* Re: dl2k: PCI parity error
[not found] <20060513165715.GA21243@cm.nu>
@ 2006-05-17 20:27 ` Jon Mason
0 siblings, 0 replies; only message in thread
From: Jon Mason @ 2006-05-17 20:27 UTC (permalink / raw)
To: Shane; +Cc: netdev
On Sat, May 13, 2006 at 09:57:15AM -0700, Shane wrote:
> Hello list,
>
> Not sure if this is the best place to report this. I seem
> to be having a conflict of sorts and believe it may be a
> dl2k issue. The card is a Dlink 550t gigabit pci-64 card.
> When connected to the pci-64 slot on the mb which shares an
> IRQ with the onboard SCSI controller, the SCSI subsystem
> starts reporting PCI parity errors. If I move the NIC to a
> pci-32 slot, the errors go away.
Do you have any other 64bit slots?
> scsi0: PCI error Interrupt at seqaddr = 0x9
> scsi0: Data Parity Error Detected during address or write data phase
> scsi1: PCI error Interrupt at seqaddr = 0x9
> scsi1: Data Parity Error Detected during address or write data phase
> scsi1: PCI error Interrupt at seqaddr = 0x9
> scsi1: Data Parity Error Detected during address or write data phase
> scsi0: PCI error Interrupt at seqaddr = 0x8
> scsi0: Data Parity Error Detected during address or write data phase
> scsi0: WARNING WARNING WARNING WARNING
> scsi0: Too many PCI parity errors observed as a target.
> scsi0: Some device on this bus is generating b ad parity.
> scsi0: This is an error *observed by*, not *generated by*, this controller.
> scsi0: PCI parity error checking has been disabled.
>
> This is using a 2.6.15.4 kernel but I can certainly update
> if that will help. Is this likely a dl2k issue? The
> driver does seem a bit dated.
The driver is mostly unmaintained. I did a fix a month or so ago which
fixed a DMA free issue, but that doesn't sound like the problem you have
here.
There is another error I am seeing that I haven't had time to track
down, where the adapter appears to be DMA'ing somewhere its not supposed
to.
I would be suprised if either of these caused a SCSI data parity error.
Thanks,
Jon
>
> Tia,
> Shane
>
> --
> http://www.cm.nu/~shane/
> -
> To unsubscribe from this list: send the line "unsubscribe netdev" in
> the body of a message to majordomo@vger.kernel.org
> More majordomo info at http://vger.kernel.org/majordomo-info.html
^ permalink raw reply [flat|nested] only message in thread