[PATCH net-next v11 0/6] net: pcs: add basic support for RK3568 XPCS

[PATCH net-next v11 0/6] net: pcs: add basic support for RK3568 XPCS

[Coia Prant]

This series adds proper SGMII support for the Rockchip RK3568 SoC
using the integrated Synopsys DesignWare XPCS, along with necessary
fixes and refactoring in the stmmac core and XPCS driver.

Motivation
==========
The RK3568 integrates a DW XPCS accessed via APB3 and connected to
a Naneng Combo SerDes PHY.  Several boards (e.g., Ariaboard
Photonicat) use this interface for Gigabit Ethernet.  However, the
current upstream stmmac driver does not support this configuration,
and the XPCS driver has issues in SGMII poll mode that cause the
link to be reported incorrectly.

This series addresses these issues by:
- Adding ANRESTART support for SGMII link recovery
- Adding a Rockchip XPCS platform glue driver and wiring it up in
  dwmac-rk

Series overview
===============

RK3568 XPCS/SGMII:
  Patch 1: add ANRESTART support for SGMII link recovery
  Patch 2: DT binding for Rockchip RK3568 XPCS
  Patch 3: implement the Rockchip XPCS platform glue driver
  Patch 4: DT binding for Rockchip DWMAC PCS
  Patch 5: wire up SGMII support in dwmac-rk
  Patch 6: update MAINTAINERS

Dependencies
============
- Generic PM domain (genpd) changes:
  https://lore.kernel.org/all/20260925041751.495818-1-coiaprant@gmail.com/
- PHY binding+driver (Naneng Combo PHY SGMII MAC selection):
  https://lore.kernel.org/all/20261006162807.2843858-1-coiaprant@gmail.com/
- stmmac XPCS lifetime management fix:
  https://lore.kernel.org/all/20261005221749.1104430-1-coiaprant@gmail.com/

The DTS changes using the PHY property are sent separately to
Heiko/linux-rockchip. There is no hard build dependency; the pieces
can converge during the merge window.

Changelog
=========

Changes since v10:

- XPCS binding: drop the ethernet-pcs-mii child nodes and the phy-names
  property. The MII port used by SGMII is derived from the MAC it is
  routed to (GMAC0 -> port 0, GMAC1 -> port 1), so the ports do not need
  to be described.

- dwmac binding: require phy-mode for rockchip,rk3568-gmac, and require
  pcs-handle only when phy-mode is "sgmii". Without the explicit
  required: [ phy-mode ], the "if" would match even when phy-mode is
  absent (Rob).

- XPCS glue driver: use pdev->dev.links.status instead of
  link->supplier->links.status, and drop the unused reg argument from
  the read remapping helper.

- dwmac-rk: document that the MII port passed to xpcs_rk_create() is the
  GMAC id, matching the hardware routing. Rewrite the in-band vs
  out-of-band section of the commit message to match the driver
  behavior and the actual clock rates.

- DTS: drop the ethernet-pcs-mii sub-nodes; pcs-handle now points at the
  XPCS node itself.

- Commit messages updated.

Key design decisions
====================
- The stmmac core now delegates XPCS creation entirely to platform
  drivers via pcs_init/pcs_exit.  This is necessary because the
  generic XPCS creation logic would override any XPCS set up by the
  platform driver.

- The Rockchip XPCS driver creates a virtual MDIO bus over the APB3
  registers and implements address remapping.  The generic XPCS core
  handles all PCS configuration via phylink_pcs_ops.

- On RK3568 in SGMII mode, the MAC clock is fixed at 125 MHz and
  cannot be dynamically changed.  In-band mode is used, and the
  generic stmmac set_clk_tx_rate callback is disabled to prevent
  incorrect clock updates that would break RX.

- The SerDes and power domain are attached to the XPCS device tree
  node rather than the MAC node. This reflects the actual hardware
  topology and simplifies the dwmac-rk driver by keeping all PCS-related
  resources self-contained. It also prepares for possible future QSGMII
  support, where a single SerDes serves multiple MACs and would be
  more naturally managed under the XPCS node.

Testing
=======
Board: Ariaboard Photonicat (RK3568)
OS: Armbian (trixie)
Kernel: 6.18 (backports)
Result: The SGMII interface obtains an IP address, SSH works, and
        ping traffic passes without loss.

Notes
=====
- When testing out-band mode with set_clk_tx_rate, only 1000Mbps
  works on both TX/RX; 10/100Mbps only works on TX side.

Acknowledgments
===============
This work was inspired by and builds upon the excellent work of others:
- Serge Semin's Synopsys DesignWare XPCS platform driver (pcs-xpcs-plat.c)
- Clément Léger's Renesas MIIC driver (pcs-rzn1-miic.c)
- The Rockchip TRM and downstream OEM drivers

Thanks in advance,
Coia Prant
---
Coia Prant (6):
  net: pcs: xpcs: add ANRESTART support for SGMII link recovery
  dt-bindings: net: pcs: add rockchip,rk3568-xpcs support
  net: pcs: xpcs: add Rockchip RK3568 platform glue driver
  dt-bindings: net: rockchip-dwmac: document pcs-handle
  net: stmmac: dwmac-rk: add SGMII support for RK3568
  MAINTAINERS: add entry for Rockchip XPCS driver

 .../net/pcs/rockchip,rk3568-xpcs.yaml         |  69 ++
 .../bindings/net/rockchip-dwmac.yaml          |  27 +
 MAINTAINERS                                   |   9 +
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 131 +++-
 drivers/net/pcs/Kconfig                       |  25 +
 drivers/net/pcs/Makefile                      |   5 +-
 drivers/net/pcs/pcs-xpcs-rk.c                 | 598 ++++++++++++++++++
 drivers/net/pcs/pcs-xpcs.c                    |  35 +-
 include/linux/pcs/pcs-xpcs-rk.h               |  11 +
 10 files changed, 883 insertions(+), 28 deletions(-)
 create mode 100644 Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml
 create mode 100644 drivers/net/pcs/pcs-xpcs-rk.c
 create mode 100644 include/linux/pcs/pcs-xpcs-rk.h

-- 
2.47.3

[PATCH net-next v11 1/6] net: pcs: xpcs: add ANRESTART support for SGMII link recovery

[Coia Prant]

On some hardware using the DesignWare XPCS IP (e.g., RK3568 MAC side
SGMII), the PCS does not automatically restart auto-negotiation when the
link goes down and comes back up. Without an explicit ANRESTART, the link
stays down forever.

Add BMCR_ANRESTART in two places:
1. In xpcs_config_aneg_c37_sgmii(), when starting AN, set ANRESTART
   alongside ANENABLE to initiate a fresh negotiation.
2. In xpcs_get_state_c37_sgmii(), when link is down and AN completion is
   detected, clear the interrupt and trigger ANRESTART to restart the
   negotiation process. Propagate the return value of the restart so
   errors are not silently ignored.

The restart cannot go through the .pcs_an_restart op: phylink only
calls it for 802.3z interfaces, and SGMII is not one. Changing hardware
state from pcs_get_state() is already done elsewhere in this driver
(xpcs_get_state_c73() calls xpcs_soft_reset() and xpcs_do_config()),
so the same pattern is used here.

The latch is cleared before issuing the restart, not after: clearing it
afterwards would discard a freshly latched ANCMPLT from the new
negotiation. If an MDIO access fails at this point, it indicates an
unrecoverable hardware condition until reset.

Also clear DW_VR_MII_AN_INTR_STS in xpcs_config_aneg_c37_sgmii() before
starting AN, matching what xpcs_config_aneg_c37_1000basex() already does.
On the non-inband path the function now returns the result of that write
instead of the DIG_CTRL1 modify.

Update the comment in xpcs_config_aneg_c37_sgmii() to note that although
the DesignWare databook says AN restart is not needed for MAC side SGMII,
some implementations (e.g. Rockchip RK3568) require it to recover the
link after a disconnect.

This is not a fix for an existing mainline platform: the affected
platform (RK3568 XPCS) is introduced later in the same series.

Tested-by: Jiawen Wu <jiawenwu@trustnetic.com>
Tested-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/net/pcs/pcs-xpcs.c | 35 +++++++++++++++++++++++++++++------
 1 file changed, 29 insertions(+), 6 deletions(-)

diff --git a/drivers/net/pcs/pcs-xpcs.c b/drivers/net/pcs/pcs-xpcs.c
index b415b93d77c15..6466e0ff2a98b 100644
--- a/drivers/net/pcs/pcs-xpcs.c
+++ b/drivers/net/pcs/pcs-xpcs.c
@@ -761,7 +761,9 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	 *    DW xPCS used with DW EQoS MAC is always MAC side SGMII.
 	 * 4) VR_MII_DIG_CTRL1 Bit(9) [MAC_AUTO_SW] = 1b (Automatic
 	 *    speed/duplex mode change by HW after SGMII AN complete)
-	 * 5) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN)
+	 * 5) VR_MII_AN_INTR_STS = 0x0 (Clear CL37 AN complete status)
+	 * 6) VR_MII_MMD_CTRL Bit(12) [AN_ENABLE] = 1b (Enable SGMII AN)
+	 *    VR_MII_MMD_CTRL Bit(9) [AN_RESTART] = 1b (Restart SGMII AN)
 	 *
 	 * Note that VR_MII_MMD_CTRL is MII_BMCR.
 	 *
@@ -769,7 +771,14 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	 *	 SR_MII_AN_ADV. MAC side SGMII receives AN Tx Config from
 	 *	 PHY about the link state change after C28 AN is completed
 	 *	 between PHY and Link Partner. There is also no need to
-	 *	 trigger AN restart for MAC-side SGMII.
+	 *	 trigger AN restart for MAC-side SGMII on most devices.
+	 *
+	 * Note: While the DesignWare databook states that AN restart is
+	 *	 not needed for MAC side SGMII, some implementations (e.g.
+	 *	 Rockchip RK3568) exhibit a timing quirk when integrated with
+	 *	 phylink and do not restart AN automatically when the link
+	 *	 comes back up. An explicit AN restart is required on those
+	 *	 parts to recover the link after a disconnect.
 	 */
 	mdio_ctrl = xpcs_read(xpcs, MDIO_MMD_VEND2, MII_BMCR);
 	if (mdio_ctrl < 0)
@@ -816,9 +825,14 @@ static int xpcs_config_aneg_c37_sgmii(struct dw_xpcs *xpcs,
 	if (ret < 0)
 		return ret;
 
+	/* Clear CL37 AN complete status */
+	ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+	if (ret < 0)
+		return ret;
+
 	if (neg_mode == PHYLINK_PCS_NEG_INBAND_ENABLED)
 		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, MII_BMCR,
-				 mdio_ctrl | BMCR_ANENABLE);
+				 mdio_ctrl | BMCR_ANENABLE | BMCR_ANRESTART);
 
 	return ret;
 }
@@ -1093,9 +1107,18 @@ static int xpcs_get_state_c37_sgmii(struct dw_xpcs *xpcs,
 		return 0;
 	}
 
-	/* Clear AN complete status or interrupt */
-	if (state->an_complete)
-		xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+	if (state->an_complete) {
+		/* Clear AN complete status or interrupt */
+		ret = xpcs_write(xpcs, MDIO_MMD_VEND2, DW_VR_MII_AN_INTR_STS, 0);
+		if (ret < 0)
+			return ret;
+
+		/* Initiate the next round of AN */
+		ret = xpcs_modify(xpcs, MDIO_MMD_VEND2, MII_BMCR, BMCR_ANRESTART,
+				  BMCR_ANRESTART);
+		if (ret < 0)
+			return ret;
+	}
 
 	return 0;
 }
-- 
2.47.3

[PATCH net-next v11 2/6] dt-bindings: net: pcs: add rockchip,rk3568-xpcs support

[Coia Prant]

Add device tree binding documentation for the Synopsys DesignWare
XPCS integrated on the Rockchip RK3568 SoC.

The XPCS is accessed over the APB3 bus and internally connected to
a Naneng Combo SerDes PHY.  It supports 1000BASE-X, SGMII, and
QSGMII modes, with four MII ports.

The MII port used by the SGMII link is derived from the MAC it is
routed to: GMAC0 uses port 0, GMAC1 uses port 1.  The port index is
not an independent board-level configuration, so the binding does
not describe the ports.  If a future SoC needs per-port configuration
that cannot be derived, pcs-handle argument cells can be added then.

The CRU reset lines (SRST_XPCS*) are intentionally not described: no
in-tree user requests them, and bring-up relies on the PD_PIPE power
domain, the SerDes PHY and the in-IP soft reset. They can be added
later as optional without breaking ABI.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 .../net/pcs/rockchip,rk3568-xpcs.yaml         | 69 +++++++++++++++++++
 1 file changed, 69 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml

diff --git a/Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml b/Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml
new file mode 100644
index 0000000000000..a331880eb11c1
--- /dev/null
+++ b/Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml
@@ -0,0 +1,69 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/net/pcs/rockchip,rk3568-xpcs.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: Rockchip RK3568 Synopsys DesignWare Ethernet PCS
+
+maintainers:
+  - Coia Prant <coiaprant@gmail.com>
+
+description: |
+  Rockchip RK3568 SoC integrates a Synopsys DesignWare Ethernet Physical
+  Coding Sublayer (XPCS).
+  The PCS provides an interface between the Media Access Control (MAC)
+  and the Physical Medium Attachment (PMA) sublayer through a Media
+  Independent Interface (GMII).
+
+  The XPCS is accessed over the APB3 bus and internally connected to a
+  Naneng Combo SerDes PHY.
+  It supports 1000BASE-X, SGMII and QSGMII modes.
+
+properties:
+  compatible:
+    const: rockchip,rk3568-xpcs
+
+  reg:
+    maxItems: 1
+
+  clocks:
+    items:
+      - description: APB3 bus interface clock (clk_csr_i), required for register access
+      - description: EEE clock (clk_eee_i), required for Energy Efficient Ethernet operation
+
+  clock-names:
+    items:
+      - const: csr
+      - const: eee
+
+  phys:
+    maxItems: 1
+
+  power-domains:
+    maxItems: 1
+
+required:
+  - compatible
+  - reg
+  - clocks
+  - clock-names
+  - phys
+  - power-domains
+
+additionalProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/clock/rk3568-cru.h>
+    #include <dt-bindings/power/rk3568-power.h>
+    #include <dt-bindings/phy/phy.h>
+
+    ethernet-pcs@fda00000 {
+      compatible = "rockchip,rk3568-xpcs";
+      reg = <0xfda00000 0x200000>;
+      clocks = <&cru PCLK_XPCS>, <&cru CLK_XPCS_EEE>;
+      clock-names = "csr", "eee";
+      phys = <&combphy2 PHY_TYPE_SGMII>;
+      power-domains = <&power RK3568_PD_PIPE>;
+    };
-- 
2.47.3

Re: [PATCH net-next v11 2/6] dt-bindings: net: pcs: add rockchip,rk3568-xpcs support

[Rob Herring (Arm)]

On Fri, 09 Oct 2026 01:51:56 +0800, Coia Prant wrote:
> Add device tree binding documentation for the Synopsys DesignWare
> XPCS integrated on the Rockchip RK3568 SoC.
> 
> The XPCS is accessed over the APB3 bus and internally connected to
> a Naneng Combo SerDes PHY.  It supports 1000BASE-X, SGMII, and
> QSGMII modes, with four MII ports.
> 
> The MII port used by the SGMII link is derived from the MAC it is
> routed to: GMAC0 uses port 0, GMAC1 uses port 1.  The port index is
> not an independent board-level configuration, so the binding does
> not describe the ports.  If a future SoC needs per-port configuration
> that cannot be derived, pcs-handle argument cells can be added then.
> 
> The CRU reset lines (SRST_XPCS*) are intentionally not described: no
> in-tree user requests them, and bring-up relies on the PD_PIPE power
> domain, the SerDes PHY and the in-IP soft reset. They can be added
> later as optional without breaking ABI.
> 
> Signed-off-by: Coia Prant <coiaprant@gmail.com>
> ---
>  .../net/pcs/rockchip,rk3568-xpcs.yaml         | 69 +++++++++++++++++++
>  1 file changed, 69 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH net-next v11 3/6] net: pcs: xpcs: add Rockchip RK3568 platform glue driver

[Coia Prant]

The RK3568 SoC integrates a Synopsys DesignWare XPCS that is accessed
via APB3 memory-mapped registers.  This driver provides the glue logic
to make the XPCS accessible to the generic pcs-xpcs core.

The XPCS block contains four MII ports (0..3).  On RK3568 the MII port
used by SGMII follows the MAC it is routed to: GMAC0 maps to port 0 and
GMAC1 maps to port 1.  The glue driver receives the port index from the
MAC side and passes it to xpcs_create_mdiodev().

The hardware maps these ports to different MMDs:
  - port 0: MMD 7 (ROCKCHIP_MMD_MII)
  - port 1: MMD 2 (ROCKCHIP_MMD_MII1)
  - port 2: MMD 3 (ROCKCHIP_MMD_MII2)
  - port 3: MMD 4 (ROCKCHIP_MMD_MII3)

This driver creates a virtual MDIO bus that translates MDIO operations
to APB3 register accesses, with proper address remapping for each port.
The generic xpcs driver then creates a phylink_pcs instance on top of
this bus, allowing the MAC to use the PCS via the standard phylink API.

The generic XPCS platform glue (pcs-xpcs-plat.o) is split out of the
pcs_xpcs composite object into its own module, gated behind the new
PCS_XPCS_PLATFORM symbol.  The symbol defaults to PCS_XPCS, so existing
configurations keep the snps,dw-xpcs platform glue enabled without any
change.

PCS_XPCS_ROCKCHIP selects GENERIC_PHY and PM_GENERIC_DOMAINS.
ARCH_ROCKCHIP already selects PM, so the dependency of PM_GENERIC_DOMAINS
on PM is satisfied on the target platform.

The EEE multiplier is derived at runtime from the EEE clock rate instead
of being hardcoded, because the clock is muxed between gpll200 (200 MHz)
and cpll125 (125 MHz) and can be changed by the board or firmware.  A
64-bit intermediate avoids overflow on 32-bit builds, and the result is
clamped to the 4-bit DW_VR_MII_EEE_MULT_FACT_100NS field.

Power management
================
The XPCS, its SerDes PHY and the SATA/PCIe controllers share the PD_PIPE
power domain on RK3568.  genpd powers the domain down during system
suspend once every consumer is suspended, which also kills the SerDes
and the XPCS.

Boards that rely on MAC WoL need the PCS and SerDes alive to receive
magic packets, so PD_PIPE must stay powered across system suspend.  Keep
it on by marking the XPCS as part of the wakeup path via
device_set_wakeup_path().  genpd then leaves the domain powered, because
the Rockchip power domain driver sets GENPD_FLAG_ACTIVE_WAKEUP on
PD_PIPE, which makes genpd check the wakeup path of its consumers during
system suspend.

This is unconditional because the XPCS core currently has no platform
callback through which a consumer could convey the MAC WoL state, and
the state itself is dynamic: WoL is toggled at runtime via ethtool, so
a static DT property cannot express it either.  The affected hardware
is limited to RK3568 boards using SGMII, which are always-on routers
where system suspend is not a realistic use case; the extra power draw
is therefore acceptable.

Runtime PM is unaffected: the runtime callbacks only gate the CSR clock,
and dev_pm_genpd_rpm_always_on() already keeps PD_PIPE on at runtime.

Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 59, CRU_CLKSEL_CON29)
Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part2%20V1.1-20210301.pdf (Page 2078)
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/net/pcs/Kconfig         |  25 ++
 drivers/net/pcs/Makefile        |   5 +-
 drivers/net/pcs/pcs-xpcs-rk.c   | 598 ++++++++++++++++++++++++++++++++
 include/linux/pcs/pcs-xpcs-rk.h |  11 +
 4 files changed, 637 insertions(+), 2 deletions(-)
 create mode 100644 drivers/net/pcs/pcs-xpcs-rk.c
 create mode 100644 include/linux/pcs/pcs-xpcs-rk.h

diff --git a/drivers/net/pcs/Kconfig b/drivers/net/pcs/Kconfig
index e417fd66f660a..5382afcf95748 100644
--- a/drivers/net/pcs/Kconfig
+++ b/drivers/net/pcs/Kconfig
@@ -12,6 +12,31 @@ config PCS_XPCS
 	  This module provides a driver and helper functions for Synopsys
 	  DesignWare XPCS controllers.
 
+if PCS_XPCS
+
+config PCS_XPCS_PLATFORM
+	tristate "Generic XPCS controller support"
+	default PCS_XPCS
+	help
+	  Generic DWXPCS driver for platforms that don't require any
+	  platform specific code to function or is using platform
+	  data for setup.
+
+	  If you have a controller with this interface, say Y or M here.
+
+config PCS_XPCS_ROCKCHIP
+	tristate "Rockchip XPCS controller support"
+	default ARCH_ROCKCHIP
+	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
+	select GENERIC_PHY
+	select PM_GENERIC_DOMAINS if PM
+	help
+	  Support for XPCS controller on Rockchip RK356x SoC.
+
+	  If you have a Rockchip SoC with this interface, say Y or M here.
+
+endif # PCS_XPCS
+
 config PCS_LYNX
 	tristate
 	help
diff --git a/drivers/net/pcs/Makefile b/drivers/net/pcs/Makefile
index 4f7920618b900..f9f6cf2578d72 100644
--- a/drivers/net/pcs/Makefile
+++ b/drivers/net/pcs/Makefile
@@ -1,10 +1,11 @@
 # SPDX-License-Identifier: GPL-2.0
 # Makefile for Linux PCS drivers
 
-pcs_xpcs-$(CONFIG_PCS_XPCS)	:= pcs-xpcs.o pcs-xpcs-plat.o \
-				   pcs-xpcs-nxp.o pcs-xpcs-wx.o
+pcs_xpcs-$(CONFIG_PCS_XPCS)	:= pcs-xpcs.o pcs-xpcs-nxp.o pcs-xpcs-wx.o
 
 obj-$(CONFIG_PCS_XPCS)		+= pcs_xpcs.o
+obj-$(CONFIG_PCS_XPCS_PLATFORM) += pcs-xpcs-plat.o
+obj-$(CONFIG_PCS_XPCS_ROCKCHIP) += pcs-xpcs-rk.o
 obj-$(CONFIG_PCS_LYNX)		+= pcs-lynx.o
 obj-$(CONFIG_PCS_MTK_LYNXI)	+= pcs-mtk-lynxi.o
 obj-$(CONFIG_PCS_RZN1_MIIC)	+= pcs-rzn1-miic.o
diff --git a/drivers/net/pcs/pcs-xpcs-rk.c b/drivers/net/pcs/pcs-xpcs-rk.c
new file mode 100644
index 0000000000000..698a43b753341
--- /dev/null
+++ b/drivers/net/pcs/pcs-xpcs-rk.c
@@ -0,0 +1,598 @@
+// SPDX-License-Identifier: GPL-2.0
+/*
+ * Rockchip XPCS platform device driver
+ *
+ * Based on the Synopsys DesignWare XPCS platform driver.
+ * Copyright (C) 2024 Serge Semin
+ *
+ * Adapted for Rockchip SoCs, with reference to the Rockchip OEM driver.
+ * Copyright (C) 2026 Coia Prant
+ */
+
+#include <linux/atomic.h>
+#include <linux/bitfield.h>
+#include <linux/clk.h>
+#include <linux/device.h>
+#include <linux/io.h>
+#include <linux/iopoll.h>
+#include <linux/math.h>
+#include <linux/mdio.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/of_platform.h>
+#include <linux/pcs/pcs-xpcs-rk.h>
+#include <linux/phy.h>
+#include <linux/phy/phy.h>
+#include <linux/platform_device.h>
+#include <linux/pm_domain.h>
+#include <linux/pm_runtime.h>
+#include <linux/property.h>
+#include <linux/sizes.h>
+#include <linux/time.h>
+
+#include "pcs-xpcs.h"
+
+struct dw_xpcs_rk {
+	struct platform_device *pdev;
+	struct mii_bus *bus;
+	void __iomem *reg_base;
+	struct phy *serdes_phy;
+	struct clk *csr_clk;
+	struct clk *eee_clk;
+	u8 eee_mult_fact;
+};
+
+static ptrdiff_t xpcs_rk_addr_format(int dev, int reg)
+{
+	return FIELD_PREP(0x70000, dev) | FIELD_PREP(0xffff, reg);
+}
+
+static int xpcs_rk_read_reg(struct dw_xpcs_rk *pxpcs, int dev, int reg)
+{
+	ptrdiff_t csr;
+	int ret;
+
+	csr = xpcs_rk_addr_format(dev, reg);
+
+	ret = pm_runtime_resume_and_get(&pxpcs->pdev->dev);
+	if (ret)
+		return ret;
+
+	ret = readl(pxpcs->reg_base + (csr << 2)) & 0xffff;
+
+	pm_runtime_put(&pxpcs->pdev->dev);
+	return ret;
+}
+
+static int xpcs_rk_write_reg(struct dw_xpcs_rk *pxpcs, int dev, int reg, u16 val)
+{
+	ptrdiff_t csr;
+	int ret;
+
+	csr = xpcs_rk_addr_format(dev, reg);
+
+	ret = pm_runtime_resume_and_get(&pxpcs->pdev->dev);
+	if (ret)
+		return ret;
+
+	writel(val, pxpcs->reg_base + (csr << 2));
+
+	pm_runtime_put(&pxpcs->pdev->dev);
+	return 0;
+}
+
+#define ROCKCHIP_MMD_MII1	2
+#define ROCKCHIP_MMD_MII2	3
+#define ROCKCHIP_MMD_MII3	4
+#define ROCKCHIP_MMD_PMAPMD	6
+#define ROCKCHIP_MMD_MII	7
+
+static bool xpcs_rk_mdio_addr_validate(int addr)
+{
+	return !(addr < 0 || addr > 3);
+}
+
+static int xpcs_rk_mdio_read_remapping(int addr, int dev)
+{
+	switch (dev) {
+	case MDIO_MMD_PMAPMD:
+		return ROCKCHIP_MMD_PMAPMD;
+	case MDIO_MMD_VEND2:
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	/*
+	 * Reads are redirected by hardware to the port's read-only mirror;
+	 * only writes have to be targeted at MII (see the write path).
+	 */
+	switch (addr) {
+	case 0:
+		return ROCKCHIP_MMD_MII;
+	case 1:
+		return ROCKCHIP_MMD_MII1;
+	case 2:
+		return ROCKCHIP_MMD_MII2;
+	case 3:
+		return ROCKCHIP_MMD_MII3;
+	default:
+		return -ENODEV;
+	}
+}
+
+static int xpcs_rk_mdio_write_remapping(int addr, int dev, int reg)
+{
+	switch (dev) {
+	case MDIO_MMD_PMAPMD:
+		return ROCKCHIP_MMD_PMAPMD;
+	case MDIO_MMD_VEND2:
+		break;
+	default:
+		return -ENXIO;
+	}
+
+	/*
+	 * These registers physically live only in MII (the management port).
+	 * Ports 1-3 expose read-only mirrors of these bits, so writes must
+	 * always target MII; the read path remaps per address and the
+	 * hardware redirects to the port's mirror.
+	 */
+	switch (reg) {
+	case DW_VR_MII_AN_CTRL:
+	case DW_VR_MII_AN_INTR_STS:
+	case DW_VR_MII_EEE_MCTRL0:
+	case DW_VR_MII_EEE_MCTRL1:
+	case DW_VR_MII_DIG_CTRL2:
+		return ROCKCHIP_MMD_MII;
+	default:
+		break;
+	}
+
+	switch (addr) {
+	case 0:
+		return ROCKCHIP_MMD_MII;
+	case 1:
+		return ROCKCHIP_MMD_MII1;
+	case 2:
+		return ROCKCHIP_MMD_MII2;
+	case 3:
+		return ROCKCHIP_MMD_MII3;
+	default:
+		return -ENODEV;
+	}
+}
+
+static int xpcs_rk_read_c22(struct mii_bus *bus, int addr, int reg)
+{
+	struct dw_xpcs_rk *pxpcs = bus->priv;
+	int dev;
+
+	if (!xpcs_rk_mdio_addr_validate(addr))
+		return -ENODEV;
+
+	dev = xpcs_rk_mdio_read_remapping(addr, MDIO_MMD_VEND2);
+	if (dev < 0)
+		return 0xffff;
+
+	return xpcs_rk_read_reg(pxpcs, dev, reg);
+}
+
+static int xpcs_rk_write_c22(struct mii_bus *bus, int addr, int reg, u16 val)
+{
+	struct dw_xpcs_rk *pxpcs = bus->priv;
+	int dev;
+
+	if (!xpcs_rk_mdio_addr_validate(addr))
+		return -ENODEV;
+
+	dev = xpcs_rk_mdio_write_remapping(addr, MDIO_MMD_VEND2, reg);
+	if (dev < 0)
+		return 0;
+
+	return xpcs_rk_write_reg(pxpcs, dev, reg, val);
+}
+
+static int xpcs_rk_read_c45(struct mii_bus *bus, int addr, int dev, int reg)
+{
+	struct dw_xpcs_rk *pxpcs = bus->priv;
+
+	if (!xpcs_rk_mdio_addr_validate(addr))
+		return -ENODEV;
+
+	dev = xpcs_rk_mdio_read_remapping(addr, dev);
+	if (dev < 0)
+		return 0xffff;
+
+	return xpcs_rk_read_reg(pxpcs, dev, reg);
+}
+
+static int xpcs_rk_write_c45(struct mii_bus *bus, int addr, int dev, int reg, u16 val)
+{
+	struct dw_xpcs_rk *pxpcs = bus->priv;
+
+	if (!xpcs_rk_mdio_addr_validate(addr))
+		return -ENODEV;
+
+	dev = xpcs_rk_mdio_write_remapping(addr, dev, reg);
+	if (dev < 0)
+		return 0;
+
+	return xpcs_rk_write_reg(pxpcs, dev, reg, val);
+}
+
+static struct dw_xpcs_rk *xpcs_rk_create_data(struct platform_device *pdev)
+{
+	struct dw_xpcs_rk *pxpcs;
+
+	pxpcs = devm_kzalloc(&pdev->dev, sizeof(*pxpcs), GFP_KERNEL);
+	if (!pxpcs)
+		return ERR_PTR(-ENOMEM);
+
+	pxpcs->pdev = pdev;
+
+	dev_set_drvdata(&pdev->dev, pxpcs);
+
+	return pxpcs;
+}
+
+static int xpcs_rk_serdes_phy_init(struct dw_xpcs_rk *pxpcs)
+{
+	struct device *dev = &pxpcs->pdev->dev;
+
+	pxpcs->serdes_phy = devm_phy_get(dev, NULL);
+	if (IS_ERR(pxpcs->serdes_phy))
+		return dev_err_probe(dev, PTR_ERR(pxpcs->serdes_phy),
+					"Failed to get SerDes PHY\n");
+
+	return 0;
+}
+
+static void xpcs_rk_serdes_phy_poweroff(void *data)
+{
+	struct dw_xpcs_rk *pxpcs = data;
+	struct device *dev = &pxpcs->pdev->dev;
+
+	phy_power_off(pxpcs->serdes_phy);
+	phy_exit(pxpcs->serdes_phy);
+
+	dev_pm_genpd_rpm_always_on(dev, false);
+}
+
+static int xpcs_rk_serdes_phy_poweron(struct dw_xpcs_rk *pxpcs)
+{
+	struct device *dev = &pxpcs->pdev->dev;
+	int ret;
+
+	/*
+	 * The power domain is required and must be enabled, which allows us to
+	 * dynamically turn the CSR clock on/off using PM while keeping the PCS
+	 * powered on.
+	 */
+	ret = dev_pm_genpd_rpm_always_on(dev, true);
+	if (ret) {
+		dev_err(dev, "Failed to power on power-domains\n");
+		return ret;
+	}
+
+	ret = phy_init(pxpcs->serdes_phy);
+	if (ret) {
+		dev_err(dev, "Failed to init SerDes PHY\n");
+		goto pm_domain;
+	}
+
+	ret = phy_power_on(pxpcs->serdes_phy);
+	if (ret) {
+		dev_err(dev, "Failed to power on SerDes PHY\n");
+		goto serdes_phy;
+	}
+
+	ret = devm_add_action_or_reset(dev, xpcs_rk_serdes_phy_poweroff, pxpcs);
+	if (ret) {
+		dev_err(dev, "Failed to register devm for SerDes PHY: %d\n", ret);
+		return ret;
+	}
+
+	return 0;
+
+serdes_phy:
+	phy_exit(pxpcs->serdes_phy);
+pm_domain:
+	dev_pm_genpd_rpm_always_on(dev, false);
+	return ret;
+}
+
+static int xpcs_rk_init_res(struct dw_xpcs_rk *pxpcs)
+{
+	struct platform_device *pdev = pxpcs->pdev;
+	struct device *dev = &pdev->dev;
+	struct resource *res;
+
+	res = platform_get_resource(pdev, IORESOURCE_MEM, 0);
+	if (!res) {
+		dev_err(dev, "No reg-space found\n");
+		return -EINVAL;
+	}
+
+	if (resource_size(res) < SZ_2M) {
+		dev_err(dev, "Invalid reg-space size\n");
+		return -EINVAL;
+	}
+
+	pxpcs->reg_base = devm_ioremap_resource(dev, res);
+	if (IS_ERR(pxpcs->reg_base)) {
+		dev_err(dev, "Failed to map reg-space\n");
+		return PTR_ERR(pxpcs->reg_base);
+	}
+
+	return 0;
+}
+
+static void xpcs_rk_exit_clk(void *data)
+{
+	struct dw_xpcs_rk *pxpcs = data;
+	struct device *dev = &pxpcs->pdev->dev;
+
+	pm_runtime_force_suspend(dev);
+	clk_disable_unprepare(pxpcs->eee_clk);
+}
+
+static int xpcs_rk_init_clk(struct dw_xpcs_rk *pxpcs)
+{
+	struct device *dev = &pxpcs->pdev->dev;
+	unsigned long rate;
+	u64 mult;
+	int ret;
+
+	pxpcs->csr_clk = devm_clk_get(dev, "csr");
+	if (IS_ERR(pxpcs->csr_clk))
+		return dev_err_probe(dev, PTR_ERR(pxpcs->csr_clk),
+					 "Failed to get CSR clock\n");
+
+	pxpcs->eee_clk = devm_clk_get(dev, "eee");
+	if (IS_ERR(pxpcs->eee_clk))
+		return dev_err_probe(dev, PTR_ERR(pxpcs->eee_clk),
+					 "Failed to get EEE clock\n");
+
+	ret = clk_prepare_enable(pxpcs->eee_clk);
+	if (ret) {
+		dev_err(dev, "Failed to enable EEE clock\n");
+		return ret;
+	}
+
+	pm_runtime_set_suspended(dev);
+	pm_runtime_enable(dev);
+
+	ret = devm_add_action_or_reset(dev, xpcs_rk_exit_clk, pxpcs);
+	if (ret) {
+		dev_err(dev, "Failed to register devm for EEE clock: %d\n", ret);
+		return ret;
+	}
+
+	/*
+	 * Compute the multiplier for the EEE clock so that
+	 * clk_eee_period * (mult_fact + 1) falls within 80..120 ns.
+	 *
+	 * On RK3568, clk_xpcs_eee is muxed between gpll200 (200 MHz, 5 ns)
+	 * and cpll125 (125 MHz, 8 ns), selected by CRU_CLKSEL_CON29 bit 13.
+	 * The reset value is 0 (200 MHz), but derive the value at runtime to
+	 * stay correct if the mux is changed by a board.
+	 *
+	 * Use a 64-bit intermediate: on 32-bit builds, 100 * 200000000
+	 * does not fit in unsigned long. Clamp to the 4-bit
+	 * DW_VR_MII_EEE_MULT_FACT_100NS field. The mux only provides
+	 * 125 MHz or 200 MHz, so the rate cannot drop below the 5 MHz
+	 * threshold where DIV_ROUND_CLOSEST_ULL() would return 0 and the
+	 * subtraction below would underflow.
+	 */
+	rate = clk_get_rate(pxpcs->eee_clk);
+	if (!rate)
+		return dev_err_probe(dev, -EINVAL, "Invalid EEE clock rate\n");
+
+	mult = DIV_ROUND_CLOSEST_ULL(100ULL * rate, NSEC_PER_SEC) - 1;
+	pxpcs->eee_mult_fact = min_t(u64, mult, 15);
+	return 0;
+}
+
+static int xpcs_rk_init_bus(struct dw_xpcs_rk *pxpcs)
+{
+	struct device *dev = &pxpcs->pdev->dev;
+	static atomic_t id = ATOMIC_INIT(-1);
+	struct mii_bus *bus;
+	int ret;
+
+	bus = devm_mdiobus_alloc_size(dev, 0);
+	if (!bus)
+		return -ENOMEM;
+
+	bus->name = "Rockchip DW XPCS MCI/APB3";
+	bus->read = xpcs_rk_read_c22;
+	bus->write = xpcs_rk_write_c22;
+	bus->read_c45 = xpcs_rk_read_c45;
+	bus->write_c45 = xpcs_rk_write_c45;
+	bus->phy_mask = ~0;
+	bus->parent = dev;
+	bus->priv = pxpcs;
+
+	snprintf(bus->id, MII_BUS_ID_SIZE,
+		 "rockchip_dwxpcs-%x", atomic_inc_return(&id));
+
+	/*
+	 * MDIO-bus here serves as just a back-end engine abstracting out
+	 * the MDIO and MCI/APB3 IO interfaces utilized for the Rockchip DWXPCS CSRs
+	 * access.
+	 */
+	ret = devm_mdiobus_register(dev, bus);
+	if (ret) {
+		dev_err(dev, "Failed to create MDIO bus\n");
+		return ret;
+	}
+
+	pxpcs->bus = bus;
+	return 0;
+}
+
+static int xpcs_rk_probe(struct platform_device *pdev)
+{
+	struct dw_xpcs_rk *pxpcs;
+	int ret;
+
+	pxpcs = xpcs_rk_create_data(pdev);
+	if (IS_ERR(pxpcs))
+		return PTR_ERR(pxpcs);
+
+	/*
+	 * The XPCS lives in the PD_PIPE power domain. The domain must be
+	 * powered on before any register access, otherwise the SoC will
+	 * trigger a synchronous external abort (SError).
+	 *
+	 * Accessing the XPCS registers also requires a TX clock from the
+	 * SerDes, which is needed for the soft reset.
+	 */
+	ret = xpcs_rk_serdes_phy_init(pxpcs);
+	if (ret)
+		return ret;
+
+	ret = xpcs_rk_serdes_phy_poweron(pxpcs);
+	if (ret)
+		return ret;
+
+	ret = xpcs_rk_init_res(pxpcs);
+	if (ret)
+		return ret;
+
+	ret = xpcs_rk_init_clk(pxpcs);
+	if (ret)
+		return ret;
+
+	ret = xpcs_rk_init_bus(pxpcs);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static const struct of_device_id xpcs_rk_of_ids[] = {
+	{ .compatible = "rockchip,rk3568-xpcs" },
+	{ /* sentinel */ },
+};
+MODULE_DEVICE_TABLE(of, xpcs_rk_of_ids);
+
+struct dw_xpcs *xpcs_rk_create(struct device *dev, struct device_node *pcs, int port)
+{
+	struct platform_device *pdev;
+	struct dw_xpcs_rk *pxpcs;
+	struct dw_xpcs *xpcs;
+
+	if (!of_device_is_available(pcs))
+		return ERR_PTR(-ENODEV);
+
+	if (!of_match_node(xpcs_rk_of_ids, pcs))
+		return ERR_PTR(-EINVAL);
+
+	if (!xpcs_rk_mdio_addr_validate(port))
+		return ERR_PTR(-EINVAL);
+
+	pdev = of_find_device_by_node(pcs);
+	if (!pdev)
+		return ERR_PTR(-EPROBE_DEFER);
+
+	/*
+	 * Establish the device link before reading the supplier's drvdata.
+	 * device_link_add() does not fail on a supplier that is unbinding;
+	 * it creates the link in DL_STATE_SUPPLIER_UNBIND.
+	 *
+	 * The check below only confirms that the supplier is bound at this
+	 * point. It does not fully protect against a concurrent unbind
+	 * between here and xpcs_create_mdiodev(); closing that window would
+	 * require reading a managed link's status or device_lock(), neither
+	 * of which is acceptable on this path. The window is small and
+	 * requires an explicit unbind from userspace. Discussed on
+	 * driver-core.
+	 *
+	 * The link is released automatically when the consumer device is
+	 * destroyed (DL_FLAG_AUTOREMOVE_CONSUMER), so no explicit
+	 * device_link_remove() is needed on the failure paths.
+	 */
+	if (!device_link_add(dev, &pdev->dev, DL_FLAG_AUTOREMOVE_CONSUMER)) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	if (READ_ONCE(pdev->dev.links.status) != DL_DEV_DRIVER_BOUND) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	pxpcs = platform_get_drvdata(pdev);
+	if (!pxpcs || !pxpcs->bus) {
+		put_device(&pdev->dev);
+		return ERR_PTR(-EPROBE_DEFER);
+	}
+
+	xpcs = xpcs_create_mdiodev(pxpcs->bus, port);
+	if (IS_ERR(xpcs)) {
+		put_device(&pdev->dev);
+		return xpcs;
+	}
+
+	xpcs_config_eee_mult_fact(xpcs, pxpcs->eee_mult_fact);
+	put_device(&pdev->dev);
+	return xpcs;
+}
+EXPORT_SYMBOL_GPL(xpcs_rk_create);
+
+static int xpcs_rk_pm_runtime_suspend(struct device *dev)
+{
+	struct dw_xpcs_rk *pxpcs = dev_get_drvdata(dev);
+
+	clk_disable_unprepare(pxpcs->csr_clk);
+
+	return 0;
+}
+
+static int xpcs_rk_pm_runtime_resume(struct device *dev)
+{
+	struct dw_xpcs_rk *pxpcs = dev_get_drvdata(dev);
+
+	return clk_prepare_enable(pxpcs->csr_clk);
+}
+
+static int xpcs_rk_system_suspend(struct device *dev)
+{
+	/*
+	 * Keep the PD_PIPE power domain on during system suspend.
+	 *
+	 * PD_PIPE is shared with SATA/PCIe and would be powered down by
+	 * genpd once all its consumers are suspended, killing the SerDes
+	 * and breaking MAC WoL.  Mark the XPCS as part of the wakeup path
+	 * so genpd keeps the domain on.  Unconditional because the XPCS
+	 * core has no callback to convey the MAC WoL state.
+	 */
+	device_set_wakeup_path(dev);
+	return 0;
+}
+
+static int xpcs_rk_system_resume(struct device *dev)
+{
+	return 0;
+}
+
+static _DEFINE_DEV_PM_OPS(xpcs_rk_pm_ops,
+			  xpcs_rk_system_suspend, xpcs_rk_system_resume,
+			  xpcs_rk_pm_runtime_suspend, xpcs_rk_pm_runtime_resume,
+			  NULL);
+
+static struct platform_driver xpcs_rk_driver = {
+	.probe = xpcs_rk_probe,
+	.driver = {
+		.name = "rk_xpcs-dwxpcs",
+		.pm = pm_ptr(&xpcs_rk_pm_ops),
+		.of_match_table = xpcs_rk_of_ids,
+	},
+};
+module_platform_driver(xpcs_rk_driver);
+
+MODULE_DESCRIPTION("Rockchip XPCS platform device driver");
+MODULE_AUTHOR("Coia Prant <coiaprant@gmail.com>");
+MODULE_LICENSE("GPL");
diff --git a/include/linux/pcs/pcs-xpcs-rk.h b/include/linux/pcs/pcs-xpcs-rk.h
new file mode 100644
index 0000000000000..e3ca3d51f7c7e
--- /dev/null
+++ b/include/linux/pcs/pcs-xpcs-rk.h
@@ -0,0 +1,11 @@
+/* SPDX-License-Identifier: GPL-2.0 */
+#ifndef __LINUX_PCS_XPCS_ROCKCHIP_H
+#define __LINUX_PCS_XPCS_ROCKCHIP_H
+
+#include <linux/device.h>
+#include <linux/of.h>
+#include <linux/pcs/pcs-xpcs.h>
+
+struct dw_xpcs *xpcs_rk_create(struct device *dev, struct device_node *pcs, int port);
+
+#endif /* __LINUX_PCS_XPCS_ROCKCHIP_H */
-- 
2.47.3

[PATCH net-next v11 4/6] dt-bindings: net: rockchip-dwmac: document pcs-handle

[Coia Prant]

The Rockchip GMAC binding needs to describe the PCS reference used by
the SGMII support added later in this series. The property will be
parsed by rk_pcs_init(), and a missing phandle fails the probe. Add it
and require it when phy-mode is "sgmii" on rockchip,rk3568-gmac, the
only SoC in this binding that has SGMII support.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 .../bindings/net/rockchip-dwmac.yaml          | 27 +++++++++++++++++++
 1 file changed, 27 insertions(+)

diff --git a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
index 80c252845349c..c434450fd07ff 100644
--- a/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
+++ b/Documentation/devicetree/bindings/net/rockchip-dwmac.yaml
@@ -120,6 +120,12 @@ properties:
     maximum: 0x7F
     default: 0x10
 
+  pcs-handle:
+    description:
+      Specifies a reference to a node representing the PCS device
+      connected to this GMAC. Required when phy-mode is "sgmii".
+    maxItems: 1
+
   phy-supply:
     description: PHY regulator
 
@@ -159,6 +165,27 @@ allOf:
         clocks:
           minItems: 5
 
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-gmac
+    then:
+      required:
+        - phy-mode
+
+  - if:
+      properties:
+        compatible:
+          contains:
+            const: rockchip,rk3568-gmac
+        phy-mode:
+          contains:
+            const: sgmii
+    then:
+      required:
+        - pcs-handle
+
 unevaluatedProperties: false
 
 examples:
-- 
2.47.3

Re: [PATCH net-next v11 4/6] dt-bindings: net: rockchip-dwmac: document pcs-handle

[Rob Herring (Arm)]

On Fri, 09 Oct 2026 01:51:58 +0800, Coia Prant wrote:
> The Rockchip GMAC binding needs to describe the PCS reference used by
> the SGMII support added later in this series. The property will be
> parsed by rk_pcs_init(), and a missing phandle fails the probe. Add it
> and require it when phy-mode is "sgmii" on rockchip,rk3568-gmac, the
> only SoC in this binding that has SGMII support.
> 
> Signed-off-by: Coia Prant <coiaprant@gmail.com>
> ---
>  .../bindings/net/rockchip-dwmac.yaml          | 27 +++++++++++++++++++
>  1 file changed, 27 insertions(+)
> 

Reviewed-by: Rob Herring (Arm) <robh@kernel.org>

[PATCH net-next v11 5/6] net: stmmac: dwmac-rk: add SGMII support for RK3568

[Coia Prant]

The RK3568 SoC integrates a Synopsys DesignWare XPCS that can be
connected to GMAC0 or GMAC1 in SGMII mode.  Add the necessary glue
logic to support this configuration.

The current dwmac-rk driver does not support SGMII mode.  SGMII
requires a PCS to handle auto-negotiation and link state reporting,
but the existing driver only supports RGMII and RMII.

Add a set_to_sgmii() callback to configure the GMAC GRF register for
SGMII mode (bit 7 set, interface selection bits 4:6 ignored when set).
Also add a set_to_rmii() callback for rk3568 to explicitly clear bit 7,
since the new SGMII path leaves it set and the RMII branch previously
relied on the SoC reset value.

Provide pcs_init/pcs_exit callbacks to create/destroy the XPCS via
xpcs_rk_create() from the Rockchip XPCS platform driver, and a
select_pcs callback to return the XPCS to phylink.  The MII port passed
to xpcs_rk_create() is the GMAC id (bsp_priv->id): GMAC0 maps to port 0,
GMAC1 maps to port 1, matching the hardware routing.

SGMII is not added to rk_get_interfaces(): it comes from the XPCS's own
supported_interfaces, merged by stmmac_phylink_setup().

The SerDes PHY and the PD_PIPE power domain are owned by the XPCS
driver rather than managed through the stmmac
serdes_poweron/serdes_poweroff callbacks, which are legacy and meant
for single-MAC platforms. On RK3568 the XPCS is the natural owner of
the shared SerDes.

DWMAC_ROCKCHIP selects PCS_XPCS_ROCKCHIP. PCS_XPCS itself is already
selected by STMMAC_ETH, and PM is selected by ARCH_ROCKCHIP, so no
further selects are needed.

Reorder rk_gmac_powerup() so that gmac_clk_enable() is called before
the SGMII check.  The SGMII path skips rk_get_phy_intf_sel(), so the
clock must be enabled earlier to cover all register accesses in that
path.  While at it, unify the error unwinding into a single
clk_disable label and add error handling for the default (unhandled
interface) case.

SGMII In-band vs Out-of-band
============================
On RK3568, the MAC clock is fixed at 125 MHz and cannot be changed per
speed.  Out-of-band mode requires the MAC to change its clock to
125/25/2.5 MHz for 1000/100/10 Mbps respectively, which the hardware
does not support here.  The driver therefore clears rk_set_clk_tx_rate()
and the clock stays at 125 MHz.

The PCS is still told the speed in out-of-band mode (through a BMCR
write in xpcs_link_up_sgmii_1000basex()), but the MAC clock does not
follow.  At 10/100 Mbps this gives working TX and failing RX.

Enable default_an_inband for SGMII and clear rk_set_clk_tx_rate(), so
phylink uses in-band mode, where the PCS is responsible for
speed/duplex negotiation.

Note that default_an_inband can be overridden by a fixed-link node, and
phylink may also fall back to out-of-band if the PHY does not support
in-band signalling.  Out-of-band SGMII is not supported by this driver.
The only out-of-band configuration that would work is 1000BASE-X with a
fixed-link, where the MAC clock stays at 125 MHz; 10/100 Mbps gives
working TX and failing RX.  Boards must use in-band mode
(managed = "in-band-status" or an in-band capable PHY).

1000BASE-X is not enabled by this series; it may be added later if
there is a user for it.

Link: https://dl.radxa.com/rock3/docs/hw/datasheet/Rockchip%20RK3568%20TRM%20Part1%20V1.1-20210301.pdf (Page 386)
Reviewed-by: Maxime Chevallier <maxime.chevallier@bootlin.com>
Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 drivers/net/ethernet/stmicro/stmmac/Kconfig   |   1 +
 .../net/ethernet/stmicro/stmmac/dwmac-rk.c    | 131 +++++++++++++++---
 2 files changed, 112 insertions(+), 20 deletions(-)

diff --git a/drivers/net/ethernet/stmicro/stmmac/Kconfig b/drivers/net/ethernet/stmicro/stmmac/Kconfig
index e3dd5adda5aca..5088acc06982e 100644
--- a/drivers/net/ethernet/stmicro/stmmac/Kconfig
+++ b/drivers/net/ethernet/stmicro/stmmac/Kconfig
@@ -170,6 +170,7 @@ config DWMAC_ROCKCHIP
 	default ARCH_ROCKCHIP
 	depends on OF && (ARCH_ROCKCHIP || COMPILE_TEST)
 	select MFD_SYSCON
+	select PCS_XPCS_ROCKCHIP
 	help
 	  Support for Ethernet controller on Rockchip RK3288 SoC.
 
diff --git a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
index 72bdbcb5e863a..c4db919ec1640 100644
--- a/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
+++ b/drivers/net/ethernet/stmicro/stmmac/dwmac-rk.c
@@ -20,6 +20,7 @@
 #include <linux/delay.h>
 #include <linux/mfd/syscon.h>
 #include <linux/regmap.h>
+#include <linux/pcs/pcs-xpcs-rk.h>
 #include <linux/pm_runtime.h>
 
 #include "stmmac_platform.h"
@@ -47,6 +48,7 @@ struct rk_gmac_ops {
 	void (*set_to_rgmii)(struct rk_priv_data *bsp_priv,
 			     int tx_delay, int rx_delay);
 	void (*set_to_rmii)(struct rk_priv_data *bsp_priv);
+	void (*set_to_sgmii)(struct rk_priv_data *bsp_priv);
 	int (*set_speed)(struct rk_priv_data *bsp_priv,
 			 phy_interface_t interface, int speed);
 	void (*integrated_phy_powerup)(struct rk_priv_data *bsp_priv);
@@ -63,6 +65,7 @@ struct rk_gmac_ops {
 	bool clock_grf_reg_in_php;
 	bool supports_rgmii;
 	bool supports_rmii;
+	bool supports_sgmii;
 	bool php_grf_required;
 	bool regs_valid;
 	u32 regs[];
@@ -98,6 +101,7 @@ struct rk_priv_data {
 	bool integrated_phy;
 	bool supports_rgmii;
 	bool supports_rmii;
+	bool supports_sgmii;
 
 	struct clk_bulk_data *clks;
 	int num_clks;
@@ -809,6 +813,8 @@ static const struct rk_gmac_ops rk3528_ops = {
 #define RK3568_GRF_GMAC1_CON1		0x038c
 
 /* RK3568_GRF_GMAC0_CON1 && RK3568_GRF_GMAC1_CON1 */
+#define RK3568_GMAC_MODE_RMII_RGMII		GRF_CLR_BIT(7)
+#define RK3568_GMAC_MODE_SGMII_QSGMII		GRF_BIT(7)
 #define RK3568_GMAC_FLOW_CTRL			GRF_BIT(3)
 #define RK3568_GMAC_FLOW_CTRL_CLR		GRF_CLR_BIT(3)
 #define RK3568_GMAC_RXCLK_DLY_ENABLE		GRF_BIT(1)
@@ -836,6 +842,16 @@ static int rk3568_init(struct rk_priv_data *bsp_priv)
 	}
 }
 
+static void rk3568_set_to_rmii(struct rk_priv_data *bsp_priv)
+{
+	u32 con1;
+
+	con1 = (bsp_priv->id == 1) ? RK3568_GRF_GMAC1_CON1 :
+				     RK3568_GRF_GMAC0_CON1;
+
+	regmap_write(bsp_priv->grf, con1, RK3568_GMAC_MODE_RMII_RGMII);
+}
+
 static void rk3568_set_to_rgmii(struct rk_priv_data *bsp_priv,
 				int tx_delay, int rx_delay)
 {
@@ -851,19 +867,31 @@ static void rk3568_set_to_rgmii(struct rk_priv_data *bsp_priv,
 		     RK3568_GMAC_CLK_TX_DL_CFG(tx_delay));
 
 	regmap_write(bsp_priv->grf, con1,
+		     RK3568_GMAC_MODE_RMII_RGMII |
 		     RK3568_GMAC_RXCLK_DLY_ENABLE |
 		     RK3568_GMAC_TXCLK_DLY_ENABLE);
 }
 
+static void rk3568_set_to_sgmii(struct rk_priv_data *bsp_priv)
+{
+	u32 con1;
+
+	con1 = (bsp_priv->id == 1) ? RK3568_GRF_GMAC1_CON1 :
+				     RK3568_GRF_GMAC0_CON1;
+
+	regmap_write(bsp_priv->grf, con1, RK3568_GMAC_MODE_SGMII_QSGMII);
+}
+
 static const struct rk_gmac_ops rk3568_ops = {
 	.init = rk3568_init,
+	.set_to_rmii = rk3568_set_to_rmii,
 	.set_to_rgmii = rk3568_set_to_rgmii,
+	.set_to_sgmii = rk3568_set_to_sgmii,
+
 	.set_speed = rk_set_clk_mac_speed,
 
