Netdev List
 help / color / mirror / Atom feed
From: Stephen Hemminger <shemminger@vyatta.com>
To: Herbert Xu <herbert@gondor.apana.org.au>
Cc: "David S. Miller" <davem@davemloft.net>, netdev@vger.kernel.org
Subject: Re: bridge: Eliminate unnecessary forward delay
Date: Mon, 4 Aug 2008 10:35:34 -0700	[thread overview]
Message-ID: <20080804103534.6b7896d9@extreme> (raw)
In-Reply-To: <20080804170439.GA13546@gondor.apana.org.au>

On Tue, 5 Aug 2008 01:04:39 +0800
Herbert Xu <herbert@gondor.apana.org.au> wrote:

> Hi:
> 
> bridge: Eliminate unnecessary forward delay
> 
> When the forward delay is set to zero, we still delay the setting
> of the forwarding state by one or possibly two timers depending
> on whether STP is enabled.  This could either turn out to be
> instantaneous, or horribly slow depending on the load of the
> machine.
> 
> As there is nothing preventing us from enabling forwarding straight
> away, this patch eliminates this potential delay by executing the
> code directly if the forward delay is zero.
> 
> The effect of this problem is that immediately after the carrier
> comes on a port, the bridge will drop all packets received from
> that port until it enters forwarding mode, thus causing unnecessary
> packet loss.
> 
> Note that this patch doesn't fully remove the delay due to the
> link watcher.  We should also check the carrier state when we
> are about to drop an incoming packet because the port is disabled.
> But that's for another patch.
> 
> Signed-off-by: Herbert Xu <herbert@gondor.apana.org.au>
> 

Same again, this time compile tested...

--- a/net/bridge/br_stp.c	2008-08-04 10:20:21.000000000 -0700
+++ b/net/bridge/br_stp.c	2008-08-04 10:29:26.000000000 -0700
@@ -368,14 +368,25 @@ static void br_make_blocking(struct net_
 /* called under bridge lock */
 static void br_make_forwarding(struct net_bridge_port *p)
 {
-	if (p->state == BR_STATE_BLOCKING) {
-		if (p->br->stp_enabled == BR_KERNEL_STP)
-			p->state = BR_STATE_LISTENING;
-		else
-			p->state = BR_STATE_LEARNING;
+	struct net_bridge *br = p->br;
 
-		br_log_state(p);
-		mod_timer(&p->forward_delay_timer, jiffies + p->br->forward_delay);	}
+	if (p->state != BR_STATE_BLOCKING)
+		return;
+
+	if (br->forward_delay == 0) {
+		p->state = BR_STATE_FORWARDING;
+		br_topology_change_detection(br);
+		del_timer(&p->forward_delay_timer);
+	}
+	else if (p->br->stp_enabled == BR_KERNEL_STP)
+		p->state = BR_STATE_LISTENING;
+	else
+		p->state = BR_STATE_LEARNING;
+
+	br_log_state(p);
+
+	if (br->forward_delay != 0)
+		mod_timer(&p->forward_delay_timer, jiffies + br->forward_delay);
 }
 
 /* called under bridge lock */

  parent reply	other threads:[~2008-08-04 17:35 UTC|newest]

Thread overview: 7+ messages / expand[flat|nested]  mbox.gz  Atom feed  top
2008-08-04 17:04 bridge: Eliminate unnecessary forward delay Herbert Xu
2008-08-04 17:27 ` Stephen Hemminger
2008-08-04 17:32   ` Herbert Xu
2008-08-04 17:35 ` Stephen Hemminger [this message]
2008-08-05  2:12   ` Herbert Xu
2008-08-05  8:40     ` David Miller
2008-08-05  8:55       ` Herbert Xu

Reply instructions:

You may reply publicly to this message via plain-text email
using any one of the following methods:

* Save the following mbox file, import it into your mail client,
  and reply-to-all from there: mbox

  Avoid top-posting and favor interleaved quoting:
  https://en.wikipedia.org/wiki/Posting_style#Interleaved_style

* Reply using the --to, --cc, and --in-reply-to
  switches of git-send-email(1):

  git send-email \
    --in-reply-to=20080804103534.6b7896d9@extreme \
    --to=shemminger@vyatta.com \
    --cc=davem@davemloft.net \
    --cc=herbert@gondor.apana.org.au \
    --cc=netdev@vger.kernel.org \
    /path/to/YOUR_REPLY

  https://kernel.org/pub/software/scm/git/docs/git-send-email.html

* If your mail client supports setting the In-Reply-To header
  via mailto: links, try the mailto: link
Be sure your reply has a Subject: header at the top and a blank line before the message body.
This is a public inbox, see mirroring instructions
for how to clone and mirror all data and code used for this inbox