* [PATCH v2 1/8] phy: coding style fixes
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
@ 2014-01-05 0:17 ` Sergei Shtylyov
2014-01-05 0:18 ` [PATCH v2 2/8] mdio_bus: " Sergei Shtylyov
` (7 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:17 UTC (permalink / raw)
To: netdev
The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left
the numerous warnings:
- including <asm/io.h> instead of <linux/io.h>;
- including <asm/uaccess.h> instead of <linux/uaccess.h>;
- *extern* declaration in .c file;
- block comments using empty /* line;
- block comments not starting with * on the middle lines;
- block comments not having trailing */ on a separate line;
- EXPORT_SYMBOL() not immediately following its function;
- unnecessary {} for signle statement block;
- spaces before tabs.
While fixing these, also fix the following style issues (some of which were
found running 'checkpatch.pl --strict'):
- alignment not matching open paren;
- missing {} on one of the *if* arms where another has them;
- use of sizeof(struct structure) instead of sizeof(*variable);
- multiple assignments on one line;
- empty line before };
- file names in the heading comments;
- missing spaces around operators;
- no {} around multi-line *if* operator's arm;
- unneeded () around subexpressions;
- incomplete kernel-doc comment style;
- comment line exceeding 80 characters;
- missing empty line after declarations.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- removed mdio_bus_{init|exit}() declarations already present in <linux/phy.h>.
drivers/net/phy/phy.c | 82 ++++++++++-------------
drivers/net/phy/phy_device.c | 149 ++++++++++++++++++++++---------------------
2 files changed, 114 insertions(+), 117 deletions(-)
Index: net-next/drivers/net/phy/phy.c
===================================================================
--- net-next.orig/drivers/net/phy/phy.c
+++ net-next/drivers/net/phy/phy.c
@@ -1,7 +1,4 @@
-/*
- * drivers/net/phy/phy.c
- *
- * Framework for configuring and reading PHY devices
+/* Framework for configuring and reading PHY devices
* Based on code in sungem_phy.c and gianfar_phy.c
*
* Author: Andy Fleming
@@ -36,11 +33,11 @@
#include <linux/timer.h>
#include <linux/workqueue.h>
#include <linux/mdio.h>
-
+#include <linux/io.h>
+#include <linux/uaccess.h>
#include <linux/atomic.h>
-#include <asm/io.h>
+
#include <asm/irq.h>
-#include <asm/uaccess.h>
/**
* phy_print_status - Convenience function to print out the current phy status
@@ -48,13 +45,14 @@
*/
void phy_print_status(struct phy_device *phydev)
{
- if (phydev->link)
+ if (phydev->link) {
pr_info("%s - Link is Up - %d/%s\n",
dev_name(&phydev->dev),
phydev->speed,
DUPLEX_FULL == phydev->duplex ? "Full" : "Half");
- else
+ } else {
pr_info("%s - Link is Down\n", dev_name(&phydev->dev));
+ }
}
EXPORT_SYMBOL(phy_print_status);
@@ -114,7 +112,8 @@ static inline int phy_aneg_done(struct p
}
/* A structure for mapping a particular speed and duplex
- * combination to a particular SUPPORTED and ADVERTISED value */
+ * combination to a particular SUPPORTED and ADVERTISED value
+ */
struct phy_setting {
int speed;
int duplex;
@@ -177,8 +176,7 @@ static inline int phy_find_setting(int s
int idx = 0;
while (idx < ARRAY_SIZE(settings) &&
- (settings[idx].speed != speed ||
- settings[idx].duplex != duplex))
+ (settings[idx].speed != speed || settings[idx].duplex != duplex))
idx++;
return idx < MAX_NUM_SETTINGS ? idx : MAX_NUM_SETTINGS - 1;
@@ -245,8 +243,7 @@ int phy_ethtool_sset(struct phy_device *
if (cmd->phy_address != phydev->addr)
return -EINVAL;
- /* We make sure that we don't pass unsupported
- * values in to the PHY */
+ /* We make sure that we don't pass unsupported values in to the PHY */
cmd->advertising &= phydev->supported;
/* Verify the settings we care about. */
@@ -313,8 +310,7 @@ EXPORT_SYMBOL(phy_ethtool_gset);
* PHYCONTROL layer. It changes registers without regard to
* current state. Use at own risk.
*/
-int phy_mii_ioctl(struct phy_device *phydev,
- struct ifreq *ifr, int cmd)
+int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd)
{
struct mii_ioctl_data *mii_data = if_mii(ifr);
u16 val = mii_data->val_in;
@@ -334,19 +330,18 @@ int phy_mii_ioctl(struct phy_device *phy
if (mii_data->phy_id == phydev->addr) {
switch (mii_data->reg_num) {
case MII_BMCR:
- if ((val & (BMCR_RESET|BMCR_ANENABLE)) == 0)
+ if ((val & (BMCR_RESET | BMCR_ANENABLE)) == 0)
phydev->autoneg = AUTONEG_DISABLE;
else
phydev->autoneg = AUTONEG_ENABLE;
- if ((!phydev->autoneg) && (val & BMCR_FULLDPLX))
+ if (!phydev->autoneg && (val & BMCR_FULLDPLX))
phydev->duplex = DUPLEX_FULL;
else
phydev->duplex = DUPLEX_HALF;
- if ((!phydev->autoneg) &&
- (val & BMCR_SPEED1000))
+ if (!phydev->autoneg && (val & BMCR_SPEED1000))
phydev->speed = SPEED_1000;
- else if ((!phydev->autoneg) &&
- (val & BMCR_SPEED100))
+ else if (!phydev->autoneg &&
+ (val & BMCR_SPEED100))
phydev->speed = SPEED_100;
break;
case MII_ADVERTISE:
@@ -433,7 +428,7 @@ EXPORT_SYMBOL(phy_start_aneg);
* function.
*/
void phy_start_machine(struct phy_device *phydev,
- void (*handler)(struct net_device *))
+ void (*handler)(struct net_device *))
{
phydev->adjust_state = handler;
@@ -494,7 +489,8 @@ static irqreturn_t phy_interrupt(int irq
/* The MDIO bus is not allowed to be written in interrupt
* context, so we need to disable the irq here. A work
* queue will write the PHY to disable and clear the
- * interrupt, and then reenable the irq line. */
+ * interrupt, and then reenable the irq line.
+ */
disable_irq_nosync(irq);
atomic_inc(&phydev->irq_disable);
@@ -595,15 +591,13 @@ int phy_stop_interrupts(struct phy_devic
free_irq(phydev->irq, phydev);
- /*
- * Cannot call flush_scheduled_work() here as desired because
+ /* Cannot call flush_scheduled_work() here as desired because
* of rtnl_lock(), but we do not really care about what would
* be done, except from enable_irq(), so cancel any work
* possibly pending and take care of the matter below.
*/
cancel_work_sync(&phydev->phy_queue);
- /*
- * If work indeed has been cancelled, disable_irq() will have
+ /* If work indeed has been cancelled, disable_irq() will have
* been left unbalanced from phy_interrupt() and enable_irq()
* has to be called so that other devices on the line work.
*/
@@ -691,12 +685,12 @@ void phy_stop(struct phy_device *phydev)
out_unlock:
mutex_unlock(&phydev->lock);
- /*
- * Cannot call flush_scheduled_work() here as desired because
+ /* Cannot call flush_scheduled_work() here as desired because
* of rtnl_lock(), but PHY_HALTED shall guarantee phy_change()
* will not reenable interrupts.
*/
}
+EXPORT_SYMBOL(phy_stop);
/**
@@ -727,7 +721,6 @@ void phy_start(struct phy_device *phydev
}
mutex_unlock(&phydev->lock);
}
-EXPORT_SYMBOL(phy_stop);
EXPORT_SYMBOL(phy_start);
/**
@@ -765,8 +758,7 @@ void phy_state_machine(struct work_struc
if (err < 0)
break;
- /* If the link is down, give up on
- * negotiation for now */
+ /* If the link is down, give up on negotiation for now */
if (!phydev->link) {
phydev->state = PHY_NOLINK;
netif_carrier_off(phydev->attached_dev);
@@ -774,8 +766,7 @@ void phy_state_machine(struct work_struc
break;
}
- /* Check if negotiation is done. Break
- * if there's an error */
+ /* Check if negotiation is done. Break if there's an error */
err = phy_aneg_done(phydev);
if (err < 0)
break;
@@ -788,8 +779,7 @@ void phy_state_machine(struct work_struc
} else if (0 == phydev->link_timeout--) {
needs_aneg = 1;
- /* If we have the magic_aneg bit,
- * we try again */
+ /* If we have the magic_aneg bit, we try again */
if (phydev->drv->flags & PHY_HAS_MAGICANEG)
break;
}
@@ -847,7 +837,7 @@ void phy_state_machine(struct work_struc
if (phy_interrupt_is_valid(phydev))
err = phy_config_interrupt(phydev,
- PHY_INTERRUPT_ENABLED);
+ PHY_INTERRUPT_ENABLED);
break;
case PHY_HALTED:
if (phydev->link) {
@@ -864,8 +854,7 @@ void phy_state_machine(struct work_struc
if (err)
break;
- err = phy_config_interrupt(phydev,
- PHY_INTERRUPT_ENABLED);
+ err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
if (err)
break;
@@ -876,8 +865,8 @@ void phy_state_machine(struct work_struc
break;
/* err > 0 if AN is done.
- * Otherwise, it's 0, and we're
- * still waiting for AN */
+ * Otherwise, it's 0, and we're still waiting for AN
+ */
if (err > 0) {
err = phy_read_status(phydev);
if (err)
@@ -886,8 +875,9 @@ void phy_state_machine(struct work_struc
if (phydev->link) {
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
- } else
+ } else {
phydev->state = PHY_NOLINK;
+ }
phydev->adjust_link(phydev->attached_dev);
} else {
phydev->state = PHY_AN;
@@ -901,8 +891,9 @@ void phy_state_machine(struct work_struc
if (phydev->link) {
phydev->state = PHY_RUNNING;
netif_carrier_on(phydev->attached_dev);
- } else
+ } else {
phydev->state = PHY_NOLINK;
+ }
phydev->adjust_link(phydev->attached_dev);
}
break;
@@ -920,7 +911,7 @@ void phy_state_machine(struct work_struc
phy_error(phydev);
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue,
- PHY_STATE_TIME * HZ);
+ PHY_STATE_TIME * HZ);
}
void phy_mac_interrupt(struct phy_device *phydev, int new_link)
@@ -1091,7 +1082,6 @@ int phy_get_eee_err(struct phy_device *p
{
return phy_read_mmd_indirect(phydev->bus, MDIO_PCS_EEE_WK_ERR,
MDIO_MMD_PCS, phydev->addr);
-
}
EXPORT_SYMBOL(phy_get_eee_err);
Index: net-next/drivers/net/phy/phy_device.c
===================================================================
--- net-next.orig/drivers/net/phy/phy_device.c
+++ net-next/drivers/net/phy/phy_device.c
@@ -1,7 +1,4 @@
-/*
- * drivers/net/phy/phy_device.c
- *
- * Framework for finding and configuring PHYs.
+/* Framework for finding and configuring PHYs.
* Also contains generic PHY driver
*
* Author: Andy Fleming
@@ -33,10 +30,10 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/uaccess.h>
MODULE_DESCRIPTION("PHY library");
MODULE_AUTHOR("Andy Fleming");
@@ -54,8 +51,6 @@ static void phy_device_release(struct de
}
static struct phy_driver genphy_driver;
-extern int mdio_bus_init(void);
-extern void mdio_bus_exit(void);
static LIST_HEAD(phy_fixup_list);
static DEFINE_MUTEX(phy_fixup_lock);
@@ -63,21 +58,21 @@ static DEFINE_MUTEX(phy_fixup_lock);
static int phy_attach_direct(struct net_device *dev, struct phy_device *phydev,
u32 flags, phy_interface_t interface);
-/*
- * Creates a new phy_fixup and adds it to the list
+/**
+ * phy_register_fixup - creates a new phy_fixup and adds it to the list
* @bus_id: A string which matches phydev->dev.bus_id (or PHY_ANY_ID)
* @phy_uid: Used to match against phydev->phy_id (the UID of the PHY)
- * It can also be PHY_ANY_UID
+ * It can also be PHY_ANY_UID
* @phy_uid_mask: Applied to phydev->phy_id and fixup->phy_uid before
- * comparison
+ * comparison
* @run: The actual code to be run when a matching PHY is found
*/
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *))
+ int (*run)(struct phy_device *))
{
struct phy_fixup *fixup;
- fixup = kzalloc(sizeof(struct phy_fixup), GFP_KERNEL);
+ fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
if (!fixup)
return -ENOMEM;
@@ -96,7 +91,7 @@ EXPORT_SYMBOL(phy_register_fixup);
/* Registers a fixup to be run on any PHY with the UID in phy_uid */
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *))
+ int (*run)(struct phy_device *))
{
return phy_register_fixup(PHY_ANY_ID, phy_uid, phy_uid_mask, run);
}
@@ -104,14 +99,13 @@ EXPORT_SYMBOL(phy_register_fixup_for_uid
/* Registers a fixup to be run on the PHY with id string bus_id */
int phy_register_fixup_for_id(const char *bus_id,
- int (*run)(struct phy_device *))
+ int (*run)(struct phy_device *))
{
return phy_register_fixup(bus_id, PHY_ANY_UID, 0xffffffff, run);
}
EXPORT_SYMBOL(phy_register_fixup_for_id);
-/*
- * Returns 1 if fixup matches phydev in bus_id and phy_uid.
+/* Returns 1 if fixup matches phydev in bus_id and phy_uid.
* Fixups can be set to match any in one or more fields.
*/
static int phy_needs_fixup(struct phy_device *phydev, struct phy_fixup *fixup)
@@ -121,7 +115,7 @@ static int phy_needs_fixup(struct phy_de
return 0;
if ((fixup->phy_uid & fixup->phy_uid_mask) !=
- (phydev->phy_id & fixup->phy_uid_mask))
+ (phydev->phy_id & fixup->phy_uid_mask))
if (fixup->phy_uid != PHY_ANY_UID)
return 0;
@@ -153,12 +147,12 @@ int phy_scan_fixups(struct phy_device *p
EXPORT_SYMBOL(phy_scan_fixups);
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
- bool is_c45, struct phy_c45_device_ids *c45_ids)
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids)
{
struct phy_device *dev;
- /* We allocate the device, and initialize the
- * default values */
+ /* We allocate the device, and initialize the default values */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
if (NULL == dev)
@@ -168,7 +162,8 @@ struct phy_device *phy_device_create(str
dev->speed = 0;
dev->duplex = -1;
- dev->pause = dev->asym_pause = 0;
+ dev->pause = 0;
+ dev->asym_pause = 0;
dev->link = 1;
dev->interface = PHY_INTERFACE_MODE_GMII;
@@ -192,14 +187,15 @@ struct phy_device *phy_device_create(str
INIT_WORK(&dev->phy_queue, phy_change);
/* Request the appropriate module unconditionally; don't
- bother trying to do so only if it isn't already loaded,
- because that gets complicated. A hotplug event would have
- done an unconditional modprobe anyway.
- We don't do normal hotplug because it won't work for MDIO
- -- because it relies on the device staying around for long
- enough for the driver to get loaded. With MDIO, the NIC
- driver will get bored and give up as soon as it finds that
- there's no driver _already_ loaded. */
+ * bother trying to do so only if it isn't already loaded,
+ * because that gets complicated. A hotplug event would have
+ * done an unconditional modprobe anyway.
+ * We don't do normal hotplug because it won't work for MDIO
+ * -- because it relies on the device staying around for long
+ * enough for the driver to get loaded. With MDIO, the NIC
+ * driver will get bored and give up as soon as it finds that
+ * there's no driver _already_ loaded.
+ */
request_module(MDIO_MODULE_PREFIX MDIO_ID_FMT, MDIO_ID_ARGS(phy_id));
device_initialize(&dev->dev);
@@ -299,8 +295,7 @@ static int get_phy_id(struct mii_bus *bu
if (is_c45)
return get_phy_c45_ids(bus, addr, phy_id, c45_ids);
- /* Grab the bits from PHYIR1, and put them
- * in the upper half */
+ /* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
if (phy_reg < 0)
@@ -320,7 +315,8 @@ static int get_phy_id(struct mii_bus *bu
}
/**
- * get_phy_device - reads the specified PHY device and returns its @phy_device struct
+ * get_phy_device - reads the specified PHY device and returns its @phy_device
+ * struct
* @bus: the target MII bus
* @addr: PHY address on the MII bus
* @is_c45: If true the PHY uses the 802.3 clause 45 protocol
@@ -357,8 +353,7 @@ int phy_device_register(struct phy_devic
{
int err;
- /* Don't register a phy if one is already registered at this
- * address */
+ /* Don't register a phy if one is already registered at this address */
if (phydev->bus->phy_map[phydev->addr])
return -EINVAL;
phydev->bus->phy_map[phydev->addr] = phydev;
@@ -413,7 +408,7 @@ EXPORT_SYMBOL(phy_find_first);
* this function.
*/
static void phy_prepare_link(struct phy_device *phydev,
- void (*handler)(struct net_device *))
+ void (*handler)(struct net_device *))
{
phydev->adjust_link = handler;
}
@@ -460,15 +455,16 @@ EXPORT_SYMBOL(phy_connect_direct);
* the desired functionality.
*/
struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
- void (*handler)(struct net_device *),
- phy_interface_t interface)
+ void (*handler)(struct net_device *),
+ phy_interface_t interface)
{
struct phy_device *phydev;
struct device *d;
int rc;
/* Search the list of PHY devices on the mdio bus for the
- * PHY with the requested name */
+ * PHY with the requested name
+ */
d = bus_find_device_by_name(&mdio_bus_type, NULL, bus_id);
if (!d) {
pr_err("PHY %s not found\n", bus_id);
@@ -485,7 +481,8 @@ struct phy_device *phy_connect(struct ne
EXPORT_SYMBOL(phy_connect);
/**
- * phy_disconnect - disable interrupts, stop state machine, and detach a PHY device
+ * phy_disconnect - disable interrupts, stop state machine, and detach a PHY
+ * device
* @phydev: target phy_device struct
*/
void phy_disconnect(struct phy_device *phydev)
@@ -534,8 +531,7 @@ static int phy_poll_reset(struct phy_dev
if (ret & BMCR_RESET)
return -ETIMEDOUT;
- /*
- * Some chips (smsc911x) may still need up to another 1ms after the
+ /* Some chips (smsc911x) may still need up to another 1ms after the
* BMCR_RESET bit is cleared before they are usable.
*/
msleep(1);
@@ -586,7 +582,8 @@ static int phy_attach_direct(struct net_
int err;
/* Assume that if there is no driver, that it doesn't
- * exist, and we should use the genphy driver. */
+ * exist, and we should use the genphy driver.
+ */
if (NULL == d->driver) {
if (phydev->is_c45) {
pr_err("No driver for phy %x\n", phydev->phy_id);
@@ -619,7 +616,8 @@ static int phy_attach_direct(struct net_
/* Do initial configuration here, now that
* we have certain key parameters
- * (dev_flags and interface) */
+ * (dev_flags and interface)
+ */
err = phy_init_hw(phydev);
if (err)
phy_detach(phydev);
@@ -638,8 +636,8 @@ static int phy_attach_direct(struct net_
* Description: Same as phy_attach_direct() except that a PHY bus_id
* string is passed instead of a pointer to a struct phy_device.
*/
-struct phy_device *phy_attach(struct net_device *dev,
- const char *bus_id, phy_interface_t interface)
+struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
+ phy_interface_t interface)
{
struct bus_type *bus = &mdio_bus_type;
struct phy_device *phydev;
@@ -647,7 +645,8 @@ struct phy_device *phy_attach(struct net
int rc;
/* Search the list of PHY devices on the mdio bus for the
- * PHY with the requested name */
+ * PHY with the requested name
+ */
d = bus_find_device_by_name(bus, NULL, bus_id);
if (!d) {
pr_err("PHY %s not found\n", bus_id);
@@ -676,7 +675,8 @@ void phy_detach(struct phy_device *phyde
/* If the device had no specific driver before (i.e. - it
* was using the generic driver), we unbind the device
* from the generic driver so that there's a chance a
- * real driver could be loaded */
+ * real driver could be loaded
+ */
if (phydev->dev.driver == &genphy_driver.driver)
device_release_driver(&phydev->dev);
}
@@ -724,17 +724,17 @@ static int genphy_config_advert(struct p
int oldadv, adv;
int err, changed = 0;
- /* Only allow advertising what
- * this PHY supports */
+ /* Only allow advertising what this PHY supports */
phydev->advertising &= phydev->supported;
advertise = phydev->advertising;
/* Setup standard advertisement */
- oldadv = adv = phy_read(phydev, MII_ADVERTISE);
+ adv = phy_read(phydev, MII_ADVERTISE);
if (adv < 0)
return adv;
+ oldadv = adv;
adv &= ~(ADVERTISE_ALL | ADVERTISE_100BASE4 | ADVERTISE_PAUSE_CAP |
ADVERTISE_PAUSE_ASYM);
adv |= ethtool_adv_to_mii_adv_t(advertise);
@@ -749,12 +749,13 @@ static int genphy_config_advert(struct p
/* Configure gigabit if it's supported */
if (phydev->supported & (SUPPORTED_1000baseT_Half |
- SUPPORTED_1000baseT_Full)) {
- oldadv = adv = phy_read(phydev, MII_CTRL1000);
+ SUPPORTED_1000baseT_Full)) {
+ adv = phy_read(phydev, MII_CTRL1000);
if (adv < 0)
return adv;
+ oldadv = adv;
adv &= ~(ADVERTISE_1000FULL | ADVERTISE_1000HALF);
adv |= ethtool_adv_to_mii_ctrl1000_t(advertise);
@@ -783,7 +784,8 @@ int genphy_setup_forced(struct phy_devic
int err;
int ctl = 0;
- phydev->pause = phydev->asym_pause = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
if (SPEED_1000 == phydev->speed)
ctl |= BMCR_SPEED1000;
@@ -812,10 +814,10 @@ int genphy_restart_aneg(struct phy_devic
if (ctl < 0)
return ctl;
- ctl |= (BMCR_ANENABLE | BMCR_ANRESTART);
+ ctl |= BMCR_ANENABLE | BMCR_ANRESTART;
/* Don't isolate the PHY if we're negotiating */
- ctl &= ~(BMCR_ISOLATE);
+ ctl &= ~BMCR_ISOLATE;
ctl = phy_write(phydev, MII_BMCR, ctl);
@@ -846,7 +848,8 @@ int genphy_config_aneg(struct phy_device
if (result == 0) {
/* Advertisement hasn't changed, but maybe aneg was never on to
- * begin with? Or maybe phy was isolated? */
+ * begin with? Or maybe phy was isolated?
+ */
int ctl = phy_read(phydev, MII_BMCR);
if (ctl < 0)
@@ -857,7 +860,8 @@ int genphy_config_aneg(struct phy_device
}
/* Only restart aneg if we are advertising something different
- * than we were before. */
+ * than we were before.
+ */
if (result > 0)
result = genphy_restart_aneg(phydev);
@@ -914,8 +918,7 @@ int genphy_read_status(struct phy_device
int lpa;
int lpagb = 0;
- /* Update the link, but return if there
- * was an error */
+ /* Update the link, but return if there was an error */
err = genphy_update_link(phydev);
if (err)
return err;
@@ -956,7 +959,8 @@ int genphy_read_status(struct phy_device
phydev->speed = SPEED_10;
phydev->duplex = DUPLEX_HALF;
- phydev->pause = phydev->asym_pause = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
if (lpagb & (LPA_1000FULL | LPA_1000HALF)) {
phydev->speed = SPEED_1000;
@@ -978,6 +982,7 @@ int genphy_read_status(struct phy_device
}
} else {
int bmcr = phy_read(phydev, MII_BMCR);
+
if (bmcr < 0)
return bmcr;
@@ -993,7 +998,8 @@ int genphy_read_status(struct phy_device
else
phydev->speed = SPEED_10;
- phydev->pause = phydev->asym_pause = 0;
+ phydev->pause = 0;
+ phydev->asym_pause = 0;
}
return 0;
@@ -1006,7 +1012,8 @@ static int genphy_config_init(struct phy
u32 features;
/* For now, I'll claim that the generic driver supports
- * all possible port types */
+ * all possible port types
+ */
features = (SUPPORTED_TP | SUPPORTED_MII
| SUPPORTED_AUI | SUPPORTED_FIBRE |
SUPPORTED_BNC);
@@ -1053,7 +1060,7 @@ int genphy_suspend(struct phy_device *ph
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
- phy_write(phydev, MII_BMCR, (value | BMCR_PDOWN));
+ phy_write(phydev, MII_BMCR, value | BMCR_PDOWN);
mutex_unlock(&phydev->lock);
@@ -1068,7 +1075,7 @@ int genphy_resume(struct phy_device *phy
mutex_lock(&phydev->lock);
value = phy_read(phydev, MII_BMCR);
- phy_write(phydev, MII_BMCR, (value & ~BMCR_PDOWN));
+ phy_write(phydev, MII_BMCR, value & ~BMCR_PDOWN);
mutex_unlock(&phydev->lock);
@@ -1101,7 +1108,7 @@ static int phy_probe(struct device *dev)
* but the interrupt is still a valid one
*/
if (!(phydrv->flags & PHY_HAS_INTERRUPT) &&
- phy_interrupt_is_valid(phydev))
+ phy_interrupt_is_valid(phydev))
phydev->irq = PHY_POLL;
if (phydrv->flags & PHY_IS_INTERNAL)
@@ -1111,7 +1118,8 @@ static int phy_probe(struct device *dev)
/* Start out supporting everything. Eventually,
* a controller will attach, and may modify one
- * or both of these values */
+ * or both of these values
+ */
phydev->supported = phydrv->features;
phydev->advertising = phydrv->features;
@@ -1124,7 +1132,6 @@ static int phy_probe(struct device *dev)
mutex_unlock(&phydev->lock);
return err;
-
}
static int phy_remove(struct device *dev)
@@ -1197,9 +1204,9 @@ EXPORT_SYMBOL(phy_driver_unregister);
void phy_drivers_unregister(struct phy_driver *drv, int n)
{
int i;
- for (i = 0; i < n; i++) {
+
+ for (i = 0; i < n; i++)
phy_driver_unregister(drv + i);
- }
}
EXPORT_SYMBOL(phy_drivers_unregister);
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 2/8] mdio_bus: coding style fixes
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
2014-01-05 0:17 ` [PATCH v2 1/8] phy: coding style fixes Sergei Shtylyov
@ 2014-01-05 0:18 ` Sergei Shtylyov
2014-01-05 0:20 ` [PATCH v2 3/8] <linux/phy.h>: " Sergei Shtylyov
` (6 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:18 UTC (permalink / raw)
To: netdev
The recent patch from Florian Fainelli fixed all 'checkpatch.pl' errors but left
some warnings like:
- including <asm/io.h> instead of <linux/io.h>;
- including <asm/uaccess.h> instead of <linux/uaccess.h>;
- block comments using empty /* line;
- 'struct dev_pm_ops' variable not being *const*.
While fixing these, also fix the following style issues (some of which were
found running 'checkpatch.pl --strict'):
- alignment not matching open paren;
- file name in the heading comment.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
drivers/net/phy/mdio_bus.c | 27 +++++++++------------------
1 file changed, 9 insertions(+), 18 deletions(-)
Index: net-next/drivers/net/phy/mdio_bus.c
===================================================================
--- net-next.orig/drivers/net/phy/mdio_bus.c
+++ net-next/drivers/net/phy/mdio_bus.c
@@ -1,7 +1,4 @@
-/*
- * drivers/net/phy/mdio_bus.c
- *
- * MDIO Bus interface
+/* MDIO Bus interface
*
* Author: Andy Fleming
*
@@ -36,10 +33,10 @@
#include <linux/mii.h>
#include <linux/ethtool.h>
#include <linux/phy.h>
+#include <linux/io.h>
+#include <linux/uaccess.h>
-#include <asm/io.h>
#include <asm/irq.h>
-#include <asm/uaccess.h>
/**
* mdiobus_alloc_size - allocate a mii_bus structure
@@ -139,8 +136,7 @@ int mdiobus_register(struct mii_bus *bus
int i, err;
if (NULL == bus || NULL == bus->name ||
- NULL == bus->read ||
- NULL == bus->write)
+ NULL == bus->read || NULL == bus->write)
return -EINVAL;
BUG_ON(bus->state != MDIOBUS_ALLOCATED &&
@@ -214,9 +210,7 @@ EXPORT_SYMBOL(mdiobus_unregister);
*/
void mdiobus_free(struct mii_bus *bus)
{
- /*
- * For compatibility with error handling in drivers.
- */
+ /* For compatibility with error handling in drivers. */
if (bus->state == MDIOBUS_ALLOCATED) {
kfree(bus);
return;
@@ -335,15 +329,13 @@ static bool mdio_bus_phy_may_suspend(str
if (!netdev)
return true;
- /*
- * Don't suspend PHY if the attched netdev parent may wakeup.
+ /* Don't suspend PHY if the attched netdev parent may wakeup.
* The parent may point to a PCI device, as in tg3 driver.
*/
if (netdev->dev.parent && device_may_wakeup(netdev->dev.parent))
return false;
- /*
- * Also don't suspend PHY if the netdev itself may wakeup. This
+ /* Also don't suspend PHY if the netdev itself may wakeup. This
* is the case for devices w/o underlaying pwr. mgmt. aware bus,
* e.g. SoC devices.
*/
@@ -358,8 +350,7 @@ static int mdio_bus_suspend(struct devic
struct phy_driver *phydrv = to_phy_driver(dev->driver);
struct phy_device *phydev = to_phy_device(dev);
- /*
- * We must stop the state machine manually, otherwise it stops out of
+ /* We must stop the state machine manually, otherwise it stops out of
* control, possibly with the phydev->lock held. Upon resume, netdev
* may call phy routines that try to grab the same lock, and that may
* lead to a deadlock.
@@ -415,7 +406,7 @@ static int mdio_bus_restore(struct devic
return 0;
}
-static struct dev_pm_ops mdio_bus_pm_ops = {
+static const struct dev_pm_ops mdio_bus_pm_ops = {
.suspend = mdio_bus_suspend,
.resume = mdio_bus_resume,
.freeze = mdio_bus_suspend,
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 3/8] <linux/phy.h>: coding style fixes
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
2014-01-05 0:17 ` [PATCH v2 1/8] phy: coding style fixes Sergei Shtylyov
2014-01-05 0:18 ` [PATCH v2 2/8] mdio_bus: " Sergei Shtylyov
@ 2014-01-05 0:20 ` Sergei Shtylyov
2014-01-05 0:21 ` [PATCH v2 4/8] phy: kill useless local variables Sergei Shtylyov
` (5 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:20 UTC (permalink / raw)
To: netdev
Running 'checkpatch.pl' gives some errors and warnings:
- no spaces around =;
- * separated by space from the function name;
- { in function definition not on a separate line;
- line over 80 characters.
While fixing these, also fix the following style issues:
- file name in the heading comment;
- alignment not matching open paren.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- new patch in this series.
include/linux/phy.h | 38 +++++++++++++++++++-------------------
1 file changed, 19 insertions(+), 19 deletions(-)
Index: net-next/include/linux/phy.h
===================================================================
--- net-next.orig/include/linux/phy.h
+++ net-next/include/linux/phy.h
@@ -1,6 +1,4 @@
/*
- * include/linux/phy.h
- *
* Framework and drivers for configuring and reading different PHYs
* Based on code in sungem_phy.c and gianfar_phy.c
*
@@ -240,7 +238,7 @@ int mdiobus_write(struct mii_bus *bus, i
* - phy_stop moves to HALTED
*/
enum phy_state {
- PHY_DOWN=0,
+ PHY_DOWN = 0,
PHY_STARTING,
PHY_READY,
PHY_PENDING,
@@ -544,21 +542,22 @@ static inline bool phy_is_internal(struc
}
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
- bool is_c45, struct phy_c45_device_ids *c45_ids);
+ bool is_c45,
+ struct phy_c45_device_ids *c45_ids);
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45);
int phy_device_register(struct phy_device *phy);
int phy_init_hw(struct phy_device *phydev);
int phy_suspend(struct phy_device *phydev);
int phy_resume(struct phy_device *phydev);
-struct phy_device * phy_attach(struct net_device *dev,
- const char *bus_id, phy_interface_t interface);
+struct phy_device *phy_attach(struct net_device *dev, const char *bus_id,
+ phy_interface_t interface);
struct phy_device *phy_find_first(struct mii_bus *bus);
int phy_connect_direct(struct net_device *dev, struct phy_device *phydev,
- void (*handler)(struct net_device *),
- phy_interface_t interface);
-struct phy_device * phy_connect(struct net_device *dev, const char *bus_id,
- void (*handler)(struct net_device *),
- phy_interface_t interface);
+ void (*handler)(struct net_device *),
+ phy_interface_t interface);
+struct phy_device *phy_connect(struct net_device *dev, const char *bus_id,
+ void (*handler)(struct net_device *),
+ phy_interface_t interface);
void phy_disconnect(struct phy_device *phydev);
void phy_detach(struct phy_device *phydev);
void phy_start(struct phy_device *phydev);
@@ -567,7 +566,8 @@ int phy_start_aneg(struct phy_device *ph
int phy_stop_interrupts(struct phy_device *phydev);
-static inline int phy_read_status(struct phy_device *phydev) {
+static inline int phy_read_status(struct phy_device *phydev)
+{
return phydev->drv->read_status(phydev);
}
@@ -586,22 +586,21 @@ void phy_state_machine(struct work_struc
void phy_change(struct work_struct *work);
void phy_mac_interrupt(struct phy_device *phydev, int new_link);
void phy_start_machine(struct phy_device *phydev,
- void (*handler)(struct net_device *));
+ void (*handler)(struct net_device *));
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
-int phy_mii_ioctl(struct phy_device *phydev,
- struct ifreq *ifr, int cmd);
+int phy_mii_ioctl(struct phy_device *phydev, struct ifreq *ifr, int cmd);
int phy_start_interrupts(struct phy_device *phydev);
void phy_print_status(struct phy_device *phydev);
void phy_device_free(struct phy_device *phydev);
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *));
+ int (*run)(struct phy_device *));
int phy_register_fixup_for_id(const char *bus_id,
- int (*run)(struct phy_device *));
+ int (*run)(struct phy_device *));
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
- int (*run)(struct phy_device *));
+ int (*run)(struct phy_device *));
int phy_scan_fixups(struct phy_device *phydev);
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
@@ -609,7 +608,8 @@ int phy_get_eee_err(struct phy_device *p
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data);
int phy_ethtool_get_eee(struct phy_device *phydev, struct ethtool_eee *data);
int phy_ethtool_set_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
-void phy_ethtool_get_wol(struct phy_device *phydev, struct ethtool_wolinfo *wol);
+void phy_ethtool_get_wol(struct phy_device *phydev,
+ struct ethtool_wolinfo *wol);
int __init mdio_bus_init(void);
void mdio_bus_exit(void);
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 4/8] phy: kill useless local variables
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
` (2 preceding siblings ...)
2014-01-05 0:20 ` [PATCH v2 3/8] <linux/phy.h>: " Sergei Shtylyov
@ 2014-01-05 0:21 ` Sergei Shtylyov
2014-01-05 4:55 ` Joe Perches
2014-01-05 0:23 ` [PATCH v2 5/8] phy: kill excess code Sergei Shtylyov
` (4 subsequent siblings)
8 siblings, 1 reply; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:21 UTC (permalink / raw)
To: netdev
A number of functions (especially in phy.c) has local variables that were hardly
needed in the first place -- remove them.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- refreshed the patch.
drivers/net/phy/phy.c | 55 ++++++++++++-------------------------------
drivers/net/phy/phy_device.c | 10 +------
2 files changed, 18 insertions(+), 47 deletions(-)
Index: net-next/drivers/net/phy/phy.c
===================================================================
--- net-next.orig/drivers/net/phy/phy.c
+++ net-next/drivers/net/phy/phy.c
@@ -67,12 +67,10 @@ EXPORT_SYMBOL(phy_print_status);
*/
static int phy_clear_interrupt(struct phy_device *phydev)
{
- int err = 0;
-
if (phydev->drv->ack_interrupt)
- err = phydev->drv->ack_interrupt(phydev);
+ return phydev->drv->ack_interrupt(phydev);
- return err;
+ return 0;
}
/**
@@ -84,13 +82,11 @@ static int phy_clear_interrupt(struct ph
*/
static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
{
- int err = 0;
-
phydev->interrupts = interrupts;
if (phydev->drv->config_intr)
- err = phydev->drv->config_intr(phydev);
+ return phydev->drv->config_intr(phydev);
- return err;
+ return 0;
}
@@ -314,7 +310,6 @@ int phy_mii_ioctl(struct phy_device *phy
{
struct mii_ioctl_data *mii_data = if_mii(ifr);
u16 val = mii_data->val_in;
- int ret = 0;
switch (cmd) {
case SIOCGMIIPHY:
@@ -324,7 +319,7 @@ int phy_mii_ioctl(struct phy_device *phy
case SIOCGMIIREG:
mii_data->val_out = mdiobus_read(phydev->bus, mii_data->phy_id,
mii_data->reg_num);
- break;
+ return 0;
case SIOCSMIIREG:
if (mii_data->phy_id == phydev->addr) {
@@ -358,8 +353,8 @@ int phy_mii_ioctl(struct phy_device *phy
if (mii_data->reg_num == MII_BMCR &&
val & BMCR_RESET)
- ret = phy_init_hw(phydev);
- break;
+ return phy_init_hw(phydev);
+ return 0;
case SIOCSHWTSTAMP:
if (phydev->drv->hwtstamp)
@@ -369,8 +364,6 @@ int phy_mii_ioctl(struct phy_device *phy
default:
return -EOPNOTSUPP;
}
-
- return ret;
}
EXPORT_SYMBOL(phy_mii_ioctl);
@@ -557,8 +550,6 @@ phy_err:
*/
int phy_start_interrupts(struct phy_device *phydev)
{
- int err = 0;
-
atomic_set(&phydev->irq_disable, 0);
if (request_irq(phydev->irq, phy_interrupt,
IRQF_SHARED,
@@ -570,9 +561,7 @@ int phy_start_interrupts(struct phy_devi
return 0;
}
- err = phy_enable_interrupts(phydev);
-
- return err;
+ return phy_enable_interrupts(phydev);
}
EXPORT_SYMBOL(phy_start_interrupts);
@@ -615,7 +604,6 @@ EXPORT_SYMBOL(phy_stop_interrupts);
*/
void phy_change(struct work_struct *work)
{
- int err;
struct phy_device *phydev =
container_of(work, struct phy_device, phy_queue);
@@ -623,9 +611,7 @@ void phy_change(struct work_struct *work
!phydev->drv->did_interrupt(phydev))
goto ignore;
- err = phy_disable_interrupts(phydev);
-
- if (err)
+ if (phy_disable_interrupts(phydev))
goto phy_err;
mutex_lock(&phydev->lock);
@@ -637,10 +623,8 @@ void phy_change(struct work_struct *work
enable_irq(phydev->irq);
/* Reenable interrupts */
- if (PHY_HALTED != phydev->state)
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
- if (err)
+ if (PHY_HALTED != phydev->state &&
+ phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED))
goto irq_enable_err;
/* reschedule state queue work to run as soon as possible */
@@ -953,14 +937,10 @@ static inline void mmd_phy_indirect(stru
static int phy_read_mmd_indirect(struct mii_bus *bus, int prtad, int devad,
int addr)
{
- u32 ret;
-
mmd_phy_indirect(bus, prtad, devad, addr);
/* Read the content of the MMD's selected register */
- ret = bus->read(bus, addr, MII_MMD_DATA);
-
- return ret;
+ return bus->read(bus, addr, MII_MMD_DATA);
}
/**
@@ -1000,8 +980,6 @@ static void phy_write_mmd_indirect(struc
*/
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable)
{
- int ret = -EPROTONOSUPPORT;
-
/* According to 802.3az,the EEE is supported only in full duplex-mode.
* Also EEE feature is active when core is operating with MII, GMII
* or RGMII.
@@ -1027,7 +1005,7 @@ int phy_init_eee(struct phy_device *phyd
cap = mmd_eee_cap_to_ethtool_sup_t(eee_cap);
if (!cap)
- goto eee_exit;
+ return -EPROTONOSUPPORT;
/* Check which link settings negotiated and verify it in
* the EEE advertising registers.
@@ -1046,7 +1024,7 @@ int phy_init_eee(struct phy_device *phyd
lp = mmd_eee_adv_to_ethtool_adv_t(eee_lp);
idx = phy_find_setting(phydev->speed, phydev->duplex);
if (!(lp & adv & settings[idx].setting))
- goto eee_exit;
+ return -EPROTONOSUPPORT;
if (clk_stop_enable) {
/* Configure the PHY to stop receiving xMII
@@ -1063,11 +1041,10 @@ int phy_init_eee(struct phy_device *phyd
MDIO_MMD_PCS, phydev->addr, val);
}
- ret = 0; /* EEE supported */
+ return 0; /* EEE supported */
}
-eee_exit:
- return ret;
+ return -EPROTONOSUPPORT;
}
EXPORT_SYMBOL(phy_init_eee);
Index: net-next/drivers/net/phy/phy_device.c
===================================================================
--- net-next.orig/drivers/net/phy/phy_device.c
+++ net-next/drivers/net/phy/phy_device.c
@@ -327,7 +327,6 @@ static int get_phy_id(struct mii_bus *bu
struct phy_device *get_phy_device(struct mii_bus *bus, int addr, bool is_c45)
{
struct phy_c45_device_ids c45_ids = {0};
- struct phy_device *dev = NULL;
u32 phy_id = 0;
int r;
@@ -339,9 +338,7 @@ struct phy_device *get_phy_device(struct
if ((phy_id & 0x1fffffff) == 0x1fffffff)
return NULL;
- dev = phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
-
- return dev;
+ return phy_device_create(bus, addr, phy_id, is_c45, &c45_ids);
}
EXPORT_SYMBOL(get_phy_device);
@@ -781,7 +778,6 @@ static int genphy_config_advert(struct p
*/
int genphy_setup_forced(struct phy_device *phydev)
{
- int err;
int ctl = 0;
phydev->pause = 0;
@@ -795,9 +791,7 @@ int genphy_setup_forced(struct phy_devic
if (DUPLEX_FULL == phydev->duplex)
ctl |= BMCR_FULLDPLX;
- err = phy_write(phydev, MII_BMCR, ctl);
-
- return err;
+ return phy_write(phydev, MII_BMCR, ctl);
}
EXPORT_SYMBOL(genphy_setup_forced);
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v2 4/8] phy: kill useless local variables
2014-01-05 0:21 ` [PATCH v2 4/8] phy: kill useless local variables Sergei Shtylyov
@ 2014-01-05 4:55 ` Joe Perches
0 siblings, 0 replies; 11+ messages in thread
From: Joe Perches @ 2014-01-05 4:55 UTC (permalink / raw)
To: Sergei Shtylyov; +Cc: netdev
On Sun, 2014-01-05 at 03:21 +0300, Sergei Shtylyov wrote:
> A number of functions (especially in phy.c) has local variables that were hardly
> needed in the first place -- remove them.
[]
> +++ net-next/drivers/net/phy/phy.c
> @@ -67,12 +67,10 @@ EXPORT_SYMBOL(phy_print_status);
> */
> static int phy_clear_interrupt(struct phy_device *phydev)
> {
> - int err = 0;
> -
> if (phydev->drv->ack_interrupt)
> - err = phydev->drv->ack_interrupt(phydev);
> + return phydev->drv->ack_interrupt(phydev);
>
> - return err;
> + return 0;
> }
My preference for this sort of conversion would be to
make the generic return at the bottom of the block like:
static int phy_clear_interrupt(struct phy_device *phydev)
{
if (!phydev->drv->ack_interrupt)
return 0;
return phydev->drv->ack_interrupt(phydev);
}
> @@ -84,13 +82,11 @@ static int phy_clear_interrupt(struct ph
> */
> static int phy_config_interrupt(struct phy_device *phydev, u32 interrupts)
> {
> - int err = 0;
> -
> phydev->interrupts = interrupts;
> if (phydev->drv->config_intr)
> - err = phydev->drv->config_intr(phydev);
> + return phydev->drv->config_intr(phydev);
>
> - return err;
> + return 0;
> }
etc..,
^ permalink raw reply [flat|nested] 11+ messages in thread
* [PATCH v2 5/8] phy: kill excess code
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
` (3 preceding siblings ...)
2014-01-05 0:21 ` [PATCH v2 4/8] phy: kill useless local variables Sergei Shtylyov
@ 2014-01-05 0:23 ` Sergei Shtylyov
2014-01-05 0:24 ` [PATCH v2 6/8] phy: kill excess empty lines Sergei Shtylyov
` (3 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:23 UTC (permalink / raw)
To: netdev
Remove some excess code:
- convert assignments to initializers;
- kill useless assignments before *return*.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- split removal of empty lines into a new patch.
drivers/net/phy/phy.c | 19 +++++--------------
drivers/net/phy/phy_device.c | 29 ++++++++---------------------
2 files changed, 13 insertions(+), 35 deletions(-)
Index: net-next/drivers/net/phy/phy.c
===================================================================
--- net-next.orig/drivers/net/phy/phy.c
+++ net-next/drivers/net/phy/phy.c
@@ -100,9 +100,7 @@ static int phy_config_interrupt(struct p
*/
static inline int phy_aneg_done(struct phy_device *phydev)
{
- int retval;
-
- retval = phy_read(phydev, MII_BMSR);
+ int retval = phy_read(phydev, MII_BMSR);
return (retval < 0) ? retval : (retval & BMSR_ANEGCOMPLETE);
}
@@ -498,16 +496,12 @@ static irqreturn_t phy_interrupt(int irq
*/
static int phy_enable_interrupts(struct phy_device *phydev)
{
- int err;
-
- err = phy_clear_interrupt(phydev);
+ int err = phy_clear_interrupt(phydev);
if (err < 0)
return err;
- err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
- return err;
+ return phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
}
/**
@@ -571,9 +565,7 @@ EXPORT_SYMBOL(phy_start_interrupts);
*/
int phy_stop_interrupts(struct phy_device *phydev)
{
- int err;
-
- err = phy_disable_interrupts(phydev);
+ int err = phy_disable_interrupts(phydev);
if (err)
phy_error(phydev);
@@ -1108,9 +1100,8 @@ EXPORT_SYMBOL(phy_ethtool_get_eee);
*/
int phy_ethtool_set_eee(struct phy_device *phydev, struct ethtool_eee *data)
{
- int val;
+ int val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
- val = ethtool_adv_to_mmd_eee_adv_t(data->advertised);
phy_write_mmd_indirect(phydev->bus, MDIO_AN_EEE_ADV, MDIO_MMD_AN,
phydev->addr, val);
Index: net-next/drivers/net/phy/phy_device.c
===================================================================
--- net-next.orig/drivers/net/phy/phy_device.c
+++ net-next/drivers/net/phy/phy_device.c
@@ -70,9 +70,8 @@ static int phy_attach_direct(struct net_
int phy_register_fixup(const char *bus_id, u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *))
{
- struct phy_fixup *fixup;
+ struct phy_fixup *fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
- fixup = kzalloc(sizeof(*fixup), GFP_KERNEL);
if (!fixup)
return -ENOMEM;
@@ -130,9 +129,7 @@ int phy_scan_fixups(struct phy_device *p
mutex_lock(&phy_fixup_lock);
list_for_each_entry(fixup, &phy_fixup_list, list) {
if (phy_needs_fixup(phydev, fixup)) {
- int err;
-
- err = fixup->run(phydev);
+ int err = fixup->run(phydev);
if (err < 0) {
mutex_unlock(&phy_fixup_lock);
@@ -801,9 +798,7 @@ EXPORT_SYMBOL(genphy_setup_forced);
*/
int genphy_restart_aneg(struct phy_device *phydev)
{
- int ctl;
-
- ctl = phy_read(phydev, MII_BMCR);
+ int ctl = phy_read(phydev, MII_BMCR);
if (ctl < 0)
return ctl;
@@ -813,9 +808,7 @@ int genphy_restart_aneg(struct phy_devic
/* Don't isolate the PHY if we're negotiating */
ctl &= ~BMCR_ISOLATE;
- ctl = phy_write(phydev, MII_BMCR, ctl);
-
- return ctl;
+ return phy_write(phydev, MII_BMCR, ctl);
}
EXPORT_SYMBOL(genphy_restart_aneg);
@@ -1087,15 +1080,11 @@ EXPORT_SYMBOL(genphy_resume);
*/
static int phy_probe(struct device *dev)
{
- struct phy_device *phydev;
- struct phy_driver *phydrv;
- struct device_driver *drv;
+ struct phy_device *phydev = to_phy_device(dev);
+ struct device_driver *drv = phydev->dev.driver;
+ struct phy_driver *phydrv = to_phy_driver(drv);
int err = 0;
- phydev = to_phy_device(dev);
-
- drv = phydev->dev.driver;
- phydrv = to_phy_driver(drv);
phydev->drv = phydrv;
/* Disable the interrupt if the PHY doesn't support it
@@ -1130,9 +1119,7 @@ static int phy_probe(struct device *dev)
static int phy_remove(struct device *dev)
{
- struct phy_device *phydev;
-
- phydev = to_phy_device(dev);
+ struct phy_device *phydev = to_phy_device(dev);
mutex_lock(&phydev->lock);
phydev->state = PHY_DOWN;
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 6/8] phy: kill excess empty lines
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
` (4 preceding siblings ...)
2014-01-05 0:23 ` [PATCH v2 5/8] phy: kill excess code Sergei Shtylyov
@ 2014-01-05 0:24 ` Sergei Shtylyov
2014-01-05 0:27 ` [PATCH v2 7/8] phylib: remove unused adjust_state() callback Sergei Shtylyov
` (2 subsequent siblings)
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:24 UTC (permalink / raw)
To: netdev
Remove excess empty lines such as those between a function call and its result
check and just duplicate ones between functions.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- split from the previous patch in series;
- killed 2 lines in phy_disable_interrupts().
drivers/net/phy/phy.c | 14 --------------
drivers/net/phy/phy_device.c | 17 -----------------
2 files changed, 31 deletions(-)
Index: net-next/drivers/net/phy/phy.c
===================================================================
--- net-next.orig/drivers/net/phy/phy.c
+++ net-next/drivers/net/phy/phy.c
@@ -384,7 +384,6 @@ int phy_start_aneg(struct phy_device *ph
phy_sanitize_settings(phydev);
err = phydev->drv->config_aneg(phydev);
-
if (err < 0)
goto out_unlock;
@@ -404,7 +403,6 @@ out_unlock:
}
EXPORT_SYMBOL(phy_start_aneg);
-
/**
* phy_start_machine - start PHY state machine tracking
* @phydev: the phy_device struct
@@ -514,13 +512,11 @@ static int phy_disable_interrupts(struct
/* Disable PHY interrupts */
err = phy_config_interrupt(phydev, PHY_INTERRUPT_DISABLED);
-
if (err)
goto phy_err;
/* Clear the interrupt */
err = phy_clear_interrupt(phydev);
-
if (err)
goto phy_err;
@@ -589,7 +585,6 @@ int phy_stop_interrupts(struct phy_devic
}
EXPORT_SYMBOL(phy_stop_interrupts);
-
/**
* phy_change - Scheduled by the phy_interrupt/timer to handle PHY changes
* @work: work_struct that describes the work to be done
@@ -622,7 +617,6 @@ void phy_change(struct work_struct *work
/* reschedule state queue work to run as soon as possible */
cancel_delayed_work_sync(&phydev->state_queue);
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, 0);
-
return;
ignore:
@@ -668,7 +662,6 @@ out_unlock:
}
EXPORT_SYMBOL(phy_stop);
-
/**
* phy_start - start or restart a PHY device
* @phydev: target phy_device struct
@@ -730,7 +723,6 @@ void phy_state_machine(struct work_struc
break;
case PHY_AN:
err = phy_read_status(phydev);
-
if (err < 0)
break;
@@ -762,7 +754,6 @@ void phy_state_machine(struct work_struc
break;
case PHY_NOLINK:
err = phy_read_status(phydev);
-
if (err)
break;
@@ -774,7 +765,6 @@ void phy_state_machine(struct work_struc
break;
case PHY_FORCING:
err = genphy_update_link(phydev);
-
if (err)
break;
@@ -797,7 +787,6 @@ void phy_state_machine(struct work_struc
break;
case PHY_CHANGELINK:
err = phy_read_status(phydev);
-
if (err)
break;
@@ -824,14 +813,11 @@ void phy_state_machine(struct work_struc
}
break;
case PHY_RESUMING:
-
err = phy_clear_interrupt(phydev);
-
if (err)
break;
err = phy_config_interrupt(phydev, PHY_INTERRUPT_ENABLED);
-
if (err)
break;
Index: net-next/drivers/net/phy/phy_device.c
===================================================================
--- net-next.orig/drivers/net/phy/phy_device.c
+++ net-next/drivers/net/phy/phy_device.c
@@ -151,7 +151,6 @@ struct phy_device *phy_device_create(str
/* We allocate the device, and initialize the default values */
dev = kzalloc(sizeof(*dev), GFP_KERNEL);
-
if (NULL == dev)
return (struct phy_device *)PTR_ERR((void *)-ENOMEM);
@@ -294,7 +293,6 @@ static int get_phy_id(struct mii_bus *bu
/* Grab the bits from PHYIR1, and put them in the upper half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID1);
-
if (phy_reg < 0)
return -EIO;
@@ -302,7 +300,6 @@ static int get_phy_id(struct mii_bus *bu
/* Grab the bits from PHYIR2, and put them in the lower half */
phy_reg = mdiobus_read(bus, addr, MII_PHYSID2);
-
if (phy_reg < 0)
return -EIO;
@@ -724,7 +721,6 @@ static int genphy_config_advert(struct p
/* Setup standard advertisement */
adv = phy_read(phydev, MII_ADVERTISE);
-
if (adv < 0)
return adv;
@@ -745,7 +741,6 @@ static int genphy_config_advert(struct p
if (phydev->supported & (SUPPORTED_1000baseT_Half |
SUPPORTED_1000baseT_Full)) {
adv = phy_read(phydev, MII_CTRL1000);
-
if (adv < 0)
return adv;
@@ -812,7 +807,6 @@ int genphy_restart_aneg(struct phy_devic
}
EXPORT_SYMBOL(genphy_restart_aneg);
-
/**
* genphy_config_aneg - restart auto-negotiation or write BMCR
* @phydev: target phy_device struct
@@ -829,10 +823,8 @@ int genphy_config_aneg(struct phy_device
return genphy_setup_forced(phydev);
result = genphy_config_advert(phydev);
-
if (result < 0) /* error */
return result;
-
if (result == 0) {
/* Advertisement hasn't changed, but maybe aneg was never on to
* begin with? Or maybe phy was isolated?
@@ -870,13 +862,11 @@ int genphy_update_link(struct phy_device
/* Do a fake read */
status = phy_read(phydev, MII_BMSR);
-
if (status < 0)
return status;
/* Read link and autonegotiation status */
status = phy_read(phydev, MII_BMSR);
-
if (status < 0)
return status;
@@ -916,12 +906,10 @@ int genphy_read_status(struct phy_device
if (phydev->supported & (SUPPORTED_1000baseT_Half
| SUPPORTED_1000baseT_Full)) {
lpagb = phy_read(phydev, MII_STAT1000);
-
if (lpagb < 0)
return lpagb;
adv = phy_read(phydev, MII_CTRL1000);
-
if (adv < 0)
return adv;
@@ -931,14 +919,12 @@ int genphy_read_status(struct phy_device
}
lpa = phy_read(phydev, MII_LPA);
-
if (lpa < 0)
return lpa;
phydev->lp_advertising |= mii_lpa_to_ethtool_lpa_t(lpa);
adv = phy_read(phydev, MII_ADVERTISE);
-
if (adv < 0)
return adv;
@@ -1007,7 +993,6 @@ static int genphy_config_init(struct phy
/* Do we support autonegotiation? */
val = phy_read(phydev, MII_BMSR);
-
if (val < 0)
return val;
@@ -1025,7 +1010,6 @@ static int genphy_config_init(struct phy
if (val & BMSR_ESTATEN) {
val = phy_read(phydev, MII_ESTATUS);
-
if (val < 0)
return val;
@@ -1146,7 +1130,6 @@ int phy_driver_register(struct phy_drive
new_driver->driver.remove = phy_remove;
retval = driver_register(&new_driver->driver);
-
if (retval) {
pr_err("%s: Error %d in registering driver\n",
new_driver->name, retval);
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 7/8] phylib: remove unused adjust_state() callback
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
` (5 preceding siblings ...)
2014-01-05 0:24 ` [PATCH v2 6/8] phy: kill excess empty lines Sergei Shtylyov
@ 2014-01-05 0:27 ` Sergei Shtylyov
2014-01-05 0:28 ` [PATCH v2 8/8] phylib: make phy_scan_fixups() static Sergei Shtylyov
2014-01-05 0:39 ` [PATCH v2 0/6] phylib: cleanups David Miller
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:27 UTC (permalink / raw)
To: netdev
Remove adjust_state() callback from 'struct phy_device' since it seems to have
never been really used from the inception: phy_start_machine() has been always
called with 2nd argument equal to NULL.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- resolved reject, refreshed the patch;
- added () to the subject.
drivers/net/phy/mdio_bus.c | 4 ++--
drivers/net/phy/phy.c | 17 +++--------------
drivers/net/phy/phy_device.c | 2 +-
include/linux/phy.h | 7 +------
4 files changed, 7 insertions(+), 23 deletions(-)
Index: net-next/drivers/net/phy/mdio_bus.c
===================================================================
--- net-next.orig/drivers/net/phy/mdio_bus.c
+++ net-next/drivers/net/phy/mdio_bus.c
@@ -379,7 +379,7 @@ static int mdio_bus_resume(struct device
no_resume:
if (phydev->attached_dev && phydev->adjust_link)
- phy_start_machine(phydev, NULL);
+ phy_start_machine(phydev);
return 0;
}
@@ -401,7 +401,7 @@ static int mdio_bus_restore(struct devic
phydev->link = 0;
phydev->state = PHY_UP;
- phy_start_machine(phydev, NULL);
+ phy_start_machine(phydev);
return 0;
}
Index: net-next/drivers/net/phy/phy.c
===================================================================
--- net-next.orig/drivers/net/phy/phy.c
+++ net-next/drivers/net/phy/phy.c
@@ -406,21 +406,15 @@ EXPORT_SYMBOL(phy_start_aneg);
/**
* phy_start_machine - start PHY state machine tracking
* @phydev: the phy_device struct
- * @handler: callback function for state change notifications
*
* Description: The PHY infrastructure can run a state machine
* which tracks whether the PHY is starting up, negotiating,
* etc. This function starts the timer which tracks the state
- * of the PHY. If you want to be notified when the state changes,
- * pass in the callback @handler, otherwise, pass NULL. If you
- * want to maintain your own state machine, do not call this
- * function.
+ * of the PHY. If you want to maintain your own state machine,
+ * do not call this function.
*/
-void phy_start_machine(struct phy_device *phydev,
- void (*handler)(struct net_device *))
+void phy_start_machine(struct phy_device *phydev)
{
- phydev->adjust_state = handler;
-
queue_delayed_work(system_power_efficient_wq, &phydev->state_queue, HZ);
}
@@ -440,8 +434,6 @@ void phy_stop_machine(struct phy_device
if (phydev->state > PHY_UP)
phydev->state = PHY_UP;
mutex_unlock(&phydev->lock);
-
- phydev->adjust_state = NULL;
}
/**
@@ -706,9 +698,6 @@ void phy_state_machine(struct work_struc
mutex_lock(&phydev->lock);
- if (phydev->adjust_state)
- phydev->adjust_state(phydev->attached_dev);
-
switch (phydev->state) {
case PHY_DOWN:
case PHY_STARTING:
Index: net-next/drivers/net/phy/phy_device.c
===================================================================
--- net-next.orig/drivers/net/phy/phy_device.c
+++ net-next/drivers/net/phy/phy_device.c
@@ -422,7 +422,7 @@ int phy_connect_direct(struct net_device
return rc;
phy_prepare_link(phydev, handler);
- phy_start_machine(phydev, NULL);
+ phy_start_machine(phydev);
if (phydev->irq > 0)
phy_start_interrupts(phydev);
Index: net-next/include/linux/phy.h
===================================================================
--- net-next.orig/include/linux/phy.h
+++ net-next/include/linux/phy.h
@@ -282,8 +282,6 @@ struct phy_c45_device_ids {
* attached_dev: The attached enet driver's device instance ptr
* adjust_link: Callback for the enet controller to respond to
* changes in the link state.
- * adjust_state: Callback for the enet driver to respond to
- * changes in the state machine.
*
* speed, duplex, pause, supported, advertising, lp_advertising,
* and autoneg are used like in mii_if_info
@@ -364,8 +362,6 @@ struct phy_device {
struct net_device *attached_dev;
void (*adjust_link)(struct net_device *dev);
-
- void (*adjust_state)(struct net_device *dev);
};
#define to_phy_device(d) container_of(d, struct phy_device, dev)
@@ -585,8 +581,7 @@ int phy_drivers_register(struct phy_driv
void phy_state_machine(struct work_struct *work);
void phy_change(struct work_struct *work);
void phy_mac_interrupt(struct phy_device *phydev, int new_link);
-void phy_start_machine(struct phy_device *phydev,
- void (*handler)(struct net_device *));
+void phy_start_machine(struct phy_device *phydev);
void phy_stop_machine(struct phy_device *phydev);
int phy_ethtool_sset(struct phy_device *phydev, struct ethtool_cmd *cmd);
int phy_ethtool_gset(struct phy_device *phydev, struct ethtool_cmd *cmd);
^ permalink raw reply [flat|nested] 11+ messages in thread* [PATCH v2 8/8] phylib: make phy_scan_fixups() static
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
` (6 preceding siblings ...)
2014-01-05 0:27 ` [PATCH v2 7/8] phylib: remove unused adjust_state() callback Sergei Shtylyov
@ 2014-01-05 0:28 ` Sergei Shtylyov
2014-01-05 0:39 ` [PATCH v2 0/6] phylib: cleanups David Miller
8 siblings, 0 replies; 11+ messages in thread
From: Sergei Shtylyov @ 2014-01-05 0:28 UTC (permalink / raw)
To: netdev
phy_scan_fixups() isn't and shouldn't be called by the drivers directly, so
unexport it. And since Florian Fainelli's recent patches, the function is only
called locally, so we can make it static as well.
Signed-off-by: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
---
Changes in version 2:
- resolved reject, refreshed the patch;
- added signoff.
drivers/net/phy/phy_device.c | 3 +--
include/linux/phy.h | 1 -
2 files changed, 1 insertion(+), 3 deletions(-)
Index: net-next/drivers/net/phy/phy_device.c
===================================================================
--- net-next.orig/drivers/net/phy/phy_device.c
+++ net-next/drivers/net/phy/phy_device.c
@@ -122,7 +122,7 @@ static int phy_needs_fixup(struct phy_de
}
/* Runs any matching fixups for this phydev */
-int phy_scan_fixups(struct phy_device *phydev)
+static int phy_scan_fixups(struct phy_device *phydev)
{
struct phy_fixup *fixup;
@@ -141,7 +141,6 @@ int phy_scan_fixups(struct phy_device *p
return 0;
}
-EXPORT_SYMBOL(phy_scan_fixups);
struct phy_device *phy_device_create(struct mii_bus *bus, int addr, int phy_id,
bool is_c45,
Index: net-next/include/linux/phy.h
===================================================================
--- net-next.orig/include/linux/phy.h
+++ net-next/include/linux/phy.h
@@ -596,7 +596,6 @@ int phy_register_fixup_for_id(const char
int (*run)(struct phy_device *));
int phy_register_fixup_for_uid(u32 phy_uid, u32 phy_uid_mask,
int (*run)(struct phy_device *));
-int phy_scan_fixups(struct phy_device *phydev);
int phy_init_eee(struct phy_device *phydev, bool clk_stop_enable);
int phy_get_eee_err(struct phy_device *phydev);
^ permalink raw reply [flat|nested] 11+ messages in thread* Re: [PATCH v2 0/6] phylib: cleanups
2014-01-05 0:15 [PATCH v2 0/6] phylib: cleanups Sergei Shtylyov
` (7 preceding siblings ...)
2014-01-05 0:28 ` [PATCH v2 8/8] phylib: make phy_scan_fixups() static Sergei Shtylyov
@ 2014-01-05 0:39 ` David Miller
8 siblings, 0 replies; 11+ messages in thread
From: David Miller @ 2014-01-05 0:39 UTC (permalink / raw)
To: sergei.shtylyov; +Cc: netdev
From: Sergei Shtylyov <sergei.shtylyov@cogentembedded.com>
Date: Sun, 5 Jan 2014 03:15:29 +0300
> This patchset mainly cleans up the phylib's coding style but then also
> removes some historically unused stuff. It's kind of follow up to the recent
> Florian Fainelli's series which didn't finish checkpatch.pl complaint fixing.
> The patchset is against DaveM's 'net-next.git' repo.
>
> [1/8] phy: coding style fixes
> [2/8] mdio_bus: coding style fixes
> [3/8] <linux/phy.h>: coding style fixes
> [4/8] phy: kill useless local variables
> [5/8] phy: kill excess code
> [6/8] phy: kill excess empty lines
> [7/8] phylib: remove unused adjust_state() callback
> [8/8] phylib: make phy_scan_fixups() static
Series applied, thanks.
^ permalink raw reply [flat|nested] 11+ messages in thread