 	.gmac_phy_intf_sel_mask = GENMASK_U16(6, 4),
 
-	.supports_rmii = true,
-
 	.regs_valid = true,
 	.regs = {
 		0xfe2a0000, /* gmac0 */
@@ -1211,6 +1239,44 @@ static void rk_phy_powerdown(struct rk_priv_data *bsp_priv)
 		dev_err(bsp_priv->dev, "fail to disable phy-supply\n");
 }
 
+static int rk_pcs_init(struct stmmac_priv *priv)
+{
+	struct rk_priv_data *bsp_priv = priv->plat->bsp_priv;
+	struct device_node *node = priv->device->of_node;
+	struct device_node *pcs_node;
+	struct dw_xpcs *xpcs;
+
+	pcs_node = of_parse_phandle(node, "pcs-handle", 0);
+	if (!pcs_node)
+		return -ENODEV;
+
+	xpcs = xpcs_rk_create(priv->device, pcs_node, bsp_priv->id);
+	of_node_put(pcs_node);
+	if (IS_ERR(xpcs))
+		return PTR_ERR(xpcs);
+
+	priv->hw->xpcs = xpcs;
+	return 0;
+}
+
+static void rk_pcs_exit(struct stmmac_priv *priv)
+{
+	if (!priv->hw->xpcs)
+		return;
+
+	xpcs_destroy(priv->hw->xpcs);
+	priv->hw->xpcs = NULL;
+}
+
+static struct phylink_pcs *rk_select_pcs(struct stmmac_priv *priv,
+					 phy_interface_t interface)
+{
+	if (!priv->hw->xpcs)
+		return NULL;
+
+	return xpcs_to_phylink_pcs(priv->hw->xpcs);
+}
+
 static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
 					  struct plat_stmmacenet_data *plat,
 					  const struct rk_gmac_ops *ops)
@@ -1333,6 +1399,7 @@ static struct rk_priv_data *rk_gmac_setup(struct platform_device *pdev,
 
 	bsp_priv->supports_rgmii = ops->supports_rgmii || !!ops->set_to_rgmii;
 	bsp_priv->supports_rmii = ops->supports_rmii || !!ops->set_to_rmii;
+	bsp_priv->supports_sgmii = ops->supports_sgmii || !!ops->set_to_sgmii;
 
 	if (ops->init) {
 		ret = ops->init(bsp_priv);
@@ -1364,6 +1431,10 @@ static int rk_gmac_check_ops(struct rk_priv_data *bsp_priv)
 		if (!bsp_priv->supports_rmii)
 			return -EINVAL;
 		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		if (!bsp_priv->supports_sgmii)
+			return -EINVAL;
+		break;
 	default:
 		dev_err(bsp_priv->dev,
 			"unsupported interface %d", bsp_priv->phy_iface);
@@ -1382,16 +1453,19 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 	if (ret)
 		return ret;
 
+	ret = gmac_clk_enable(bsp_priv, true);
+	if (ret)
+		return ret;
+
+	if (bsp_priv->phy_iface == PHY_INTERFACE_MODE_SGMII)
+		goto set_mode;
+
 	ret = rk_get_phy_intf_sel(bsp_priv->phy_iface);
 	if (ret < 0)
-		return ret;
+		goto clk_disable;
 
 	intf = ret;
 
-	ret = gmac_clk_enable(bsp_priv, true);
-	if (ret)
-		return ret;
-
 	if (bsp_priv->gmac_phy_intf_sel_mask ||
 	    bsp_priv->gmac_rmii_mode_mask) {
 		/* If defined, encode the phy_intf_sel value */
@@ -1402,10 +1476,8 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 				      bsp_priv->gmac_rmii_mode_mask);
 
 		ret = rk_write_gmac_grf_reg(bsp_priv, val);
-		if (ret < 0) {
-			gmac_clk_enable(bsp_priv, false);
-			return ret;
-		}
+		if (ret < 0)
+			goto clk_disable;
 	}
 
 	if (bsp_priv->clock.rmii_mode_mask) {
@@ -1413,13 +1485,12 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 				     bsp_priv->clock.rmii_mode_mask);
 
 		ret = rk_write_clock_grf_reg(bsp_priv, val);
-		if (ret < 0) {
-			gmac_clk_enable(bsp_priv, false);
-			return ret;
-		}
+		if (ret < 0)
+			goto clk_disable;
 	}
 
-	/*rmii or rgmii*/
+set_mode:
+	/* rmii, rgmii, sgmii */
 	switch (bsp_priv->phy_iface) {
 	case PHY_INTERFACE_MODE_RGMII:
 		dev_info(dev, "init for RGMII\n");
@@ -1450,15 +1521,20 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 		if (bsp_priv->ops->set_to_rmii)
 			bsp_priv->ops->set_to_rmii(bsp_priv);
 		break;
+	case PHY_INTERFACE_MODE_SGMII:
+		dev_info(dev, "init for SGMII\n");
+		if (bsp_priv->ops->set_to_sgmii)
+			bsp_priv->ops->set_to_sgmii(bsp_priv);
+		break;
 	default:
 		dev_err(dev, "NO interface defined!\n");
+		ret = -EINVAL;
+		goto clk_disable;
 	}
 
 	ret = rk_phy_powerup(bsp_priv);
-	if (ret) {
-		gmac_clk_enable(bsp_priv, false);
-		return ret;
-	}
+	if (ret)
+		goto clk_disable;
 
 	pm_runtime_get_sync(dev);
 
@@ -1466,6 +1542,10 @@ static int rk_gmac_powerup(struct rk_priv_data *bsp_priv)
 		bsp_priv->ops->integrated_phy_powerup(bsp_priv);
 
 	return 0;
+
+clk_disable:
+	gmac_clk_enable(bsp_priv, false);
+	return ret;
 }
 
 static void rk_gmac_powerdown(struct rk_priv_data *gmac)
@@ -1605,6 +1685,17 @@ static int rk_gmac_probe(struct platform_device *pdev)
 	plat_dat->suspend = rk_gmac_suspend;
 	plat_dat->resume = rk_gmac_resume;
 
+	if (plat_dat->phy_interface == PHY_INTERFACE_MODE_SGMII) {
+		/* SGMII clock always runs at 125 MHz */
+		plat_dat->set_clk_tx_rate = NULL;
+
+		/* SGMII requires a PCS */
+		plat_dat->default_an_inband = true;
+		plat_dat->pcs_init = rk_pcs_init;
+		plat_dat->pcs_exit = rk_pcs_exit;
+		plat_dat->select_pcs = rk_select_pcs;
+	}
+
 	plat_dat->bsp_priv = rk_gmac_setup(pdev, plat_dat, data);
 	if (IS_ERR(plat_dat->bsp_priv))
 		return PTR_ERR(plat_dat->bsp_priv);
-- 
2.47.3

[PATCH net-next v11 6/6] MAINTAINERS: add entry for Rockchip XPCS driver

[Coia Prant]

Add a MAINTAINERS entry for the Rockchip RK3568 XPCS platform driver
and its device tree binding.

Include the relevant mailing lists (netdev and linux-rockchip) so that
future patches are properly distributed.

Signed-off-by: Coia Prant <coiaprant@gmail.com>
---
 MAINTAINERS | 9 +++++++++
 1 file changed, 9 insertions(+)

diff --git a/MAINTAINERS b/MAINTAINERS
index 65e8a4b5c90b1..2f0f46eabcf54 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -23757,6 +23757,15 @@ S:	Maintained
 F:	Documentation/devicetree/bindings/sound/rockchip,rk3576-sai.yaml
 F:	sound/soc/rockchip/rockchip_sai.*
 
+ROCKCHIP XPCS DRIVER
+M:	Coia Prant <coiaprant@gmail.com>
+L:	netdev@vger.kernel.org
+L:	linux-rockchip@lists.infradead.org
+S:	Maintained
+F:	Documentation/devicetree/bindings/net/pcs/rockchip,rk3568-xpcs.yaml
+F:	drivers/net/pcs/pcs-xpcs-rk.c
+F:	include/linux/pcs/pcs-xpcs-rk.h
+
 ROCKER DRIVER
 M:	Jiri Pirko <jiri@resnulli.us>
 L:	netdev@vger.kernel.org
-- 
2.47.3