From: Bernhard Thaler <bernhard.thaler@wvnet.at>
To: stephen@networkplumber.org, davem@davemloft.net
Cc: bridge@lists.linux-foundation.org, netdev@vger.kernel.org,
Bernhard Thaler <bernhard.thaler@wvnet.at>
Subject: [PATCHv2] bridge: change BR_GROUPFWD_RESTRICTED to allow forwarding of LLDP frames
Date: Mon, 4 May 2015 22:47:13 +0200 [thread overview]
Message-ID: <1430772433-16384-1-git-send-email-bernhard.thaler@wvnet.at> (raw)
In-Reply-To: <20150401155001.40d58a37@urahara>
BR_GROUPFWD_RESTRICTED bitmask restricts users from setting values to
/sys/class/net/brX/bridge/group_fwd_mask that allow forwarding of
some IEEE 802.1D Table 7-10 Reserved addresses:
(MAC Control) 802.3 01-80-C2-00-00-01
(Link Aggregation) 802.3 01-80-C2-00-00-02
802.1AB LLDP 01-80-C2-00-00-0E
Change BR_GROUPFWD_RESTRICTED to allow to forward LLDP frames and document
group_fwd_mask.
e.g.
echo 16384 > /sys/class/net/brX/bridge/group_fwd_mask
allows to forward LLDP frames.
This may be needed for bridge setups used for network troubleshooting or
any other scenario where forwarding of LLDP frames is desired (e.g. bridge
connecting a virtual machine to real switch transmitting LLDP frames that
virtual machine needs to receive).
Tested on a simple bridge setup with two interfaces and host transmitting
LLDP frames on one side of this bridge (used lldpd). Setting group_fwd_mask
as described above lets LLDP frames traverse bridge.
Signed-off-by: Bernhard Thaler <bernhard.thaler@wvnet.at>
---
v2
- rebased to current net-next
- subject line changed to make clear that it will not be default
but allows to forward LLDP after setting flag value
- added reference to test with lldpd generated LLDP packets
(instead of hand-crafting LLDP packets)
v1
- bridge: relax BR_GROUPFWD_RESTRICTED to forward LLDP frames
Documentation/ABI/testing/sysfs-class-net | 19 +++++++++++++++++++
net/bridge/br_private.h | 4 ++--
2 files changed, 21 insertions(+), 2 deletions(-)
diff --git a/Documentation/ABI/testing/sysfs-class-net b/Documentation/ABI/testing/sysfs-class-net
index 5ecfd72..668604f 100644
--- a/Documentation/ABI/testing/sysfs-class-net
+++ b/Documentation/ABI/testing/sysfs-class-net
@@ -39,6 +39,25 @@ Description:
Format is a string, e.g: 00:11:22:33:44:55 for an Ethernet MAC
address.
+What: /sys/class/net/<bridge iface>/bridge/group_fwd_mask
+Date: January 2012
+KernelVersion: 3.2
+Contact: netdev@vger.kernel.org
+Description:
+ Bitmask to allow forwarding of link local frames with address
+ 01-80-C2-00-00-0X on a bridge device. Only values that set bits
+ not matching BR_GROUPFWD_RESTRICTED in net/bridge/br_private.h
+ allowed.
+ Default value 0 does not forward any link local frames.
+
+ Restricted bits:
+ 0: 01-80-C2-00-00-00 Bridge Group Address used for STP
+ 1: 01-80-C2-00-00-01 (MAC Control) 802.3 used for MAC PAUSE
+ 2: 01-80-C2-00-00-02 (Link Aggregation) 802.3ad
+
+ Any values not setting these bits can be used. Take special
+ care when forwarding control frames e.g. 802.1X-PAE or LLDP.
+
What: /sys/class/net/<iface>/broadcast
Date: April 2005
KernelVersion: 2.6.12
diff --git a/net/bridge/br_private.h b/net/bridge/br_private.h
index 3362c29..1f36fa7 100644
--- a/net/bridge/br_private.h
+++ b/net/bridge/br_private.h
@@ -33,8 +33,8 @@
/* Control of forwarding link local multicast */
#define BR_GROUPFWD_DEFAULT 0
-/* Don't allow forwarding control protocols like STP and LLDP */
-#define BR_GROUPFWD_RESTRICTED 0x4007u
+/* Don't allow forwarding of control protocols like STP, MAC PAUSE and LACP */
+#define BR_GROUPFWD_RESTRICTED 0x0007u
/* The Nearest Customer Bridge Group Address, 01-80-C2-00-00-[00,0B,0C,0D,0F] */
#define BR_GROUPFWD_8021AD 0xB801u
--
1.7.10.4
next prev parent reply other threads:[~2015-05-04 22:00 UTC|newest]
Thread overview: 7+ messages / expand[flat|nested] mbox.gz Atom feed top
2015-03-22 22:24 [RFC 1/1] bridge: relax BR_GROUPFWD_RESTRICTED to forward LLDP frames Bernhard Thaler
2015-03-29 22:06 ` [PATCH] " Bernhard Thaler
2015-04-01 19:28 ` David Miller
2015-04-01 21:03 ` Bernhard Thaler
2015-04-01 22:50 ` Stephen Hemminger
2015-05-04 20:47 ` Bernhard Thaler [this message]
2015-05-05 23:21 ` [PATCHv2] bridge: change BR_GROUPFWD_RESTRICTED to allow forwarding of " David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1430772433-16384-1-git-send-email-bernhard.thaler@wvnet.at \
--to=bernhard.thaler@wvnet.at \
--cc=bridge@lists.linux-foundation.org \
--cc=davem@davemloft.net \
--cc=netdev@vger.kernel.org \
--cc=stephen@networkplumber.org \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox