[PATCH] 3c5zz ethernet: fix section warnings

[PATCH] 3c5zz ethernet: fix section warnings

[Randy.Dunlap]

From: Randy Dunlap <rdunlap@xenotime.net>

Priority: not critical; makes init code discardable.

Fix section mismatch warnings:
WARNING: drivers/net/3c501.o - Section mismatch: reference to .init.text:el1_probe from .text between 'init_module' (at offset 0x812) and 'cleanup_module'
WARNING: drivers/net/3c503.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x661) and 'cleanup_card'
WARNING: drivers/net/3c505.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x228d) and 'cleanup_module'
WARNING: drivers/net/3c507.o - Section mismatch: reference to .init.text:el16_probe from .text between 'init_module' (at offset 0xa99) and 'cleanup_module'
WARNING: drivers/net/3c523.o - Section mismatch: reference to .init.text: from .text between 'init_module' (at offset 0x12e7) and 'cleanup_module'
WARNING: drivers/net/3c527.o - Section mismatch: reference to .init.text:mc32_probe from .text between 'init_module' (at offset 0xd8d) and 'cleanup_module'

Signed-off-by: Randy Dunlap <rdunlap@xenotime.net>
---
 drivers/net/3c501.c |    2 +-
 drivers/net/3c503.c |    2 +-
 drivers/net/3c505.c |    2 +-
 drivers/net/3c507.c |    2 +-
 drivers/net/3c523.c |    2 +-
 drivers/net/3c527.c |    2 +-
 6 files changed, 6 insertions(+), 6 deletions(-)

--- linux-2617-rc6.orig/drivers/net/3c501.c
+++ linux-2617-rc6/drivers/net/3c501.c
@@ -909,7 +909,7 @@ MODULE_PARM_DESC(irq, "EtherLink IRQ num
  * here also causes the module to be unloaded
  */
  
-int init_module(void)
+int __init init_module(void)
 {
 	dev_3c501 = el1_probe(-1);
 	if (IS_ERR(dev_3c501))
--- linux-2617-rc6.orig/drivers/net/3c503.c
+++ linux-2617-rc6/drivers/net/3c503.c
@@ -688,7 +688,7 @@ MODULE_LICENSE("GPL");
 
 /* This is set up so that only a single autoprobe takes place per call.
 ISA device autoprobes on a running machine are not recommended. */
-int
+int __init
 init_module(void)
 {
 	struct net_device *dev;
--- linux-2617-rc6.orig/drivers/net/3c505.c
+++ linux-2617-rc6/drivers/net/3c505.c
@@ -1633,7 +1633,7 @@ MODULE_PARM_DESC(io, "EtherLink Plus I/O
 MODULE_PARM_DESC(irq, "EtherLink Plus IRQ number(s) (assigned)");
 MODULE_PARM_DESC(dma, "EtherLink Plus DMA channel(s)");
 
-int init_module(void)
+int __init init_module(void)
 {
 	int this_dev, found = 0;
 
--- linux-2617-rc6.orig/drivers/net/3c507.c
+++ linux-2617-rc6/drivers/net/3c507.c
@@ -932,7 +932,7 @@ module_param(irq, int, 0);
 MODULE_PARM_DESC(io, "EtherLink16 I/O base address");
 MODULE_PARM_DESC(irq, "(ignored)");
 
-int init_module(void)
+int __init init_module(void)
 {
 	if (io == 0)
 		printk("3c507: You should not use auto-probing with insmod!\n");
--- linux-2617-rc6.orig/drivers/net/3c523.c
+++ linux-2617-rc6/drivers/net/3c523.c
@@ -1277,7 +1277,7 @@ MODULE_PARM_DESC(io, "EtherLink/MC I/O b
 MODULE_PARM_DESC(irq, "EtherLink/MC IRQ number(s)");
 MODULE_LICENSE("GPL");
 
-int init_module(void)
+int __init init_module(void)
 {
 	int this_dev,found = 0;
 
--- linux-2617-rc6.orig/drivers/net/3c527.c
+++ linux-2617-rc6/drivers/net/3c527.c
@@ -1646,7 +1646,7 @@ static struct net_device *this_device;
  *	insmod multiple modules for now but it's a hack.
  */
 
-int init_module(void)
+int __init init_module(void)
 {
 	this_device = mc32_probe(-1);
 	if (IS_ERR(this_device))


---