From: Tan Xiaojun <tanxiaojun@huawei.com>
To: <yisen.zhuang@huawei.com>, <salil.mehta@huawei.com>,
<davem@davemloft.net>, <lipeng321@huawei.com>,
<linyunsheng@huawei.com>, <shenjian15@huawei.com>,
<tanhuazhong@huawei.com>, <liangfuyun1@huawei.com>
Cc: <netdev@vger.kernel.org>, <linux-kernel@vger.kernel.org>
Subject: [PATCH net-next] net: hns3: add common validation in hclge_dcb
Date: Mon, 19 Nov 2018 21:02:15 +0800 [thread overview]
Message-ID: <1542632535-18210-1-git-send-email-tanxiaojun@huawei.com> (raw)
From: Yunsheng Lin <linyunsheng@huawei.com>
Before setting tm related configuration to hardware, driver
needs to check the configuration provided by user is valid.
Currently hclge_ieee_setets and hclge_setup_tc both implement
their own checking, which has a lot in common.
This patch addes hclge_dcb_common_validate to do the common
checking. The checking in hclge_tm_prio_tc_info_update
and hclge_tm_schd_info_update is unnecessary now, so change
the return type to void, which removes the need to do error
handling when one of the checking fails.
Also, ets->prio_tc is indexed by user prio and ets->tc_tsa is
indexed by tc num, so this patch changes them to use different
index.
Signed-off-by: Yunsheng Lin <linyunsheng@huawei.com>
Signed-off-by: Tan Xiaojun <tanxiaojun@huawei.com>
---
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c | 70 +++++++++++++++-------
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c | 14 +----
.../net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h | 4 +-
3 files changed, 53 insertions(+), 35 deletions(-)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
index e72f724..f6323b2 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_dcb.c
@@ -35,7 +35,9 @@ static int hclge_ieee_ets_to_tm_info(struct hclge_dev *hdev,
}
}
- return hclge_tm_prio_tc_info_update(hdev, ets->prio_tc);
+ hclge_tm_prio_tc_info_update(hdev, ets->prio_tc);
+
+ return 0;
}
static void hclge_tm_info_to_ieee_ets(struct hclge_dev *hdev,
@@ -70,25 +72,61 @@ static int hclge_ieee_getets(struct hnae3_handle *h, struct ieee_ets *ets)
return 0;
}
+static int hclge_dcb_common_validate(struct hclge_dev *hdev, u8 num_tc,
+ u8 *prio_tc)
+{
+ int i;
+
+ if (num_tc > hdev->tc_max) {
+ dev_err(&hdev->pdev->dev,
+ "tc num checking failed, %u > tc_max(%u)\n",
+ num_tc, hdev->tc_max);
+ return -EINVAL;
+ }
+
+ for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) {
+ if (prio_tc[i] >= num_tc) {
+ dev_err(&hdev->pdev->dev,
+ "prio_tc[%u] checking failed, %u >= num_tc(%u)\n",
+ i, prio_tc[i], num_tc);
+ return -EINVAL;
+ }
+ }
+
+ for (i = 0; i < hdev->num_alloc_vport; i++) {
+ if (num_tc > hdev->vport[i].alloc_tqps) {
+ dev_err(&hdev->pdev->dev,
+ "allocated tqp(%u) checking failed, %u > tqp(%u)\n",
+ i, num_tc, hdev->vport[i].alloc_tqps);
+ return -EINVAL;
+ }
+ }
+
+ return 0;
+}
+
static int hclge_ets_validate(struct hclge_dev *hdev, struct ieee_ets *ets,
u8 *tc, bool *changed)
{
bool has_ets_tc = false;
u32 total_ets_bw = 0;
u8 max_tc = 0;
+ int ret;
u8 i;
- for (i = 0; i < HNAE3_MAX_TC; i++) {
- if (ets->prio_tc[i] >= hdev->tc_max ||
- i >= hdev->tc_max)
- return -EINVAL;
-
+ for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) {
if (ets->prio_tc[i] != hdev->tm_info.prio_tc[i])
*changed = true;
if (ets->prio_tc[i] > max_tc)
max_tc = ets->prio_tc[i];
+ }
+ ret = hclge_dcb_common_validate(hdev, max_tc + 1, ets->prio_tc);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < HNAE3_MAX_TC; i++) {
switch (ets->tc_tsa[i]) {
case IEEE_8021QAZ_TSA_STRICT:
if (hdev->tm_info.tc_info[i].tc_sch_mode !=
@@ -184,9 +222,7 @@ static int hclge_ieee_setets(struct hnae3_handle *h, struct ieee_ets *ets)
if (ret)
return ret;
- ret = hclge_tm_schd_info_update(hdev, num_tc);
- if (ret)
- return ret;
+ hclge_tm_schd_info_update(hdev, num_tc);
ret = hclge_ieee_ets_to_tm_info(hdev, ets);
if (ret)
@@ -305,20 +341,12 @@ static int hclge_setup_tc(struct hnae3_handle *h, u8 tc, u8 *prio_tc)
if (hdev->flag & HCLGE_FLAG_DCB_ENABLE)
return -EINVAL;
- if (tc > hdev->tc_max) {
