (int)(tx_data - (u8 *)agg->head),
 			  (usb_complete_t)write_bulk_callback, agg);
@@ -1393,6 +1397,10 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 
 	skb_queue_tail(&tp->tx_queue, skb);
 
+	if (list_empty(&tp->tx_free) &&
+	    skb_queue_len(&tp->tx_queue) > tp->tx_qlen)
+		netif_stop_queue(netdev);
+
 	if (!list_empty(&tp->tx_free))
 		tasklet_schedule(&tp->tl);
 
@@ -1423,6 +1431,14 @@ static void rtl8152_nic_reset(struct r8152 *tp)
 	}
 }
 
+static void set_tx_qlen(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	tp->tx_qlen = rx_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + VLAN_HLEN +
+				   sizeof(struct tx_desc));
+}
+
 static inline u8 rtl8152_get_speed(struct r8152 *tp)
 {
 	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
@@ -1434,6 +1450,7 @@ static int rtl8152_enable(struct r8152 *tp)
 	int i, ret;
 	u8 speed;
 
+	set_tx_qlen(tp);
 	speed = rtl8152_get_speed(tp);
 	if (speed & _10bps) {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net v3 4/4] r8152: fix incorrect type in assignment

[Hayes Wang]

The data from the hardware should be little endian. Correct the
declaration.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 81a4171..25e8fa8 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -307,22 +307,22 @@ enum rtl8152_flags {
 #define MCU_TYPE_USB			0x0000
 
 struct rx_desc {
-	u32 opts1;
+	__le32 opts1;
 #define RX_LEN_MASK			0x7fff
-	u32 opts2;
-	u32 opts3;
-	u32 opts4;
-	u32 opts5;
-	u32 opts6;
+	__le32 opts2;
+	__le32 opts3;
+	__le32 opts4;
+	__le32 opts5;
+	__le32 opts6;
 };
 
 struct tx_desc {
-	u32 opts1;
+	__le32 opts1;
 #define TX_FS			(1 << 31) /* First segment of a packet */
 #define TX_LS			(1 << 30) /* Final segment of a packet */
 #define TX_LEN_MASK		0x3ffff
 
-	u32 opts2;
+	__le32 opts2;
 #define UDP_CS			(1 << 31) /* Calculate UDP/IP checksum */
 #define TCP_CS			(1 << 30) /* Calculate TCP/IP checksum */
 #define IPV4_CS			(1 << 29) /* Calculate IPv4 checksum */
@@ -877,7 +877,7 @@ static void write_bulk_callback(struct urb *urb)
 static void intr_callback(struct urb *urb)
 {
 	struct r8152 *tp;
-	__u16 *d;
+	__le16 *d;
 	int status = urb->status;
 	int res;
 
-- 
1.8.3.1

[PATCH net v4 0/4] r8152 bug fixes

[Hayes Wang]

For the patch #1, I modify the type of the variable "pkt_len" from "unsigned"
to "unsigned int".

Hayes Wang (4):
  r8152: fix tx/rx memory overflow
  r8152: modify the tx flow
  r8152: support stopping/waking tx queue
  r8152: fix incorrect type in assignment

 drivers/net/usb/r8152.c | 109 ++++++++++++++++++++----------------------------
 1 file changed, 45 insertions(+), 64 deletions(-)

-- 
1.8.3.1

[PATCH net v4 1/4] r8152: fix tx/rx memory overflow

[Hayes Wang]

The tx/rx would access the memory which is out of the desired range.
Modify the method of checking the end of the memory to avoid it.

For r8152_tx_agg_fill(), the variable remain may become negative.
However, the declaration is unsigned, so the while loop wouldn't
break when reaching the end of the desied memory. Although to change
the declaration from unsigned to signed is enough to fix it, I also
modify the checking method for safe. Replace

		remain = rx_buf_sz - sizeof(*tx_desc) -
			 (u32)((void *)tx_data - agg->head);

with

		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);

to make sure the variable remain is always positive. Then, the
overflow wouldn't happen.

For rx_bottom(), the rx_desc should not be used to calculate the
packet length before making sure the rx_desc is in the desired range.
Change the checking to two parts. First, check the descriptor is in
the memory. The other, using the descriptor to find out the packet
length and check if the packet is in the memory.

Signed-off-by: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
---
 drivers/net/usb/r8152.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f3fce41..428600d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -24,7 +24,7 @@
 #include <linux/ipv6.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.01.0 (2013/08/12)"
+#define DRIVER_VERSION "v1.02.0 (2013/10/28)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>"
 #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -1136,14 +1136,14 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
 
 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 {
-	u32 remain;
+	int remain;
 	u8 *tx_data;
 
 	tx_data = agg->head;
 	agg->skb_num = agg->skb_len = 0;
-	remain = rx_buf_sz - sizeof(struct tx_desc);
+	remain = rx_buf_sz;
 
-	while (remain >= ETH_ZLEN) {
+	while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
 		struct tx_desc *tx_desc;
 		struct sk_buff *skb;
 		unsigned int len;
@@ -1152,12 +1152,14 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		if (!skb)
 			break;
 
+		remain -= sizeof(*tx_desc);
 		len = skb->len;
 		if (remain < len) {
 			skb_queue_head(&tp->tx_queue, skb);
 			break;
 		}
 
+		tx_data = tx_agg_align(tx_data);
 		tx_desc = (struct tx_desc *)tx_data;
 		tx_data += sizeof(*tx_desc);
 
@@ -1167,9 +1169,8 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		agg->skb_len += len;
 		dev_kfree_skb_any(skb);
 
-		tx_data = tx_agg_align(tx_data + len);
-		remain = rx_buf_sz - sizeof(*tx_desc) -
-			 (u32)((void *)tx_data - agg->head);
+		tx_data += len;
+		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
@@ -1188,7 +1189,6 @@ static void rx_bottom(struct r8152 *tp)
 	list_for_each_safe(cursor, next, &tp->rx_done) {
 		struct rx_desc *rx_desc;
 		struct rx_agg *agg;
-		unsigned pkt_len;
 		int len_used = 0;
 		struct urb *urb;
 		u8 *rx_data;
@@ -1204,17 +1204,22 @@ static void rx_bottom(struct r8152 *tp)
 
 		rx_desc = agg->head;
 		rx_data = agg->head;
-		pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
-		len_used += sizeof(struct rx_desc) + pkt_len;
+		len_used += sizeof(struct rx_desc);
 
-		while (urb->actual_length >= len_used) {
+		while (urb->actual_length > len_used) {
 			struct net_device *netdev = tp->netdev;
 			struct net_device_stats *stats;
+			unsigned int pkt_len;
 			struct sk_buff *skb;
 
+			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 			if (pkt_len < ETH_ZLEN)
 				break;
 
+			len_used += pkt_len;
+			if (urb->actual_length < len_used)
+				break;
+
 			stats = rtl8152_get_stats(netdev);
 
 			pkt_len -= 4; /* CRC */
@@ -1234,9 +1239,8 @@ static void rx_bottom(struct r8152 *tp)
 
 			rx_data = rx_agg_align(rx_data + pkt_len + 4);
 			rx_desc = (struct rx_desc *)rx_data;
-			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 			len_used = (int)(rx_data - (u8 *)agg->head);
-			len_used += sizeof(struct rx_desc) + pkt_len;
+			len_used += sizeof(struct rx_desc);
 		}
 
 submit:
-- 
1.8.3.1

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[PATCH net v4 2/4] r8152: modify the tx flow

[Hayes Wang]

Remove the code for sending the packet in the rtl8152_start_xmit().
Let rtl8152_start_xmit() to queue the packet only, and schedule a
tasklet to send the queued packets. This simplify the code and make
sure all the packet would be sent by the original order.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 46 +++-------------------------------------------
 1 file changed, 3 insertions(+), 43 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 428600d..8a786b6 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1388,53 +1388,13 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 					    struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
-	struct net_device_stats *stats = rtl8152_get_stats(netdev);
-	unsigned long flags;
-	struct tx_agg *agg = NULL;
-	struct tx_desc *tx_desc;
-	unsigned int len;
-	u8 *tx_data;
-	int res;
 
 	skb_tx_timestamp(skb);
 
-	/* If tx_queue is not empty, it means at least one previous packt */
-	/* is waiting for sending. Don't send current one before it.      */
-	if (skb_queue_empty(&tp->tx_queue))
-		agg = r8152_get_tx_agg(tp);
-
-	if (!agg) {
-		skb_queue_tail(&tp->tx_queue, skb);
-		return NETDEV_TX_OK;
-	}
-
-	tx_desc = (struct tx_desc *)agg->head;
-	tx_data = agg->head + sizeof(*tx_desc);
-	agg->skb_num = agg->skb_len = 0;
+	skb_queue_tail(&tp->tx_queue, skb);
 
-	len = skb->len;
-	r8152_tx_csum(tp, tx_desc, skb);
-	memcpy(tx_data, skb->data, len);
-	dev_kfree_skb_any(skb);
-	agg->skb_num++;
-	agg->skb_len += len;
-	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
-			  agg->head, len + sizeof(*tx_desc),
-			  (usb_complete_t)write_bulk_callback, agg);
-	res = usb_submit_urb(agg->urb, GFP_ATOMIC);
-	if (res) {
-		/* Can we get/handle EPIPE here? */
-		if (res == -ENODEV) {
-			netif_device_detach(tp->netdev);
-		} else {
-			netif_warn(tp, tx_err, netdev,
-				   "failed tx_urb %d\n", res);
-			stats->tx_dropped++;
-			spin_lock_irqsave(&tp->tx_lock, flags);
-			list_add_tail(&agg->list, &tp->tx_free);
-			spin_unlock_irqrestore(&tp->tx_lock, flags);
-		}
-	}
+	if (!list_empty(&tp->tx_free))
+		tasklet_schedule(&tp->tl);
 
 	return NETDEV_TX_OK;
 }
-- 
1.8.3.1

[PATCH net v4 3/4] r8152: support stopping/waking tx queue

[Hayes Wang]

The maximum packet number which a tx aggregation buffer could contain
is the buffer size / (packet size + descriptor size).

If the tx buffer is empty and the tx queue length is more than the
maximum value which is defined above, stop the tx queue. Wake the tx
queue after any queued packet is filled in a available tx buffer.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 17 +++++++++++++++++
 1 file changed, 17 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8a786b6..0ac2b53 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -365,6 +365,7 @@ struct r8152 {
 	struct mii_if_info mii;
 	int intr_interval;
 	u32 msg_enable;
+	u32 tx_qlen;
 	u16 ocp_base;
 	u8 *intr_buff;
 	u8 version;
@@ -1173,6 +1174,9 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
+	if (netif_queue_stopped(tp->netdev))
+		netif_wake_queue(tp->netdev);
+
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
 			  agg->head, (int)(tx_data - (u8 *)agg->head),
 			  (usb_complete_t)write_bulk_callback, agg);
@@ -1393,6 +1397,10 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 
 	skb_queue_tail(&tp->tx_queue, skb);
 
+	if (list_empty(&tp->tx_free) &&
+	    skb_queue_len(&tp->tx_queue) > tp->tx_qlen)
+		netif_stop_queue(netdev);
+
 	if (!list_empty(&tp->tx_free))
 		tasklet_schedule(&tp->tl);
 
@@ -1423,6 +1431,14 @@ static void rtl8152_nic_reset(struct r8152 *tp)
 	}
 }
 
+static void set_tx_qlen(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	tp->tx_qlen = rx_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + VLAN_HLEN +
+				   sizeof(struct tx_desc));
+}
+
 static inline u8 rtl8152_get_speed(struct r8152 *tp)
 {
 	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
@@ -1434,6 +1450,7 @@ static int rtl8152_enable(struct r8152 *tp)
 	int i, ret;
 	u8 speed;
 
+	set_tx_qlen(tp);
 	speed = rtl8152_get_speed(tp);
 	if (speed & _10bps) {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-- 
1.8.3.1

Re: [PATCH net v4 3/4] r8152: support stopping/waking tx queue

[David Miller]

From: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
Date: Tue, 19 Nov 2013 11:25:10 +0800

> The maximum packet number which a tx aggregation buffer could contain
> is the buffer size / (packet size + descriptor size).
> 
> If the tx buffer is empty and the tx queue length is more than the
> maximum value which is defined above, stop the tx queue. Wake the tx
> queue after any queued packet is filled in a available tx buffer.
> 
> Signed-off-by: Hayes Wang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>

This is racy.

You have nothing which synchronizes r8152_tx_agg_fill() and rtl8152_start_xmit(),
therefore:

> +	if (netif_queue_stopped(tp->netdev))
> +		netif_wake_queue(tp->netdev);
> +

A netif_stop_queue() can occur right after the netif_queue_stopped() check,
meaning you can end up with the queue being stopped forever and the TX queue
stuck.

I am finding this patch series _very_ tiring, every single time I take
the time to review it, I find major problems.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH net v4 3/4] r8152: support stopping/waking tx queue

[hayeswang]

 David Miller [mailto:davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org] 
[...]
> This is racy.
> 
> You have nothing which synchronizes r8152_tx_agg_fill() and 
> rtl8152_start_xmit(),
> therefore:
> 
> > +	if (netif_queue_stopped(tp->netdev))
> > +		netif_wake_queue(tp->netdev);
> > +
> 
> A netif_stop_queue() can occur right after the 
> netif_queue_stopped() check,
> meaning you can end up with the queue being stopped forever 
> and the TX queue
> stuck.

If the situation occurs, it means there is no tx buffer at that time. If the
netif_wake_queue() is called, only one more packet would be queued and the tx
queue would be stopped again after calling rtl8152_start_xmit(). That is, it
is not necessary to wake the queue. Besides, after the tx is completed, another
tasklet would be scheduled if there is any packet which is queued in the list.
That is, the r8152_tx_agg_fill() would be called and the netif_queue_stopped()
would be check againg, so the tx queue would not be stopped forever.
 
Best Regards,
Hayes

--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

Re: [PATCH net v4 3/4] r8152: support stopping/waking tx queue

[David Miller]

From: hayeswang <hayeswang-Rasf1IRRPZFBDgjK7y7TUQ@public.gmane.org>
Date: Wed, 20 Nov 2013 11:28:46 +0800

>  David Miller [mailto:davem-fT/PcQaiUtIeIZ0/mPfg9Q@public.gmane.org] 
> [...]
>> This is racy.
>> 
>> You have nothing which synchronizes r8152_tx_agg_fill() and 
>> rtl8152_start_xmit(),
>> therefore:
>> 
>> > +	if (netif_queue_stopped(tp->netdev))
>> > +		netif_wake_queue(tp->netdev);
>> > +
>> 
>> A netif_stop_queue() can occur right after the 
>> netif_queue_stopped() check,
>> meaning you can end up with the queue being stopped forever 
>> and the TX queue
>> stuck.
> 
> If the situation occurs, it means there is no tx buffer at that time. If the
> netif_wake_queue() is called, only one more packet would be queued and the tx
> queue would be stopped again after calling rtl8152_start_xmit(). That is, it
> is not necessary to wake the queue. Besides, after the tx is completed, another
> tasklet would be scheduled if there is any packet which is queued in the list.
> That is, the r8152_tx_agg_fill() would be called and the netif_queue_stopped()
> would be check againg, so the tx queue would not be stopped forever.

Then the queue can be woken when in fact r8152_start_xmit() is not able to
actually queue packets.  It is just as equally problematic.

You have to synchronize this state, somehow.

tg3 driver does this by taking netif tx queue lock during the wake
test sequence in TX reclaim.  This works because ->ndo_start_xmit() is
run with this lock held.
--
To unsubscribe from this list: send the line "unsubscribe linux-usb" in
the body of a message to majordomo-u79uwXL29TY76Z2rM5mHXA@public.gmane.org
More majordomo info at  http://vger.kernel.org/majordomo-info.html

RE: [PATCH net v4 3/4] r8152: support stopping/waking tx queue

[hayeswang]

 David Miller [mailto:davem@davemloft.net] 
[...]
> > If the situation occurs, it means there is no tx buffer at 
> that time. If the
> > netif_wake_queue() is called, only one more packet would be 
> queued and the tx
> > queue would be stopped again after calling 
> rtl8152_start_xmit(). That is, it
> > is not necessary to wake the queue. Besides, after the tx 
> is completed, another
> > tasklet would be scheduled if there is any packet which is 
> queued in the list.
> > That is, the r8152_tx_agg_fill() would be called and the 
> netif_queue_stopped()
> > would be check againg, so the tx queue would not be stopped forever.
> 
> Then the queue can be woken when in fact r8152_start_xmit() 
> is not able to
> actually queue packets.  It is just as equally problematic.
> 
> You have to synchronize this state, somehow.
> 
> tg3 driver does this by taking netif tx queue lock during the wake
> test sequence in TX reclaim.  This works because ->ndo_start_xmit() is
> run with this lock held.

Thanks for your answer. I would modify it.

[PATCH net v4 4/4] r8152: fix incorrect type in assignment

[Hayes Wang]

The data from the hardware should be little endian. Correct the
declaration.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 0ac2b53..fb35e6e 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -307,22 +307,22 @@ enum rtl8152_flags {
 #define MCU_TYPE_USB			0x0000
 
 struct rx_desc {
-	u32 opts1;
+	__le32 opts1;
 #define RX_LEN_MASK			0x7fff
-	u32 opts2;
-	u32 opts3;
-	u32 opts4;
-	u32 opts5;
-	u32 opts6;
+	__le32 opts2;
+	__le32 opts3;
+	__le32 opts4;
+	__le32 opts5;
+	__le32 opts6;
 };
 
 struct tx_desc {
-	u32 opts1;
+	__le32 opts1;
 #define TX_FS			(1 << 31) /* First segment of a packet */
 #define TX_LS			(1 << 30) /* Final segment of a packet */
 #define TX_LEN_MASK		0x3ffff
 
-	u32 opts2;
+	__le32 opts2;
 #define UDP_CS			(1 << 31) /* Calculate UDP/IP checksum */
 #define TCP_CS			(1 << 30) /* Calculate TCP/IP checksum */
 #define IPV4_CS			(1 << 29) /* Calculate IPv4 checksum */
@@ -877,7 +877,7 @@ static void write_bulk_callback(struct urb *urb)
 static void intr_callback(struct urb *urb)
 {
 	struct r8152 *tp;
-	__u16 *d;
+	__le16 *d;
 	int status = urb->status;
 	int res;
 
-- 
1.8.3.1

[PATCH net v5 0/4] r8152 bug fixes

[Hayes Wang]

For the patch #3, I add netif_tx_lock() before checking the
netif_queue_stopped(). Besides, I add checking the skb queue
length before waking the tx queue.

Hayes Wang (4):
  r8152: fix tx/rx memory overflow
  r8152: modify the tx flow
  r8152: support stopping/waking tx queue
  r8152: fix incorrect type in assignment

 drivers/net/usb/r8152.c | 114 +++++++++++++++++++++---------------------------
 1 file changed, 50 insertions(+), 64 deletions(-)

-- 
1.8.3.1

[PATCH net v5 1/4] r8152: fix tx/rx memory overflow

[Hayes Wang]

The tx/rx would access the memory which is out of the desired range.
Modify the method of checking the end of the memory to avoid it.

For r8152_tx_agg_fill(), the variable remain may become negative.
However, the declaration is unsigned, so the while loop wouldn't
break when reaching the end of the desied memory. Although to change
the declaration from unsigned to signed is enough to fix it, I also
modify the checking method for safe. Replace

		remain = rx_buf_sz - sizeof(*tx_desc) -
			 (u32)((void *)tx_data - agg->head);

with

		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);

to make sure the variable remain is always positive. Then, the
overflow wouldn't happen.

For rx_bottom(), the rx_desc should not be used to calculate the
packet length before making sure the rx_desc is in the desired range.
Change the checking to two parts. First, check the descriptor is in
the memory. The other, using the descriptor to find out the packet
length and check if the packet is in the memory.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 30 +++++++++++++++++-------------
 1 file changed, 17 insertions(+), 13 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f3fce41..428600d 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -24,7 +24,7 @@
 #include <linux/ipv6.h>
 
 /* Version Information */
-#define DRIVER_VERSION "v1.01.0 (2013/08/12)"
+#define DRIVER_VERSION "v1.02.0 (2013/10/28)"
 #define DRIVER_AUTHOR "Realtek linux nic maintainers <nic_swsd@realtek.com>"
 #define DRIVER_DESC "Realtek RTL8152 Based USB 2.0 Ethernet Adapters"
 #define MODULENAME "r8152"
@@ -1136,14 +1136,14 @@ r8152_tx_csum(struct r8152 *tp, struct tx_desc *desc, struct sk_buff *skb)
 
 static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 {
-	u32 remain;
+	int remain;
 	u8 *tx_data;
 
 	tx_data = agg->head;
 	agg->skb_num = agg->skb_len = 0;
-	remain = rx_buf_sz - sizeof(struct tx_desc);
+	remain = rx_buf_sz;
 
-	while (remain >= ETH_ZLEN) {
+	while (remain >= ETH_ZLEN + sizeof(struct tx_desc)) {
 		struct tx_desc *tx_desc;
 		struct sk_buff *skb;
 		unsigned int len;
@@ -1152,12 +1152,14 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		if (!skb)
 			break;
 
+		remain -= sizeof(*tx_desc);
 		len = skb->len;
 		if (remain < len) {
 			skb_queue_head(&tp->tx_queue, skb);
 			break;
 		}
 
+		tx_data = tx_agg_align(tx_data);
 		tx_desc = (struct tx_desc *)tx_data;
 		tx_data += sizeof(*tx_desc);
 
@@ -1167,9 +1169,8 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		agg->skb_len += len;
 		dev_kfree_skb_any(skb);
 
-		tx_data = tx_agg_align(tx_data + len);
-		remain = rx_buf_sz - sizeof(*tx_desc) -
-			 (u32)((void *)tx_data - agg->head);
+		tx_data += len;
+		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
@@ -1188,7 +1189,6 @@ static void rx_bottom(struct r8152 *tp)
 	list_for_each_safe(cursor, next, &tp->rx_done) {
 		struct rx_desc *rx_desc;
 		struct rx_agg *agg;
-		unsigned pkt_len;
 		int len_used = 0;
 		struct urb *urb;
 		u8 *rx_data;
@@ -1204,17 +1204,22 @@ static void rx_bottom(struct r8152 *tp)
 
 		rx_desc = agg->head;
 		rx_data = agg->head;
-		pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
-		len_used += sizeof(struct rx_desc) + pkt_len;
+		len_used += sizeof(struct rx_desc);
 
-		while (urb->actual_length >= len_used) {
+		while (urb->actual_length > len_used) {
 			struct net_device *netdev = tp->netdev;
 			struct net_device_stats *stats;
+			unsigned int pkt_len;
 			struct sk_buff *skb;
 
+			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 			if (pkt_len < ETH_ZLEN)
 				break;
 
+			len_used += pkt_len;
+			if (urb->actual_length < len_used)
+				break;
+
 			stats = rtl8152_get_stats(netdev);
 
 			pkt_len -= 4; /* CRC */
@@ -1234,9 +1239,8 @@ static void rx_bottom(struct r8152 *tp)
 
 			rx_data = rx_agg_align(rx_data + pkt_len + 4);
 			rx_desc = (struct rx_desc *)rx_data;
-			pkt_len = le32_to_cpu(rx_desc->opts1) & RX_LEN_MASK;
 			len_used = (int)(rx_data - (u8 *)agg->head);
-			len_used += sizeof(struct rx_desc) + pkt_len;
+			len_used += sizeof(struct rx_desc);
 		}
 
 submit:
-- 
1.8.3.1

[PATCH net v5 2/4] r8152: modify the tx flow

[Hayes Wang]

Remove the code for sending the packet in the rtl8152_start_xmit().
Let rtl8152_start_xmit() to queue the packet only, and schedule a
tasklet to send the queued packets. This simplify the code and make
sure all the packet would be sent by the original order.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 46 +++-------------------------------------------
 1 file changed, 3 insertions(+), 43 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 428600d..8a786b6 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -1388,53 +1388,13 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 					    struct net_device *netdev)
 {
 	struct r8152 *tp = netdev_priv(netdev);
-	struct net_device_stats *stats = rtl8152_get_stats(netdev);
-	unsigned long flags;
-	struct tx_agg *agg = NULL;
-	struct tx_desc *tx_desc;
-	unsigned int len;
-	u8 *tx_data;
-	int res;
 
 	skb_tx_timestamp(skb);
 
-	/* If tx_queue is not empty, it means at least one previous packt */
-	/* is waiting for sending. Don't send current one before it.      */
-	if (skb_queue_empty(&tp->tx_queue))
-		agg = r8152_get_tx_agg(tp);
-
-	if (!agg) {
-		skb_queue_tail(&tp->tx_queue, skb);
-		return NETDEV_TX_OK;
-	}
-
-	tx_desc = (struct tx_desc *)agg->head;
-	tx_data = agg->head + sizeof(*tx_desc);
-	agg->skb_num = agg->skb_len = 0;
+	skb_queue_tail(&tp->tx_queue, skb);
 
-	len = skb->len;
-	r8152_tx_csum(tp, tx_desc, skb);
-	memcpy(tx_data, skb->data, len);
-	dev_kfree_skb_any(skb);
-	agg->skb_num++;
-	agg->skb_len += len;
-	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
-			  agg->head, len + sizeof(*tx_desc),
-			  (usb_complete_t)write_bulk_callback, agg);
-	res = usb_submit_urb(agg->urb, GFP_ATOMIC);
-	if (res) {
-		/* Can we get/handle EPIPE here? */
-		if (res == -ENODEV) {
-			netif_device_detach(tp->netdev);
-		} else {
-			netif_warn(tp, tx_err, netdev,
-				   "failed tx_urb %d\n", res);
-			stats->tx_dropped++;
-			spin_lock_irqsave(&tp->tx_lock, flags);
-			list_add_tail(&agg->list, &tp->tx_free);
-			spin_unlock_irqrestore(&tp->tx_lock, flags);
-		}
-	}
+	if (!list_empty(&tp->tx_free))
+		tasklet_schedule(&tp->tl);
 
 	return NETDEV_TX_OK;
 }
-- 
1.8.3.1

[PATCH net v5 3/4] r8152: support stopping/waking tx queue

[Hayes Wang]

The maximum packet number which a tx aggregation buffer could contain
is the tx_qlen.

	tx_qlen = buffer size / (packet size + descriptor size).

If the tx buffer is empty and the queued packets are more than the
maximum value which is defined above, stop the tx queue. Wake the
tx queue if tx queue is stopped and the queued packets are less than
tx_qlen.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 22 ++++++++++++++++++++++
 1 file changed, 22 insertions(+)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index 8a786b6..f92e0cf 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -365,6 +365,7 @@ struct r8152 {
 	struct mii_if_info mii;
 	int intr_interval;
 	u32 msg_enable;
+	u32 tx_qlen;
 	u16 ocp_base;
 	u8 *intr_buff;
 	u8 version;
@@ -1173,6 +1174,14 @@ static int r8152_tx_agg_fill(struct r8152 *tp, struct tx_agg *agg)
 		remain = rx_buf_sz - (int)(tx_agg_align(tx_data) - agg->head);
 	}
 
+	netif_tx_lock(tp->netdev);
+
+	if (netif_queue_stopped(tp->netdev) &&
+	    skb_queue_len(&tp->tx_queue) < tp->tx_qlen)
+		netif_wake_queue(tp->netdev);
+
+	netif_tx_unlock(tp->netdev);
+
 	usb_fill_bulk_urb(agg->urb, tp->udev, usb_sndbulkpipe(tp->udev, 2),
 			  agg->head, (int)(tx_data - (u8 *)agg->head),
 			  (usb_complete_t)write_bulk_callback, agg);
@@ -1393,6 +1402,10 @@ static netdev_tx_t rtl8152_start_xmit(struct sk_buff *skb,
 
 	skb_queue_tail(&tp->tx_queue, skb);
 
+	if (list_empty(&tp->tx_free) &&
+	    skb_queue_len(&tp->tx_queue) > tp->tx_qlen)
+		netif_stop_queue(netdev);
+
 	if (!list_empty(&tp->tx_free))
 		tasklet_schedule(&tp->tl);
 
@@ -1423,6 +1436,14 @@ static void rtl8152_nic_reset(struct r8152 *tp)
 	}
 }
 
+static void set_tx_qlen(struct r8152 *tp)
+{
+	struct net_device *netdev = tp->netdev;
+
+	tp->tx_qlen = rx_buf_sz / (netdev->mtu + VLAN_ETH_HLEN + VLAN_HLEN +
+				   sizeof(struct tx_desc));
+}
+
 static inline u8 rtl8152_get_speed(struct r8152 *tp)
 {
 	return ocp_read_byte(tp, MCU_TYPE_PLA, PLA_PHYSTATUS);
@@ -1434,6 +1455,7 @@ static int rtl8152_enable(struct r8152 *tp)
 	int i, ret;
 	u8 speed;
 
+	set_tx_qlen(tp);
 	speed = rtl8152_get_speed(tp);
 	if (speed & _10bps) {
 		ocp_data = ocp_read_word(tp, MCU_TYPE_PLA, PLA_EEEP_CR);
-- 
1.8.3.1

[PATCH net v5 4/4] r8152: fix incorrect type in assignment

[Hayes Wang]

The data from the hardware should be little endian. Correct the
declaration.

Signed-off-by: Hayes Wang <hayeswang@realtek.com>
---
 drivers/net/usb/r8152.c | 18 +++++++++---------
 1 file changed, 9 insertions(+), 9 deletions(-)

diff --git a/drivers/net/usb/r8152.c b/drivers/net/usb/r8152.c
index f92e0cf..5107372 100644
--- a/drivers/net/usb/r8152.c
+++ b/drivers/net/usb/r8152.c
@@ -307,22 +307,22 @@ enum rtl8152_flags {
 #define MCU_TYPE_USB			0x0000
 
 struct rx_desc {
-	u32 opts1;
+	__le32 opts1;
 #define RX_LEN_MASK			0x7fff
-	u32 opts2;
-	u32 opts3;
-	u32 opts4;
-	u32 opts5;
-	u32 opts6;
+	__le32 opts2;
+	__le32 opts3;
+	__le32 opts4;
+	__le32 opts5;
+	__le32 opts6;
 };
 
 struct tx_desc {
-	u32 opts1;
+	__le32 opts1;
 #define TX_FS			(1 << 31) /* First segment of a packet */
 #define TX_LS			(1 << 30) /* Final segment of a packet */
 #define TX_LEN_MASK		0x3ffff
 
-	u32 opts2;
+	__le32 opts2;
 #define UDP_CS			(1 << 31) /* Calculate UDP/IP checksum */
 #define TCP_CS			(1 << 30) /* Calculate TCP/IP checksum */
 #define IPV4_CS			(1 << 29) /* Calculate IPv4 checksum */
@@ -877,7 +877,7 @@ static void write_bulk_callback(struct urb *urb)
 static void intr_callback(struct urb *urb)
 {
 	struct r8152 *tp;
-	__u16 *d;
+	__le16 *d;
 	int status = urb->status;
 	int res;
 
-- 
1.8.3.1

RE: [PATCH net v5 0/4] r8152 bug fixes

[hayeswang]

Any response? 

> -----Original Message-----
> From: Hayeswang [mailto:hayeswang@realtek.com] 
> Sent: Wednesday, November 20, 2013 5:31 PM
> To: netdev@vger.kernel.org
> Cc: nic_swsd; linux-kernel@vger.kernel.org; 
> linux-usb@vger.kernel.org; Hayeswang
> Subject: [PATCH net v5 0/4] r8152 bug fixes
> 
> For the patch #3, I add netif_tx_lock() before checking the
> netif_queue_stopped(). Besides, I add checking the skb queue
> length before waking the tx queue.
> 
> Hayes Wang (4):
>   r8152: fix tx/rx memory overflow
>   r8152: modify the tx flow
>   r8152: support stopping/waking tx queue
>   r8152: fix incorrect type in assignment
> 
>  drivers/net/usb/r8152.c | 114 
> +++++++++++++++++++++---------------------------
>  1 file changed, 50 insertions(+), 64 deletions(-)
> 
> -- 
> 1.8.3.1
> 
>