[PATCH net] net: dsa: mv88e6xxx: Fix binding documentation for MDIO busses

[PATCH net] net: dsa: mv88e6xxx: Fix binding documentation for MDIO busses

[Andrew Lunn]

The MDIO busses are switch proprieties and so should be inside the
switch node. Fix the examples in the binding document.

Reported-by: 尤晓杰 <yxj790222@163.com>
Signed-off-by: Andrew Lunn <andrew@lunn.ch>
Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")
---
 .../devicetree/bindings/net/dsa/marvell.txt        | 48 +++++++++++-----------
 1 file changed, 25 insertions(+), 23 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/dsa/marvell.txt b/Documentation/devicetree/bindings/net/dsa/marvell.txt
index 1d4d0f49c9d0..8c033d48e2ba 100644
--- a/Documentation/devicetree/bindings/net/dsa/marvell.txt
+++ b/Documentation/devicetree/bindings/net/dsa/marvell.txt
@@ -50,14 +50,15 @@ Example:
 			compatible = "marvell,mv88e6085";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		};
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-				interrupt-parent = <&switch0>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
 		};
 	};
@@ -74,23 +75,24 @@ Example:
 			compatible = "marvell,mv88e6390";
 			reg = <0>;
 			reset-gpios = <&gpio5 1 GPIO_ACTIVE_LOW>;
-		};
-		mdio {
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy0: switch1phy0@0 {
-				reg = <0>;
-				interrupt-parent = <&switch0>;
-				interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+
+			mdio {
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy0: switch1phy0@0 {
+					reg = <0>;
+					interrupt-parent = <&switch0>;
+					interrupts = <0 IRQ_TYPE_LEVEL_HIGH>;
+				};
 			};
-		};
 
-		mdio1 {
-			compatible = "marvell,mv88e6xxx-mdio-external";
-			#address-cells = <1>;
-			#size-cells = <0>;
-			switch1phy9: switch1phy0@9 {
-				reg = <9>;
+			mdio1 {
+				compatible = "marvell,mv88e6xxx-mdio-external";
+				#address-cells = <1>;
+				#size-cells = <0>;
+				switch1phy9: switch1phy0@9 {
+					reg = <9>;
+				};
 			};
 		};
 	};
-- 
2.16.2

Re: [PATCH net] net: dsa: mv88e6xxx: Fix binding documentation for MDIO busses

[David Miller]

From: Andrew Lunn <andrew@lunn.ch>
Date: Fri, 16 Mar 2018 18:03:46 +0100

> The MDIO busses are switch proprieties and so should be inside the
> switch node. Fix the examples in the binding document.
> 
> Reported-by: 尤晓杰 <yxj790222@163.com>
> Signed-off-by: Andrew Lunn <andrew@lunn.ch>
> Fixes: a3c53be55c95 ("net: dsa: mv88e6xxx: Support multiple MDIO busses")

Applied with "properties" spelling fixed.

Thank you.