- dev_err(&hdev->pdev->dev,
- "setup tc failed, tc(%u) > tc_max(%u)\n",
- tc, hdev->tc_max);
- return -EINVAL;
- }
-
- ret = hclge_tm_schd_info_update(hdev, tc);
+ ret = hclge_dcb_common_validate(hdev, tc, prio_tc);
if (ret)
- return ret;
+ return -EINVAL;
- ret = hclge_tm_prio_tc_info_update(hdev, prio_tc);
- if (ret)
- return ret;
+ hclge_tm_schd_info_update(hdev, tc);
+ hclge_tm_prio_tc_info_update(hdev, prio_tc);
ret = hclge_tm_init_hw(hdev);
if (ret)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
index 494e562..00458da 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.c
@@ -1259,15 +1259,13 @@ int hclge_pause_setup_hw(struct hclge_dev *hdev)
return 0;
}
-int hclge_tm_prio_tc_info_update(struct hclge_dev *hdev, u8 *prio_tc)
+void hclge_tm_prio_tc_info_update(struct hclge_dev *hdev, u8 *prio_tc)
{
struct hclge_vport *vport = hdev->vport;
struct hnae3_knic_private_info *kinfo;
u32 i, k;
for (i = 0; i < HNAE3_MAX_USER_PRIO; i++) {
- if (prio_tc[i] >= hdev->tm_info.num_tc)
- return -EINVAL;
hdev->tm_info.prio_tc[i] = prio_tc[i];
for (k = 0; k < hdev->num_alloc_vport; k++) {
@@ -1275,18 +1273,12 @@ int hclge_tm_prio_tc_info_update(struct hclge_dev *hdev, u8 *prio_tc)
kinfo->prio_tc[i] = prio_tc[i];
}
}
- return 0;
}
-int hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc)
+void hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc)
{
u8 i, bit_map = 0;
- for (i = 0; i < hdev->num_alloc_vport; i++) {
- if (num_tc > hdev->vport[i].alloc_tqps)
- return -EINVAL;
- }
-
hdev->tm_info.num_tc = num_tc;
for (i = 0; i < hdev->tm_info.num_tc; i++)
@@ -1300,8 +1292,6 @@ int hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc)
hdev->hw_tc_map = bit_map;
hclge_tm_schd_info_init(hdev);
-
- return 0;
}
int hclge_tm_init_hw(struct hclge_dev *hdev)
diff --git a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
index 25eef13..4bd916a 100644
--- a/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
+++ b/drivers/net/ethernet/hisilicon/hns3/hns3pf/hclge_tm.h
@@ -131,8 +131,8 @@ struct hclge_port_shapping_cmd {
int hclge_tm_schd_init(struct hclge_dev *hdev);
int hclge_pause_setup_hw(struct hclge_dev *hdev);
int hclge_tm_schd_mode_hw(struct hclge_dev *hdev);
-int hclge_tm_prio_tc_info_update(struct hclge_dev *hdev, u8 *prio_tc);
-int hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc);
+void hclge_tm_prio_tc_info_update(struct hclge_dev *hdev, u8 *prio_tc);
+void hclge_tm_schd_info_update(struct hclge_dev *hdev, u8 num_tc);
int hclge_tm_dwrr_cfg(struct hclge_dev *hdev);
int hclge_tm_map_cfg(struct hclge_dev *hdev);
int hclge_tm_init_hw(struct hclge_dev *hdev);
--
2.7.4
next reply other threads:[~2018-11-19 22:52 UTC|newest]
Thread overview: 3+ messages / expand[flat|nested] mbox.gz Atom feed top
2018-11-19 13:02 Tan Xiaojun [this message]
2018-11-20 1:50 ` [PATCH net-next] net: hns3: add common validation in hclge_dcb Yunsheng Lin
2018-11-20 2:32 ` David Miller
Reply instructions:
You may reply publicly to this message via plain-text email
using any one of the following methods:
* Save the following mbox file, import it into your mail client,
and reply-to-all from there: mbox
Avoid top-posting and favor interleaved quoting:
https://en.wikipedia.org/wiki/Posting_style#Interleaved_style
* Reply using the --to, --cc, and --in-reply-to
switches of git-send-email(1):
git send-email \
--in-reply-to=1542632535-18210-1-git-send-email-tanxiaojun@huawei.com \
--to=tanxiaojun@huawei.com \
--cc=davem@davemloft.net \
--cc=liangfuyun1@huawei.com \
--cc=linux-kernel@vger.kernel.org \
--cc=linyunsheng@huawei.com \
--cc=lipeng321@huawei.com \
--cc=netdev@vger.kernel.org \
--cc=salil.mehta@huawei.com \
--cc=shenjian15@huawei.com \
--cc=tanhuazhong@huawei.com \
--cc=yisen.zhuang@huawei.com \
/path/to/YOUR_REPLY
https://kernel.org/pub/software/scm/git/docs/git-send-email.html
* If your mail client supports setting the In-Reply-To header
via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line
before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox